Scott Lahteine
9ebcae496d
RIGIDBOARD / RIGIDPANEL
10 years ago
Scott Lahteine
c3c605c658
Move note about LiquidTWI2 to Configuration.h (PR#2406)
10 years ago
Scott Lahteine
dc40a5f6e0
Patch up more outdated config lines
10 years ago
Scott Lahteine
98c9111a7d
Update delta configs with latest settings
10 years ago
Scott Lahteine
e6baf8afd9
Fix up allen key settings in delta configs
10 years ago
Scott Lahteine
3b293fc5d1
Move Delta settings lower in delta files
10 years ago
Scott Lahteine
df21857583
Move extruder offset settings next to extruders setting
10 years ago
Scott Lahteine
2dd1859247
Cleanup spaces and comments in configs and conditionals
10 years ago
Scott Lahteine
a274769f4f
Clean up spacing and comments
...
Also clean up some trailing spaces in a few other sources
10 years ago
Scott Lahteine
d3bce05d54
Fix up spacing for filament sensor values
10 years ago
Scott Lahteine
b4b10a57fe
Fix configurator section directives and values lists
10 years ago
Scott Lahteine
bba14dcbe6
Move Z Safe Homing point to the middle of the movement range
10 years ago
wurstnase
c85a486445
make the dual z-endstop optional (PR#2277)
...
it's disabled by default
10 years ago
Richard Wackerbarth
58941e543e
ELB_FULL_GRAPHIC_CONTROLLER_SDCARDDETECTINVERTED removed
...
#defining something just to define something else doesn’t
make sense
If you want SDCARDDETECTINVERTED, just define it yourself.
If the previous code was intended to define, undefined and then again define the term, that code is improper.
10 years ago
CONSULitAS
3a5963c0e7
Configuration_adv.h: Add FAN_MIN_PWM for slow fan stopping issue …
...
* all Configuration_adv.h: Add #define FAN_MIN_PWM for slow fan stopping
issue
* for K8200: uncommented with tested (and working) values
10 years ago
Richard Wackerbarth
303d47228e
Define Probe Path in new format
10 years ago
Ed Boston
08968c29bb
Adding ELB_FULL_GRAPHIC_CONTROLLER_SDCARDDETECTINVERTED to Examples
10 years ago
AnHardt
d1f4471000
Merge pull request #2146 from Wackerbarth/Versioning
...
Versioning
10 years ago
Jonathan Bastien-Filiatrault
d46d9d998e
Add maximum bed integral term in example configurations.
10 years ago
Richard Wackerbarth
b5743d6927
Use SOURCE_CODE_URL rather than FIRMWARE_URL
10 years ago
Richard Wackerbarth
5ea139fd79
Revised Versioning mechanism
10 years ago
Scott Lahteine
38cc0b93c6
Merge pull request #1874 from AnHardt/Bulgarian
...
Introduction of Bulgarian - language_bg.h
10 years ago
Scott Lahteine
04a1622172
Merge pull request #2127 from Wackerbarth/Kossel_Pro
...
Kossel Pro
10 years ago
Scott Lahteine
81c2ca3e10
Merge pull request #2131 from thinkyhead/bq_is_ramps_13_efb
...
Witbox and Hephestos are RAMPS EFB
10 years ago
Scott Lahteine
50bd7493cc
Merge pull request #2108 from thinkyhead/m33_long_filename_host_support
...
M33 LONG_FILENAME_HOST_SUPPORT
10 years ago
Richard Wackerbarth
b878bc5620
Introducing the Kossel Pro Build Configuration
10 years ago
Scott Lahteine
9d1961ebe3
Witbox and Hephestos are just RAMPS_13_EFB
10 years ago
AnHardt
9b8c6ed254
Merge pull request #2120 from chris-bo/dogm_config
...
move dogm font selection to configuration_adv.h
10 years ago
AnHardt
06513565e9
Merge pull request #2105 from eboston/Development
...
Add ELB_FULL_GRAPHIC_CONTROLLER with ADAFRUIT_ST7565 display.
