Erik van der Zalm
d8a0c6450f
Split the configuration file in two parts.
...
One for common settings.
One for advanced settings.
13 years ago
Erik van der Zalm
f9c5333f97
Made "stop heating wait" optional.
...
Default off.
13 years ago
Erik van der Zalm
9f139d6e0e
Added MAX6675 support. (Thanks to gregfrost)
...
Needs some work to remove the blocking in read max6675.
13 years ago
Erik van der Zalm
e45e5c68bb
Added support for Gen3+ (Pins file only)
...
Added late z enable. (blddk request)
Only calculate look ahead if >2 moves in buffer.
Removed some FORCE_INLINE to save memory.
Signed-off-by: Erik van der Zalm <erik@vdzalm.eu>
13 years ago
Bernhard
212515148e
added m240 photography support. default off
13 years ago
Bernhard
415aadf704
lcd panel bed support
...
advance and ultipanel not any more in default config
13 years ago
Erik van der Zalm
84d9cf7339
merging
13 years ago
Erik van der Zalm
e017228569
Merged multiple extruder support.
...
Soft PWM. (Sanguinololu can also have PID temperature control)
Interrupt save WRITE for addresses > 0x0FF
13 years ago
Bernhard
01001b89d2
repaired nozzle runout prevention to not collide with automatic stepper disabeling.
13 years ago
Bernhard
88ee053af0
heating up santity, formarly knows as "watchdog", but renamed due to the existance of the real watchdog, works now.
13 years ago
Bernhard
2bc5e7ec9e
prevent too long extrudes, or too cold extrudes
13 years ago
Bernhard
aa4f9a6474
better values.
13 years ago
Bernhard
87fd249c43
made runout prevention independent of tempeorarily set esteps
13 years ago
Bernhard
1ec0c3b68a
extruder runout prevention.
13 years ago
Bernhard
5b4625f79c
added a partial release option to "m84" aka "stepper release". If you do tiny layers, you might want to keep the z-axis powered to not loose height positioning after homeing.
13 years ago
Denis B
4fd75dc813
Working version of multiple extruders (up to 3)
...
- The temperature control is pretty much complete
(not sure what to do w/ autotemp though)
Changed the pins assignment to clearly separate bed and extruder heaters
and temp sensors, changed a bit how termistor tables are handled.
- The steppers control is rudimentary
(only chanages what pins it uses depending on the active_extruder var,
but that's enough for switching extruder in the start.gcode in the
the profiles)
- Tested only w/ RAMPS 1.4
13 years ago
Erik van der Zalm
b99c49ec3b
Add option to only check endstop when homing
13 years ago
Erik van der Zalm
95a0b28acb
Merge branch 'Marlin_v1', remote-tracking branch 'origin/Marlin_v1' into Marlin_v1
13 years ago
Erik van der Zalm
af22e9cd38
Some advance modifications
13 years ago
Bernhard
4f909963e4
make QUICKHOME configureable
13 years ago
Erik van der Zalm
6b86f15686
More 2nd extruder implementation. (Not usable)
...
Advance (not tested)
13 years ago
Bernhard
59205ac5fc
preliminiary implementation for the early heating finish.
...
Might be replaced by something more clever, e.g. by erik, and does not yet support the second extruder or the bed.
its kind of not so cool, because you need 6 more ints.
Maybe isheating() should use the degrees directly, as it is not used in time-critical anyways.
Then it would be much easier. to have the offsets without additional variables.
13 years ago
Erik van der Zalm
f75f426dfa
Removed interrupt nesting in the stepper ISR.
...
Add serial checkRx in stepper ISR.
Copied HardwareSerial to MarlinSerial (Needed for checkRx).
13 years ago
Erik van der Zalm
aad4b75b94
First parts 2nd extruder
13 years ago
Bernhard
a0dc66f7bf
Home retract distance configureable per axis.
13 years ago
Bernhard
6d6f323535
make an option if sd-card stop should release the steppers.
13 years ago
Bernhard
74d0032e25
cooldown blocking selectable by #define.
13 years ago
Erik van der Zalm
c0f8c9fd72
Seperate ENDSTOP_INVERTING for X Y and Z
...
Added simple endstop filter.
Corrected M114 count display.
13 years ago
Erik van der Zalm
2e43f9c809
Changed min max temperature code.
13 years ago
Bernhard Kubicek
8a1e719a3f
overworked config file
13 years ago
Bernhard Kubicek
f52e1a9571
autotemp working, default=disabled.
13 years ago
Bernhard Kubicek
70650c331d
corrected the ultimaker default values, the previous had a calculation error: see: http://groups.google.com/group/ultimaker/browse_thread/thread/91906788639703cf
13 years ago
Erik van der Zalm
b15902d3b5
Fixed bug in configuration.h
13 years ago
Erik van der Zalm
e63e224a33
Merge remote-tracking branch 'origin/Marlin_v1' into Marlin_v1
...
Conflicts:
Marlin/Configuration.h
Marlin/Marlin.pde
13 years ago
Erik van der Zalm
e7dca8614b
Advance experiments. Not working yet.
13 years ago
Bernhard Kubicek
46f80e82d9
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1
...
Conflicts:
Marlin/ultralcd.h
13 years ago
Bernhard Kubicek
a9c7da06e3
and changed ultipanel to have the mm/sec and not mm/min
...
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1
Conflicts:
Marlin/Marlin.pde
Marlin/ultralcd.h
13 years ago
Bernhard Kubicek
7919a40d06
watchdog,percent done,
13 years ago
Erik van der Zalm
805d37f77b
Fixed some small planner bugs
13 years ago
Erik van der Zalm
5fd41ae872
Some fixes in planner
13 years ago
Erik van der Zalm
95126c09c0
Added slowdown
13 years ago
Erik van der Zalm
331e82dcd3
Buffer size > 16
13 years ago
Erik van der Zalm
c00eefb824
Merge remote-tracking branch 'origin/Marlin_v1' into Marlin_v1
13 years ago
Erik van der Zalm
1d0452f10c
250000 baud
13 years ago
Bernhard Kubicek
c57906b627
fixed bug with adjusting ki in realtime.
13 years ago
Erik van der Zalm
ac82411c73
Merge remote-tracking branch 'origin/Marlin_v1' into Marlin_v1
13 years ago
Erik van der Zalm
65934eee9c
A lot of changes in the planner code
13 years ago
Bernhard Kubicek
36958ee305
minor changes and first not-well working version of autotemp
13 years ago
Bernhard Kubicek
27361e7cd0
beautified the config. ordered it into thematic sections.
13 years ago
Erik van der Zalm
d3bfffcb6e
Corrected thermistor naming
13 years ago