Eduardo José Tagle
57a899a412
[2.0.x] 6th-order jerk-controlled motion planning in real-time for AVR ( #10373 )
7 years ago
Bob-the-Kuhn
85014cd132
[2.0.x] LPC1768 - automatic selection of upload disk ( #10374 )
7 years ago
Scott Lahteine
8669dba5e6
Merge pull request #10172 from noingwhat/2.0.x-Filament-Change-Acceleration
...
[2.0.x] Filament load/unload add acceleration for Bowden
7 years ago
Scott Lahteine
472ab0cc24
Tweak RAMPS SDSS pins
7 years ago
LichtiMC
b94c8defee
Provide additional information about SMART-RAMPS board ( #10353 )
7 years ago
Scott Lahteine
6f8e228880
Add RESET_PIN to pins_RAMPS_SMART.h
7 years ago
Sean
2d9b0a66fe
Add Filament Change accelerations
7 years ago
Scott Lahteine
71d3523254
Add Filament Change accelerations to example configs
7 years ago
Scott Lahteine
8b8ad14178
Add Z_PROBE_LOW_POINT to prevent damage
7 years ago
Scott Lahteine
82dafbba33
Add Z_PROBE_LOW_POINT to example configs
7 years ago
Roxy-3D
a731a723e8
Better i3-2020 Z_PROBE_OFFSET_FROM_EXTRUDER
7 years ago
Roxy-3D
26cc12eaa4
Resolve corruption of Max7219 Debug LED Matrix
7 years ago
Scott Lahteine
dca69efc11
Update Bed PID comments
7 years ago
Scott Lahteine
56486c5c0e
Apply const to manage_inactivity
7 years ago
Scott Lahteine
a6485456df
Fix LIGHTWEIGHT_UI with UBL
...
See https://github.com/MarlinFirmware/Marlin/issues/10317#issuecomment-379100702
7 years ago
Scott Lahteine
e02fc4f1d6
Better RESTORE_LEVELING_AFTER_G28 sanity-check
...
As suggested by @GMagician
7 years ago
Scott Lahteine
44a697ab04
Set STM32F1 TEMP_TIMER_FREQUENCY to 1K
...
Responding to https://github.com/MarlinFirmware/Marlin/pull/8833#issuecomment-379426803
7 years ago
Scott Lahteine
cec6e19099
Add RepRapPro Huxley configuration
...
Based on #10343 by @indazoo
7 years ago
Scott Lahteine
9ff4e9e1e6
Patch _IS_HW_SPI so defined() works
7 years ago
Scott Lahteine
cea398849e
Tweak to gcode_line_error/return
7 years ago
etagle
a29adde5c0
Implement BEZIER_JERK_CONTROL
...
Enable 6th-order jerk-controlled motion planning in real-time.
Only for 32bit MCUs. (AVR simply does not have enough processing power for this!)
7 years ago
Scott Lahteine
5932df7ea1
Add BEZIER_JERK_CONTROL to example configs
7 years ago
Lenbok
0e8242180d
Chamber temperature monitoring and auto fan control.
...
This is an initial cut for feedback, updated for 2.0.x.
Chamber temperature is currently reported along with hot end and bed
temperatures to serial. The format is just like that used for hot end
and bed temperatures, but using 'C' prefix. As there is no heater,
target is always 0. Is this appropriate, is there a better way to report
chamber temperatures?
Chamber temperatures are not reported on the LCD in any way.
When auto chamber fan is enabled, it currently just uses the same
temperature threshold as the other auto controlled fans.
As the chamber temperature is not connected to any heater, it doesn't
undergo mintemp/maxtemp monitoring. This would need to change in the
future if chamber heating became a feature.
7 years ago
Scott Lahteine
5b3bda1c16
Add Chamber Temp options to example configs
7 years ago
Bob-the-Kuhn
acda4ecb20
Fix DUE Trinamic SW/HW SPI sanity check ( #10336 )
7 years ago
Bob-the-Kuhn
ab715c70d1
TMC SPI sanity-check and pins debugging ( #10324 )
7 years ago
Scott Lahteine
4dc7e64789
Update Slovak language
...
Based on #10313 by @rmoravcik
7 years ago
Scott Lahteine
0dccf9ea6a
Merge pull request #10318 from marcio-ao/pr-einsy-retro-tmc2130
...
[2.0.x] Fix TMC2130 DIAG1 active high, Einsy Retro
7 years ago
Marcio Teixeira
2efc072fdb
Clear progress bar on completion ( #10333 )
...
Fix #10330
7 years ago
GMagician
6ce060cfe0
[2.0.x] Update language_it.h ( #10322 )
...
Updated to #10296
7 years ago
Marcio Teixeira
9356cf648f
Added support for Einsy Retro
...
http://reprap.org/wiki/EinsyRetro
7 years ago
Marcio Teixeira
75037493fa
Default active low for TMC2130 DIAG1 ( #10294 )
...
- Added sanity check to inform users to set the endstop to inverting
when using SENSORLESS_HOMING
7 years ago
Scott Lahteine
e8e60263c8
Scale feedrate (mm/s to deg/s) for SCARA
7 years ago
Scott Lahteine
051303ad42
Russian language updates
...