10 years ago
Ed Boston
082ed3beed
Propagate Configuration.h changes
...
Updated all the example Configuration.h files for the new display type.
10 years ago
AnHardt
e353d27430
Merge branch 'Development' of https://github.com/MarlinFirmware/Marlin into Bulgarian
10 years ago
Christian Bohn
258bcdefe0
move dogm font selection to configuration_adv.h
10 years ago
AnHardt
7750180c93
transpire -> expire
...
Minor wording correction.
10 years ago
Scott Lahteine
0f2c9bacfd
M33 LONG_FILENAME_HOST_SUPPORT
10 years ago
Scott Lahteine
76438195f0
NO_TIMEOUTS and ADVANCED_OK off by default
10 years ago
Scott Lahteine
78beef2d73
Use Mendel default for INVERT_Y_DIR
10 years ago
Scott Lahteine
d693e0f378
Use WATCH_TEMP_INCREASE + TEMP_HYSTERESIS + 1 as difference limit
10 years ago
Scott Lahteine
747fd5801c
Merge pull request #2055 from thinkyhead/thermal_unified
...
Combine thermal runaway and watch-period
10 years ago
Scott Lahteine
b2bd9aae7c
SCARA_SEGMENTS_PER_SECOND
10 years ago
Scott Lahteine
429c6ccad2
Neaten config formatting
10 years ago
Scott Lahteine
8a0dc4d54a
Merge pull request #1922 from Wurstnase/serial_wait
...
Serial wait
10 years ago
Wurstnase
526ad82d20
activate advanced_ok and no_timeout
10 years ago
Scott Lahteine
2445ae3d3a
Combine thermal runaway and watch-period
...
- Make thermal protection for all hotends and/or bed into simple
switches
- Now enable `WATCH_TEMP_PERIOD` when `THERMAL_PROTECTION_HOTENDS` is
enabled
- Move detailed thermal parameters to `Configuration_adv.h`
- Add sanity checks to warn about old configurations
- Change `WATCH_TEMP_PERIOD` to seconds instead of milliseconds
10 years ago
Scott Lahteine
79106638a8
Fix documentation of heating sanity check
10 years ago
Scott Lahteine
6110494a56
Change default to 4°C in 16s
10 years ago
Scott Lahteine
54deb9eea3
Enable WATCH_TEMP_PERIOD by default
10 years ago
Scott Lahteine
deedb00c18
Document WATCH_TEMP_PERIOD
10 years ago
Scott Lahteine
0e70511381
Merge pull request #2036 from brupje/mainline
...
Fixes for reprapworld's keypad
10 years ago
brupje
d1148a0198
Rename Configuration_megatronics.h to Configuration.h
10 years ago
Scott Lahteine
7f3252eea9
Merge pull request #1999 from paclema/Filrunout_configurable_script
...
Added configurable script for filrunout from configuration.h
10 years ago
Scott Lahteine
181ccc884c
Edit thermal runaway description
10 years ago
brupje
b7fcb11580
Added example configuration for Megatronics
10 years ago
Brian Gilbert
1285784a49
Add Boots Industries V2.5 example configuration
10 years ago
paclema
aedd580911
Updated all configuration.h examples
10 years ago
Scott Lahteine
425cd46c12
Merge pull request #1993 from AnHardt/TRP-bed
...
Enable TRP for the bed
10 years ago
AnHardt
514d8ac460
Enable TRP for the bed
...
in all Configurations.
10 years ago
Scott Lahteine
2610b8d047
Enable thermal runaway protection by default
10 years ago
AnHardt
b4b19a6cbd
Merge https://github.com/MarlinFirmware/Marlin into Bulgarian
...
