2254 Commits (abd7fc36b68796413ca421a3e9d30bec93a7cdcf)

Author SHA1 Message Date
Scott Lahteine 04328d7537 Add zprobe_zoffset in set_bed_level_equation_*
- Also a small tweak to SanityCheck.h
10 years ago
Scott Lahteine d2e73545ba Merge pull request #1705 from AnHardt/ddt
Avoid warnings in SanitiCheck.h
10 years ago
Scott Lahteine 78090275a9 Fix probe range editing
- Increase the probe offset range to -20…20
- Apply the range limits to the menu item
10 years ago
AnHardt 1ff6df8f9e Avoid warnings in SanitiCheck.h
/SanityCheck.h:107:53: warning: missing terminating ' character
...
10 years ago
AnHardt ebe5b87c2c < like in the oher compareble loops
to avoid:
Marlin_main.cpp:1790: warning: array subscript is above array bounds.
10 years ago
AnHardt 20f909567a Merge https://github.com/MarlinFirmware/Marlin into tm-utf-minus-kanji
Conflicts:
	README.md
Solved
10 years ago
Christian Bohn eab5fad539 code formatting 10 years ago
Scott Lahteine abadeac08d Group zprobe_zoffset with bed leveling 10 years ago
Scott Lahteine 9e8427f253 Merge pull request #1698 from zeuseye/Development
Clean "fromsd" array if not SDSUPPORT
10 years ago
Scott Lahteine 32331faee4 Prettify Bed Level Correction Matrix
- Put + in front of positive values in the output
10 years ago
Scott Lahteine f5f4c2b366 Merge branch 'Development' into fixup_leveling
Latest upstream commits
10 years ago
Scott Lahteine 7667023817 Merge pull request #1694 from Wurstnase/fix_z_config
comment #define Z_DUAL_STEPPER_DRIVERS
10 years ago
Scott Lahteine 5eff15c409 Merge branch 'Development' into fixup_leveling
Latest upstream commits
10 years ago
Scott Lahteine ad05a726c1 Merge pull request #1691 from AnHardt/PID_dt
Move definition of PIDdT back to temperature.h
10 years ago
Scott Lahteine 5261d35737 Fix custom m-code behavior
Don’t set CUSTOM_M_CODE_SET_Z_PROBE_OFFSET if there’s no Z probe
10 years ago
Scott Lahteine fbf9b21e0c Merge plus fixup zprobe_zoffset
- Make `zprobe_zoffset` conditional
- Fix ConfigurationStore for `zprobe_zoffset`
10 years ago
Scott Lahteine 96b5da7198 Fix up bed leveling code
- Init `zprobe_zoffset`
- Remove `current_position[Z_AXIS] = zprobe_zoffset` lines from the
`set_bed_level_equation_*` functions
- Apply standards to `mesh_bed_leveling` files
- Document `MESH_BED_LEVELING`
10 years ago
Scott Lahteine 02b4f5f9cd Merge pull request #1689 from AnHardt/MAXand161
Fix MAX6675 again and introduce set_current_temp_raw()
10 years ago
AnHardt f680e509c4 Enclosed error-messages for TEMP_SENSOR_1_AS_REDUNDANT in PSTR() 10 years ago
Victor Torre d43d47da14 Clean "fromsd" array is not SDSUPPORT
if not have SDSUPPORT the fromsd array is not necessary
10 years ago
AnHardt ac81b4084f Make variables and function static. 10 years ago
alexborro 55025558dc Implement Dry-Run mode in G29
It just probe all the bed without appliying the matrix.
Useful after a first G29 to check the topology.
10 years ago
wurstnase a4ad9117dd comment #define Z_DUAL_STEPPER_DRIVERS 10 years ago
chris-bo 2dfd0e5ce7 Update Configuration.h
documentation how to disable buzzer feedback
10 years ago
Christian Bohn 4c3cbc0961 use only one implementation for beeper feedback 10 years ago
AnHardt 01cc97a3c3 Corected condition for PIDdT 10 years ago
AnHardt 94330705c7 Move definition of PIDdT back to temperature.h
make it unconditional
remove all definitions in the 'Configuration.h's
remove form 'Conditionals.h'
10 years ago
AnHardt dd0067afa6 Fix MAX6675 again and introduce set_current_temp_raw()
to make the temperature-code work again with Arduino 1.0.6.