From #10311 by @anton-piliugin
7 years ago
Sean
2fa0a73c2c
Implement filament change continuous purge
7 years ago
Scott Lahteine
d133ad61f3
Add continuous purge to example configs
7 years ago
Scott Lahteine
4b25543633
Backtrace formatting cleanup
7 years ago
Bob-the-Kuhn
902c885782
Switch to TMC2130 compatible hardware SPI & misc ( #10299 )
7 years ago
Scott Lahteine
1c36606886
Fix MSG_HEATING_FAILED_LCD_BED macro evaluation
7 years ago
Scott Lahteine
fe91514395
MBL should add z_offset regardless of fade ( #10308 )
7 years ago
Marcio Teixeira
8bc93c6f2b
Improve heating/cooling LCD messages ( #10293 )
7 years ago
GMagician
21a47b50f4
Additional tool-change fixes ( #10304 )
...
Followup to #10257
7 years ago
Scott Lahteine
f68b4265a6
Fix a probe pin definition
7 years ago
Yunhui Fu
a019eebdd6
support utf8 unicode for test language ( #10220 )
7 years ago
Scott Lahteine
656219d867
Add configs for Creality CR-8
7 years ago
Karl Andersson
7cbbc2af7a
[2.0.x] Optional heater signal inversion ( #10260 )
7 years ago
Marcio Teixeira
4d1a61335c
[2.0.x] Fixed Makefile for Marlin 2.0 ( #10255 ) ( #10281 )
...
* Fixed Makefile for Marlin 2.0 (#10255 )
- Makefile now supports the new Marlin 2.0 directory hierarchy.
- RELOC_WORKAROUND is now automatically enabled based on avr-gcc version.
* Makefile support for U8glib and TMC2130Stepper
- Updated paths for oliver's U8glib 1.19.1
- Added option for teemuatlut's TMC2130Stepper 2.2.1
7 years ago
Scott Lahteine
241996d5d6
Merge pull request #10257 from thinkyhead/bf2_tool_change_debug
7 years ago
Scott Lahteine
4c79dc1093
Fix a Serial+EEPROM compile error
...
Fixes #10278
7 years ago
Scott Lahteine
93305a2d5e
Fix some spellings
7 years ago
Scott Lahteine
adcb87f0db
Z Endstop Servo => Z Probe Servo
7 years ago
Scott Lahteine
4f0eafce8f
Add more AVR boards to Makefile
7 years ago
Scott Lahteine
4a23069de9
Fix Ender 4 / CR-8 compilation
...
- Assign 243 (like EFB) as Ender-4/CR-8 board ID
- Add to `Makefile`
- Add to `pins.h`
7 years ago
Scott Lahteine
02f0f95d40
Handle disabled HYBRID_THRESHOLD in EEPROM ( #10275 )
7 years ago
Scott Lahteine
9ec2c03c5b
Fix likely error in retract/recover
...
Addressing #10200
7 years ago
Scott Lahteine
49f384a2ab
Note about MKS_MINI_12864 in sanitycheck
7 years ago
Scott Lahteine
2672120a97
Do a small raise for all move-back
7 years ago
Scott Lahteine
5acccbacc1
Simplified leveling-based tool change
7 years ago
Scott Lahteine
1a75165f35
For set_z_fade_height use set_bed_leveling_enabled
7 years ago
Scott Lahteine
d1734a089a
Split up tool_change for some setups
7 years ago
Scott Lahteine
a9f94f260a
Some RADDS pin updates
7 years ago
Scott Lahteine
31df43212c
Use lcd_printPGM_utf in more places
...
Fix #10256
7 years ago
Scott Lahteine
7d8a46519f
Output ABC for delta stepper counts
7 years ago
Scott Lahteine
6098efcc59
Use float62 for LCD edit of Z Fade
7 years ago
Scott Lahteine
f6d13e2295
Allow Z_SAFE_HOMING sanity checks to handle floats
7 years ago
Scott Lahteine
889fd5f71f
Backtrace minor cleanup
7 years ago
Scott Lahteine
53f0c7522a
Symmetrical FWRETRACT Z Hop
...
Do the Z lift normally before setting Z back to its prior value. But do the Z lower using spoofing. This should produce proper symmetrical movement.
7 years ago
Scott Lahteine
ac7e97f4fe
Change order of inactive stepper disable/enable
...
This ensures that steppers that share an enable pin will only be disabled for a miniscule time.
7 years ago
Scott Lahteine
55e9b85ad6
Clear the "Wait for user" message set by M0/M1
...
See https://github.com/MarlinFirmware/Marlin/issues/10246#issuecomment-377146936
7 years ago
Scott Lahteine
b6a55f0891
Temporary workaround for tool-change compile error
...
Pending a more complete solution to tool-change Z deviation.
7 years ago
Scott Lahteine
b852781eba
Fix BLTOUCH compile error
...
Followup to #10250
7 years ago
AnHardt
c1f58a238d
No delay in sensorless quick homing ( #10254 )
7 years ago
Scott Lahteine
1be955e52a
Alert users about low Z jerk values
7 years ago
Scott Lahteine
9e4c037cef
Wait before turning off PRINTER_EVENT_LEDS at print end ( #10248 )
7 years ago
Scott Lahteine
8b7381b626
Clear sensorless homing in home_delta after first move-to-top
7 years ago
Scott Lahteine
dbe2b6f7b0
Do moves towards endstops differently in do_homing_move
7 years ago
Scott Lahteine
d573a2cada
Fix pins_RAMPS.h for 32-bit platforms
...
