e0a6ee8da5
[2.0] Fix up G33, LPC1768 + SDCARD_SORT_ALPHA ( #8250 )
...
* Update Conditionals_post.h
* Add a cast to round() to convert to a unsigned int
Add's a cast to round() so that it will compile properly. round() returns a float which must be cast to a integer for the following % operation. Use a unsigned int as a negative index to an array is wrong. Should never be more than 255 points allowing us to use a 8 bit cast.
* Update G33.cpp
7 years ago
dac1f6fe74
Tweaks to cubic_b_spline code style
7 years ago
4df024d7b9
Merge pull request #8234 from thinkyhead/bf2_native_operation
...
[2.0.x] Operate in Native Machine Space
7 years ago
601ccded89
Fix case-insensitive config issue
7 years ago
f8393a0908
Operate in Native Machine Space
7 years ago
d83a9a53e8
Merge pull request #8220 from thinkyhead/bf2_serial_port_-1
...
[2.0] Add SERIAL_PORT -1 option for configurators
7 years ago
93ba72ea83
Add SERIAL_PORT -1, set on SBASE, STM32F103RET6
7 years ago
7e43dd1d23
Fix probes configuration url
...
Based on #8241 by @machaj
7 years ago
ca0e4b4e96
Some cleanup around 'lcd_bootscreen()' and 'lcd_kill_screen()'
...
Move 'lcd_bootscreen()' from `lcd_init()` to 'setup()' where it is cexecute exactly once. Saves 'bool show_bootscreen'.
Move the call of 'lcd_custom_bootscreen()' to the begin of 'lcd_bootscreen()'.
Move the delays into the related functions.
Move the picture loop around 'lcd_kill_screen()' into the function.
7 years ago
84b93d941f
Merge pull request #8178 from thinkyhead/bf2_config_tweak
...
[2.0.x] Faster menu navigation for Anet A8
7 years ago
70be4d206e
[2.0.x] UltiMachine Archim2 ( #8190 )
...
* UltiMachine Archim2 support
* SPI gets included by the library
* Invert TMC2130 diag pin state
* Clean up Archim2 pins
* Update Archim2 config
* FAN2 -> FAN1
* Cleanup
* Add brief Archim installation instructions
* Bring pins into compliance
* Update 1.0 SD Detect pin for 1.1
* Update Configuration.h
* Update pins_ARCHIM2.h
7 years ago
f3deb37bdf
Merge pull request #8236 from thinkyhead/bf2_protect_M303
...
[2.0.x] M303 thermal runaway protection
7 years ago
31f112cf58
Cleanup trailing whitespace
7 years ago
2f9e42feb9
M303 thermal runaway protection
7 years ago
e5ae545647
Remove ADCKey steps acceleration
7 years ago
6827e243a0
[2.0.x] G33 magic numbers ( #8171 )
...
* [2.0.x] G33 magic numbers
* oops
* Comments
* oops
* warning
* better comment section
* remarks
* extra grids
7 years ago
8735ae984b
Merge pull request #8227 from tcm0116/2.0.x-pin_mapping
...
LPC1768: updates to use the new pin_t typedef
7 years ago
c72a0610b4
Fix watchdog in WATCHDOG_RESET_MANUAL mode AVR
7 years ago
13d839795c
LPC1768: updates to use the new pin_t typedef
7 years ago
eb13b8d985
Add MKS Gen L board
7 years ago
063e957fc4
Update pins_MKS_SBASE.h ( #8188 )
...
* Update pins_MKS_SBASE.h
Deleted E_MUX2, not used.
Changed #define LCD_PINS_D4 P0_14 // EXP1.5 to #define LCD_PINS_D4 P0_15 // EXP1.5, wrong in MKS's pinout schematic.
Swapped TEMP_BED_PIN and TEMP_0_PIN port's, request from user, more logical...
* Update pins_MKS_SBASE.h
Moved MUX signals to J8 and re added MUX2, cleaner wiring..
7 years ago
f7133e53fd
Fix case light off
...
Addressing #8205
7 years ago
0108d5181f
Allow asterisks in G-Code commands
...
Addressing #6655
7 years ago
34745b2183
Organize boards.h by architecture
7 years ago
9cc1d8e312
[2.0.x] Support for SilverGate Board
7 years ago
03e5369411
Faster menu navigation for Anet A8
...
