ed3ab5e212
Fix M24 not starting new job ( #12887 )
6 years ago
f9299c4461
Make timer definition in pin files for STM32 possible ( #12874 )
...
RemRam needs to redefine a particular timer to work correctly. The HAL did foresee this possibility and checks if the timer was already defined for either the stepper or temperature timer.
Prior to this commit the header file for the timers couldn't see those definitions in the pin file, but this commit will fix this.
Tested on an actual hardware to verify. (It wouldn't boot without it.)
6 years ago
082f6a27de
ADAPTIVE_FAN_SLOWING extension to hotend thermal protection ( #12853 )
6 years ago
459f4fef60
Fix Temperature::init bug with HEATER_4_PIN
6 years ago
a403d9a50c
Improve menu pause / resume ( #12876 )
6 years ago
432c21456f
Add 3DFabXYZ Migbot example config ( #12775 )
...
Co-Authored-By: Alain Martel <alain74martel@gmail.com>
6 years ago
fb8111553e
getStatus => report_status
6 years ago
2919f3045d
[LPC176x] Update PIO extrascript ( #12878 )
6 years ago
19fea772e5
Use E_AXIS_N where it makes sense
6 years ago
0d30ccf767
Tweaks to TMC26XStepper
6 years ago
1fd8e2c649
Fix: Junction Deviation calculates wrong cos(theta) on CoreXY ( #12879 )
6 years ago
b402040059
Split bed size sanity check into two
6 years ago
1d33784bf9
Add RUMBA32 Board ( #12856 )
6 years ago
a0ef6198ff
Level bed corners Z-hop height option ( #12858 )
6 years ago
8ae6f1e556
Fix errors and some compiler warnings with HAL_STM32 PlatformIO build ( #12869 )
6 years ago
e6484d9dab
Return to status when SD card is removed
6 years ago
5f2d75f45b
Move PINS_DEBUGGING to @section develop
6 years ago
da42f27c9e
Use maths macros for ceil/floor
6 years ago
de4561c980
VORON Add LCD option BEEP_ON_FEEDRATE_CHANGE ( #12822 )
6 years ago
709a6356f7
Remove obsolete test conditions ( #12829 )
6 years ago
bcf347403b
Fix M106 extruder & fan count ( #12820 )
6 years ago
ba7e35cbab
Add LCD option BEEP_ON_FEEDRATE_CHANGE ( #12774 )
6 years ago
d372e7e477
SDIO support for STM32F1 ( #12782 )
6 years ago
6a8fb0f25f
Simplify backlash compensation code. ( #12813 )
...
- Use `TEST(dm,axis)` to determine directions instead of doing comparisons.
- Remove recomputation of `millimeters` and `delta_mm` since backlash compensation should not affect the distance over which material is extruded.
6 years ago
7f244f9b9c
Update LPC SD pins for BIQU SKR ( #12767 )
...
(Exactly matching the Azteeg X5 MINI Wifi)
6 years ago
813a4ea107
Add support for Mks Robin TFT display ( #12706 )
...
* Add support for MKS Robin TFT display
- Add support for MKS Robin TFT display and encoder for MKS Robin board.
- Generic 128x64 UI with x2 upscale is used (for now).
- Tested on MKS Robin TFT V2.0 with ST7789V controller.
6 years ago
c4237b529f
Fix MKS Mini and SD card conflct over SPI mode ( #12783 )
6 years ago
01f75591c6
Fix GTM32_PRO_VB Serial and HAL via watchdog ( #12753 )
...
Move `watchdog_reset` from `.h` to `.cpp` to eliminate the need to include `MarlinConfig.h` in a HAL-related file.
6 years ago
288340cb6c
Followup to VORON
6 years ago
2aaa681dea
Remove unused Cheaptronic pins
6 years ago
81e753064a
Fix ExtUI compile warnings and error ( #12799 )
6 years ago
74c47803f7
Add VORON printer ( #12705 )
6 years ago
637fb20c75
Allow 4 fan animation frames ( #12772 )
6 years ago
d9cf5e4883
Update pins_BIQU_SKR_V1.1.h ( #12758 )
6 years ago
cb643d87df
Adding missing code for triple Z-stepper auto-align ( #12786 )
6 years ago
14a7faf087
Fix compile warning comparison uint and int ( #12788 )
6 years ago
60cb36bef3
Misc. improvements ( #12747 )
...
* Make ExtUI respect MAXTEMP limits
- Temperatures are now clamped by MAXTEMP limits rather than arbitrary values.
* Speed up USB init, add status
- Speed up USB initialization
- Show status message if init failed
* Enable status messages for EXTENSIBLE_UI
* Adjust max limit to MAX_TEMP - 15
* Misc. tweaks to formatting, const, etc.
6 years ago
4f2473053c
Fix M106 with SINGLENOZZLE
6 years ago
7557f8d68c
Rename all Stm32f1 to STM32F1 ( #12639 )
6 years ago
371d9a1acf
Fix line-endings, formatting, whitespace
...
Followup to #12770
6 years ago
135c74017c
Fix compile DEBUG_EEPROM_READWRITE error ( #12746 )
6 years ago
54ba44ee37
Fix bad sanitycheck ( #12748 )
6 years ago
b01a630bd0
[2.0.x] Correct Ender 3 bed size ( #12769 )
6 years ago
44ed34475b
Add MKS BASE 1.4 pins ( #12770 )
6 years ago
3a16cb6d7f
Slightly Slower Max X Axis speed
...
On some T-Rex 2+ machines the previous max step rate could lose steps....