Followup to 436e5b7
7 years ago
Scott Lahteine
f04be05a14
"G28 Z Forbidden" => "Home XY first"
...
Some languages will need to be updated for proper phrasing
7 years ago
Scott Lahteine
a97624dd81
Allow pinsDebug "Analog in" long int
7 years ago
Scott Lahteine
7b8bb2519e
Fix gcode_line_error call
...
Followup to 3007eee
7 years ago
Scott Lahteine
aa20b3ef7c
Fix linear/3-point manual leveling buffer overrun
...
Fixes #10137
7 years ago
Alexey Shvetsov
cbdc78ec0f
Fix STM32 compilation with PlatformIO ( #10245 )
7 years ago
Scott Lahteine
9d2ea5d64b
Undo German changes
...
See 941e9bd329 (commitcomment-28262166)
7 years ago
Scott Lahteine
2bc7f416ee
Fix missing comma in tmc_sgt
...
Fixes #10209
7 years ago
Scott Lahteine
38378cd0e8
M218 with DELTA needs planner.h
...
Fix #10232
7 years ago
Scott Lahteine
3007eee22e
Require a checksum when writing to SD
...
From #10204 by @adriancuzman
7 years ago
Bob-the-Kuhn
9656a82609
Fix G53/CNC_COORDINATE_SYSTEMS compilation, Travis testing ( #10227 )
7 years ago
Eduardo José Tagle
749f19e502
[2.0.x] Move backtrace to a shared location ( #10237 )
...
- And implement the `backtrace()` function call
7 years ago
xC0000005
7dc256432f
Restore STM32F1 series to working order. ( #10229 )
...
The `_O2` attribute is no longer needed on the malyanlcd function, and the macros have broken timer numbers - reset this to a function to return the right device. Also fix the bit order cast in SPI.
7 years ago
Rob Power
d1f14202a9
[2.0.x] NANODLP_Z_SYNC requires linear axes ( #10240 )
7 years ago
Scott Lahteine
b287560258
Fix say_M603
7 years ago
Scott Lahteine
436e5b7ea3
Apply spacing in pins files
7 years ago
Scott Lahteine
4d533b9baa
Update bq Hephestos 2 probe offset
...
From #10234 by @thopiekar
7 years ago
Bob-the-Kuhn
78df07ac71
Merge pull request #10221 from ejtagle/bugfix-2.0.x
...
[2.0.x] DUE: Several fixes to the backtracker
7 years ago
etagle
8934a2c49b
Added some missing Thumb instructions to the traceback follower, so now it is able to traceback through switch() statements
7 years ago
etagle
328edea03a
Several fixes to the backtracer. Tested ant it works
7 years ago
Scott Lahteine
aa6dacbbdf
German update
...
Based on #10216
7 years ago
Yunhui Fu
8322a79bb9
update the UTF-8 C strings for Chinsee languages, for Simplified and Traditional Chinese ( #10211 )
7 years ago
ejtagle
9a24c0ae3f
Tons of fixes to the backtracker code, and also added an extra backtracker that does not require unwind tables to work and it is used if unwind tables are absent
7 years ago
Scott Lahteine
a891af2f7a
Enforce minimum TMC2130 / TMC2208 libs
7 years ago
Bob-the-Kuhn
75b381cd28
Merge pull request #10203 from Bob-the-Kuhn/sanity-check-fix
...
[2.0.x] Fix TMC sanity checks that always fail
7 years ago
Bob-the-Kuhn
433e984d1f
move comment to fix compile error
7 years ago
Bob-the-Kuhn
f7857ac8a8
Merge pull request #10185 from ejtagle/bugfix-2.0.x
...
[2.0.x] DUE debugging: Solve WDT startup delay, add traceback & crash report uses programming port baud rate
7 years ago
Bob-the-Kuhn
b756a15aba
another needs to be deleted
7 years ago
Bob-the-Kuhn
50c81ebe0d
remove check that always fails
7 years ago
Scott Lahteine
3ac135cef3
Enforce minimum TMC2130 / TMC2208 libs
7 years ago
Bob-the-Kuhn
8870f9b1da
Fix M503 helper functions following TMC updates ( #10197 )
7 years ago
Scott Lahteine
bb7236a750
Z correction on tool-change for all HAS_MESH ( #10199 )
7 years ago
Bob-the-Kuhn
509227fd80
change to mode 0
7 years ago
etagle
c3b23974bd
Added detection of case when no unwind tables are available
7 years ago
Scott Lahteine
ea1a83ce41
Use pgm_read_ptr for tables of pointers
7 years ago
Scott Lahteine
9da0797e29
Fix EEPROM size of tmc_hybrid_threshold
...
Followup to #10102
7 years ago
teemuatlut
daf643e1ce
[2.0.x] TMC: Match axis label order ( #10188 )
7 years ago
Roxy-3D
1628a9e864
make data declarations consistent
7 years ago
etagle
b210bdf032
Now the Crash reporter uses the configured BAUDRATE to send the report through the Programming port. And also shows the traceback of functions as discussed. For that latest feature to work, you need to compile the project with -funwind-tables and -mpoke-function-name compiler flags
7 years ago
etagle
c5730cf711
As Bob-The-Khun suggested, resetting the USB peripheral solves the huge startup delays that happen when a WDT reset happens and we are connected through the native port
7 years ago
Scott Lahteine
1cb810ff1c
[2.0.x] Automatically reset stepper timeout ( #10179 )
...