Sorry could not make an extra block on base level.
10 years ago
AnHardt 8848b7e9ef Add the missed {} to END_MENU in ultralcd.cpp
what caused an extra update of encoderLine most of the time.
10 years ago
AnHardt 4beffbca69 Make SMALL_INFOFONT configurable.
Tweak the documentation
10 years ago
alexborro c2ba5d0c09 Fix ZigZag and Topograph table
ZigZag: Inverted Behavior.. If T supplied, it does not zigzag.
Topograph table: The table was rotated 90º clockwise.
10 years ago
alexborro 0ce3576685 New Feature: Z_DUAL_ENDSTOPS
Z_DUAL_ENDSTOPS is a feature to enable the use of 2 endstops for both Z
steppers - Let's call them Z stepper and Z2 stepper.
That way the machine is capable to align the bed during home, since both
Z steppers are homed.
There is also an implementation of M666 (software endstops adjustment)
to this feature.
After Z homing, this adjustment is applied to just one of the steppers
in order to align the bed.
One just need to home the Z axis and measure the distance difference
between both Z axis and apply the math: Z adjust = Z - Z2.
If the Z stepper axis is closer to the bed, the measure Z > Z2 (yes, it
is.. think about it) and the Z adjust would be positive.
Play a little bit with small adjustments (0.5mm) and check the
behaviour.
The M119 (endstops report) will start reporting the Z2 Endstop as well.
10 years ago
AnHardt c686069ccd Revert "Remove 6x9 font"
This reverts commit e6cb8ee188.

Conflicts:
	Marlin/dogm_lcd_implementation.h
Confilkt solved
Needs rework.
10 years ago
AnHardt b00a531df8 Revert "Removed now unneded FONT_STATUSMENU"
This reverts commit 8c5bb38748.
10 years ago
AnHardt 9d589cbb2a Merge https://github.com/MarlinFirmware/Marlin into tm3-utf-minus-kanji
Conflicts:
	Marlin/example_configurations/delta/generic/Configuration.h
	Marlin/example_configurations/delta/kossel_mini/Configuration.h
	Marlin/language.h