Addressing #8166
7 years ago
f1edf83720
Merge pull request #8187 from rafaljot/patch-5
...
Update InterruptVectors_Due.cpp
7 years ago
b2bd77c40a
Merge pull request #8191 from thinkyhead/bf2_rearm_more
...
[2.0.x] Add SDCARD_SORT_ALPHA options for LPC1768
7 years ago
571ced712d
Add SDCARD_SORT_ALPHA options for LPC1768
7 years ago
778e4e4c23
Update InterruptVectors_Due.cpp
...
const pfnISR_Handler *isrtab = get_relocated_table_addr();
What compiler do you use? Arduino 1.8.5 can't compile this "const".
7 years ago
cae8703e0d
Merge pull request #8181 from thinkyhead/bf2_fix_bootscreen_repeat
...
[2.0.x] Only show custom bootscreen once
7 years ago
a516856df9
Only show custom bootscreen once
7 years ago
727a403ba1
[2.0.x] Fix NO_MOTION_BEFORE_HOMING unwanted behaviour ( #8176 )
...
* [2.0.x] Fix NO_MOTION_BEFORE_HOMING unwanted behaviour
NO_MOTION_BEFORE_HOMING should prevent XYZ movements only when homing is not done.
E axes should be allowed
* Update G0_G1.cpp
* Update G0_G1.cpp
7 years ago
577659cacf
Basic support for Azteeg_X5_GT ( #8139 )
...
* Basic support for Azteeg_X5_GT
Signed-off-by: Alexey Shvetsov <alexxy@gentoo.org>
* Add fan pins for AZTEEG X5 GT
Signed-off-by: Alexey Shvetsov <alexxy@gentoo.org>
* Fix endstop pins
* Add servo0 pin
7 years ago
0b02f9cc33
Merge pull request #8168 from thinkyhead/bf2_config_tweak
...
[2.0.x] Apply Re-ARM SPI review items
7 years ago
04c0d9f3c3
Implement kinematic software endstops
7 years ago
9f89b5d876
Fix for MAX_VFAT_ENTRIES sanity check
7 years ago
2cdde08339
Apply items specified in code review
...
Followup to #8122
7 years ago
34be5d33c0
The plural of 'axis' is 'axes'
7 years ago
6e5f13a5c2
Merge pull request #8122 from Bob-the-Kuhn/2.0.x-restore-Re-ARM-RepRap-Discount-Full-Graphics-fix-(partial-solution)
...
2.0.x - Restore fix for garbaged display on Re-ARM with RepRap Full Graphics Smart Controller
7 years ago
b7a66742dd
tested
...
add sort alpha section to other LPC1768 boards
7 years ago
bbc2e66634
Fix AZSMZ MINI pins for new LPC1768 pinmapping
7 years ago
31e96935f7
Fix EXTRA_FAN_SPEED
...
Addressing #8158
7 years ago
c94dce6b32
Merge pull request #8113 from thinkyhead/bf2_fixup_sd_reprint
...
[2.0.x] Cleanup after SD Print Again, whitespace, tabs
7 years ago
ce1c9c0808
Tweak QUICK_HOME description
7 years ago
12458cefc4
Remove 5s timer hack. Encoder pos is saved on print start!
7 years ago
9a4cf11835
Remove return_to_status_ms hack, just use defer...
7 years ago
8949c8c0a5
Move SD_REPRINT_LAST_SELECTED_FILE to ultralcd.cpp
7 years ago
817175613a
Merge pull request #8157 from thinkyhead/bf2_anet_10_servo
...
[2.0.x] Define a default SERVO0_PIN for Anet 1.0
7 years ago
723f2a77f6
Implement support for Dual X and Y endstops
7 years ago
e04425281d
Add Dual Steppers / Endstops to configs
7 years ago
edff2c917b
Cleanup for DIGIPOTS settings
7 years ago
3e8754a38a
Add/correct time units on planner vars / M205 B
7 years ago
b2a48f1a04
Provide a SERVO0_PIN for non-standard LCD
7 years ago
b232f39341
AVR: Hidden option to use 8s watchdog
7 years ago
9d4cfd2013
Merge pull request #8142 from thinkyhead/bf2_fix_m303
...
[2.0.x] Fix M303 thermal protection
7 years ago
eae0aea1e0
Fix M303 thermal protection
7 years ago
a1a4fc277e
(2.0.x) serious bug G33 ( #8136 )
...