* Automatically reset stepper timeout in manage_inactivity
Any code that adds moves to the planner can skip resetting the stepper timeout. We can let `idle` / `manage_inactivity` reset the timer whenever it detects any moves in the planner.
* blocks_queued => has_blocks_queued
7 years ago
Eduardo José Tagle
97e8a6ebd9
Various fixes for DUE... ( #10152 )
...
- Watchdog reset during SD Card initialization.
- Move `DebugMonitor` to `DebugMonitor_Due.cpp`.
- Since the watchdog is enabled on boot do extra resets during init.
- Have `thermalManager` do watchdog reset before its ISR starts to prevent reset.
- Ensure that timers are stopped before reprogramming them to address tone issues.
- Improve SAM3XE reset when reflashed through the native port.
7 years ago
Roxy-3D
c3c264978f
correct truncated comment
7 years ago
Scott Lahteine
9fd1016bb1
Trust the bootloader to clear globals
7 years ago
Scott Lahteine
045ee28c50
Tweaks to M915
7 years ago
Scott Lahteine
987597532c
For MK2_MULTIPLEXER undef DISABLE_INACTIVE_EXTRUDER
...
Fix #10098
7 years ago
Scott Lahteine
ff304d3767
Allow G53 to go back to native space
7 years ago
Scott Lahteine
bc45fb6b13
Tweak use of move_z_after_probing
7 years ago
Scott Lahteine
c352954882
Allow no raise after run_z_probe in probe_pt
7 years ago
Scott Lahteine
ae39fbd646
Also suppress keepalive with suspend_auto_report
7 years ago
Scott Lahteine
8dfaf1539e
Merge pull request #10102 from thinkyhead/bf2_eeprom_M913
...
[2.0.x] More complete Trinamic driver options
7 years ago
AnHardt
837ac2fdbd
[2.0.x] Fix_Autotune_THERMAL_PROTECTION_BED_off ( #10166 )
...
- Fix Autotune Thermal Protection
- Make 2 constants in autotune configurable
7 years ago
Bob-the-Kuhn
785dbfc72d
[2.0.x] FASTIO consistency ( #10164 )
7 years ago
Bob-the-Kuhn
7308ef7809
Add conditional, give DUE SPI a unique name, fix compiler warnings ( #10168 )
7 years ago
teemuatlut
b5b39af531
[2.0.x] TMC: Fix CURRENT_STEP_DOWN ( #10170 )
7 years ago
Scott Lahteine
a5c6d3c7b8
Prevent null pointer crash in Endstops::update
...
Thanks to Evgeny Kotsuba!
7 years ago
Scott Lahteine
a46bac3100
Add 'I' parameter to M906/M913/M914; 'T' to M906/M913
7 years ago
Scott Lahteine
cfc13ed7f3
Quiet M906/M913/M914 with axes. Patch for DISTINCT_E_FACTORS.
7 years ago
Scott Lahteine
c95450016b
Improve Trinamic support in the EEPROM
7 years ago
Scott Lahteine
48d7036874
Consolidate smart stepper driver initialization
7 years ago
Bob-the-Kuhn
53362b81cc
Tone fixes/changes ( #10151 )
7 years ago
Scott Lahteine
dd2949922b
Consolidate 3-point leveling point options
7 years ago
Scott Lahteine
1d22609473
MIN_PROBE_EDGE replaces DELTA_PROBEABLE_RADIUS
7 years ago
Scott Lahteine
eaefc1e410
Add CorePQ support for BABYSTEPPING ( #10155 )
7 years ago
Scott Lahteine
72281c4ff9
Turn power off in `kill` instead of setting PS_ON to input
7 years ago
Scott Lahteine
9d99360912
Fix matrix.debug output
7 years ago
Eduardo José Tagle
bbfbf90797
Fix for DUE - no host support on native USB if SD card not enabled ( #10148 )
7 years ago
Scott Lahteine
772810fb24
Followup to PORTVAR patch
7 years ago
Scott Lahteine
978f342392
Reduce some tmc_util strings
7 years ago
Scott Lahteine
fbdc5ad962
Prevent lcd_update stack overflow on SD Card change
7 years ago
Scott Lahteine
c0d694d5d3
Squash UBL postscript comment
7 years ago
Scott Lahteine
93af8aa157
Fix home_delta for SENSORLESS_HOMING ( #10145 )
7 years ago
Scott Lahteine
0543362b34
Don't init the tone timer if no BEEPER_PIN
7 years ago
Scott Lahteine
c6ff39cc14
Spacing cleanup
7 years ago
Scott Lahteine
9e9e29ddf8
Einsy: Regular endstops and BLTOUCH pins
...
Based on #10131
7 years ago
Bob-the-Kuhn
c79b53d406
Merge pull request #10140 from Bob-the-Kuhn/DUE-full-speed
...