Conflicts solved
10 years ago
Scott Lahteine 8db4fd7177 Merge branch 'Development' into planner_oh_planner
Latest upstream commits
10 years ago
Scott Lahteine 0d81abe1c9 Merge branch 'Development' into config_testing
Latest upstream commits
10 years ago
Scott Lahteine 01740fd9c6 Merge branch 'Development' into planner_oh_planner
Latest upstream commits
10 years ago
Scott Lahteine fc53e43de6 Don't test raw temp for MAX6675
- Remove test of raw temp for thermistor 0 when using MAX6675
- Longer `raw_temp_value` array for `TEMP_SENSOR_1_AS_REDUNDANT`
10 years ago
Scott Lahteine 03fa9fae9f Merge branch 'Development' into fix_temperature_minmax
Latest upstream commits
10 years ago
Scott Lahteine 1fac388664 Revert measurement loop 10 years ago
nicolas-rambaud 37cde8a191 Report changes from previous PR from old code base including :
I've updated the minimum values from the LCD.
It has been a while that i want to at least fix this.
I have an inductive probe and often i need to set my zOffset to something lower than 0.5.
With the current implementation, the default LCD value is set to 0.5 for some reason.
On my case i need to be able to set it down to 0.0 as my inductive probe can be lower than 0.5.
Before with the LCD we couldn't change this value below 0.5. We had to flash the firmware every time which was painful.
Now we are able to change this value down to 0.0 if needed.
I've also changed the minimum value for Z min acceleration.
In the default configuration it's set to 25 but on the LCD the minimum was 100 which is not coherent.
I've changes the minimum to 10. On this axis, depending on the mechanics/motor drivers we might require very low acceleration, so i guess 10 is somehow realistic.
10 years ago
Scott Lahteine b26a3ea02c Merge pull request #1662 from josla972/refactor_scara
Refactor SCARA calibration. Save some lines of code and possibly ROM.
10 years ago
wurstnase e6f6c6e3a1 fix bad insertion config again 10 years ago
Scott Lahteine 6bdee87be3 Cleanup temperature code
- Get rid of unused temp states in the ISR, resulting in more frequent
temperature reading with fewer sensors
- Shrink code slightly in min/max testing
10 years ago
Scott Lahteine 34a41648ab Merge branch 'Development' into planner_oh_planner
Latest upstream commits
10 years ago
Scott Lahteine 4fbb80567e Get upstream commits 10 years ago
Scott Lahteine 7717e1ce33 Fix bad insert in configuration 10 years ago
Scott Lahteine 146501215f Fix mangled probe_pt calls
- Address issue #1669
- Remove the TOPO_ORIGIN configuration setting
10 years ago
maverikou 15345cc249 Corrected Z_PROBE_ALLEN_KEY behaviour. 10 years ago
maverikou 0f034dd97e Clean up Z_RAISE_AFTER_PROBING to work the same in all code paths except Z_PROBE_SLED. 10 years ago
maverikou 6c96f32069 Blind fix for #1507 10 years ago
Josef Larsson 379348487e Removed malplaced comment. 10 years ago
Scott Lahteine 8bd6e37b21 Merge pull request #1661 from thinkyhead/G92_no_offset
Don't add home offsets in G29
10 years ago
Scott Lahteine 582cd780cd Fix compile error with `*_DUAL_STEPPER_DRIVERS`
- Patch up macros in stepper.cpp
10 years ago
Josef Larsson 9b3462f73f Refactor SCARA calibration. Save some lines of code and possibly ROM. 10 years ago
Scott Lahteine 691e753cc3 Don't add home offsets in G29
- Address #1262 by leaving values as set
- Rename `add_homing` to `home_offset`
10 years ago
Scott Lahteine 88e81a4804 Latest upstream commits, plus fixes
- Also add Manual Bed Leveling to the rest of the configs
10 years ago
Scott Lahteine 15eb5d35a2 Merge branch 'Development' into config_testing
Latest upstream commits
10 years ago
Scott Lahteine 19df90622b Include Conditionals.h file in update 10 years ago
Scott Lahteine 9b639b4135 Merge pull request #1619 from epatel/manual-bed-leveling+mesh-bed-level
Manual bed leveling + mesh bed leveling
10 years ago
Scott Lahteine 2c9bd15625 Move LCD items to `Conditionals.h`
- `Conditionals.h` is included twice, setting LCD values the first time
10 years ago
Scott Lahteine 63abeaff38 Merge branch 'Development' into config_testing
Latest upstream commits
10 years ago
Scott Lahteine 3703694e30 Fix temperature min/max test
- Base tests on all thermistors/thermocouples, not just heater 0
10 years ago
Edward Patel 3d0a060a7a Added G29 command 10 years ago
Edward Patel c516747847 Merge branch 'Development' into manual-bed-leveling+mesh-bed-level 10 years ago
Scott Lahteine af14c684b5 Minor optimizations to planner code
- Prefetch values used more than once
10 years ago
Scott Lahteine 13fbf42d95 Cleanup of planner code
- Use named axis indexes, `X_AXIS` etc.
- Replace `block.steps_A` with block.steps[A]`
- Replace `A_segment_time` with `segment_time[A]`
- Add `A_AXIS`, `B_AXIS` for `COREXY` axes
- Conditional compile based on `EXTRUDERS`
- Add BLOCK_MOD macro for planner block indexes
- Apply coding standards to `planner.h` and `planner.cpp`
- Small optimizations of planner code
- Update `stepper.cpp` for new `block` struct
- Replace `memcpy` with loops, let the compiler unroll them
- Make `movesplanned` into an inline function
10 years ago
AnHardt 64e3d33893 Fix shrinked menucode
by updating 'encoderPosition' in END_MENU() line 1.
10 years ago
Edward Patel a7e89d4cfa Merge branch 'Development' into manual-bed-leveling+mesh-bed-level 10 years ago
AnHardt 8c5bb38748 Removed now unneded FONT_STATUSMENU 10 years ago
Scott Lahteine 2176a22d42 Fix count_direction initializer
- Addressing #1625
10 years ago
AnHardt e72cb3e45d Merge https://github.com/MarlinFirmware/Marlin into tm2-utf-minus-kanji
Conflicts:
	Marlin/dogm_lcd_implementation.h
	Marlin/ultralcd_implementation_hitachi_HD44780.h

