Scott Lahteine
f919a2fed1
Merge pull request #2134 from AnHardt/preheat-all
...
Shift call of start_watching_heater() into setTargetHotend()
10 years ago
Scott Lahteine
063881b5bd
Fix a couple of doubled semicolons
10 years ago
AnHardt
94dff5b36a
Merge pull request #2137 from thinkyhead/tweak_swh
...
Move millis call in start_watching_heater
10 years ago
Scott Lahteine
70d2f48d4e
Merge pull request #2136 from thinkyhead/M303_suppress_error
...
Suppress the line mismatch error after M303
10 years ago
AnHardt
0c0ace2a04
Remove start_watching_heater() fom M104 and M109
10 years ago
Scott Lahteine
00716d0ca0
Small start_watching_heater adjustment
10 years ago
Scott Lahteine
834747deb7
Merge pull request #2135 from Wurstnase/new_endstop_bits
...
new endstop bits
10 years ago
Scott Lahteine
bde9c70d42
Suppress the line mismatch error after M303
10 years ago
Scott Lahteine
50bd7493cc
Merge pull request #2108 from thinkyhead/m33_long_filename_host_support
...
M33 LONG_FILENAME_HOST_SUPPORT
10 years ago
Scott Lahteine
4d11b29959
Merge pull request #2113 from thinkyhead/command_sanitizer
...
Command sanitizer
10 years ago
wurstnase
ff98b8632b
new endstop bits
10 years ago
AnHardt
9b0fa9c309
Changed dependency of start_watching_heater() in setTargetHotend() to THERMAL_PROTECTION_HOTENDS
10 years ago
AnHardt
bc0764894a
Shift call of start_watching_heater() into setTargetHotend()
...
to warrant watching is set or reset.
Make setTargetBed() in _lcd_preheat() dependant of TEMP_SENSOR_BED.
Use disable_all_heaters() in lcd_cooldown() and abort_on_endstop_hit.
10 years ago
Richard Wackerbarth
b878bc5620
Introducing the Kossel Pro Build Configuration
10 years ago
Richard Wackerbarth
1d8f61ca8a
AT90USB is defined in pins.h
10 years ago
Richard Wackerbarth
735bf2d35f
Describe Custom M Code
10 years ago
Scott Lahteine
f39658c822
M120 and M121 are reversed
10 years ago
Scott Lahteine
6eb4f90ce7
Also synchronize configurator copies of configs
10 years ago
Scott Lahteine
9d1961ebe3
Witbox and Hephestos are just RAMPS_13_EFB
10 years ago
AnHardt
4422365a53
Merge branch 'Development' of https://github.com/MarlinFirmware/Marlin into _temp_error
10 years ago
AnHardt
4113762062
Merge pull request #2130 from AnHardt/kill2
...
Add a string parameter to kill()
10 years ago
AnHardt
89d2ee6f13
Make output on display dependant of ULTRA_LCD
10 years ago
AnHardt
120d4c7a8c
Merge remote-tracking branch 'origin/kill2' into _temp_error
10 years ago
AnHardt
cb6e82dc60
Change from kill() to kill(const char *)
...
in temperature.cpp
10 years ago
AnHardt
9d13942278
Use new kill() with parameter.
10 years ago
AnHardt
6398c5e28d
Merge remote-tracking branch 'origin/kill2' into _temp_error
10 years ago
AnHardt
f4a93ed997
Add a string parameter to kill()
...
Makes the output on the LCD adjustable.
10 years ago
AnHardt
2990c6c45f
Use new kill_() for _temp_error()
...
instead of stop(). We really want to require a reset and no chance to set a new temperature.
10 years ago
AnHardt
9b8c6ed254
Merge pull request #2120 from chris-bo/dogm_config
...
move dogm font selection to configuration_adv.h
10 years ago
AnHardt
06513565e9
Merge pull request #2105 from eboston/Development
...
Add ELB_FULL_GRAPHIC_CONTROLLER with ADAFRUIT_ST7565 display.
10 years ago
Ed Boston
082ed3beed
Propagate Configuration.h changes
...
Updated all the example Configuration.h files for the new display type.
10 years ago
Ed Boston
152b681bb5
Added link to controller github
...