* (2.0.x) serious bug G33
* Revert config changes
This reverts commit 74b5a98223b7b7fb970d05b8541f4a079c3cfe56.
7 years ago
325233b454
Fix automatic stepper assignment for X/Y/Z dual stepper drivers ( #8130 )
7 years ago
50b4f9cbf7
LPC1768 Pin Mapping and M43 cleanup ( #8119 )
...
* LPC1768 M43 cleanup
* Update pinmapping.h to #define pins
7 years ago
6b1d1a818b
Revert default BABYSTEP_MULTIPLICATOR to 1
7 years ago
ba8dc678f5
Arduino Due XON/XOFF implementation
...
Alos includes emergency parser and configurable TX/RX buffers for Arduino Due.
7 years ago
8d9c3cc2b7
Add a module for Due SRAM-based Interrupt Vector Table
...
This is the ONLY way to be able to override ISRs stolen by the Arduino Runtime, such as Serial or USB device interrupts. This feature is needed so Arduino modules can be replaced and enhanced.
7 years ago
c9bbef6380
Cosmetic fix for HAL_AVR/MarlinSerial.cpp
...
Instead of using const char, it is better to use uint8_t
7 years ago
dcfc2503c2
G33 Autotune calibration update #10
7 years ago
b338cafc65
Merge pull request #8111 from thinkyhead/bf2_fwretract_fix_oct26
...
[2.0.x] Improved Firmware Retraction logic
7 years ago
ada90f7335
Clean up trailing spaces
7 years ago
7fad26549b
Concise SD_REPRINT_LAST_SELECTED_FILE description
7 years ago
33f379fe88
Add some Polish language
...
Thanks @SCiunczyk
7 years ago
daeff5a11a
Tweak neopixel self-test
7 years ago
0ceec1f166
Fix leveling_active_at_z warning
7 years ago
eb02f8c719
Improve FWRETRACT logic, add common sense
7 years ago
bd78ca0ee3
Add M290 Babystepping
7 years ago
ce5f0ec85a
Bring STM32 example config up to date
7 years ago
46e9eae159
Tweak to M100 config comment
7 years ago
c45514f811
Merge pull request #8094 from thinkyhead/bf2_neopixel_led_parity
...
[2.0.x] Bring NEOPIXEL_LED into parity with 1.1.x
7 years ago
229a27a1c7
save FLASH by using reduced font for some languages
7 years ago
3f5f39576b
Reprint option for last SD Memory card file ( #8106 )
...
* Re-Print of same SD Memory Card file with single click
* Re-Print of same SD Memory Card file with single click
* This is the bugfix-v2.0.0 version of https://github.com/MarlinFirmware/Marlin/pull/8104
7 years ago
9e699811d2
Make LPC1768 pinmapping not specific to Re-ARM ( #8063 )
...
* Merging early because of build failures. See #8105
* Make LPC1768 pinmapping not specific to Re-ARM
* Add HAL_PIN_TYPE and LPC1768 pin features
* M43 Updates
* Move pin map into pinsDebug_LPC1768.h
* Incorporate comments and M226
* Fix persistent store compilation issues
* Update pin features
* Update MKS SBASE pins
* Use native LPC1768 pin numbers in M42, M43, and M226
7 years ago
3ac581eac9
Neopixel changes for parity with 1.1.x
7 years ago
7b3098bbd5
Add AZSMZ Mini ( #8005 )
...
* Add AZSMZ Mini
* Remove tabs, adjust spacing
* Renumber boards to group by family
* Patch up spacing
* Tweak
7 years ago
e00ed10c4c
GT2560 config MKS_MINI_12864 => SDSUPPORT
7 years ago
10a5e4d80f
Merge pull request #8078 from thinkyhead/bf2_mks_mini_lcd
...
[2.0.x] Add MKS MINI 12864 support to GT2560
7 years ago
ee9b8bf0f1
Add MKS MINI 12864 support to GT2560
7 years ago
f65fc7ffab
Merge pull request #8044 from thinkyhead/bf2_mesh_consolidate
...
[2.0.x] Simplify mesh bounds config
7 years ago
070cd34fe8
Merge pull request #8077 from thinkyhead/bf2_MKS_BASE_followup
...