Conflicts:
Marlin/Configuration.h
Marlin/configurator/config/Configuration.h
Marlin/example_configurations/Felix/Configuration.h
Marlin/example_configurations/Felix/Configuration_DUAL.h
Marlin/example_configurations/Hephestos/Configuration.h
Marlin/example_configurations/K8200/Configuration.h
Marlin/example_configurations/SCARA/Configuration.h
Marlin/example_configurations/WITBOX/Configuration.h
Marlin/example_configurations/delta/generic/Configuration.h
Marlin/example_configurations/delta/kossel_mini/Configuration.h
Marlin/example_configurations/makibox/Configuration.h
Marlin/example_configurations/tvrrug/Round2/Configuration.h
Conflicts with my Chinese implementation resolved.
10 years ago
Scott Lahteine
3688256f86
Merge pull request #1974 from thinkyhead/eeprom_in_gcode
...
Make EEPROM reproducible in GCode
10 years ago
Scott Lahteine
c1fbef1722
Merge pull request #1988 from thinkyhead/bye_string_url
...
Remove obsolete STRING_URL
10 years ago
Scott Lahteine
185f8a0a66
Merge pull request #1917 from CONSULitAS/Development_Update_K8200_Config
...
Example Configuration for K8200: comments/URL/readme
10 years ago
Scott Lahteine
0970102950
Remove obsolete STRING_URL
10 years ago
Scott Lahteine
0f687b5dda
Merge branch 'Development' into eeprom_in_gcode
...
Latest upstream commits
10 years ago
Scott Lahteine
28aef684b4
Merge pull request #1957 from Voxel8/sjk/home_y_before_x
...
Allow Y to home before X with option in Configuration_adv.h.
10 years ago
Scott Lahteine
2bc1d70a31
Merge pull request #1977 from AnHardt/Cinese2
...
We mark this historic day, when Marlin went to China.
10 years ago
Scott Lahteine
5b248757c7
Level Bed in Prepare submenu
...
- Add “Level Bed” menu item for auto bed leveling
- Hide the option if homing has not been done yet
- Arrange the Prepare submenu more logically (?)
- Add documentation comments, some white-space
- Apply some coding standards here and there
- Move old encoder multiplier debug option to `ultralcd.cpp`
10 years ago
CONSULitAS
6af40e9dc0
K8200 example Configuration.h: STRING_URL removed
...
K8200 example Configuration.h:
* STRING_URL removed: like proposed by thinkyhead in #1917
10 years ago
CONSULitAS
d1c1f766d5
Merge remote-tracking branch 'upstream/Development' into K8200_2015-04-23_TEST
...
Conflicts:
Marlin/example_configurations/K8200/Configuration.h
10 years ago
Steve Kelly
98ca46006c
Allow Y to home before X with option in Configuration_adv.h.
...
This addresses comments in #1956 and #1079 . In particular, this is useful
when both endstops are stationary on a CoreXY system, and the Y axis needs
to be homed before the X so the flags are aligned.
10 years ago
AnHardt
6cba6bcd82
Add 'cn' to the other 'Configuration.h's
10 years ago
Scott Lahteine
0fca084ea6
Make EEPROM reproducible in GCode
...
With these changes the output of `M503 S0` is all you need to restore
the EEPROM. Building on this it is straightforward to save and restore
the EEPROM state using the SD card or external GCode file.
- Added `M145` to set “heatup states” for the LCD menu
- Added `M420` to toggle Mesh Bed Leveling
- Added `M421` to set a single Mesh coordinate
- Extended `Config_PrintSettings` with added M codes
- Cleaned up some comments here and there
10 years ago
Scott Lahteine
5c29fda167
Add a warning for DISABLE_[XYZ] options
10 years ago
Scott Lahteine
3b97a7d446
Merge pull request #1944 from AnHardt/beep2
...
More Beeper clean up
10 years ago
AnHardt
064f2b37d0
More Beeper clean up.
...
Centralised beep code to lcd_buzz().
From gcode_M300() and lcd_quick_feedback().
Enforced max. duration for M300 to 5 seconds.
Corrected description in 'Configuration.h'
LCD_FEEDBACK_FREQUENCY_HZ 0 gives now a silent delay of
LCD_FEEDBACK_FREQUENCY_DURATION_MS.