Added the link to the github information about the
ELB_FULL_GRAPHIC_CONTROLLER
10 years ago
AnHardt
995b84944b
Merge pull request #1982 from CONSULitAS/Development_Update_language.h
...
language.h: update documentation / URL für K8200
10 years ago
Scott Lahteine
7bc5fd8193
Merge pull request #2123 from AnHardt/Duemilanove
...
Remove Duemilanove
10 years ago
Scott Lahteine
94de1e0d93
Merge pull request #2116 from AnHardt/wording
...
transpire -> expire
10 years ago
AnHardt
4d4fa3607b
Remove Duemilanove
...
No way to fit Marlin into 32K.
10 years ago
AnHardt
e353d27430
Merge branch 'Development' of https://github.com/MarlinFirmware/Marlin into Bulgarian
10 years ago
Ed Boston
ca8d1756d5
Define fixes
...
Fixed a couple defines that were not changed or commented out.
10 years ago
CONSULitAS
b96b28b7cc
language.h: update documentation for LANGUAGE_INCLUDE
...
language.h: update documentation for LANGUAGE_INCLUDE
@thinkyhead What do you think? I think there should be a warning like
this.
10 years ago
Christian Bohn
258bcdefe0
move dogm font selection to configuration_adv.h
10 years ago
AnHardt
7750180c93
transpire -> expire
...
Minor wording correction.
10 years ago
AnHardt
70163dafb9
Use _temp_error() for all errors thrown by different mechanisms
...
Now ending in an endless loop.
Tidy up the output format.
We now get:
ERRORTEXT ", system stopped! Heater_ID: " HEATERID
Where ERRORTEXT can be:
"Heating failed"
"Thermal Runaway"
"MAXTEMP triggered"
"MINTEMP triggered"
and soon
"Thermal Jump"
HEATERID can be
0, 1, 2 ,3 , "bed"
This messages are always followed by the common:
"Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)"
10 years ago
Scott Lahteine
a0f362c735
Simplify & optimize with current_command_args
10 years ago
Scott Lahteine
adc8fcb77f
More parser comments, optimize code_seen, save with goto
10 years ago
Scott Lahteine
c6d8dd19d9
use fetched value
10 years ago
Scott Lahteine
1116e13f5a
Further optimization of command parser
10 years ago
Scott Lahteine
3a4c3ab76e
Pre-sanitize the command before handling
...
- Use a global pointer for the current sanitized command
- Pre-sanitize the current command to bypass `N` and nullify `*`,
removing the need for handlers to bypass, ignore, or nullify these
parts, and reducing overhead for `code_seen`, etc.
- Pre-skip leading whitespace.
- Only look for G, M, T codes at the start of the command.
- Verify that G, M, T codes are followed by command codes.
10 years ago
Ed Boston
a83bf18ee1
More functional seperation
...
Moved SDCARDDETECTINVERTED and SDSLOW to Conditionals.h.
Added U8GLIB_LM6059_AF to define display specific actions.
Added reminder to compile in u8glib
10 years ago
AnHardt
97ca1b3f4d
Name magic value 20 to MAX_OVERSHOOT_PID_AUTOTUNE
...
to make it better findable.
10 years ago
Scott Lahteine
0f2c9bacfd
M33 LONG_FILENAME_HOST_SUPPORT
10 years ago
Scott Lahteine
3feaef6526
Have G92 set the nozzle position on Delta and SCARA
10 years ago
Ed Boston
047e688e93
Changed ADAFRUIT_ST7565 to ELB_FULL_GRAPHIC_CONTROLLER
...
Rename of define to avoid confusion between the controller and the
display which had similar names.
10 years ago
Ed Boston
1999ac415c
Formatting Changes
...
Fixes for some code formatting changes and commenting out the
ADAFRUIT_ST7565 define that was left defined.
10 years ago
Ed Boston
41f8cdb3a6
ADAFRUIT_ST7565
...
Added support for new display type
10 years ago
wurstnase
21ff773832
rework out_bits
10 years ago
Scott Lahteine
6c27eaf864
Merge pull request #2101 from thinkyhead/code_style
...
