Jonathan Bastien-Filiatrault
46b9988e26
Search and replace failure.
12 years ago
Jonathan Bastien-Filiatrault
36b452c7ac
Remove abbrs.
12 years ago
Jonathan Bastien-Filiatrault
3cbaad9288
RepRapDiscount Smart Controller pin definitions.
12 years ago
Robert F-C
65c9a0728f
Set default serial port back to 0.
12 years ago
Robert F-C
ab9d183024
Make serial port configurable.
...
This change makes the choice of serial port configurable so that
wireless capability can be easily added by connecting Bluetooth modules
(such as BlueSmirf or JY-MCU) to the expansion port pins.
12 years ago
brupje
326423719f
Add support for Megatronics
12 years ago
ErikZalm
36a746d7d5
Merge pull request #244 from markfinn/pidbed
...
PID for heated bed
12 years ago
Mark Finn
04631d2250
cleanup for pull
12 years ago
ZetaPhoenix
c6caa45ae2
Limit Switch locations based on MIN/MAX limits and homing direction
...
fixes #246
Added statements to set the limit switch positions to the maximum travel if homing in the positive direction as well as bed center at (0,0) if defined.
Relocated code based on feedback.
12 years ago
ZetaPhoenix
dc566d654f
fixes #246
...
Added statements to set the limit switch positions to the maximum travel if homing in the positive direction as well as bed center at (0,0) if defined.
12 years ago
Mark Finn
9698f4ea64
bed pid
...
Conflicts:
Marlin/Configuration.h
12 years ago
Erik vd Zalm
e358a2d7af
Added fix for SF Arc Point fillet procedure
12 years ago
tonokip
1c1fddc7ac
Added support for the Rambo reprap electronics board. Added Mcodes to set
...
motor current and microstepping pins.
12 years ago
Erik vd Zalm
5406c533db
Disable FAST_PWM by default. On some systems it does not work ok.
13 years ago
Dabble63
6b45e9f167
Add Duty Cycling to the Heater Bed
13 years ago
Chris Palmer
538189cc19
Fixed soft limits when the origin is in the middle.
...
HOME_POS is now always where the endstop is and can be outside the limits.
The limits are now defined by MIN_POS and MAX_POS rather than HOME_POS and MAX_LENGTH.
The Z is axis now homed first if direction is away from the bed.
Saguinololu limit pins change from MIN to MAX according to the homing direction.
13 years ago
Erik van der Zalm
ea2c19f978
Added CoreXY support (Thanks Ilan Moyer)
13 years ago
Erik van der Zalm
aa65fe22ed
decoupled axes sucessfully at least on pure x or y jog
13 years ago
Bernhard
0c123950e9
__ header file replace
13 years ago
Bernhard
0e5e249ab5
added individual pullup setting option to have finer control in case there is a special z-min sensor, for example
13 years ago
Bernhard Kubicek
6b14f95b3e
Merge pull request #170 from linagee/Marlin_v1
...
Marlin v1
13 years ago
linagee
fbd282b3ba
Update Marlin/Configuration.h
13 years ago
linagee
c4490f5f3d
Update Marlin/Configuration.h
13 years ago
Daid
7244aa7eb7
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1
13 years ago
linagee
de2ca3b2e8
Grammar correction.
13 years ago
linagee
c2fc466e1b
Update Marlin/Configuration.h
13 years ago
linagee
9f9f498491
Update Marlin/Configuration.h
13 years ago
Guan Yang
602c8ee02b
Melzi support
13 years ago
Erik de Bruijn
e3fe1f0d00
Made a more granular configuration possible PREVENT_LENGTHY_EXTRUDE. You can now decide to allow/disallow large length of extrusions to be executed.
...
Turning off the protection might be beneficial to those who want to do fast and long reversals.
13 years ago
Erik van der Zalm
1874cb71a6
Added option to increase the FAN PWM frequency.
13 years ago
Erik van der Zalm
e3821bd86f
Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1
13 years ago
Erik van der Zalm
02af69911e
Added temperature window to M109. This is needed for systems with no overshoot PID.
13 years ago
Bernhard
464b755918
added support for the UltiController
13 years ago
Erik van der Zalm
67cf105bc6
Fixed AUTOTEMP (M109 S215 B260 F1 starts autotemp)
...
Changed SLOWDOWN. IF this does not work ok OLD_SLOWDOWN is the old algo.