Clean up HAL trailing spaces, MKS SBASE pins
7 years ago
7f55d82fd1
Move UBL_SAVE_ACTIVE_ON_M500 to Configuration.h
7 years ago
90a14b4f5b
Clean up HAL trailing spaces, MKS SBASE pins
7 years ago
51fafccc16
[2.0.x] Enable hardware serial ports on LPC1768 ( #8004 )
...
* Enable hardware serial ports on LPC1768
* Fix compilation errors with other HALs
* FIx order of includes in LPC1768 HAL main.cpp
* Add support for RX_BUFFER_SIZE and TX_BUFFER_SIZE options in Configuration_adv.h
7 years ago
580b6e9089
Apply physical limits to mesh bounds
7 years ago
4e2baeb3e1
Update indentation, file-wrapping for Marlin 2.0.x
7 years ago
60af705e6d
Relocate SPI.h to the HAL folder
7 years ago
46aae4c6e7
Merge pull request #8074 from thinkyhead/bf2_verbiage_like_8061
...
Fix some config verbiage
7 years ago
3356d5a72d
Merge pull request #8072 from thinkyhead/bf2_fix_M600
...
[2.0.x] Fix position sync in M600 pause/resume
7 years ago
5f87324536
Fix some config verbiage
7 years ago
272f9f65dc
Fix some typos
7 years ago
8181220bfd
Fix position sync in M600 pause/resume
7 years ago
6296ab2173
Add GFX overlay to UBL mesh edit ( #8038 )
...
* Add GFX overlay to UBL mesh edit
Fixed misplaced HAS_TEMP_BED in dogm_bitmaps.h
rename _lcd_babystep_zoffset_overlay to _lcd_zoffset_overlay_gfx and move it out of BABYSTEP_ZPROBE_OFFSET to we can use it for over things. Add this function into UBL mesh edit screen.
update all Configuration.h to add ENABLE_MESH_EDIT_GFX_OVERLAY
* Add Sanity to UBL insanity
Need to check for DOGLCD otherwise error out.
7 years ago
72156a2029
change to better (more clear) names ( #8050 )
...
set_destination_to_current() changed to set_destination_from_current()
set_current_to_destination() changed to set_current_from_destination()
7 years ago
0cb423b5b3
Apply consistency for other configs
7 years ago
8c78f8f790
Add Makeboard MINI for Micromake C1
7 years ago
1fbb307aaf
Merge pull request #8021 from thinkyhead/bf2_scroll_longnames
...
[2.0.x] Add SCROLL_LONG_FILENAMES to reveal longer filenames
7 years ago
3d2b2eb1ca
Prevent SDCARD_SORT_ALPHA from exploding
7 years ago
783ddf9691
Add SCROLL_LONG_FILENAMES option
7 years ago
5439358281
Basic UBL operations working on 32-bit platforms ( #8024 )
...
* 32-bit work for UBL
* Update FT i3-2020 reference file
7 years ago
9e5cbf0198
BQ should set this in its config, and does
7 years ago
348e5e3109
Simplify Cartesian probing boundaries
...
Followup to #8012
7 years ago
3986a84f77
boolval revisited ( #8016 )
7 years ago
572cf0ec95
UBL able to generate mesh and save and load it on 32-bit platforms ( #8015 )
...
* Get UBL Mesh Generation, Mesh Save & Mesh Load working with 32-Bit platforms
* clean up read_data() and write_data() for non-LPC1768 HAL's
* Get read_data() and write_data() return codes consistent
All HAL's read_data() and write_data() return false if they succeed.
* Get read_data() and write_data() return codes to be consistent
Make read_data() and write_data() return true if an error happens.
* Say UBL is now checked out on machine types in default Configuration.h file.
7 years ago
67cc29cd3c
Update UBL mesh boundaries to accomidate beds centered at 0, 0 ( #8012 )
7 years ago
6cb26c98c8
Fix Baby Stepping on 32-Bit platforms ( #8001 )
...
Also, Max7219 debug code was used for this effort. It has been
improved and hardened.
7 years ago
3b7b0492f8
Merge pull request #7993 from jeffyl/bugfix-2.0.x
...
[2.0.x] Proper support for AZSMZ 12864 LCD on SmartRAMPS
7 years ago
26531f2715
Add lcd to all sample configs
7 years ago
ce48403a0b
Add EXTRA_FAN_SPEED feature
...