Fix merge conflicts 2
10 years ago
Scott Lahteine cb6942d4a7 Merge branch 'Development' into config_testing
Get upstream commits
10 years ago
AnHardt 6bfccaf99e Merge https://github.com/MarlinFirmware/Marlin into tm2-utf-minus-kanji
Conflicts:
	Marlin/dogm_lcd_implementation.h
	Marlin/ultralcd_implementation_hitachi_HD44780.h
Fixed conflicts 1
10 years ago
Scott Lahteine 5644ad6809 Fix hiliting of edit items 10 years ago
Scott Lahteine 63d5d28085 Merge branch 'Development' into config_testing
Latest upstream changes
10 years ago
Scott Lahteine 526a755a66 Merge pull request #1652 from AnHardt/PIDdebug
PID debug
10 years ago
Scott Lahteine a1c240b0a4 Delta supports some auto bed leveling options 10 years ago
Edward Patel 5112cf8422 Added comment for the EEPROM storage 10 years ago
Edward Patel 4619d80524 Merge branch 'Development' into manual-bed-leveling+mesh-bed-level 10 years ago
Scott Lahteine 199151a4ed Merge pull request #1650 from AnHardt/beautify
Beautivy statusscreen
10 years ago
Scott Lahteine 2424713a8f Merge pull request #1640 from AnHardt/warning6
codepos not used in gcode_M28()
10 years ago
Scott Lahteine b6d381f863 Divide up Conditionals to get LCD items early 10 years ago
AnHardt e85061d20d Added changes to the 'new' Configuration.h s 10 years ago
Scott Lahteine 33c7c6e11d Conditionals.h requires Arduino.h 10 years ago
Scott Lahteine 8ade04b78e Felix and Hephestos configs
- Not sure why these are showing as all new
10 years ago
Scott Lahteine 670006b919 Remove invariant code from Configurations
- Add `Conditionals.h` with calculated configuration values
- Add `SanityCheck.h` with checks for configuration errors
- Remove equivalent code from all configurations
- Move error checks from some sources to `SanityCheck.h` also
- Fix initialization of count_direction in stepper.cpp
10 years ago
Edward Patel a61f679568 Merge branch 'Development' into manual-bed-leveling+mesh-bed-level 10 years ago
Edward Patel c87faa69ed Shortened mesh_plan_buffer_line() 10 years ago
AnHardt 47c1ea72af Merge https://github.com/kieranc/Marlin into PIDdebug
Conflicts:
	Marlin/temperature.cpp

Cleaned merge conflict.

Codeposition had changed.
Variable pid_input had vanished.

Signed-off-by: AnHardt <github@kitelab.de>
10 years ago
AnHardt f1d3d1524d Merge branch 'optimize_menu_code' of https://github.com/thinkyhead/Marlin into beautify
Conflicts:
	Marlin/dogm_lcd_implementation.h

solved merge conflict.
10 years ago
AnHardt fa889cd6e1 Beautivy statusscreen
by shifting things some pixels around
10 years ago
Scott Lahteine 7279e4f82f Small code tweaks re lcd.print 10 years ago
Scott Lahteine 90ba61b9b8 Include indicator for new drawmenu_generic
In the new method we pass the character that should be used for
selected state, not the character to print always.
10 years ago
Scott Lahteine 15d29efad5 Pass sel to lcd_implementation_mark_as_selected
- Pass selected state directly to lcd_implementation_mark_as_selected
- Rename sel function parameter
- Include a minor fix for SdBaseFile.h
10 years ago
Scott Lahteine a547dc2148 Merge branch 'Development' into optimize_menu_code
Get upstream changes
10 years ago
alexborro e650d4044e Fix "Stop Print" function in the LCD menu
When one hit "Stop Print" option in LCD menu, the command buffer was not
cleared. The printer keep moving until the buffer has been emptied.
Actually I could not clear the command buffer as well.. I don't know
why, it doesnt work as expected.
I need to implement a routine inside Stepper ISR to handle such
situation.
10 years ago
AnHardt e917477fec Merge https://github.com/MarlinFirmware/Marlin into tm-utf-minus-kanji
Conflicts:
	Marlin/dogm_lcd_implementation.h
	Marlin/fonts/make_fonts.bat