10 years ago
Ivan Galvez Junquera
b99e63a7bf
Fixed compilation error "error: stray ‘\357’ in program" in several configuration files.
...
Introduced in commit 697ee2dc
and later spread to other files.
10 years ago
CONSULitAS
1de9b568db
Example Configuration for K8200: comments/URL/readme
...
Example Configuration for K8200 : comments/URL/readme
example_configurations\K8200\Configuration.h:
* add machine specific header
* change STRING_URL to K8200 fork (@thinkyhead: What do you think?)
example_configurations\K8200\readme.md:
* updated documentation
* added URLs and links
10 years ago
CONSULitAS
0af5e3a04f
Example Configuration for K8200: comments/URL/readme
...
Example Configuration for K8200 : comments/URL/readme
example_configurations\K8200\Configuration.h:
* add machine specific header
* change STRING_URL to K8200 fork (@thinkyhead: What do you think?)
example_configurations\K8200\readme.md:
* updated documentation
* added URLs and links
10 years ago
CONSULitAS
3851ac6226
Example Configuration for K8200 back in sync
...
example_configurations\K8200\Configuration.h:
* merge upstream changes from default Configuration.h manually
* add some machine specific comments
10 years ago
CONSULitAS
b447a4ffab
Merge remote-tracking branch 'upstream/Development' into Development
10 years ago
Scott Lahteine
ccddc280be
Apply three more commits
10 years ago
Scott Lahteine
74e4b42f7e
Default MACHINE_NAME to "3D Printer"
10 years ago
Scott Lahteine
c6bb98abad
machine name for hephestos too
10 years ago
Scott Lahteine
ccbe2c4ea3
Apply CUSTOM_MACHINE_NAME to configurations
...
- Replace “Mendel” with “RepRap”
10 years ago
AnHardt
56fc3a4835
bgr -> bg
...
+ update in documentation
10 years ago
Natealus
585eee6549
Z Probe inverting not present in example configs, causes error
...
The line const bool Z_PROBE_ENDSTOP_INVERTING = false; // set to true to
invert the logic of the endstop is in the main configuration.h but
wasn't present in the example configuration.h's. Causes a compiling
error with Z Probe enabled. Just added it to all the configs. :)
10 years ago
AnHardt
c5961892e3
Bulgarian for all the Configuration.h's
10 years ago
Scott Lahteine
4788b59300
Thermistor values for configurator
10 years ago
Scott Lahteine
7431ef7e2d
Merge branch 'Development' into dev_version
...
Latest upstream commits
10 years ago
Scott Lahteine
eb6e3886f4
Set version to "1.0.3 dev"
10 years ago
Edward Patel
a9ed39b12d
Moved checks into SanityCheck.h + removed previous added checks.
10 years ago
Edward Patel
002340f32c
Merge branch 'Development-Marlin' into Development
10 years ago
Scott Lahteine
7d2c2f1790
Updates for the configurator
...
- Sections in all `Configuration_adv.h`
- Recognize JAPANESE/WESTERN/CYRILLIC options
- Better capturing of comments for tooltips
10 years ago
Scott Lahteine
967db181d0
Latest upstream commits
10 years ago
Edward Patel
d27c82a450
Added check for Delta printers in Mesh, #error not yet supported.
10 years ago
Edward Patel
9a093b2e8f
Added #error + mention not to enable ABL and Mesh at the same time
10 years ago
Edward Patel
61de6ecd54
Added change to example Configuration.h's
10 years ago
Scott Lahteine
c065da52ec
Spacing and spelling
10 years ago
Scott Lahteine
e0d4368cb5
Minor code cleanup, move NUM_AXIS out of config
10 years ago
Scott Lahteine
a469d796e1
Add cleanups needed for #1772
10 years ago
Scott Lahteine
0e8182bbf2
Additional pin tests, cleanup
10 years ago
Scott Lahteine
cda4bd4ad9
Correct the comment about M206
10 years ago
Scott Lahteine
82794fa5f7
Add delta generic not renaming
10 years ago
Scott Lahteine
ba2c7cb467
Update configs with all the latest
10 years ago
Scott Lahteine
edb67ea165
Patch generic delta config
...