[2.0.x] DUE - add full speed USB native port option
7 years ago
Bob-the-Kuhn
7f1afbfd60
can't type
7 years ago
Bob-the-Kuhn
23760d6c14
add full speed option
7 years ago
Bob-the-Kuhn
cbcd1ed42d
full speed
7 years ago
Scott Lahteine
6689884910
Easier override of ST7920 LCD timing
7 years ago
Scott Lahteine
d603e655d3
Fix SWITCHING_EXTRUDER manual movement
7 years ago
Scott Lahteine
5f77816772
Reduce size of "only one" sanity checks
7 years ago
Scott Lahteine
8922b56b58
Fix some spelingz
7 years ago
Scott Lahteine
a6feb58837
Delta support for multiple hotends with offsets ( #10118 )
7 years ago
TheSFReader
2e43438e0c
Add C parameter to M27 to include the long filename
...
In answer to #10001
Add an option to retrieve the currently open file name (long filename if possible).
7 years ago
Scott Lahteine
2168d6ac25
Allow NULL prepend in lsDive
7 years ago
Scott Lahteine
1e946d681d
Update Marlin for newest TMC libraries
...
- TMC2130Stepper v2.2.0
- TMC2208Stepper v0.0.4
7 years ago
shaktee
63fc4a8521
BIBO2 default update and Cyclops config ( #10108 )
7 years ago
etagle
404fc94705
DUE USB CDC: Do not send any character if no program on the PC is listening to them. This avoids Marlin waiting until the user actually opens a program that is able to consume the output of Marlin
7 years ago
Scott Lahteine
4aebe3d82e
Pretty up EEPROM port args
7 years ago
Scott Lahteine
51bf3c9503
Fix E direction for MK2_MULTIPLEXER with LIN_ADVANCE
7 years ago
teemuatlut
e6dcfa64b0
Cast SERIAL_CHAR to void in M122 ( #10086 )
7 years ago
Marcio Teixeira
c24dbcbfe1
When STATUS_EXPIRE_SECONDS is 0, hide the position. ( #10081 )
...
Some users may prefer to hide the position updates on the `LIGHTWEIGHT_UI` altogether. This leads to an even less cluttered display (it also saves on SPI traffic and one byte of RAM).
7 years ago
Studiodyne
e7a61de8af
[2.0] FWRetract Reset (Best way) ( #10083 )
7 years ago
Scott Lahteine
f894209de2
Merge pull request #10093 from thinkyhead/bf2_trinamic_config
...
[2.0.x] Clean up Trinamic config options, sanity check
7 years ago
Scott Lahteine
f1327fd5f9
Use lcd_goto_previous_menu_no_defer more
7 years ago
Scott Lahteine
e7570f3195
Improve TMC config organization, naming
7 years ago
Scott Lahteine
374ea49be9
Revert marlinAnalogInputToDigitalPin
7 years ago
Scott Lahteine
34f656decd
Add TMC2208 include in tmc_util.h
7 years ago
Scott Lahteine
07cf2cd9c4
Fix sensorless_homing_per_axis compile warning
7 years ago
Scott Lahteine
b858c638ad
Fix compiler warning for HAL_ANALOG_SELECT
7 years ago
Bob-the-Kuhn
c4467da53a
Merge pull request #10063 from ejtagle/bugfix-2.0.x
...
[2.0.x] DUE - add programming capability to native port
7 years ago
Scott Lahteine
65ce0303f8
Fix MKS_12864_OLED blank issue
...
Fixes #10071
7 years ago
Scott Lahteine
36452b4d6e
Fix filename HAL/DUE/servotimers.h => ServoTimers.h
7 years ago
Scott Lahteine
14c03cb6f4
[2.0.x] Make MIN_PROBE_EDGE a general option (for electronic probes) ( #10069 )
...
Some probes don't work near the edges of the bed. This change promotes MIN_PROBE_EDGE to a general setting that applies to all probing functions.
7 years ago
Scott Lahteine
5dec828abc
Add MKS_12864OLED to lcd_implementation_init
...
Followup to #7914
7 years ago
Scott Lahteine
468f34104b
Patch do_blocking_move_to so 'destination' can be used
7 years ago
Scott Lahteine
5b45aab262
M218: report with no parameters
7 years ago
Scott Lahteine
18de11c1ea
Followup to auto-assign of dual axis CS pins
7 years ago
ejtagle
703c8ac0ef
Added Arduino-compatible kludge to the (ATMEL supplied) SAM3X USB stack we are now using so the Native port is also usable as a programming port on Arduino DUE and derived designs
7 years ago
Scott Lahteine
28f1276286
[2.0.x] Add Z_AFTER_PROBING option ( #10058 )
...
Some "fix-mounted" probes need manual stowing. And after probing some may prefer to raise or lower the nozzle. This restores an old option but tailors it to allow raise or lower as preferred.
7 years ago
Scott Lahteine
dd19e74476
Cleanup trailing whitespace
...
@Bob-the-Kuhn — Please set your git options to remove trailing whitespace on commit.
7 years ago
Scott Lahteine
d0ac0151b6
Fix typo in ubl.prepare_segmented_line_to
7 years ago
Scott Lahteine
d385b9aac7
Auto-assign CS pins for X2, Y2, Z2 ( #10057 )
...
Fixes #9211
7 years ago
Scott Lahteine
bae1cb859c
Patch flush_and_request_resend for 1.1.x parity
7 years ago
Scott Lahteine
51ebdf3b7d
Finish scroll_screen with menu direction/multiplier
...
Fixes #10041
7 years ago
Bob-the-Kuhn
0d8c15c01f
restore PR 9661 files & V1 fix
7 years ago
Scott Lahteine
751785fc97
Followup to recent patches
...
