a561bd5e3a
New feature: SDCARD_SORT_ALPHA
8 years ago
0d147ead66
Allow enabling volumetric filament on config load
8 years ago
d38e335272
From "microseconds" to "milliseconds"
...
delay() is milliseconds
8 years ago
4061fca1ad
Sanity checks for FILAMENT_CHANGE_FEATURE and FILAMENT_RUNOUT_SCRIPT
8 years ago
5ab7b91615
Comment on filament runout sensor config
8 years ago
8c6c048551
drop biv2.5 delta configurations
8 years ago
84c685f8b5
First draft of Unified Stepper / E Advance ISR
8 years ago
bec30c89e7
Merge pull request #5522 from esenapaj/Add-description-for-dual-x
...
Add description for choice of DEFAULT_DUAL_X_CARRIAGE_MODE
8 years ago
18ba31e9b5
Add Debug Menu with LCD_PROGRESS_BAR_TEST as an example
8 years ago
6854f44bf2
Add description for choice of DEFAULT_DUAL_X_CARRIAGE_MODE
8 years ago
78d6d6e076
Merge pull request #5452 from thinkyhead/rc_save_your_mesh
...
Save Bed Leveling to EEPROM
8 years ago
1b2fb2bdc7
ABL_GRID_POINTS_* => ABL_GRID_MAX_POINTS_*
8 years ago
069c6b38dd
Remove unnecessary tabs and spaces
8 years ago
06af3b62ba
Move HOLLOW_FRAME options to config_adv
8 years ago
d0e24e0876
Adaptive screen updates for all kinds of displays
...
The target here is to update the screens of graphical and char base
displays as fast as possible, without draining the planner buffer too much.
For that measure the time it takes to draw and transfer one
(partial) screen to the display. Build a max. value from that.
Because ther can be large differences, depending on how much the display
updates are interrupted, the max value is decreased by one ms/s. This way
it can shrink again.
On the other side we keep track on how much time it takes to empty the
planner buffer.
Now we draw the next (partial) display update only then, when we do not
drain the planner buffer to much. We draw only when the time in the
buffer is two times larger than a update takes, or the buffer is empty anyway.
When we have begun to draw a screen we do not wait until the next 100ms
time slot comes. We draw the next partial screen as fast as possible, but
give the system a chance to refill the buffers a bit.
When we see, during drawing a screen, the screen contend has changed,
we stop the current draw and begin to draw the new content from the top.
8 years ago
641e0936d4
Patch up Delta Calibration Menu
8 years ago
da6a094424
Sanity-check inverting and pullups for Z probe and Z endstop
...
`Z_MIN_ENDSTOP_INVERTING` must match `Z_MIN_PROBE_ENDSTOP_INVERTING`
when using `Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN`.
This is easy to overlook.
8 years ago
aa241c63b3
Include M205 note in configurations
8 years ago
d7b948610a
Experimental bilinear subdivision option
8 years ago
f882355994
Merge pull request #5318 from Sebastianv650/Account_for_LCD_improvements
...
Account for LCD improvements in ENSURE_SMOOTH_MOVES
8 years ago
20e834461d
Merge pull request #5385 from thinkyhead/rc_ftostr4sign_decimal
...
Show decimal for small numbers in ftostr4sign
8 years ago
d5bf1684fe
Implement as optional feature LCD_DECIMAL_SMALL_XY
...
And reduce the function size to simplify
8 years ago
3391c785c6
Support for distinct E factors
8 years ago
f60b4f8659
Allow case light pin to be active low
8 years ago
47b4b21308
Merge pull request #5331 from esenapaj/Fix-for-the-PR-#5072
...
Fix for the PR #5072 (Add predefined AUTO_FAN_PINs to pins files), etc
8 years ago
415294801f
Merge pull request #5330 from thinkyhead/rc_rgb_led
...
Support for an RGB LED using 3 pins
8 years ago
0909cf3d46
Adjust spacing
8 years ago
d92ce8849b
Fix for the PR #5072 (Add predefined AUTO_FAN_PINs to pins files), etc
...
・Make descriptions the same as others
8 years ago
65c50e062e
Support for an RGB LED using 3 pins
8 years ago
f674246397
extend Configurations files
8 years ago
f62f4006af
Account for LCD improvements in ENSURE_SMOOTH_MOVES
...