- Addressing issue mentioned at #1699
10 years ago
Scott Lahteine
ba871e46bf
Fix compiler warnings
...
- Patched up for most included configurations
10 years ago
Scott Lahteine
bc2f249cc6
Merge pull request #1622 from AnHardt/tm-utf-minus-kanji
...
The big Language Pack
10 years ago
AnHardt
20f909567a
Merge https://github.com/MarlinFirmware/Marlin into tm-utf-minus-kanji
...
Conflicts:
README.md
Solved
10 years ago
Scott Lahteine
5eff15c409
Merge branch 'Development' into fixup_leveling
...
Latest upstream commits
10 years ago
Scott Lahteine
5261d35737
Fix custom m-code behavior
...
Don’t set CUSTOM_M_CODE_SET_Z_PROBE_OFFSET if there’s no Z probe
10 years ago
AnHardt
94330705c7
Move definition of PIDdT back to temperature.h
...
make it unconditional
remove all definitions in the 'Configuration.h's
remove form 'Conditionals.h'
10 years ago
CONSULitAS
045ea42cc8
Merge remote-tracking branch 'upstream/Development' into Development
10 years ago
AnHardt
9d589cbb2a
Merge https://github.com/MarlinFirmware/Marlin into tm3-utf-minus-kanji
...
Conflicts:
Marlin/example_configurations/delta/generic/Configuration.h
Marlin/example_configurations/delta/kossel_mini/Configuration.h
Marlin/language.h
Conflicts solved
10 years ago
Scott Lahteine
8db4fd7177
Merge branch 'Development' into planner_oh_planner
...
Latest upstream commits
10 years ago
Scott Lahteine
0d81abe1c9
Merge branch 'Development' into config_testing
...
Latest upstream commits
10 years ago
Scott Lahteine
01740fd9c6
Merge branch 'Development' into planner_oh_planner
...
Latest upstream commits
10 years ago
CONSULitAS
703f3b38c4
Merge remote-tracking branch 'upstream/Development' into Development
10 years ago
wurstnase
e6f6c6e3a1
fix bad insertion config again
10 years ago
Scott Lahteine
34a41648ab
Merge branch 'Development' into planner_oh_planner
...
Latest upstream commits
10 years ago
Scott Lahteine
4fbb80567e
Get upstream commits
10 years ago
Scott Lahteine
7717e1ce33
Fix bad insert in configuration
10 years ago
Scott Lahteine
146501215f
Fix mangled probe_pt calls
...
- Address issue #1669
- Remove the TOPO_ORIGIN configuration setting
10 years ago
Scott Lahteine
88e81a4804
Latest upstream commits, plus fixes
...
- Also add Manual Bed Leveling to the rest of the configs
10 years ago
Scott Lahteine
2c9bd15625
Move LCD items to `Conditionals.h`
...
- `Conditionals.h` is included twice, setting LCD values the first time
10 years ago
AnHardt
e72cb3e45d
Merge https://github.com/MarlinFirmware/Marlin into tm2-utf-minus-kanji
...
Conflicts:
Marlin/dogm_lcd_implementation.h
Marlin/ultralcd_implementation_hitachi_HD44780.h
Fix merge conflicts 2
10 years ago
Scott Lahteine
63d5d28085
Merge branch 'Development' into config_testing
...
Latest upstream changes
10 years ago
Scott Lahteine
b6d381f863
Divide up Conditionals to get LCD items early
10 years ago
AnHardt
e85061d20d
Added changes to the 'new' Configuration.h s
10 years ago
Scott Lahteine
8ade04b78e
Felix and Hephestos configs
...
- Not sure why these are showing as all new
10 years ago
Scott Lahteine
670006b919
Remove invariant code from Configurations
...