Code style and a dangling "else"
10 years ago
Scott Lahteine
d580a0d186
Use "+=" in plane rotation
10 years ago
Scott Lahteine
2f3a410cb0
Fix a potential hanging "else" bug
10 years ago
Scott Lahteine
b83e3f0905
Combine "Bed X: " strings
10 years ago
Scott Lahteine
7dfb8becdb
Adjust some names and types in Marlin_main.cpp
10 years ago
Scott Lahteine
c966aa26ff
Comments in Marlin_main.cpp
10 years ago
Scott Lahteine
c54a2ea042
Adjust spacing in Marlin_main.cpp and stepper.*
10 years ago
Scott Lahteine
072625ccad
Update headings in Marlin_main.cpp and stepper.cpp
10 years ago
Scott Lahteine
16032f149f
Rename to codenum as a consistency
10 years ago
Scott Lahteine
273a4a253f
Merge pull request #2096 from thinkyhead/cherry_picking3
...
Hide M117 with no LCD
10 years ago
Scott Lahteine
64825a3d1e
Merge pull request #2095 from thinkyhead/cherry_picking2
...
Add gcode_line_error to reduce code size
10 years ago
Scott Lahteine
ca79282eaf
Hide M117 with no LCD
10 years ago
Scott Lahteine
ce218cafdb
Add gcode_line_error to reduce code size
10 years ago
Scott Lahteine
46d59784ad
Rename preocess_command to process_next_command
10 years ago
Scott Lahteine
513077c317
Minor change to fan kick
10 years ago
Scott Lahteine
76438195f0
NO_TIMEOUTS and ADVANCED_OK off by default
10 years ago
Scott Lahteine
d2563804c8
Add LF to file errors
10 years ago
Scott Lahteine
e114662cfa
Adjust SdBaseFile spacing
10 years ago
Scott Lahteine
98e91f5253
Allow lsDive to recurse with minimal stack usage
10 years ago
Scott Lahteine
19166a92e4
Merge pull request #2057 from Wurstnase/serial_wait
...
add plan buffer remaining for 'P' and block buffer remaining 'B'
10 years ago
Scott Lahteine
95f5a68006
Merge pull request #2074 from thinkyhead/lcd_xyz_unknown
...
Display unknown XYZ on the LCD as "---"
10 years ago
Scott Lahteine
e97fcafd0e
Merge pull request #2076 from thinkyhead/mendel_inverting
...
Use MSG_OK in M105
10 years ago
Scott Lahteine
0f6cd3640b
Drop extraneous ok_to_send
10 years ago
Scott Lahteine
0ce355d9e7
Use MSG_OK in M105
10 years ago
Scott Lahteine
a366e57385
Merge pull request #2075 from thinkyhead/mendel_inverting
...
Use Mendel default for INVERT_Y_DIR
10 years ago
Scott Lahteine
7b3acfbb6f
Merge pull request #2072 from thinkyhead/better_arc_code
...
Consolidate arc code, remove motion_control.*
10 years ago
Scott Lahteine
78beef2d73
Use Mendel default for INVERT_Y_DIR
10 years ago
Scott Lahteine
1a4a09c26f
Display unknown XYZ on the LCD as "---"
...
- Also show 2 digits past decimal for Z on DOGM
10 years ago
Scott Lahteine
68ce419147
Note on segment size
10 years ago
Scott Lahteine
8b92249f18
Bring arc_offset into auto scope
10 years ago
Scott Lahteine
80807b2d71
Consolidate arc code, remove motion_control.*
10 years ago
Scott Lahteine
f65833931d
Formatting tweaks
10 years ago
Scott Lahteine
fcfd99c1ae
Add comments to lcd_control_temperature_menu
10 years ago
Scott Lahteine
d693e0f378
Use WATCH_TEMP_INCREASE + TEMP_HYSTERESIS + 1 as difference limit
10 years ago
Scott Lahteine
6697a8f375
Watch the heater a little longer
10 years ago
Scott Lahteine
5693a6e3c9
Fix heating error message
10 years ago
Scott Lahteine
747fd5801c
Merge pull request #2055 from thinkyhead/thermal_unified
...