.. and give the hint to try lower values if possible.
8 years ago
092e949b58
Merge pull request #5169 from thinkyhead/rc_core_inverted
...
Support for COREYX, COREZX, COREZY
8 years ago
c7935bb0d2
Merge pull request #5299 from thinkyhead/rc_bed_correction_fade
...
Add a fade factor for mesh leveling
8 years ago
5460a529da
Add option DOGM_SPI_DELAY_US
8 years ago
f6f77d34a1
Add a fade factor for mesh leveling
8 years ago
ef97645002
Follow-up the PR #5255 (Case light menu (3rd attempt))
8 years ago
14b74181f5
Merge pull request #5179 from thinkyhead/rc_TMC2130
...
TMC2130 "Silent StepStick" support
8 years ago
4e4f37b6c2
Code formatting for TMC and L6470 config options
8 years ago
bf5f5f44cc
Make TMC2130 init code auto-configure
...
Simply apply enabled settings instead of requiring users to edit
stepper_indirection.cpp
8 years ago
d67c1d825f
Add TMC2130 support
8 years ago
11effeee2c
Add an option for delta to home to the top
8 years ago
072541f286
Update ENSURE_SMOOTH_MOVES in all configs
8 years ago
eb714ee873
Move dummy thermistor opts, fix redundant sensor comment
8 years ago
7a99c6ce4f
Reformat temp sensor listing
8 years ago
eb120e518c
Followup to new endstop interrupts feature
...
- Fix typos, verbiage
- Fix naming of `setup_endstop_interrupts`
- Some formatting, indentation, spacing
8 years ago
832fe284b4
Merge pull request #5184 from AnHardt/endstop_interrupts
...
Introduce endstop interrupts
8 years ago
2330619da0
Merge pull request #5191 from petrzjunior/const
...
Replace const bool with #define for consistency
8 years ago
d7ce5d271b
Replace const bool with #define for consistency
8 years ago
f3eee02596
Introduce endstop interrupts
...
If ENDSTOP_INTERRUPTS_FEATURE is enabled this tries to set up interrupt routines
for all used endstop pins. If this worked without errors, `endstops.update()` is called
only if one of the endstops changed its state.
The new interrupt routines do not really check the endstops and react upon them. All what they
do, is to set a flag if it makes sense to call the endstop test we are used to.
This can be used on:
* ARM (DUE) based boards - all pins can raise interrupts,
* RAMPS - all 6 endstop pins plus some other on EXT-2 can raise interrupts,
* RAMPS based boards - as long the designers did not change the pins for the endstops or at least left enough,
* all boards, if there are enough pins that can raise interrupts, and you are willing/able to swap with pins dedicated to other purpose.
8 years ago
60cc9342a4
Merge pull request #5188 from thinkyhead/rc_extended_host_support
...
Extended host support: M155 Auto temp report, M115 capabilities
8 years ago
3c9a838651
Extended capabilities report in M115
8 years ago
68b866b5dd
Add M155 - Auto-report temperature with interval
8 years ago
75bfde9945
M155=>M260, M156=>M261
8 years ago
2ae72b0491
Follow up the PR #5167 (Add Turkish Language) again, etc
...
・Update forgotten K8400\Dual-head\Configuration.h
・Adjust spacing
8 years ago
e3c8318504
Add reversed CORE options
8 years ago
2327764980
Add Turkish Language
8 years ago
2495ab7af2
Make dual_x_carriage_mode an enumeration
8 years ago
ab3f966f5f
Case light G-code M355
...
implemented G-Code M355 into Marlin
8 years ago
b6aa894893
Rename auto fan pins and add auto fan flags
8 years ago
627f9d5285
Merge pull request #5056 from thinkyhead/rc_lin_adv_opt
...
LIN_ADVANCE optimizations
8 years ago
0908329d96
Merge pull request #5057 from thinkyhead/rc_mbl_lcd_logical
...
Fix manual leveling coordinates
8 years ago
14e60f0d3b
Correct typo in configs
...
As pointed out by #5044
8 years ago
b9109b2875
Improve LIN_ADVANCE commentary (all configs)
8 years ago
4f6bfabaad
Patch BAUDRATE line in configs
8 years ago
b6221df3f3
Merge pull request #4983 from MarlinFirmware/revert-4933-rc_drop_pid_func_range
...
