daid
2a77c84c8f
Updated SERIAL define to MYSERIAL, because Arduino 1.0 defines SERIAL as 0.
13 years ago
Erik van der Zalm
f87c80889f
Fixed M109 timer overflow (reported by triffid)
13 years ago
Erik van der Zalm
154de69c02
Print configuration.h version during startup (thanks hairykiwi)
13 years ago
Erik van der Zalm
598eb1d4f1
Fixed compilation for gcc-4.6.2 with avr-lib-1.8.0 (thanks daid)
13 years ago
Erik van der Zalm
9173a5713b
Teensylu support.
13 years ago
Erik van der Zalm
5113513cb2
RC 1
13 years ago
Erik van der Zalm
d8a0c6450f
Split the configuration file in two parts.
...
One for common settings.
One for advanced settings.
13 years ago
Erik van der Zalm
e45e5c68bb
Added support for Gen3+ (Pins file only)
...
Added late z enable. (blddk request)
Only calculate look ahead if >2 moves in buffer.
Removed some FORCE_INLINE to save memory.
Signed-off-by: Erik van der Zalm <erik@vdzalm.eu>
13 years ago
haxar
6cc6029d7a
M109 EOL fix when TEMP_RESIDENCY_TIME is undefined; printer interface (pronterface) could not see target extruder heater temperature to continue print
13 years ago
Bernhard
157aa7f2fd
m115 eol fix
13 years ago
Bernhard
7aeb45303d
small mistake
13 years ago
Bernhard
cee5f9020a
added suicide pin for a power supply to the arduino that is only active if the arduino is holding high for an output.
13 years ago
Bernhard
57f9359a41
simplified the includes, makefile now works with arduino23
13 years ago
Bernhard
3c1a4aac2b
header file simplification
13 years ago
Bernhard
212515148e
added m240 photography support. default off
13 years ago
Erik van der Zalm
554cc1718d
Fiexed E_ENABLE_PIN errors
13 years ago
Erik van der Zalm
617968ab76
G92 fix
13 years ago
Erik van der Zalm
84d9cf7339
merging
13 years ago
Erik van der Zalm
e017228569
Merged multiple extruder support.
...
Soft PWM. (Sanguinololu can also have PID temperature control)
Interrupt save WRITE for addresses > 0x0FF
13 years ago
Bernhard
06411d5c9e
ultralcd can now also stop the wait loop for the hot-end m109 heating when stopping sd prints.
13 years ago
Bernhard
01001b89d2
repaired nozzle runout prevention to not collide with automatic stepper disabeling.
13 years ago
Bernhard Kubicek
f6fe7143e4
Merge pull request #29 from k-eex/Marlin_v1
...
Fix M201 not saving settings in all places, so the changes did not get written into EEPROM
13 years ago
Bernhard
dde4b40fa9
disable steppers in runout prevention
13 years ago
Bernhard
2bc5e7ec9e
prevent too long extrudes, or too cold extrudes
13 years ago
Bernhard
aa4f9a6474
better values.
13 years ago
Bernhard
87fd249c43
made runout prevention independent of tempeorarily set esteps
13 years ago
Bernhard
1ec0c3b68a
extruder runout prevention.
13 years ago
Bernhard
5b4625f79c
added a partial release option to "m84" aka "stepper release". If you do tiny layers, you might want to keep the z-axis powered to not loose height positioning after homeing.
13 years ago
Keegi
bae1e422f6
Fix M201 not saving settings in all places, so the changes did not get written into EEPROM
13 years ago
Bernhard
986f0ba76c
moved <stdio.h> to more dominant location.
13 years ago
Bernhard
460b788d78
repaired homing position setting.
13 years ago
Denis B
4fd75dc813
Working version of multiple extruders (up to 3)
...
- The temperature control is pretty much complete
(not sure what to do w/ autotemp though)
Changed the pins assignment to clearly separate bed and extruder heaters
and temp sensors, changed a bit how termistor tables are handled.
- The steppers control is rudimentary
(only chanages what pins it uses depending on the active_extruder var,
but that's enough for switching extruder in the start.gcode in the
the profiles)
- Tested only w/ RAMPS 1.4
13 years ago
Bernhard
12e8edcac3
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1
13 years ago
Bernhard
cf50ba140f
added M503 to display eeprom storage, and renamed eeprom routings. This version is compatible with the qtmarlin eeprom-tab.
13 years ago
Erik van der Zalm
b99c49ec3b
Add option to only check endstop when homing
13 years ago
Bernhard
7714b98da7
solved some compiler warnings that are now visible in arduino 1.0.
...
Found a couple of unused variables, that I commented.
Tried to solve the program memory warning message, and failed.
13 years ago
Bernhard
dfd240b260
overworked autotemp, removed one layer of nesting from the ultralcd.
13 years ago
Bernhard
4f909963e4
make QUICKHOME configureable
13 years ago
Bernhard
b0c3871750
more fixing of the sanguino math round problem
13 years ago
Bernhard
716e89b87c
first homing move diagonal towards home switches.
13 years ago
Bernhard
e4ab0e5982
more inlines
13 years ago
Bernhard
8cb29921a0
possible stepper release after sd printing
13 years ago
Bernhard
044886b4a0
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1
13 years ago
Erik van der Zalm
6d95644c0d
Moved M88 into M84. (M84 E)
13 years ago
Bernhard
311627141b
Merge branch 'smallopt' into Marlin_v1
...
Conflicts:
Marlin/temperature.h
13 years ago
Erik van der Zalm
7216a12856
Disabled M88 for boards that don't have seperate enable pins.
13 years ago
Erik van der Zalm
98805c9228
Added M88 command. (Request from Action68)
13 years ago
Erik van der Zalm
f75f426dfa
Removed interrupt nesting in the stepper ISR.
...
Add serial checkRx in stepper ISR.
Copied HardwareSerial to MarlinSerial (Needed for checkRx).
13 years ago
Bernhard
2d9a715655
first naive attempt to have a offset in the homeing procedure. Does not enable to move into regions not allowed by endstops.
13 years ago
Bernhard
d2f034ba84
lcd message from gcode, m117
13 years ago