Claerd conflicts with my own #1621. (His was easy. :-) )

corrected typo in fonts/README.fonts

Applied changes to the new delta-configurations
 and deletet there some extra whitespace at the line-endings.
10 years ago
AnHardt ae01a6b5f2 Make use of codepos.
Saves one addition.
Needs one pointer on the stack.

Don't know if this is a go trade.
10 years ago
Scott Lahteine a534ac197a Merge pull request #1621 from AnHardt/remove--6x9-font
Remove 6x9 font
10 years ago
Scott Lahteine 80e0ee10ca Merge pull request #1631 from AnHardt/iss1593
Decrease KILL_DELAY
10 years ago
Scott Lahteine 4ce79920e5 Merge pull request #1635 from AnHardt/warnings1
Negative times are unlikly
10 years ago
Scott Lahteine 76127b8a55 Merge pull request #1630 from Wurstnase/fix_g29
optional parameters must be named when ignoring order
10 years ago
Scott Lahteine be3f2dc1d9 Merge pull request #1636 from AnHardt/warning2
lcd_control_retract_menu() is conditional.
10 years ago
Scott Lahteine 8d396584bf Merge pull request #1637 from AnHardt/warning3
lcd_autostart_sd() has two conditions.
10 years ago
Scott Lahteine 8664c6d465 Merge pull request #1638 from AnHardt/warning4
delta[3] not used when DELTA not defined.
10 years ago
Scott Lahteine 10711ccc6a Merge pull request #1639 from AnHardt/warning5
G4 could wait for an undefined time
10 years ago
Edward Patel 28c91deb5c EEPROM saving of z_values.
Tried to make it a little intelligent.
10 years ago
Edward Patel 240b5cfe04 Merge branch 'Development' into manual-bed-leveling+mesh-bed-level 10 years ago
alexborro 4521f6655b Restore "S" parameter of M204 for retrocompatibility. 10 years ago
alexborro 5ddb8d94e2 Update Documentation related to M204 10 years ago
AnHardt f8c4d43886 delta[3] is used with SCARA
Shoot in the dark.
10 years ago
AnHardt 72a9fed4fb codepos not used in gcode_M28()
Got:
Marlin_main.cpp:2567: warning: unused variable 'codepos'

Needs revision.
Don't now how this should look like.
10 years ago
AnHardt b94dd33641 G4 could wait for an undefined time
Got:
Marlin_main.cpp:1689: warning: 'codenum' may be used uninitialized in this function

And indeed codenum is undefined when no parameter is given.
10 years ago
AnHardt e90985a4e8 delta[3] not used when DELTA not defined.
got:
Marlin_main.cpp:387: warning: 'delta' defined but not used