- `M666` is static, not inline
- Disambiguate some stepper macros
7 years ago
Scott Lahteine
a0211f5d6c
Disambiguate else in stepper_indirection.h
7 years ago
Scott Lahteine
f003173752
Fixup M666
...
Followup to d6df032
7 years ago
Bob-the-Kuhn
bf59a4a6df
Revert "[2.0.x] DUE compatibility with shared SPI LCDs, USB mass storage, add pin defs & update examples\MakerParts\Configuration.h"
7 years ago
Sebastianv650
fd1d590726
[2.0.x] Silence M204 ( #10037 )
...
`M204` is often used by slicers to set acceleration depending on perimeter, infill, etc., so Marlin's answers are flooding the serial windows. Silence `M204` according to the philosophy that setter commands should only send a reply if no parameter is given.
7 years ago
Scott Lahteine
f10c87b442
Update Endstops class for 1.1.x parity
7 years ago
Scott Lahteine
d6df0322c2
Update M666 for XYZ dual endstops
7 years ago
Scott Lahteine
fbc41c0e98
Update Marlin G-code summary
7 years ago
Scott Lahteine
239902f861
Fix E2END and add EEPROM to Smart RAMPS
...
Reference #9983
7 years ago
Scott Lahteine
ddce486360
Merge pull request #10032 from thinkyhead/bf2_unknown_z_no_raise
...
[2.0.x] Add UNKNOWN_Z_NO_RAISE to prevent Z grinding
7 years ago
Scott Lahteine
79e6d890d5
Add UNKNOWN_Z_NO_RAISE to example configs
7 years ago
Scott Lahteine
419d12ca1b
Add UNKNOWN_Z_NO_RAISE option
...
With this option enabled, Z won't ever be raised until after `G28` has been completed, and it won't raise if Z becomes unknown. This is good for machines whose beds fall when Z is powered off.
7 years ago
Scott Lahteine
3b4c89e4b5
Move do_probe_raise closer to set_probe_deployed
...
…and limit the raise to Z_MAX_POS
7 years ago
Scott Lahteine
2908e76151
Fix position_is_reachable_by_probe typo, add comment
...
Fix #10029
7 years ago
Roxy-3D
26dc594ebb
prevent steppers from turning off during manual probes
7 years ago
Bob-the-Kuhn
d8eadf3796
fix ubl_G29.cpp Travis error
7 years ago
Bob-the-Kuhn
914bb80bde
removed SDSS init
...
added device & comm drivers for shared SPI LCDs
mistyped some updates in ultralcd_impl_DOGM.h
remove unwanted changes in onfiguration.h
still can't type
Update HAL_LCD_class_defines.h
include USB mass storage & misc
7 years ago
Scott Lahteine
6d9ea7e184
Fix position_is_reachable_by_probe typo, add comment
...
Fix #10029
7 years ago
Roxy-3D
646dd5554c
prevent steppers from turning off during manual probes
7 years ago
Scott Lahteine
161ff9ff35
Fix UPDATE_ENDSTOP for CorePQ compatibility
...
Fixes #9939
7 years ago
Scott Lahteine
49ca67202f
Patch configuration_store for extra serial port
...
Fix #9948
7 years ago
Scott Lahteine
cc59ac4603
Fix _tmc_say_axis string address
...
Fixes #10003
7 years ago
Scott Lahteine
16a8edc5f0
Add more delay before pulse off in Linear Advance ISR
...
A capital idea from https://github.com/MarlinFirmware/Marlin/pull/9914#issuecomment-371614153
7 years ago
Scott Lahteine
dfd5d2fe75
Have position_is_reachable_by_probe use the whole bed ( #10020 )
...
Previously `position_is_reachable_by_probe` was limited to the area specified for `G29` mesh leveling (even if leveling was disabled). This change will properly consider the entire bed area so that `G30` and other non-leveling probing may take place.
7 years ago
Bob-the-Kuhn
67a17446f2
Fix DUE incompatible enum type specification ( #10017 )
7 years ago
Bob-the-Kuhn
3c58ca181c
[2.0.x] Correct step pulse width on LPC1768, DUE & Teensy35_36 ( #10016 )
7 years ago
Scott Lahteine
e297748b22
Apply const, safe_delay in servo.*
7 years ago
Scott Lahteine
3c2bfa5e53
Update powersupply_on in power_on/off ( #10015 )
...
Fix #10004
7 years ago
Scott Lahteine
42608b1925
Init old_red to 127 to ensure initial change
...
Fix #10012
7 years ago
Scott Lahteine
317673fec3
Init watchdog last in setup()
7 years ago
Scott Lahteine
8d32fd997f
Wrap NORM_E_DIR/REV_E_DIR macros in do{}while(0)
7 years ago
Scott Lahteine
1913c37a91
Tweak to manual move eindex arg
7 years ago
Scott Lahteine
98d48fc731
Followup to HAL_timer_restrain
...
Followup to #9985
7 years ago
Scott Lahteine
03e3011332
Fix compile error with MAX_MESSAGE_LENGTH
...