Combine thermal runaway and watch-period
10 years ago
Scott Lahteine
6e5572228d
Merge pull request #2064 from thinkyhead/wait_before_g28
...
Split up prepare_move by type
10 years ago
Scott Lahteine
27ad381e25
Allow fractional seconds in G4 and M0
10 years ago
Scott Lahteine
5146694452
Merge pull request #1884 from shaggythesheep/feature_new_board_ramps_cnc_controller
...
Feature: Add RAMPS CNC Controller Board
10 years ago
Scott Lahteine
b2bd9aae7c
SCARA_SEGMENTS_PER_SECOND
10 years ago
Scott Lahteine
bd20bd5444
Merge pull request #2063 from chris-bo/autobed_sled
...
improve sled handling
10 years ago
Scott Lahteine
9e95ceb3fc
Split up prepare_move by type
...
- For better encapsulation add inlines for each prepare_move type
- Move controllerFan vars inside the function as statics
- Some formatting cleanup
- Rename `ClearToSend` as `ok_to_send`
10 years ago
Scott Lahteine
9ba8cf5fe3
Merge pull request #2061 from thinkyhead/wait_before_g28
...
Always do st_synchronize() before G28
10 years ago
Scott Lahteine
873f7d6f2a
Check that configs are up-to-date
10 years ago
Christian Bohn
f48599f172
add pin definition to some motherboards
10 years ago
Scott Lahteine
b5200e184c
Remove extra setup_for_endstop_move
10 years ago
Scott Lahteine
8d814de558
Return void in prevent_dangerous_extrude
10 years ago
Scott Lahteine
367e2eb9f4
Global setup_for_endstop_move
10 years ago
Wurstnase
1d5677cc3b
add missing Z-bits
10 years ago
Wurstnase
df12e68e7d
add missing Z_PROBE-bit
10 years ago
Scott Lahteine
fa951f8a0b
Always do st_synchronize() before G28
10 years ago
Christian Bohn
27a3b1d895
disable sled pin by default
10 years ago
Christian Bohn
fb44b53ae3
sled improvements
...
- create sled pin definition
- G28 Works with sled
10 years ago
Wurstnase
46d1932380
add plan buffer remaining for 'P' and block buffer remaining 'B'
10 years ago
Scott Lahteine
429c6ccad2
Neaten config formatting
10 years ago
Scott Lahteine
8a0dc4d54a
Merge pull request #1922 from Wurstnase/serial_wait
...
Serial wait
10 years ago
Scott Lahteine
8332a15899
Fix testing of runaway options in temperature.cpp
10 years ago
Wurstnase
526ad82d20
activate advanced_ok and no_timeout
10 years ago
Scott Lahteine
2b92b01afc
Fix typo in SanityCheck.h
10 years ago
Scott Lahteine
2445ae3d3a
Combine thermal runaway and watch-period
...
- Make thermal protection for all hotends and/or bed into simple
switches
- Now enable `WATCH_TEMP_PERIOD` when `THERMAL_PROTECTION_HOTENDS` is
enabled
- Move detailed thermal parameters to `Configuration_adv.h`
- Add sanity checks to warn about old configurations
- Change `WATCH_TEMP_PERIOD` to seconds instead of milliseconds
10 years ago
Scott Lahteine
4097207c75
Merge pull request #2041 from thinkyhead/watch_temp
...
More thermal protection
10 years ago
Scott Lahteine
45d64040fe
Merge pull request #2048 from Wurstnase/hit_bits
...
replace some bools
10 years ago
Scott Lahteine
9b3d4380d3
Only watch the heater that was set
10 years ago
Scott Lahteine
52c0696e44
Merge pull request #2044 from thinkyhead/fix_servos_too
...
Make some z probe and servo code tweaks
10 years ago
Wurstnase
b55f32f8a1
replace some bools
...
this PR replaces some bools with one char. this will safe 3 bytes and should also be sometimes a little bit faster.