Based on #7883 by @studiodyne
7 years ago
eeb4611606
Add proper support for the AZSMZ 12864 LCD on a SMART RAMPS
7 years ago
c46189e429
Fix UBL+Delta segmented feedrate
...
Based on #7948
7 years ago
5c4f3e0107
Add LCD_SET_PROGRESS_MANUALLY
7 years ago
014a83fe09
Merge pull request #7984 from thinkyhead/bf2_micromake_c1
...
[2.0.x] Micromake C1 Configurations, Unaccented French
7 years ago
bc7df0188e
Add Micromake C1 configurations
7 years ago
34a261416f
Add unaccented French language
7 years ago
e587f0893c
Define AVR_ATmega2560_FAMILY_PLUS_70 in Conditionals
7 years ago
fd128b3c93
Fix some AVR HAL code style
7 years ago
799360c576
Enhance Teensy/RAMPS pins files
7 years ago
d3e5a22a5d
Add MIN_SOFTWARE_ENDSTOP_[XYZ] to example configs
7 years ago
b206f70693
Split the software endstop capability by axis.
7 years ago
ec69e97bda
Merge pull request #7974 from jeffyl/bugfix-2.0.x
...
Fix include path for VIKI
7 years ago
91e28edda6
[2.0.x] Add new board: MKS Sbase ( #7945 )
...
* Add files via upload
* Add files via upload
* Add files via upload
* Checked LCD / edited / revised pins_MKS_BASE.h
As requested :)
* Delete Configuration_adv.h
* Delete Configuration.h
* Deleted /Marlin/Marlin/src/config/examples/MksSbase/*.* and moved them to /Marlin/Marlin/src/config/examples/Mks/Sbase/*.*
* Add files via upload
7 years ago
3c8a3a02ba
Fix include path for VIKI
7 years ago
4586acad8c
Merge pull request #7959 from alexxy/bugfix-2.0.x
...
Python isnt always python2
7 years ago
497f86453e
Merge pull request #7964 from gallynero/patch-2
...
fix 'axis_unhomed_error' not defined error
7 years ago
c0dddd4233
Tweaks to tool_change, GcodeSuite::T()
7 years ago
ca66574062
ADC sensor fix inspired by 'Evgen2' on Twitter
7 years ago
1344ca4b2f
UBL no longer needs ubl_state
7 years ago
8dd08425fd
Improve LCD leveling edits
7 years ago
3e3911fb81
Use planner.leveling_active for all leveling systems
7 years ago
32c607ffe2
Ensure fade factor is recalculated if fade height changes
7 years ago
ca1e47375c
Move fade_scaling_factor_for_z to Planner
7 years ago
9a930ebec2
Make leveling_is_active a macro
7 years ago
58abc66c1d
Tweak bed leveling conditionals
7 years ago
1adb5a6a48
Remove obsolete UBL z_offset
7 years ago
3619a4cbea
fix 'axis_unhomed_error' not defined error
...
Fix 'axis_unhomed_error' not defined error when pause with unhomed status
7 years ago
12d212d1b4
Python isnt always python2
...
So now this script is compatible with both python versions 2 and 3
Signed-off-by: Alexey Shvetsov <alexxy@gentoo.org>
7 years ago
cc01a36363
Merge pull request #7947 from thinkyhead/bf2_more_READMEs
...
[2.0.x] Add a README.h file for Arduino IDE users
7 years ago
4764710b11
Add a README.h file for Arduino IDE users
7 years ago
4e3ee845b9
config_adv ( #7941 )
...
get rid of twi.h
move to board files
7 years ago
0e260c6c1d
Get FolgerTech i3-2020 working again with 32-bit platforms ( #7944 )
...
Setup FolgerTech i3-2020 Configuration files as a reference platform for
32-Bit work.
Also fix MAX7219 debug lights on 32-bit platforms.
7 years ago
26bfae58d4
MPC4451 I2C support
7 years ago
1f5c432e29
Merge pull request #7920 from thinkyhead/bf2_neopixel_full
...
[2.0.x] Move FILAMENT_RUNOUT_SENSOR to a feature
7 years ago
732e87e83c
Merge pull request #7892 from GMagician/Serial-double-echo-fix
...
[2.0.x] Serial double echo fix
7 years ago
f8e8fcb978
Move FILAMENT_RUNOUT_SENSOR to a feature
7 years ago
a11e6a1022
Different NEOPIXEL types
...