Fix #9988
7 years ago
Bob-the-Kuhn
6b4a928145
2uS default step pulse ( #9989 )
7 years ago
Scott Lahteine
ca577c1638
Fix up various spacing, comments, and typos
7 years ago
Scott Lahteine
d45f19d385
Remove Unicode from var name
7 years ago
Scott Lahteine
224688cc3b
Fix for unicode-ignorant gcc preprocessor
7 years ago
Chris Pepper
a1a88ebabc
HAL function to ensure min stepper interrupt interval ( #9985 )
7 years ago
Scott Lahteine
be0e100fed
Fix sd subdirectory encoder position
...
Followup to 7e386c7
7 years ago
Bob-the-Kuhn
04dedc7ed8
always completely initialize display ( #9981 )
7 years ago
Scott Lahteine
0149680f54
Fix compile error with char LCD
7 years ago
Scott Lahteine
9515e5aefb
Fix LA_active_extruder (static)
7 years ago
Scott Lahteine
e5ec793f7e
Wrap stepper indirection macros
7 years ago
Sebastianv650
5b85464791
Fix for LA ( #9964 )
...
Missed in the original LA 1.5 PR: eISR has to use a local copy of
current_block->use_advance_lead because it might still run wenn the last
block has been set to NULL.
7 years ago
Scott Lahteine
7e386c7e98
Fix encoder position for sddirectory
7 years ago
Scott Lahteine
1d604be671
Suspend auto-report during UBL map output
7 years ago
Scott Lahteine
eb212ae073
Add suspend_auto_report flag to suppress auto-report
7 years ago
Scott Lahteine
ffbf63e6af
Add HAS_TEMP_SENSOR conditional
7 years ago
Scott Lahteine
94f5204629
Move AUTO_REPORT_SD_STATUS to SDSUPPORT block
7 years ago
Scott Lahteine
22a017a856
Rebuild SD file sort array on Stop SD Print ( #9976 )
...
Thanks Chuck Hellebuyck.
7 years ago
Scott Lahteine
920d92aa46
Merge pull request #9974 from thinkyhead/bf2_tmc_util_progmem
...
[2.0.x] Move tmc_util.* extended_axis_codes to PROGMEM
7 years ago
Scott Lahteine
b198b49d15
Followup to AUTO_REPORT_SD_STATUS
...
Followup to #9832
7 years ago
Scott Lahteine
2057177184
Make enums into implicit char
7 years ago
Scott Lahteine
e28e3bb532
Move extended_axis_codes to PROGMEM
7 years ago
Scott Lahteine
ca0def766e
LIN_ADVANCE single stepper optimization
7 years ago
Scott Lahteine
8291ae34f2
Support duplication mode in LIN_ADVANCE
7 years ago
Scott Lahteine
b08ec22fe1
Show E0-E4 in monitor_tmc_driver output ( #9969 )
...
Fix #9966
7 years ago
Marcio Teixeira
fd883c909a
Improvements to Lightweight ST7920 status screen. ( #9952 )
...
- Show units on lightweight status screen.
- Fixed progress bar so it works with M73
7 years ago
Scott Lahteine
0dd1c4458d
Put more code between pulse start and stop ( #9959 )
7 years ago
Scott Lahteine
f9cafc4001
Fix menu highlight glitch, tweak scrolling code ( #9957 )
7 years ago
Scott Lahteine
bf9fc8ac0e
M851 - report only without parameters
7 years ago
Scott Lahteine
eb867817b5
Prevent filament runout false positives ( #9946 )
7 years ago
Scott Lahteine
36262a0479
Use static classes for job timers ( #9938 )
7 years ago
Scott Lahteine
930720bbbb
Fix broken reverse planner ( #9943 )
...
From #9914 by @Sebastianv650
7 years ago
Bob-the-Kuhn
025118da3e
Init print_job_timer in setup() instead of "early" ( #9937 )
7 years ago
Scott Lahteine
beeed580b8
Implement digipots for MKS SBASE ( #9927 )
...
Fix #9477
7 years ago
Scott Lahteine
07ae23fe14
No pulse delay on last e_steps in advance isr
7 years ago
Scott Lahteine
881529a401
Fix #9904 - toDigital should show 00-99 hours
7 years ago
Scott Lahteine
ed758de80d
tweak comment in stepper.cpp
7 years ago
Scott Lahteine
d1dc863962
autotemp_factor is not value_celsius_diff
...
See https://github.com/MarlinFirmware/Marlin/issues/9852#issuecomment-369861822
7 years ago
Thomas Moore
f3914a432e
Clear retracted status when homing the Z axis
7 years ago
Scott Lahteine
6d7f4f84e2
Add board MKS_BASE_HEROIC ( #9926 )
...
Followup to #9008
- Don't define micro-stepping pins for boards that lack them.
- Allow setting of 128 microsteps with `M350`.
7 years ago
Scott Lahteine
649f375494
Fix: M112 calling kill from interrupt ( #9923 )
...
Fix #9906
7 years ago
Scott Lahteine
c37b3f995a
Sanity-check some graphical LCD-only options
7 years ago
Scott Lahteine
a2a672449a
Updated boot screen description
7 years ago
Scott Lahteine
61620cbd15
Tweak M211
7 years ago
Scott Lahteine
6e08ddce6e
Correct M401 / M402 description
7 years ago
Studiodyne
23a576faf7
[2.0] Fix for FW retract ( #9878 )
7 years ago
Ben Lye
461c8ef834
Fix DIGITAL_PIN_TO_ANALOG_PIN macro for Atmega1284p ( #9881 )
7 years ago
Scott Lahteine
88b6a15b47
Update M900 verbiage
7 years ago
Ben Lye
e2df286444
Update pinsDebug.h ( #9874 )
...