Revert "Removal of PID functional range"
8 years ago
1e551c0688
Revert "Squashed - Removal of PID functional range"
8 years ago
48761f2021
Patch delta endstop adjustment config
8 years ago
00261cbfcb
Merge pull request #4933 from thinkyhead/rc_drop_pid_func_range
...
Squashed - Removal of PID functional range
8 years ago
a0df34fd4c
Add PINS_DEBUGGING advanced config option
8 years ago
5f5d87cad3
Update Configuration.h
8 years ago
d19cfcfc1d
max_jerk array, DEFAULT_XYJERK => DEFAULT_[XY]JERK
8 years ago
473f4a17a8
Merge pull request #4914 from Rerouter/PID-Unconstrained-Itemp
...
Pid unconstrained itemp
8 years ago
0d538f3db6
Add to all configurations
8 years ago
fffc9fefa8
Apply changes to all configs
8 years ago
2d2c9bdf92
Add PROBE_Y_FIRST option for probe order
8 years ago
92c03a44a9
Fix the PR #4899 (ABL: Enable by type. Bilinear for all.) etc.
...
About Configuration.h:
・Fix the PR #4899 (ABL: Enable by type. Bilinear for all.)
Remove Duplicated contents
・Fix the PR #4305 (Custom boot screen feature improvement)
Revert from "during boot" to "during bootup" in all the example
Configuration.h
・Fix the PR #4207 (Clean up, simplify and generalize the Allen-key-probe
code.)
Resolve and relocate the duplicated definitions in Z_PROBE_ALLEN_KEY
section
・Follow-up the PR #4805 (Additional documentation of Configuration.h)
Add forgotten changes to all the example Configuration.h
Adjust spacing
About Configuration_adv.h:
Add missing description of SLOWDOWN for DELTA
Adjust spacing
8 years ago
ea0dbee3c9
Enable ABL by type, support bilinear on cartesian
8 years ago
01f1028510
Try on "CLEARANCE" for size
8 years ago
0e7d638a7a
Revert to Probe Raise rather than Probe Height
8 years ago
e05af606a8
Clean up probe config options
8 years ago
c4dcfa254e
Allow override of Z_ENDSTOP_SERVO_NR with BLTOUCH
8 years ago
e5505e3b33
Allow non-square leveling grid
8 years ago
a1812b55f6
Space out array values
8 years ago
d4599fd8ed
Comment patches to Configuration.h
8 years ago
723e983073
Default EXTRUDE_MAXLENGTH to 200mm
8 years ago
9b0931ef74
Apply fixed EXTRUDER_RUNOUT_PREVENT
8 years ago
a6f6ed352b
Fix comment on FILAMENT_RUNOUT_SENSOR
8 years ago
aaef7c6b89
Fix a misspelling of minimum
8 years ago
f1201e11c7
Improve the Jerk description
8 years ago
3f038bef00
Heading for movement settings
8 years ago
759234af60
MINIMUM_STEPPER_PULSE option
8 years ago
ab59280075
MIN_SEGMENTS_FOR_MOVE => MIN_STEPS_PER_SEGMENT
...
Follow-up to #4666
8 years ago
01d4703429
PREVENT_DANGEROUS_EXTRUDE => PREVENT_COLD_EXTRUSION
...
Also improve the documentation of this and related options, and set
EXTRUDE_MINTEMP to 170 everywhere.
8 years ago
374f8d2014
dropsegments => MIN_SEGMENTS_FOR_MOVE
8 years ago
d63b8e2b2b
Additional details for I2C_SLAVE_ADDRESS
8 years ago
a99ecf71d8
Add support for i2c slave address
8 years ago
e113740fa3
Specify that Z_PROBE_*_HEIGHT is nozzle-relative
8 years ago
7e2bd9a233
Z_RAISE_PROBE_* => Z_PROBE_*_HEIGHT
9 years ago
6eed37aafb
Merge pull request #4486 from thinkyhead/rc_pid_add_extrusion_rate_off
...
PID_EXTRUSION_SCALING, disabled by default
9 years ago
63fd1f49a6
PID_EXTRUSION_SCALING, disabled by default
9 years ago
Scott Lahteine