- Add `Conditionals.h` with calculated configuration values
- Add `SanityCheck.h` with checks for configuration errors
- Remove equivalent code from all configurations
- Move error checks from some sources to `SanityCheck.h` also
- Fix initialization of count_direction in stepper.cpp
10 years ago
AnHardt
47c1ea72af
Merge https://github.com/kieranc/Marlin into PIDdebug
...
Conflicts:
Marlin/temperature.cpp
Cleaned merge conflict.
Codeposition had changed.
Variable pid_input had vanished.
Signed-off-by: AnHardt <github@kitelab.de>
10 years ago
CONSULitAS
9c1f6e7ac7
Merge remote-tracking branch 'upstream/Development' into Development
10 years ago
AnHardt
e917477fec
Merge https://github.com/MarlinFirmware/Marlin into tm-utf-minus-kanji
...
Conflicts:
Marlin/dogm_lcd_implementation.h
Marlin/fonts/make_fonts.bat
Claerd conflicts with my own #1621 . (His was easy. :-) )
corrected typo in fonts/README.fonts
Applied changes to the new delta-configurations
and deletet there some extra whitespace at the line-endings.
10 years ago
CONSULitAS
2b1ddc0413
Merge remote-tracking branch 'upstream/Development' into Development
10 years ago
maverikou
e93eb3e8d3
Update test
10 years ago
maverikou
b8ae3feb9e
Update test
10 years ago
maverikou
8a739b6fba
Merge branch 'Development' into delta_auto_bed_level
...
Conflicts:
Marlin/Marlin_main.cpp
10 years ago
Scott Lahteine
a686c9878f
Move TOPO_ORIGIN define to Configuration.h
...
- Addressing issue #1608
10 years ago
CONSULitAS
a8c1bdabd2
Update: readme.md for K8200 example
...
* readme.md: updated typo and URLs
10 years ago
chrono
4d878b9bac
Fixed path typos in README
10 years ago
chrono
12ec557a75
Added DEFAULT_TRAVEL_ACCELERATION
10 years ago
chrono
1d25d510bc
Upstream Merge Fixes
10 years ago
chrono
a89d690b77
Merge remote-tracking branch 'upstream/Development' into pr-felix
10 years ago
alexborro
9157cbd8f3
Add Travel Acceleration and change the M204 options
...
Added option to set Travel Acceleration (non printing moves).
The M204 options was a non sense (S for printing moves and T for retract
moves).
It has been changed to:
P = Printing moves
R = Retract only (no X, Y, Z) moves
T = Travel (non
printing) moves
I will add this info o G-Code wiki in reprap.org. I also advise to put
this info in Marlin next version changelog.
10 years ago
alexborro
60ceca1bc1
Add speed configuration for home-bumping movement
10 years ago
Greg Alexander
4fba7b084f
fix typo in delta example config introduced in
...
commit 697ee2dc50
10 years ago
maverikou
e6862700af
Add Z_RAISE_AFTER_PROBING to all config files
10 years ago
maverikou
39d255608d
Test an extra delta configuration with auto bed leveling code paths
10 years ago
maverikou
7c24b97958
Ported over Johann Rocholl's improvements for delta printers:
...
- Nonlinear auto bed leveling code (includes G29, G30, Z_RAISE_AFTER_PROBING). Cleaned it up to be a delta-specific AUTO_BED_LEVELING_GRID code path.
- Allen key z-probe deployment and retraction code. Cleaned it up and added safety checks.
10 years ago
Scott Lahteine
d085725c86
More sanity-checking for ABL
...