13 years ago
Erik van der Zalm
63aec3c56e
Replaced Kill by Stop. If the printer is stopped. Fix the error and use M999 to restart.
...
Moved the PID_dT in the Ki and Kd calculation from the configuration.h to temperature.cpp
13 years ago
Michel Pollet
aa6e6e914e
Makefile: Redone
...
+ Removed most explicit pathnames, use the standard make "VPATH" to let
make find the files for itself.
+ Added a "hardware variant" variable that allows compiging Sanguino and
Gen7 as well as "generic" arduino.
+ Allows overriding the MOTHERBOARD define from the Makefile
+ Removed the 'preprocessor' bit that wasn't needed, now just "include" the
files that are needed, since it allows gcc to show the right file/line
when displaying error/warnings.
+ Uses gcc's own dependency generator to generate the .d files, and
and include these instead of self-patching the makefile
Signed-off-by: Michel Pollet <buserror@gmail.com>
13 years ago
Erik van der Zalm
2e749d60c3
Added DISABLE_MAX_ENDSTOPS
13 years ago
Erik van der Zalm
910f4e77a2
Added 20MHz support.
13 years ago
Erik van der Zalm
e056bf8081
Added E-Jerk
13 years ago
Phil Hord
b65ef8d66c
Add support for upcoming Gen7 v1.4
...
V1.4 moves thermistor power to the always-on 5v line.
The BOGUS_TEMPERATURE_FAILSAFE_OVERRIDE is no longer
needed on this board. Add a new motherboard type to
support this feature.
13 years ago
Erik van der Zalm
97d42ca2b2
SDSUPPORT default disabled
13 years ago
Erik van der Zalm
018c567abf
Moved SLOWDOWN function. (jetty840)
...
Included AD595 calibration options. (daid)
13 years ago
Erik van der Zalm
4fbda5c3f5
Merge remote-tracking branch 'daid/Marlin_v1' into Test
13 years ago
Erik van der Zalm
35e57bf149
Added gen6 deluxe.
13 years ago
Erik van der Zalm
84ea2d61e8
Moved gen7 boards to motherboard type 10, 11 and 12.
...
Split ramps1.3 in Sprinter like config and multiextruder config.
13 years ago
Erik van der Zalm
01d28c18ab
Fixed casting warning in sanguino
13 years ago
Blair Thompson
2fd8c248fe
Added Fan control to the pre-heat settings.
...
I find that the PID routine works better when the cooling fan is switched on
at the beginning of a warm up routine. Otherwise when you enable the fan
just before a print, you have a delay as the PIDre-adjusts.
This should also be safer as most cooling fans are directed at the hot -ends
thermal barrier!
13 years ago
Blair Thompson
d9f2f509d5
Added new menu items under the prepare submenu.
...
Instead of a single pre-heat, now there is pre-heat ABS and PLA options
Added defines to the configuration file to adjust preheat temperatures for both
13 years ago
Erik van der Zalm
ae3e7586c6
Added HOME_POS. This adds the posibility to make the center 0
...
Updated the Xsteps ... settings via the LCD menu
13 years ago
Erik van der Zalm
8816ef1c64
Small fixes after merge
13 years ago
Erik van der Zalm
d298dd121f
merged SBUBA82 and Justblair
13 years ago
Blair Thompson
a05a261b72
Added a workaround. Ramps SD card does not have sdcarddetect. My temporary solution is to add a momentary swtich
...
that pulls down the SDCARDDETECT pin and mimicking the pull and reinsert ofa a SD card
13 years ago
Blair Thompson
1b6765ed12
Updated the pin config for RAMPS 1.3 to include ultimaker new style LCD/Rotary Encoder interface
13 years ago
Christian Thalhammer
e661578c84
support for GEN7 1.1,1.2 and 1.3
13 years ago
Daid
73344e69c1
Added temperature offset/gain settings for AD595.
13 years ago
Christian Thalhammer
d309565b56
Merge remote-tracking branch 'upstream/Marlin_v1' into Marlin_v1
...
Conflicts:
Marlin/Configuration.h
13 years ago
Christian Thalhammer
0e3631ff4b
smaller changes
13 years ago
Erik van der Zalm
fa2e1be0ca
changed default EXTRUDE_MINTEMP to 170.
13 years ago
Erik van der Zalm
154de69c02
Print configuration.h version during startup (thanks hairykiwi)
13 years ago
Erik van der Zalm
9173a5713b
Teensylu support.