6 years ago
814d93c7cf
Fix G33 sprintf output warning ( #12738 )
6 years ago
3877bf9704
Fix compile error with delta and sensorless homing ( #12740 )
6 years ago
cfc5e96b4b
Move JD to Config.h (and fix jerk->eeprom bug) ( #12720 )
6 years ago
594898aea7
Limit hotend / bed temperature to maxtemp-15 ( #12713 )
6 years ago
530ef5846f
Make nomove=false for toolchange on filament swap ( #12739 )
6 years ago
14ddda285c
Confirmation on Abort SD print ( #12717 )
6 years ago
f8c5d31864
Bugfix 2.0.x add motherboard pins define ( #12689 )
...
- `pins_BIQU_B300_V1.0.h` defines pins for B300, as found in the BIQU Thunder 3D printer.
- `pins_BIQU_SKR_V1.1.h` defines pins for bigtree/BIQU SKR V1.1 motherboard.
6 years ago
b7a8dcc35d
Update Formbot T-Rex 3 pins ( #12662 )
6 years ago
f7127c44f8
Wanhao Duplicator i3 Plus pins create ( #12701 )
6 years ago
33abb86b7e
Add support for MKS Robin board ( #12650 )
...
Implement initial support for MKS Robin (STM32F103ZET6) board.
Custom build script is used to generate encrypted firmware compatible with original MSK Robin bootloader (i.e. safe firmware update from SD card and possibility to go back to original close-source firmware).
6 years ago
367a9f65aa
Add Formbot 350c Thermistor ( #12661 )
6 years ago
33f3c75213
GTM32 Pro VB FAN-PIN correction ( #12666 )
6 years ago
9d59a9c840
Followup to #12691 (typo)
6 years ago
3829d6ccf8
FYSETC F6 13 - E2_SERIAL_TX_PIN correction ( #12667 )
6 years ago
d35dcafa3d
Added MKS MINI 12864 support to FYSETC F6 V1.3 ( #12656 )
6 years ago
98cf546771
Limit set hotend temperature to maxtemp. ( #12690 )
6 years ago
4dad489a50
[2.0.x] Limit PID autotune target to maxtemp-15 ( #12691 )
6 years ago
8dcc28c9ae
Squelch warning mentioned in #11061 ( #12676 )
6 years ago
4c8a6eee7b
[2.0.x] Update Czech translation ( #12683 )
6 years ago
fcaed685b2
[2.0.x] Set DEFAULT_NOMINAL_FILAMENT_DIA to 1.75 in Anet A6 config ( #12664 )
6 years ago
0572be9439
[2.0.x] Enable PIDTEMPBED in Anet A8 example config ( #12655 )
6 years ago
c6e09c2689
[2.0.x] G33 clean up ( #12648 )
...
Remove obsolete workarounds in G33 for the now fixed zprobe_zoffset bug
6 years ago
7a5e637a37
Add spreadCycle parameter sets ( #12645 )
6 years ago
902d5b0f8b
Allow ExtUI to use LCD_SET_PROGRESS_MANUALLY ( #12628 )
6 years ago
9a4a463ec4
Sanity-check LIGHTWEIGHT_UI, move comment up ( #12630 )
6 years ago
55144284c2
TMC connection test, spreadCycle parameters, improved debugging ( #12616 )
6 years ago
97de9d54a5
Fix broken pins file include ( #12617 )
6 years ago
a7b3a61424
Improve some config comments readability ( #12615 )
6 years ago
daf07e4200
Align classic bed icon consistently
6 years ago
3bb8b3529a
Center ABL grid on bed with H parameter. ( #12610 )
6 years ago
6cf8d40f41
Fix some serial echos of pin states
6 years ago
f6321f878a
Simpler AVR + Trinamic + Soft Serial sanity-check ( #12606 )
6 years ago
7d15854514
Add Z_MIN_PROBE_PIN to MKS SBASE pins
6 years ago
e8bda62d2a
Followup to servo angles patch
...
Fix #12594
6 years ago
18fedafbc5
Refresh screen on SD Init
6 years ago
b22716e938
M425 Backlash Correction ( #11061 )
6 years ago
fa47ce369a
Sanity-check for negative steps, feedrate, accel
6 years ago
ef81b5f03e
Link to font docs in ultralcd_DOGM.cpp
6 years ago
4388015f1a
Tweak config formatting
6 years ago
b7e38ea249
Signal an invalid mesh for M420 enable / load
6 years ago
50b2fbd031
Trinamic: Split stealthChop, improve driver monitoring, etc. ( #12582 )
6 years ago
9fbd73d931
Fix up some delta settings
6 years ago
0947b92734
Build and CI fixes and optimizations ( #12584 )
...
-Disable LDF "deep+" mode on AT90USB platforms. Appears not needed any longer (likely due to fix 7322df26ad
6 years ago
11c7945365
Don't include STM32 Core code when compiling STM32 Generic ( #12575 )
6 years ago
64389acdf1
Print a space after scrolling status
6 years ago
7a361ad36a
Alternative fan image option ( #12579 )
...
* Alternative fan bitmap
* Move bed over by 3px
6 years ago
261c6f4b96
Fix pause/resume SD print
...
Followup to #12551 , addressing #12566
6 years ago
2224a4d61a
Remove AVR-only MARLIN_DEV_MODE code
6 years ago
e874f9664c
Tweaks to endstops code
6 years ago
3c58b16c9f
Move stepper enable/disable to stepper_indirection.h ( #12562 )
6 years ago
aaf862aef2
Fix angles for disabled EDITABLE_SERVO_ANGLES ( #12559 )
6 years ago
c986239837
A single SERIAL_ECHO macro type ( #12557 )
6 years ago
69d869c3d9
Tweak FR icon. Update font data.
6 years ago
0c1cd9f590
Fix "No SD Card" indicator
6 years ago
8be91677df
Fix Skew factors ( #12555 )
...
- Ensure Skew factors are calculated from test square measurements
6 years ago
InsanityAutomation