- Moved sanity-checks to Marlin_main.cpp
- Applied to other configuration files
- Fixed formatting of ABL output
- Passing verbose level to probe_pt
- Miscellaneous cleanup
- Put CONFIG_STEPPERS_TOSHIBA into Configuration.h
10 years ago
chrono
0a7d85c20e
Minor fixes
10 years ago
chrono
d8eeddfb93
Updated DUAL Extruder config, added README and enabled NEWPANEL by default
10 years ago
chrono
b423b90c77
Added Configuration_adv.h to examples for LCD/SD Support
10 years ago
chrono
7540a81106
Minor fixes
10 years ago
chrono
08bc723a3c
Enable PIDBED
10 years ago
chrono
e487bd642b
Updated PR to streamline integration
10 years ago
kieranc
8ccdac9898
Enable PID debugging for heated bed
10 years ago
kieranc
29097b0ab2
Enable PID debugging for heated bed
10 years ago
kieranc
21bd4fd6db
Enable PID debugging for heated bed
10 years ago
kieranc
fb56aad898
Enable PID debugging for heated bed
10 years ago
kieranc
08c543f8fb
Enable PID debugging for heated bed
10 years ago
kieranc
c89413db1e
Enable PID debugging for heated bed
10 years ago
kieranc
1c71e4751a
Enable PID debugging for heated bed
10 years ago
maverikou
a9e15aa503
Updated example configurations
10 years ago
Scott Lahteine
27ac3e985d
Add options to example_configurations
10 years ago
Scott Lahteine
7866fa161f
Merge pull request #1476 from Natealus/Development
...
Compiling errors with 4 Extruders defined and Viki 2 Implementation
10 years ago
AnHardt
c246026bda
Sorry.
10 years ago
Natealus
f4b0a40abb
Additional fixes to temperature.cpp and found another missing line
...
Looks like INVERT_E3_DIR was missing in the configuration.h also as I
did a test compile with 4 extruders and Azteeg X3 Pro defined. So I also
added those lines too. Additional formatting to make the comments line
up better in that section.
10 years ago
Natealus
38a500d05c
Viki 2 Implementation
...
I've insert the define and pointer entries for the Viki 2 and miniViki
from Panucatt in all of the example configs and main config. With these
additions and with pins done in the old single pin.h style...I was able
to get the display working fine save for needing to turn Delta Segments
per Second down. But that's a common graphics lcd issue being looked
into right now.
I need assistance in understanding how the new divided pins files fit
together because my previous attempts at trying to get it to work
appropriately didn't seem successful. This originally came from trying
to find out how to swap the XYZ Min and Max Endstop pins in the Azteeg
X3 Pro. It only comes with one set of connectors and they're Min
Endstops. My previous experience didn't turn out well trying to tell the
firmware to home to the Min Endstops so the best solution I found was to
swap the pins in the firmware. If I'm missing a conflict with a setup
other than delta please let me know, but it makes sense in my setup.
10 years ago
Natealus
697ee2dc50
Compiling errors with 4 Extruders defined
...
Here were a few changes that I had to make/add lines for the 4th hotend.
A compiling problem in the Temperature.cpp and missing lines in
configuration.h and configuration_adv.h. I added these lines in all of
the example configs too.
10 years ago
CONSULitAS
cfbb94a2a8
K8200: Example Configuration.h fixed
...
Example Configuration.h: fixed strange white characters preventing
compilation in lines 1 and 3 - oops
10 years ago
CONSULitAS
0de5083aff
K8200: Example Configurations readme.md updated
...
Example Configurations for K8200 readme.md updated
* readme.md: added description for german umlaut support on LCD
10 years ago
CONSULitAS
c421ffd520
K8200: Example Configuration_adv.h back in sync
...
Example Configuration_adv.h for K8200 back in sync
* Configuration_adv.h: rebased and added missing changes for 4th
extruder
10 years ago
CONSULitAS
0575dd10de
K8200: Example Configuration.h back in sync
...
Example Configuration.h for K8200 back in sync
* Configuration.h: rebased and added missing changes
* Configuration.h: updated comments for K8200
10 years ago
AnHardt
2abf1ad940
Distribute recent changes in Configuration.h to the examples.
10 years ago
Scott Lahteine
b3973ed224
Fix HD44780 misspelled as HD44870
10 years ago
Scott Lahteine
6d81968db5
Merge pull request #1450 from docdawning/Development
...
Normalized section headers, added some headers, added help URLs for newb...