10 years ago
Laurent DELAGE
e70e6e2b48
Correction traductions
10 years ago
Scott Lahteine
f73f4ce555
Make some z probe and servo code tweaks
10 years ago
Scott Lahteine
28c87ec81b
Disable all heaters on temp error
10 years ago
Scott Lahteine
79106638a8
Fix documentation of heating sanity check
10 years ago
Scott Lahteine
6110494a56
Change default to 4°C in 16s
10 years ago
Scott Lahteine
54deb9eea3
Enable WATCH_TEMP_PERIOD by default
10 years ago
Scott Lahteine
deedb00c18
Document WATCH_TEMP_PERIOD
10 years ago
Scott Lahteine
be77cfd895
Merge pull request #2032 from Wurstnase/toshiba_for_all_stepper
...
We don't need the old standard one. The STEP_ADD and STEP_IF_COUNTER …
10 years ago
Scott Lahteine
cb4ea75fab
Support for MKS BASE 1.0 board
10 years ago
Scott Lahteine
0e70511381
Merge pull request #2036 from brupje/mainline
...
Fixes for reprapworld's keypad
10 years ago
Wurstnase
0cb87795a3
advanced 'ok'
...
ok N(linenumber) P(bufferremaining)
the host can use this to send the data much faster.
Some pseudo code:
If (bufferremaining > 0) send command
## as long there is free buffer send command
Also
if (linenumber > lastsend - bufferremaining) send command
## as long last linenumber received is bigger than lastsend (host) - last bufferremaining received
10 years ago
Wurstnase
182e0d99c9
Merge remote-tracking branch 'Marlin8bit/Development' into serial_wait
10 years ago
brupje
d1148a0198
Rename Configuration_megatronics.h to Configuration.h
10 years ago
Scott Lahteine
7f3252eea9
Merge pull request #1999 from paclema/Filrunout_configurable_script
...
Added configurable script for filrunout from configuration.h
10 years ago
Scott Lahteine
181ccc884c
Edit thermal runaway description
10 years ago
Wurstnase
073e4af7e2
We don't need the old standard one. The STEP_ADD and STEP_IF_COUNTER are also good for non-Toshiba stepper driver.
10 years ago
brupje
b7fcb11580
Added example configuration for Megatronics
10 years ago
brupje
8f8174dc93
Revert "Default configuration for megatronics."
...
This reverts commit 22e0d2afcb
.
10 years ago
Scott Lahteine
79633a74ab
Fix MBL compile error
10 years ago
brupje
ba9741139e
Clean up pins file for megatronics
10 years ago
brupje
22e0d2afcb
Default configuration for megatronics.
10 years ago
brupje
816aa19861
Up/down buttons were reversed, swapped the assignments
10 years ago
brupje
df4d50579a
This is conflicting with the settings in ultralcd.h. Not sure why it' s redefined here anyway.
10 years ago
brupje
8f8bf3a897
Make Marlin actually compile when #define REPRAPWORLD_KEYPAD is uncommented
10 years ago
Scott Lahteine
777f2d3820
Merge pull request #2018 from fmalpartida/bugFixing
...
Bug corrected: persistent HOMING message when HOME button pressed for homing.
10 years ago
Scott Lahteine
ecb46de349
Merge pull request #2013 from bq/Fix_lowercase
...
Fixed lowercase change missing on commit a22a228b
.
10 years ago
fmalpartida
150a35eff8
Bug corrected:
...
Persistent homing message.
Message was declared as an alert, therefore it was persistent.
Updated to message.
10 years ago
Gina Häußge
ab246ab032
Reverting changes to error messages on serial console
...
This reverts the changes done to the error message for line number mismatches done in commit d43cc2dd5f
10 years ago
Ivan Galvez Junquera
59529b755d
Fixed lowercase change missing on commit a22a228b
.
...
Servo.cpp and Servo.h were changed to lowercase in Makefile but not their actual filenames.
10 years ago
Scott Lahteine
df4c104637
Merge pull request #2012 from BrianGilbert/Development
...
Add example configuration for Boots Industries V2.5 Delta Printer
10 years ago
Scott Lahteine
1f039cde61
Merge pull request #1992 from thinkyhead/too_many_probes
...