Same as #7728 but for 2.0.x,
Lot of cleanup and remove references in whole code to other "LED files" than leds.h. Now will be much easier to add next drivers/libraries. e.g. FastLED. But bad news, currently FastLED is suporting only RGB devices (no RGBW)
7 years ago
b30b55307c
Merge pull request #7909 from thinkyhead/bf2_goodbye_legacy_advance
...
[2.0.x] Remove legacy ADVANCE feature
7 years ago
1d04197f2f
Merge pull request #7916 from thinkyhead/bf2_probeless_ubl
...
[2.0.x] Allow UBL G29 and G26 to build without a probe
7 years ago
9b0ee53b12
Use segmented moves when moving axis from LCD
7 years ago
442669d23c
Allow UBL to build without a probe
7 years ago
20ebe218c8
Tweaks to VIKI lcd support
7 years ago
09fa34a9e1
Modernize configs
7 years ago
560d366b80
Move VIKI SCK/MOSI pins fix to Conditionals_POST.h
7 years ago
e9bcb9d048
Add 4 new LCD displays
7 years ago
03f4891fb9
Remove legacy ADVANCE feature
7 years ago
546f02c6f4
[2.0.x] Addressing #7896
...
Compiler error, added char c variable
7 years ago
eb96d37da0
Serial double echo fix
...
Fix double character sent when TX buffer size is 0 on mega2560
7 years ago
deeea98d22
LCD filename already concatenated
7 years ago
a058638d11
Merge pull request #7875 from thinkyhead/bf2_fill_eeprom_dat_ff
...
[2.0.x] Update LPC persistent store to initialize eeprom.dat with FF
7 years ago
ae1a18d0a1
LCD filename already concatentated
7 years ago
12aa1b999a
Fix display issue with SD_SORT_ALPHA cached names
7 years ago
9d0e4ea3d5
[2.0.x] Auto-enable DISABLE_REDUCED_ACCURACY_WARNING if HOME_AFTER_DEACTIVATE enabled ( #7879 )
...
* Auto-enable DISABLE_REDUCED_ACCURACY_WARNING if HOME_AFTER_DEACTIVATE enabled
If HOME_AFTER_DEACTIVATE, there is no need to warn on LCD since printer will home prior to starting print. Saves 60 bytes PROGMEM on AVR with U8g panel.
* Reduce lines used
* Reduce lines used
7 years ago
8315a8a716
Apply fixes for DUE
...
Alternative to #7882 . If F_CPU is greater than 1000 it can be evenly divided by 8. Over 10000, 16; over 100000, 32; over 1 million, 64; etc.
7 years ago
4b36a542e0
Merge pull request #7876 from thinkyhead/bf2_hotend_messages
...
[2.0.x] Addressing #7612
7 years ago
12730c1303
[2.0.0] Resolve USE_CONTROLLER_FAN compile errors
...
Add to controllerfan.cpp:
#include "../module/stepper_indirection.h"
#include "../module/temperature.h"
7 years ago
7fb3343bda
[2.0.x] Addressing #7612
...
Change "extruder" to HOTEND in sanity error messages
7 years ago
8998f31ee1
Update LPC persistent store to initialize eeprom.dat with FF
...
This change initialize any data in eeprom.dat beyond the current file size to FF.
That way if eeprom.dat is deleted and created again, it doesn't take the old values or random ones, but rather starts with FF in all positions as a real brand new or erased eeprom.dat
Currently if you delete eeprom.dat and restart the board, the new file is created in the same sector with the same content, since FAT does not actually delete the data, just marks the sector as free. I tested by deleting the file, and then rebooting the board, and checking the file content.
The change can be tested in the same way, deleting, rebooting the board, and then the new content should be all FF.
If an eeprom file already exist with data on it, but smaller than E2END, it will be padded with FF on first access, so it will not have random or old content appended.
7 years ago
2aa22c5a5e
Merge pull request #7874 from thinkyhead/bf2_anet_encoder_pulses
...
[2.0.x] Fixing ANET encoder pulses
7 years ago
f99d1dedae
Fixing #7833
...
Derived from #7873
7 years ago
de84f57a9c
Patch SD file draw bug
7 years ago
ef90b49fff
Remove extra NEWPANEL settings in Conditionals_LCD.h
7 years ago
67a7dd9792
Merge pull request #7866 from thinkyhead/bf2_finally_G33_is_done
...
