82 Commits (2fd8c248fe296818c902a1db65fbdc79cce91abf)

Author SHA1 Message Date
Blair Thompson 2fd8c248fe Added Fan control to the pre-heat settings.
I find that the PID routine works better when the cooling fan is switched on
at the beginning of a warm up routine.  Otherwise when you enable the fan
just before a print, you have a delay as the PIDre-adjusts.

This should also be safer as most cooling fans are directed at the hot -ends
thermal barrier!
13 years ago
Blair Thompson d9f2f509d5 Added new menu items under the prepare submenu.
Instead of a single pre-heat, now there is pre-heat ABS and PLA options
Added defines to the configuration file to adjust preheat temperatures for both
13 years ago
Erik van der Zalm ae3e7586c6 Added HOME_POS. This adds the posibility to make the center 0
Updated the Xsteps ... settings via the LCD menu
13 years ago
Erik van der Zalm 8816ef1c64 Small fixes after merge 13 years ago
Erik van der Zalm d298dd121f merged SBUBA82 and Justblair 13 years ago
Blair Thompson a05a261b72 Added a workaround. Ramps SD card does not have sdcarddetect. My temporary solution is to add a momentary swtich
that pulls down the SDCARDDETECT pin and mimicking the pull and reinsert ofa a SD card
13 years ago
Blair Thompson 1b6765ed12 Updated the pin config for RAMPS 1.3 to include ultimaker new style LCD/Rotary Encoder interface 13 years ago
Christian Thalhammer e661578c84 support for GEN7 1.1,1.2 and 1.3 13 years ago
Christian Thalhammer d309565b56 Merge remote-tracking branch 'upstream/Marlin_v1' into Marlin_v1
Conflicts:
	Marlin/Configuration.h
13 years ago
Christian Thalhammer 0e3631ff4b smaller changes 13 years ago
Erik van der Zalm fa2e1be0ca changed default EXTRUDE_MINTEMP to 170. 13 years ago
Erik van der Zalm 154de69c02 Print configuration.h version during startup (thanks hairykiwi) 13 years ago
Erik van der Zalm 9173a5713b Teensylu support. 13 years ago
Erik van der Zalm bdb70c0509 Warning for 10k thermistor 13 years ago
Erik van der Zalm d8a0c6450f Split the configuration file in two parts.
One for common settings.
One for advanced settings.
13 years ago
Erik van der Zalm f9c5333f97 Made "stop heating wait" optional.
Default off.
13 years ago
Christian Thalhammer 13e2ad2831 - added info for using GEN7 configuration 13 years ago
Erik van der Zalm 9f139d6e0e Added MAX6675 support. (Thanks to gregfrost)
Needs some work to remove the blocking in read max6675.
13 years ago
Erik van der Zalm e45e5c68bb Added support for Gen3+ (Pins file only)
Added late z enable. (blddk request)
Only calculate look ahead if >2 moves in buffer.
Removed some FORCE_INLINE to save memory.

Signed-off-by: Erik van der Zalm <erik@vdzalm.eu>
13 years ago
Bernhard 212515148e added m240 photography support. default off 13 years ago
Bernhard 415aadf704 lcd panel bed support
advance and ultipanel not any more in default config
13 years ago
Erik van der Zalm 84d9cf7339 merging 13 years ago
Erik van der Zalm e017228569 Merged multiple extruder support.
Soft PWM. (Sanguinololu can also have PID temperature control)
Interrupt save WRITE for addresses > 0x0FF
13 years ago
Bernhard 01001b89d2 repaired nozzle runout prevention to not collide with automatic stepper disabeling. 13 years ago
Bernhard 88ee053af0 heating up santity, formarly knows as "watchdog", but renamed due to the existance of the real watchdog, works now. 13 years ago
Bernhard 2bc5e7ec9e prevent too long extrudes, or too cold extrudes 13 years ago
Bernhard aa4f9a6474 better values. 13 years ago
Bernhard 87fd249c43 made runout prevention independent of tempeorarily set esteps 13 years ago
Bernhard 1ec0c3b68a extruder runout prevention. 13 years ago
Bernhard 5b4625f79c added a partial release option to "m84" aka "stepper release". If you do tiny layers, you might want to keep the z-axis powered to not loose height positioning after homeing. 13 years ago
Denis B 4fd75dc813 Working version of multiple extruders (up to 3)
- The temperature control is pretty much complete
  (not sure what to do w/ autotemp though)
  Changed the pins assignment to clearly separate bed and extruder heaters
  and temp sensors, changed a bit how termistor tables are handled.
- The steppers control is rudimentary
  (only chanages what pins it uses depending on the active_extruder var,
   but that's enough for switching extruder in the start.gcode in the
   the profiles)
- Tested only w/ RAMPS 1.4
13 years ago
Erik van der Zalm b99c49ec3b Add option to only check endstop when homing 13 years ago
Erik van der Zalm 95a0b28acb Merge branch 'Marlin_v1', remote-tracking branch 'origin/Marlin_v1' into Marlin_v1 13 years ago
Erik van der Zalm af22e9cd38 Some advance modifications 13 years ago
Bernhard 4f909963e4 make QUICKHOME configureable 13 years ago
Erik van der Zalm 6b86f15686 More 2nd extruder implementation. (Not usable)
Advance (not tested)
13 years ago
Bernhard 59205ac5fc preliminiary implementation for the early heating finish.
Might be replaced by something more clever, e.g. by erik, and does not yet support the second extruder or the bed.
its kind of not so cool, because you need 6 more ints.
Maybe isheating() should use the degrees directly, as it is not used in time-critical anyways.
Then it would be much easier. to have the offsets without additional variables.
13 years ago
Erik van der Zalm f75f426dfa Removed interrupt nesting in the stepper ISR.
Add serial checkRx in stepper ISR.
Copied HardwareSerial to MarlinSerial (Needed for checkRx).
13 years ago
Erik van der Zalm aad4b75b94 First parts 2nd extruder 13 years ago
Bernhard a0dc66f7bf Home retract distance configureable per axis. 13 years ago
Bernhard 6d6f323535 make an option if sd-card stop should release the steppers. 13 years ago
Bernhard 74d0032e25 cooldown blocking selectable by #define. 13 years ago
Erik van der Zalm c0f8c9fd72 Seperate ENDSTOP_INVERTING for X Y and Z
Added simple endstop filter.
Corrected M114 count display.
13 years ago
Erik van der Zalm 2e43f9c809 Changed min max temperature code. 13 years ago
Bernhard Kubicek 8a1e719a3f overworked config file 13 years ago
Bernhard Kubicek f52e1a9571 autotemp working, default=disabled. 13 years ago
Bernhard Kubicek 70650c331d corrected the ultimaker default values, the previous had a calculation error: see: http://groups.google.com/group/ultimaker/browse_thread/thread/91906788639703cf 13 years ago
Erik van der Zalm b15902d3b5 Fixed bug in configuration.h 13 years ago
Erik van der Zalm e63e224a33 Merge remote-tracking branch 'origin/Marlin_v1' into Marlin_v1
Conflicts:
	Marlin/Configuration.h
	Marlin/Marlin.pde
13 years ago
Erik van der Zalm e7dca8614b Advance experiments. Not working yet. 13 years ago