Stow Z probe on M402 without extra raise
10 years ago
Brian Gilbert
1285784a49
Add Boots Industries V2.5 example configuration
10 years ago
Scott Lahteine
35493e1af9
Tweak to planner.cpp position.debug
10 years ago
paclema
26015b02d8
Fixed typo and updated Configuration.h of configurator
10 years ago
paclema
aedd580911
Updated all configuration.h examples
10 years ago
Scott Lahteine
2c892fca6a
Cleanup of language.h
10 years ago
Scott Lahteine
2db384a21d
Fix compile error in configuration_store.cpp
10 years ago
Scott Lahteine
ca8cec8e8a
Merge pull request #1998 from paclema/Filament_runout_fix
...
Fixed sintaxis error of filament runout
10 years ago
Scott Lahteine
425cd46c12
Merge pull request #1993 from AnHardt/TRP-bed
...
Enable TRP for the bed
10 years ago
Scott Lahteine
d4c74b8f8c
Don't apply M428 if an error occurs
...
- Also move audio feedback into the command
- Added shorthand for `lcd_buzz` availability
10 years ago
Scott Lahteine
d065d37822
Add M428 to set home_offset logically
10 years ago
paclema
013a09dbe6
Added configurable script for filrunout form configuration.h
10 years ago
paclema
4dcc0fd55a
Fixed sintaxis error of filament runout
10 years ago
AnHardt
514d8ac460
Enable TRP for the bed
...
in all Configurations.
10 years ago
Scott Lahteine
ce3caf447b
Tweak how homeaxis deploys and stows
10 years ago
Scott Lahteine
a235dca79c
Stow z on M402 without extra raise
10 years ago
Scott Lahteine
2610b8d047
Enable thermal runaway protection by default
10 years ago
AnHardt
b4b19a6cbd
Merge https://github.com/MarlinFirmware/Marlin into Bulgarian
...
Conflicts:
Marlin/Configuration.h
Marlin/configurator/config/Configuration.h
Marlin/example_configurations/Felix/Configuration.h
Marlin/example_configurations/Felix/Configuration_DUAL.h
Marlin/example_configurations/Hephestos/Configuration.h
Marlin/example_configurations/K8200/Configuration.h
Marlin/example_configurations/SCARA/Configuration.h
Marlin/example_configurations/WITBOX/Configuration.h
Marlin/example_configurations/delta/generic/Configuration.h
Marlin/example_configurations/delta/kossel_mini/Configuration.h
Marlin/example_configurations/makibox/Configuration.h
Marlin/example_configurations/tvrrug/Round2/Configuration.h
Conflicts with my Chinese implementation resolved.
10 years ago
Scott Lahteine
7548a56f64
Merge pull request #1886 from ex-nerd/pins_BRAINWAVE_PRO
...
Add pin configuration for Brainwave Pro
10 years ago
Scott Lahteine
02acf0641a
Merge pull request #1983 from CONSULitAS/Development_Update_language_de.h
...
language_de.h: updated translation and minor typos
10 years ago
Scott Lahteine
a120bf3fe4
Latest upstream commits
10 years ago
Scott Lahteine
3688256f86
Merge pull request #1974 from thinkyhead/eeprom_in_gcode
...
Make EEPROM reproducible in GCode
10 years ago
Scott Lahteine
ae53b3cdc3
Fix the M303 S-1 report text
10 years ago
Scott Lahteine
c1fbef1722
Merge pull request #1988 from thinkyhead/bye_string_url
...
Remove obsolete STRING_URL
10 years ago
Scott Lahteine
31516e2a3b
Merge pull request #1985 from Arengorn/Development
...
Update of servo.h
10 years ago
Scott Lahteine
185f8a0a66
Merge pull request #1917 from CONSULitAS/Development_Update_K8200_Config
...
Example Configuration for K8200: comments/URL/readme
10 years ago
Scott Lahteine
0970102950
Remove obsolete STRING_URL
10 years ago
Scott Lahteine
0f687b5dda
Merge branch 'Development' into eeprom_in_gcode
...
Latest upstream commits
10 years ago
Scott Lahteine
28aef684b4
Merge pull request #1957 from Voxel8/sjk/home_y_before_x
...
Allow Y to home before X with option in Configuration_adv.h.
10 years ago
Scott Lahteine
c1dd9bda7f
Merge pull request #1987 from thinkyhead/fix_homing_zpos
...