Compiles cleaner when definition is removed.
10 years ago
AnHardt 5099b86ad4 lcd_autostart_sd() has two conditions.
got:
ultralcd.cpp:408: warning: 'void lcd_autostart_sd()' defined but not used
10 years ago
AnHardt 5d81c779cc lcd_control_retract_menu() is conditional.
Got:
ultralcd.cpp:64: warning: 'void lcd_control_retract_menu()' declared 'static' but never defined
10 years ago
AnHardt 450b89e63c Negative times are unlikly
While bunting an other bug I stumbled across:
ultralcd.cpp:1250: warning: comparison between signed and unsigned
integer expressions
Changed to the type of lcd_next_update_millis.
10 years ago
AnHardt d1658eebfc Decrease KILL_DELAY
Users hat to press kill-button for unexpexted lon times.
See #1593
10 years ago
Wurstnase 00adb2a6c1 optional parameters must be named when ignoring order 10 years ago
Edward Patel 0d43898a22 Remove of mesh_plan_buffer_line parameter reference (e) 10 years ago
Edward Patel 8067a985ce Merge branch 'Development' into manual-bed-leveling+mesh-bed-level
Fixed conflicts:
	Marlin/planner.h
10 years ago
wurstnase 05333f61b7 fix macro 10 years ago
AnHardt 1883e1bb60 Applied thinkyheads corrections from 2015-03-17 10 years ago
AnHardt be79235ef2 Add new (cleaner) Marlin font
with sources in /fonts
10 years ago
Scott Lahteine 89fe77468d Merge pull request #1586 from maverikou/delta_auto_bed_level
Delta auto bed level (Updated PR)
10 years ago
alexborro cb676cdf39 Fix CoreXY homing bug introduced by PR #1606
The Check Endstop logic must be:

if (current_block->steps_x != current_block->steps_y || (TEST(out_bits,
X_AXIS) == TEST(out_bits, Y_AXIS)))
if (TEST(out_bits, X_HEAD))

not

if (TEST(out_bits, X_HEAD) && (current_block->steps_x !=
current_block->steps_y || (TEST(out_bits, X_AXIS) == TEST(out_bits,
Y_AXIS))))

Same applies for Y axis.
10 years ago
AnHardt 8a29dd4839 Cleaned typo in dogm_lcd_implementation.h 10 years ago
AnHardt 7e69f72db6 Moved font directory. Updated README.fonts 10 years ago
AnHardt 00b162a993 Merge remote-tracking branch 'origin/utf-kanji' into tm-utf-minus-kanji
Conflicts:
	Marlin/language.h
Conflict cleaned
10 years ago
AnHardt e38dd5f030 Merge remote-tracking branch 'origin/utf' into utf-kanji 10 years ago
AnHardt 08e4651ece Corrected cyrillic font again
Thank you @Nprod.
10 years ago
Wurstnase 752c804677 remove offset, add minimum scan area 10 years ago
Wurstnase 14f0250853 allow negative values
and some more comments
10 years ago
AnHardt e6cb8ee188 Remove 6x9 font
in dogm_lcd_implementation.h
by using standard font and
shifting down temperature displays by one pixel
Saves 2300 bytes.
10 years ago
maverikou e93eb3e8d3 Update test 10 years ago
maverikou b8ae3feb9e Update test 10 years ago
maverikou 3570447ded Fix Z_RAISE_AFTER_PROBING 10 years ago
maverikou 8a739b6fba Merge branch 'Development' into delta_auto_bed_level
Conflicts:
	Marlin/Marlin_main.cpp
10 years ago
Scott Lahteine 7629c4f05c Cleanup for menu optimization
- Compare pr_char to space
- Fewer calls to lcd_strlen
10 years ago
Scott Lahteine 3405f85a6a Reduce size of menu code
- Get rid of _selected functions, passing selected state instead
10 years ago
Edward Patel e983a5ab92 Disable option. Enable for use/test. 10 years ago
Edward Patel f34b9c83d1 Added comment about MESH_NUM axis points. 10 years ago
Scott Lahteine a686c9878f Move TOPO_ORIGIN define to Configuration.h
- Addressing issue #1608
10 years ago
Edward Patel 8005d22c81 Added menu option for bed leveling. 10 years ago
Edward Patel 0e51e53813 WIP. Adding bed leveling code. 10 years ago
Scott Lahteine d0d12962e0 Merge pull request #1615 from AnHardt/fix-1611
Fix #1611
10 years ago
AnHardt f0dcea7e14 Fix #1611
Warning: suggest parentheses around comparison in operand of &