[2.0.x] Apply G33 updates
7 years ago
b220bc7521
Apply G33 updates
...
Adapted from #7865
7 years ago
9fe7f53216
Misc general spacing cleanup
7 years ago
c0382cd8cd
Add UTF-8 mapper for Slovak language
...
Based on #7862 , #7846 by @rmoravcik
7 years ago
c81843a414
Set TEMP_SENSOR_0 to 1 in CR-10 example config
...
As pointed out in #7692 by @totalitarian
7 years ago
72693a7e87
[2.0.x] Fixed RAMPS FD V1 pins.h file ( #7852 )
...
* test only
test
* Fixed RAMPS FD V1 pins.h file
* Fix typo
7 years ago
aa51a02b8f
LPC1768: fix serial buffer underrun ( #7854 )
...
When the buffer is empty index_write == index_read, but they needed constrained by buffer_mask
7 years ago
46b2773e13
General fixes for LPC1768 ( #7834 )
...
* fixed some include paths
* LPC1768: Fix Serial API
Add missing serial methods used if TX_BUFFER_SIZE is set
Change return value of HalSerial:read to match Arduino API
* LPC1768: add filters to ADC
This is to try and compensate for hardware issue and oversensitivity to noise
* LPC1768: remove the polling section of delayMicroseconds
* LPC1768: lock usb mass storage device while device accesses it.
Currently only applicable to persistent store,
The device always has priority and will unmount the sd card from the host, Windows then tries to automount again so it can look like the explorer window freezes. Linux Mint, by default, just closes the Nemo window.
* Add timeout to make sure if Serial never connects that Marlin still boots
* Remove unneeded ifdef CPU_32_BIT
In general the need for ifdef CPU_32_BIT blocks means that something is missing from the HAL API or a Platform, in this case HAL_TICKS_PER_US was missing from the AVR Platform
* LPC1768: relocate RE-ARM debug_extra_script.py
7 years ago
7258218f89
Fix xon_xoff_state initialization
7 years ago
bf596fb039
Merge pull request #7818 from thinkyhead/bf2_xon_xoff
...
[2.0.x] Add XON/XOFF serial handshaking
7 years ago
ca3c9baf1b
Fix DUAL_X_CARRIAGE manual moves, add T0/T1 menu item
7 years ago
a8b8d4e85e
Add a typedef for MENU_ITEM(function,…) functions
7 years ago
6ea2cc0293
Make prepare_move_to_destination_dualx a proper move function
7 years ago
e472a7569b
Remove extra auto_current_control call
7 years ago
508d764d63
Add serial XON/XOFF handshaking
...
From @ejtagle, originally #7459
7 years ago
af15383578
Add XON/XOFF options to example configs
7 years ago
33c4d45f2f
Merge pull request #7812 from thinkyhead/bf2_fix_resume_print
...
[2.0.x] Fix broken M600 resume_print
7 years ago
a03e70d46c
Fix M600 resume_print
...
Derived from #7811 and #7779
7 years ago
2d41c59320
Tweak some spacing
7 years ago
5ae390e240
Apply NO_MOTION_BEFORE_HOMING to examples
7 years ago
90af1fe5ee
Implement NO_MOTION_BEFORE_HOMING option
7 years ago
965b0ab53e
Spacing adjustments
7 years ago
ac41eb5871
Merge pull request #7722 from tcm0116/2.0.x-warnings
...
Cleanup 2.0.x compiler warnings
7 years ago
ae2173cd52
Synchronize retractions
7 years ago
0cb00f52d9
Cleanup warnings
7 years ago
1beaef0452
fix 3S hang & enable SPLIT
7 years ago
020ce176c4
Fix Servo class compile errors
7 years ago
62054af6eb
2.0 compile issues
7 years ago
bea3ec2724
M355 S0, S1 fixes & faster LCD, SD card
...
fix Travis error
7 years ago
8c622a59cf
Merge pull request #7774 from thinkyhead/bf2_lcd_leveling_status
...
[2.0.x] Show leveling status on character LCD
7 years ago
56c05a7015
Show leveling status on character LCD
7 years ago
2ee4eef25c
Merge pull request #7748 from GMagician/Addressing-#7730
...