Disable endstops between homing bumps
10 years ago
Scott Lahteine
71a0b1a5bb
Disable endstops between homing bumps
10 years ago
Scott Lahteine
8c28e36e75
Merge pull request #1986 from thinkyhead/fix_homing_zpos
...
Fix homing Z position
10 years ago
Scott Lahteine
c36226c4dc
Fix homing Z position
...
Add `sync_plan_position()` after `axis_is_at_home(axis)` to keep the
planner position in sync when homing.
10 years ago
Scott Lahteine
2bc1d70a31
Merge pull request #1977 from AnHardt/Cinese2
...
We mark this historic day, when Marlin went to China.
10 years ago
Scott Lahteine
ff178d8cf7
Change M421 to take coordinates
...
This makes `M421` more amenable for irregular matrices
10 years ago
Bernardo
e449659338
Update Servo.cpp
...
Updated "servo.h" to "Servo.h"
10 years ago
Bernardo
ff67ee73fc
Update Marlin_main.cpp
...
Corrected "servo.h" to "Servo.h" because of the updated filename.
10 years ago
Scott Lahteine
5b248757c7
Level Bed in Prepare submenu
...
- Add “Level Bed” menu item for auto bed leveling
- Hide the option if homing has not been done yet
- Arrange the Prepare submenu more logically (?)
- Add documentation comments, some white-space
- Apply some coding standards here and there
- Move old encoder multiplier debug option to `ultralcd.cpp`
10 years ago
CONSULitAS
c5dfb35597
language_de.h: updated translation and minor typos
...
language_de.h: updated translation and minor typos
10 years ago
CONSULitAS
6423fe7601
language.h: update documentation / URL für K8200
...
language.h: update documentation for LANGUAGE_INCLUDE
language.h: URL für K8200 github repository
10 years ago
CONSULitAS
6af40e9dc0
K8200 example Configuration.h: STRING_URL removed
...
K8200 example Configuration.h:
* STRING_URL removed: like proposed by thinkyhead in #1917
10 years ago
CONSULitAS
d1c1f766d5
Merge remote-tracking branch 'upstream/Development' into K8200_2015-04-23_TEST
...
Conflicts:
Marlin/example_configurations/K8200/Configuration.h
10 years ago
Steve Kelly
98ca46006c
Allow Y to home before X with option in Configuration_adv.h.
...
This addresses comments in #1956 and #1079 . In particular, this is useful
when both endstops are stationary on a CoreXY system, and the Y axis needs
to be homed before the X so the flags are aligned.
10 years ago
AnHardt
6cba6bcd82
Add 'cn' to the other 'Configuration.h's
10 years ago
AnHardt
1d9699be0f
Add some doku
10 years ago
AnHardt
76b12edecf
Give TALL_FONT_CORRECTION a default
10 years ago
AnHardt
6b1b71837c
Intit. commit for Chinese
...
Edited the European part of 'ISO10646_CN.fon' to match the existing fonts.
Added Chinese font to make_fonts.bat
Created 'dogm_font_data_ISO10646_CN.h'
Added Chinese to 'language.h'
Added 'language_cn.h' with some minor edits.
Added Chinese font in 'language_en.h' to not fall back to European font.
Added cn to 'Configuration.h'
Changed WIDTH to LCD_PIXEL_WIDTH and HEIGHT to LCD_PIXEL_HEIGHT to have more descriptive names.
In 'dogm_lcd_implementation.h'
Added Chinese Font
Made 1 pixel more room for the larger Chinese font on the status line.
Changed geometry of the 'select bar' by one pixel.
Changed the way the position for values and postcars are set.
10 years ago
Scott Lahteine
fb379384ee
Reduce MBL eeprom read code
10 years ago
Scott Lahteine
0fca084ea6
Make EEPROM reproducible in GCode
...
With these changes the output of `M503 S0` is all you need to restore
the EEPROM. Building on this it is straightforward to save and restore
the EEPROM state using the SD card or external GCode file.
- Added `M145` to set “heatup states” for the LCD menu
- Added `M420` to toggle Mesh Bed Leveling
- Added `M421` to set a single Mesh coordinate
- Extended `Config_PrintSettings` with added M codes
- Cleaned up some comments here and there
10 years ago