pretty much helped.
10 years ago
AnHardt 28b1c37dea Fix for #1612 10 years ago
AnHardt 2f374f1465 Removed Kanji. 10 years ago
Scott Lahteine 5efc798642 Merge pull request #1546 from apollo-ng/pr-felix
Added support for Felix 2.0/3.0 printers
10 years ago
Scott Lahteine b83e52e50f Merge pull request #1467 from thinkyhead/marlin_configurator
Configurator utility
10 years ago
Scott Lahteine 7bc77dc134 Merge pull request #1583 from galexander1/m404fix
M404 should not use 'N' address as parameter because 'N' is reserved
10 years ago
Scott Lahteine b80ed51fcc Fix controllerFan() code
- Add support for 4th extruder
- Fix parentheses matching
- Apply coding standards
- Address issue mentioned at #1575
10 years ago
Scott Lahteine 4b50205f11 Merge branch 'Development' into marlin_configurator
Latest upstream changes
10 years ago
Scott Lahteine bb4cb1b15a Merge pull request #1606 from thinkyhead/cleanup_stepper
Cleanup of stepper.cpp
10 years ago
Scott Lahteine 63f41f56f8 Merge pull request #1607 from chris-bo/Development
Update ultralcd_st7920_u8glib_rrd.h
10 years ago
Scott Lahteine 4eabd80025 Fix babystep for extruder_duplication 10 years ago
alexborro d3259d0dba Merge pull request #1581 from msutas/Development
Filament Runout Sensor Feature
10 years ago
AnHardt 25c4f17e5d Corrected Cyrillic fonts. Round II. 10 years ago
chris-bo b73ba26b23 Update ultralcd_st7920_u8glib_rrd.h 10 years ago
Scott Lahteine c37f7d15c9 - Rename WRITE_E_STEP for consistency
- Add BIT and TEST macros
- Add _APPLY_ macros to stepper.cpp to help with consolidation
- Consolidate code in stepper.cpp using macros
- Apply standards in stepper.cpp
- Use >= 0 instead of > -1 as a better semantic
- Replace DUAL_Y_CARRIAGE with Y_DUAL_STEPPER_DRIVERS
10 years ago
AnHardt 44a205d9d9 Corrected Cyrillic fonts.
Cleaned typo in language_test.h Cyrillic part.
10 years ago
chrono 4d878b9bac Fixed path typos in README 10 years ago
chrono 12ec557a75 Added DEFAULT_TRAVEL_ACCELERATION 10 years ago
chrono 1d25d510bc Upstream Merge Fixes 10 years ago
chrono a89d690b77 Merge remote-tracking branch 'upstream/Development' into pr-felix 10 years ago
Scott Lahteine cb57fc727d Declare pid_output for PIDBEDTEMP 10 years ago
Scott Lahteine 3d6deb9bdf Simplify manage_heater
- Make separate get_pid_output(e) and get_pid_output_bed() function
- Reduce size of manage_heater function
- Hopefully work around linker errors
10 years ago
AnHardt 730497aaa1 Make use of ligatures in language_kana_utf8.h 10 years ago
AnHardt 3240d89f7d Logic cleanup in utf_mapper. 10 years ago
alexborro 2f3c77b751 Fix decimal places in G29 Bed Equation Coeficients 10 years ago
AnHardt 96f8d20f2f Change selection logic another time
Automatic selection was to unflexible.

Updated documentation

Updated language files to new logic and documentation.

Updated bdf2u8g.exe
10 years ago
Wurstnase 76da32b567 add hash-bang for python3 10 years ago
Wurstnase 2e7ba44633 some renaming for readability 10 years ago
Scott Lahteine 352aa3f4c5 Merge branch 'Development' into marlin_configurator
Latest upstream
10 years ago
Scott Lahteine e3ca9137b5 Fix missing temp_error declarations
- Fix for #1591 replacing #1595
10 years ago
Wurstnase 0620267ebb g29 auto-mode for the new G29 LRFB
short:
this script scans the first few lines from a gcode. If the line between 2 different z are greater than min_g1 this is our first layer. On this layer we search the min and max values of X and Y. With an offset we write that in a new file.
10 years ago
Scott Lahteine 08694339eb Merge branch 'Development' into marlin_configurator
Conflicts:
	Marlin/Configuration.h
10 years ago
Scott Lahteine e4d77a6313 Merge pull request #1554 from 2PrintBeta/Development
Macro indirection for stepper drivers + Support for TMC26X and L6470 Stepper Drivers
10 years ago
Mehmet Sutas b373826428 Merge pull request #2 from MarlinFirmware/Development
update
10 years ago
AnHardt 5bafb1fe1f Add user test to language_test.h and make it default.
Improve description in Configuration.h
10 years ago
alexborro c0b6075f77 Fix max acceleration limits in planner
The max acceleration limiting was in wrong place.
10 years ago
alexborro 9157cbd8f3 Add Travel Acceleration and change the M204 options
Added option to set Travel Acceleration (non printing moves).
The M204 options was a non sense (S for printing moves and T for retract
moves).