10 years ago
DocDawning
5bb3933b21
Fixed n00bsauce
10 years ago
DocDawning
d109cd940b
Normalized all configuration files to include my new section headers and the like.
10 years ago
AnHardt
26e55471f8
Update example configurations.
10 years ago
Scott Lahteine
0af9a0bf57
url to firmware downloads
10 years ago
Scott Lahteine
07639053fb
Add support for BQ Prusa i3 "Hephestos"
10 years ago
Victor Andueza
13118cde33
Add bq Witbox 3D printer
10 years ago
AnHardt
75cf302da3
example configurations changed to meet Configuration.h
10 years ago
Scott Lahteine
3a9a3e5ed8
Fix Issue #1356 – remove EXTRUDER1_Z_OFFSET
...
This define is not used.
10 years ago
CONSULitAS
d1322dafc9
Add: Example Configuration for Vellemann K8200 - based on new BOARD_K8200 #1391
...
# Add: Example Configuration for Vellemann K8200 - based on new
BOARD_K8200 #1391
* K8200: new folder in example_configurations for Vellemann K8200 (3Drag
clone - should work with 3Drag http://reprap.org/wiki/3drag , too. Please
report)
* K8200/Configuration.h/Configuration_adv.h: updated manually with
parameters form genuine Vellemann Firmware "firmware_k8200_marlinv2"
based on the recent development branch
I tested the changes on my K8200 with 20x4-LCD and Arduino 1.0.5 for
Windows (SD library added to IDE manually) - everything works well
10 years ago
CONSULitAS
51c7f2fd5a
Revert "## Add: Example Configuration for Vellemann K8200"
...
This reverts commit 5333590ac2
.
10 years ago
CONSULitAS
5333590ac2
## Add: Example Configuration for Vellemann K8200
...
* K8200: new folder in example_configurations for Vellemann K8200 (3Drag
clone - should work with 3Drag too, please report)
* K8200/language.h: updated machine name and URL for K8200
* K8200/Configuration.h/Configuration_adv.h: updated manually with
parameters
form genuine Vellemann Firmware "firmware_k8200_marlinv2" based on the
recent development branch
* K8200/files by Vellemann: added folder with original files from
Vellemann homepage, since there is no GitHub fork you could link to by
them
I tested the changes on my K8200 with 20x4-LCD and Arduino 1.0.5 for
Windows - everything works well
10 years ago
Dino Del Favero
5cfe13f240
Correct some mistakes
10 years ago
Caleb Anderson
991a74b75b
Move delta calibration menu to sample delta configuration.
...
Turn off by default.
10 years ago
alexborro
3afe66bb0c
Fix issues #1248 , #1240
...
- Fixed issue when BAL area probing is shorter than it should be for
grid probing
- Warning when BAL activated with Delta Kinematics
- Fix XY_TRAVEL_SPEED when homing Z axis
10 years ago
Scott Lahteine
2f467e2797
LCD Progress Bar
10 years ago
daid
17de96ace7
Merge branch 'Marlin_v1' into revert-1154-sd_sorting
...
Conflicts:
Marlin/cardreader.cpp
Marlin/cardreader.h
10 years ago
Scott Lahteine
6880e93b75
Happy configs
10 years ago
Scott Lahteine
3b1f186c0c
Clean up configs
10 years ago
Scott Lahteine
f83d0f2a68
Defines for electronics boards
...
Added boards.h which contains defines for all the board numbers, plus
some shorthand macros for less typing.
10 years ago
Bo Herrmannsen
174f8d3631
Added example configs for printers from http://tvrrug.org.uk/
10 years ago
Scott Lahteine
07c6b5ab71
Using axis constants
10 years ago
alexborro
ab355a90d3
Revert "SD Sort and Buffer"
10 years ago
Scott Lahteine
29e854c535
Disable SDCARD_SORT_ALPHA by default
...
For legacy boards it’s better if this option is disabled.
10 years ago
Scott Lahteine
6599adc184
Polish up a little...
10 years ago