[bugfix-2.0.x] Fix compiler error (issue #7730 )
7 years ago
ffed785656
Merge pull request #7768 from thinkyhead/bf2_HAL_STM32F1
...
[2.0.x] HAL for STM32F1
7 years ago
604b804125
Add confirmation step to Init EEPROM
7 years ago
c869dc9745
User script return-to-status option
7 years ago
e9acb63290
STM32F1 HAL
...
Adding files for STM32F1 HAL based on libmaple/stm32duino core.
Current persistent_store uses cardreader changes to be sent in separate
commit, but could be changed to use i2c eeprom.
7 years ago
c2b1d51f16
HAL whitespace and style cleanup
7 years ago
c272f2c84e
Cleanup pins spacing
7 years ago
dff2904c0f
Marlin code whitespace cleanup
7 years ago
599f2ad983
Define pin accessors more like <Arduino.h>
7 years ago
358656acc3
Tweak HAL_adc_start_conversion
7 years ago
0cb4d25431
Tweaks to Servo classes
7 years ago
10c1b442ca
Fixes for Anet10 and gt2560
...
Fixes for 2 "... not declared in this scope" compiler errors.
7 years ago
5a3a53379f
Update pins for GT2560_Rev_A_Plus
...
For PR #7738
7 years ago
fdf1b8a7b8
Fix sanity check for LCD_FOR_MELZI
...
Comes from #7760
7 years ago
b93a55e15f
Fix ST7920_DELAY_2 potentially being unset
...
Comes from #7760
7 years ago
ce1638e32f
Add Babystep Z graphic overlay
...
See PR #7593
7 years ago
49c693c85b
Tweak to serial macros
7 years ago
46709ed7e0
More featureful CR-10 configurations
...
See #7725
7 years ago
2b112143fa
Update Sanguinololu config version
7 years ago
7cd5eb6d42
Update LEVEL_BED_CORNERS config option
7 years ago
981a610f75
Disable BABYSTEP_XY, add to SDSORT comment
7 years ago
4c5be9bb05
Fix a PARKING_EXTRUDER comment
7 years ago
494b0eba2d
Config spacing fix
7 years ago
2281154025
Increase BABYSTEP_MULTIPLICATOR to 100
7 years ago
92dbf5f148
Fix babystep edit label, allowing translation
7 years ago
37eb6d1732
Babystepping code tweak
7 years ago
7a29f802d0
Fix ENCODER_PULSES_PER_STEP for G3D_PANEL
7 years ago
5972251b17
No need for unused LCD_PINS_Dn
7 years ago
c508e9adec
Fix compiler error
...
Added missing include file,
called 'leveling_is_active()' with no prototipe defined.
7 years ago
c4e4a0688c
Fix bug in SD Autostart
...
As pointed out by @marcio-ao in #7638
7 years ago
6d5fcac54a
G33 changes from 1.1.x
7 years ago
f58ba3a64e
Improve AVR arch detection
...
Replace ARDUINO_ARCH_AVR with __AVR__ to better detect architecture for non-Arduino dev environments. Resolves compile failure in PIO for 8-bit Teensduino targets
More info:
https://forum.pjrc.com/threads/33234-Using-Teensyduino-Selecting-Teensy-3-2-3-1-board-has-incorrect-platform-define
http://www.atmel.com/webdoc/avrlibcreferencemanual/using_tools_1using_avr_gcc_mach_opt.html
7 years ago
71d63fcafb
Apply LCD changes from 1.1.x
...
Changes from #7720
7 years ago
1587962547
Combine G-code files into fewer units
...
Addressing #7707
7 years ago
bfd1e75c04
Patch for caselight + lcd compile issues
7 years ago
ff1f211eb4
Merge pull request #7695 from tcm0116/move_framework
...
Move LPC1768 framework out of Marlin source folder
7 years ago
ddbd4b73e0
Move LPC1768 framework out of Marlin source folder
7 years ago
00b1b33816
Fix compiler warning
7 years ago
f37ed314e0
Friendly layout for Arduino IDE
7 years ago
06a02dd200
Workaround for SCK/MOSI pins on VIKI
7 years ago
f9ef446fb5
Clean up after refactor
7 years ago
64dfb46461
Move z_endstop_adj to Endstops
7 years ago
2e20c53c9d
Move endstop debug to Endstops
7 years ago
Colten Edwards