It has been changed to:
P = Printing moves
R = Retract only (no X, Y, Z) moves
T = Travel (non
printing) moves

I will add this info o G-Code wiki in reprap.org. I also advise to put
this info in Marlin next version changelog.
10 years ago
alexborro 888cf161bd fix travel speed option for G29
I forgot to enclousure the variable with #ifdef
10 years ago
alexborro af63b54562 Add travel speed option to G29 command line 10 years ago
AnHardt 817751d4b9 Added new languages, the Cyrillic display and a test language to find out your hardware. 10 years ago
AnHardt c4b0087f7a Insert utf_mapper.h
Top -> down
- Decide what output function is to use.
- Precautions. If non of the DISPLAY_CHARSET_HD44780's is selected fall back to Japanese.
- When we are not on the dogms setup a mapping table depending on display type and mapper.
- If we are on dogm we use ONE To ONE mapping - except kanji.
- select and define one of the mapping functions.
10 years ago
AnHardt b60761bcff Removed some messages that shouldn't be translated in the Japanese files.
And made falback to kana work.
10 years ago
AnHardt 97ae3c5c6a Corected some errors inrtoduced by a faild global replacement. 10 years ago
AnHardt ae76b1e8a8 Changes in dogm_lcd_implementation.h in detail.
Top -> down
- We don't need the old Marlion_font package any more - we made new.
- But we need information about configured fonts and the mappers.
- We support Cyrillic now.
- LCD_CLASS is not used in this file. LiquidCrystalRus.h is deleted anyway.
- define some fonts
- BIG_EDIT_FONT works only together with western languages.
- Select a matching FONT for the MENUE depending on the defined language.
- Number the different font-types. Wanted to avoid to store complete font-structures when changing fonts back and forth.
- Marlin special symbols are now at the lower end - like in 'ultralcd_implementation_hitachi_HD44780.h'
- insert the new remembering setFont function.
- insert the new counting lcd_print functions.
- make use of the new setFont and lcd_print functions.
- On some places redefined one character long strings with chars to avoid overhead and reduce warnings.
10 years ago
alexborro 5bf42066fa Fix typo in configuration.h 10 years ago
alexborro 8a4b62d081 Set more regular setup in configuration.h 10 years ago
AnHardt 255ca68123 Changes in ultralcd_implementation_hitachi_HD44780.h in detail
Top -> down:
We don't need LiquidCrystalRus.cpp and LiquidCrystalRus.h any more. Functionality is now in utf_mapper.h
Comment on LCD_STR_BEDTEMP about behaviour in strings.
Change LCD_STR_ARROW_RIGHT from "\x7E" to ">" because "\x7E" is only ARROW_RIGHT on displays with DISPLAY_CHARSET_HD44780_JAPAN.
Introduce the counting UTF8 enabled lcd_print functions.
Replace the old lcd.print functions and make use of them.
A bit of reformatting around the changes.
10 years ago
alexborro 60ceca1bc1 Add speed configuration for home-bumping movement 10 years ago
AnHardt 6fc2ccd568 Make use of new remenbering fontswitch. 10 years ago
AnHardt 0f26f3abf2 Add a test_language.
Will show the compleet utf8 or ASCII charset
To se the second half of ASCII click on "01234..."
10 years ago
AnHardt 901cf203fe Add legal stuff to marlin_kanji.h 10 years ago
AnHardt 2d5134b0ed Introduce - clean - prepae language files 10 years ago