13 years ago
Erik van der Zalm
bdb70c0509
Warning for 10k thermistor
13 years ago
Erik van der Zalm
d8a0c6450f
Split the configuration file in two parts.
...
One for common settings.
One for advanced settings.
13 years ago
Erik van der Zalm
f9c5333f97
Made "stop heating wait" optional.
...
Default off.
13 years ago
Christian Thalhammer
13e2ad2831
- added info for using GEN7 configuration
13 years ago
Erik van der Zalm
9f139d6e0e
Added MAX6675 support. (Thanks to gregfrost)
...
Needs some work to remove the blocking in read max6675.
13 years ago
Erik van der Zalm
e45e5c68bb
Added support for Gen3+ (Pins file only)
...
Added late z enable. (blddk request)
Only calculate look ahead if >2 moves in buffer.
Removed some FORCE_INLINE to save memory.
Signed-off-by: Erik van der Zalm <erik@vdzalm.eu>
13 years ago
Bernhard
212515148e
added m240 photography support. default off
13 years ago
Bernhard
415aadf704
lcd panel bed support
...
advance and ultipanel not any more in default config
13 years ago
Erik van der Zalm
84d9cf7339
merging
13 years ago
Erik van der Zalm
e017228569
Merged multiple extruder support.
...
Soft PWM. (Sanguinololu can also have PID temperature control)
Interrupt save WRITE for addresses > 0x0FF
13 years ago
Bernhard
01001b89d2
repaired nozzle runout prevention to not collide with automatic stepper disabeling.
13 years ago
Bernhard
88ee053af0
heating up santity, formarly knows as "watchdog", but renamed due to the existance of the real watchdog, works now.
13 years ago
Bernhard
2bc5e7ec9e
prevent too long extrudes, or too cold extrudes
13 years ago
Bernhard
aa4f9a6474
better values.
13 years ago
Bernhard
87fd249c43
made runout prevention independent of tempeorarily set esteps
13 years ago
Bernhard
1ec0c3b68a
extruder runout prevention.
13 years ago
Bernhard
5b4625f79c
added a partial release option to "m84" aka "stepper release". If you do tiny layers, you might want to keep the z-axis powered to not loose height positioning after homeing.
13 years ago
Denis B
4fd75dc813
Working version of multiple extruders (up to 3)
...
- The temperature control is pretty much complete
(not sure what to do w/ autotemp though)
Changed the pins assignment to clearly separate bed and extruder heaters
and temp sensors, changed a bit how termistor tables are handled.
- The steppers control is rudimentary
(only chanages what pins it uses depending on the active_extruder var,
but that's enough for switching extruder in the start.gcode in the
the profiles)
- Tested only w/ RAMPS 1.4
13 years ago
Erik van der Zalm
b99c49ec3b
Add option to only check endstop when homing
13 years ago
Erik van der Zalm
95a0b28acb
Merge branch 'Marlin_v1', remote-tracking branch 'origin/Marlin_v1' into Marlin_v1
13 years ago
Erik van der Zalm
af22e9cd38
Some advance modifications
13 years ago
Bernhard
4f909963e4
make QUICKHOME configureable
13 years ago
Erik van der Zalm
6b86f15686
More 2nd extruder implementation. (Not usable)
...
Advance (not tested)
13 years ago
Bernhard
59205ac5fc
preliminiary implementation for the early heating finish.
...
Might be replaced by something more clever, e.g. by erik, and does not yet support the second extruder or the bed.
its kind of not so cool, because you need 6 more ints.
Maybe isheating() should use the degrees directly, as it is not used in time-critical anyways.
Then it would be much easier. to have the offsets without additional variables.
13 years ago
Erik van der Zalm
f75f426dfa
Removed interrupt nesting in the stepper ISR.
...
Add serial checkRx in stepper ISR.
Copied HardwareSerial to MarlinSerial (Needed for checkRx).
13 years ago
Erik van der Zalm
aad4b75b94
First parts 2nd extruder
13 years ago
Bernhard
a0dc66f7bf
Home retract distance configureable per axis.
13 years ago
Bernhard
6d6f323535
make an option if sd-card stop should release the steppers.
13 years ago
Bernhard
74d0032e25
cooldown blocking selectable by #define.
13 years ago
Erik van der Zalm
c0f8c9fd72
Seperate ENDSTOP_INVERTING for X Y and Z
...
Added simple endstop filter.
Corrected M114 count display.
13 years ago
Erik van der Zalm
2e43f9c809
Changed min max temperature code.
13 years ago
Bernhard Kubicek
8a1e719a3f
overworked config file
13 years ago
Bernhard Kubicek
f52e1a9571
autotemp working, default=disabled.
13 years ago
Bernhard Kubicek
70650c331d
corrected the ultimaker default values, the previous had a calculation error: see: http://groups.google.com/group/ultimaker/browse_thread/thread/91906788639703cf
13 years ago
Erik van der Zalm
b15902d3b5
Fixed bug in configuration.h
13 years ago
Erik van der Zalm
e63e224a33
Merge remote-tracking branch 'origin/Marlin_v1' into Marlin_v1
...
Conflicts:
Marlin/Configuration.h
Marlin/Marlin.pde
13 years ago
Erik van der Zalm
e7dca8614b
Advance experiments. Not working yet.
13 years ago
Bernhard Kubicek
46f80e82d9
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1
...
Conflicts:
Marlin/ultralcd.h
13 years ago
Bernhard Kubicek
a9c7da06e3
and changed ultipanel to have the mm/sec and not mm/min
...
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1
Conflicts:
Marlin/Marlin.pde
Marlin/ultralcd.h
13 years ago
Bernhard Kubicek
7919a40d06
watchdog,percent done,
13 years ago
Erik van der Zalm
805d37f77b
Fixed some small planner bugs
13 years ago
Erik van der Zalm
5fd41ae872
Some fixes in planner
13 years ago
Erik van der Zalm
95126c09c0
Added slowdown
13 years ago
Erik van der Zalm
331e82dcd3
Buffer size > 16
13 years ago
Erik van der Zalm
c00eefb824
Merge remote-tracking branch 'origin/Marlin_v1' into Marlin_v1
13 years ago
Erik van der Zalm
1d0452f10c
250000 baud
13 years ago
Bernhard Kubicek
c57906b627
fixed bug with adjusting ki in realtime.
13 years ago
Erik van der Zalm
ac82411c73
Merge remote-tracking branch 'origin/Marlin_v1' into Marlin_v1
13 years ago
Erik van der Zalm
65934eee9c
A lot of changes in the planner code
13 years ago
Bernhard Kubicek
36958ee305
minor changes and first not-well working version of autotemp
13 years ago
Bernhard Kubicek
27361e7cd0
beautified the config. ordered it into thematic sections.
13 years ago
Erik van der Zalm
d3bfffcb6e
Corrected thermistor naming
13 years ago
Bernhard Kubicek
163efdf1c7
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1
13 years ago
Bernhard Kubicek
87aaf0f70a
static'ified Marlin.pde.
13 years ago
Erik van der Zalm
76b3f805c0
Added teensylu pins
13 years ago
Bernhard Kubicek
1d171e9e52
reformating and some minor bugs/things found on the way.
13 years ago
Bernhard Kubicek
2afb7bd4cf
refactured temperature.cpp so that there are now abstract functions to access temperatures.
13 years ago
Erik van der Zalm
0b82465168
First arcs version. (Arcs not working ok)
13 years ago
Erik van der Zalm
2e8e8878e5
Corrected temp variables.
13 years ago
Erik van der Zalm
04d3b5537f
Merge remote-tracking branch 'origin/Marlin_v1' into Marlin_v1
...
Conflicts:
Marlin/Configuration.h
Marlin/EEPROMwrite.h
Marlin/Marlin.h
Marlin/Marlin.pde
Marlin/temperature.cpp
Marlin/temperature.h
Marlin/thermistortables.h
13 years ago
Erik van der Zalm
d15f01e1b4
Temperature changes
13 years ago
Bernhard Kubicek
00674af3a8
merge from the branch bkubicek/Marlin/zalmmerge
13 years ago
Erik van der Zalm
95d3d9847c
M109 now equal to sprinter
13 years ago
Erik van der Zalm
bf879ceaa9
Added thermistor tables
13 years ago
Erik van der Zalm
094afe7c10
Merged Marlin, Marlin non gen6 and Ultimaker changes
13 years ago
Erik van der Zalm
8e017b81ab
Sync with non-gen6 version
13 years ago
Erik van der Zalm
b5f6482dce
Fixed small feedrate bug.
...
Copied Camiels comments in the Configuration.h file
14 years ago
Erik van der Zalm
26bf57e22c
first-commit
14 years ago
Erik van der Zalm
750f6c33e3
first commit
14 years ago