Fix display of analog input value.
7 years ago
Scott Lahteine
91db7930dc
Drop SCARA_FEEDRATE_SCALING
...
The updated planner takes the length of the move, so this pre-calculation is no longer needed.
7 years ago
Bob-the-Kuhn
c1f4112bdc
[2.0.x] Add 1284 support & misc. bug fixes ( #9864 )
7 years ago
Scott Lahteine
118899357d
Add sanity checks to Linear Advance 1.5 ( #9873 )
7 years ago
Scott Lahteine
1746749361
Followup to #9868
7 years ago
Scott Lahteine
a446433c87
Fix SENSORLESS_HOMING for Core Kinematics ( #9868 )
7 years ago
Scott Lahteine
2d1233b86c
Fix lcd_quick_feedback call for BTN_BACK
7 years ago
AnHardt
eb8b758226
Fix some mapper, charsize problems ( #9866 )
7 years ago
Scott Lahteine
8bffb26c23
Fix manual move position display
...
Manual moves now correctly include the workspace offset.
7 years ago
Scott Lahteine
8c03ce4d80
Fix Z safe homing sanity check for no probe
...
Fix #9851
7 years ago
Scott Lahteine
c471389afb
Add Einsy Rambo pins ( #9850 )
7 years ago
Zachary Hill
c22f8dd660
Get duration_t in printcounter.h for its clients ( #9843 )
7 years ago
Scott Lahteine
24b9c1923f
ubl G29 tweaks
7 years ago
Scott Lahteine
bd0967ad87
Fix BTN_BACK
...
Followup to #9835
7 years ago
Scott Lahteine
d9a98b5814
Russian language update
...
From #9849
7 years ago
Ben Lye
461cb22069
Fix Zonestar / ADC keypad with RAMPS. ( #9840 )
7 years ago
Scott Lahteine
35ec67885a
Add support for BACK button (RADDS) ( #9835 )
7 years ago
Scott Lahteine
0bc4c216ac
Patch up pinsDebug pins
7 years ago
Scott Lahteine
cd7dc49527
Fix CR-10 status screen missing commas
...
Fix #9660
7 years ago
geigerg
4817c78a65
Add files via upload ( #9828 )
7 years ago
TheSFReader
eb079959fb
Report sd card progress [FR] #9751 ( #9832 )
...
* SD Status auto-report feature
Feature Request #9751
7 years ago
Scott Lahteine
7bdb98c946
Fix #9826 . Solution by @gloomyandy
7 years ago
Scott Lahteine
02474a321a
Fix SDSUPPORT (and indentation)
...
Based on https://github.com/MarlinFirmware/Marlin/issues/8746#issuecomment-368471901 by @benlye
7 years ago
Scott Lahteine
cfdcf91df5
Fix compile error with initTone
7 years ago
Scott Lahteine
ae1a2ff16f
Pins parity with 1.1.x
7 years ago
Roxy-3D
306f44198e
Prevent serial buffer overrun in Pronterface
...
75ms might be excessive... But I know people are seeing problems with PronterFace as the client...
7 years ago
Scott Lahteine
966d9af98a
Mesh export in Bilinear + UBL M503
7 years ago
Scott Lahteine
8d5a77001e
EEPROM parity with 1.1.x
7 years ago
Scott Lahteine
2228dff3ea
ubl.h compile flags from 1.1.x
7 years ago
Sebastianv650
cb4cb86d80
Useless line removed ( #9814 )
...
nextAdvanceISR is set in the next if structure in every possible
situation, so it's useless to set it once more before.
7 years ago
Scott Lahteine
f2c0ed193d
Add tone support for Due ( #9807 )
7 years ago
Scott Lahteine
0557ab5780
Fix CONFIG_ECHO_START bug
...
In reference to #9633
7 years ago
Scott Lahteine
61688233c7
HAL style tweak
7 years ago
Scott Lahteine
19ba91f77a
Fix lcd_custom_bootscreen compiler warning
7 years ago
Scott Lahteine
f3dbe19669
Tweaks to HAL codestyle
7 years ago
Scott Lahteine
54c65fc3cb
Standardize LCD buzz defaults
7 years ago
Scott Lahteine
4953fb1c88
Standardize encoder defaults
7 years ago
Scott Lahteine
078627f805
[2.0.x] Creality Ender-4 configuration ( #9803 )
...
* Move Creality Ender-2 configurations
* Add Creality Ender-4 configurations
7 years ago
Scott Lahteine
5684beae90
Bring some configs up to speed
7 years ago
UtterlyD
813f9f3082
[bugfix_2.0.x] - LIN_ADVANCE V1.5 stepper.cpp ( #9797 )
...
Removal of obsolete (i) from port of LIN_ADVANCE from V1.1.x to V2..0.x.
7 years ago
Scott Lahteine
3f89bbeab5
Drop a conditional only used once
7 years ago
Scott Lahteine
689bc99402
Correction to acceleration
7 years ago
Roxy-3D
92c8efdc96
Change Folger Tech i3-2020 defaults
7 years ago
Scott Lahteine
2024775e07
Spanish (UTF8) Language ( #9786 )
...
From #7314 by @MrAmericanMike
7 years ago
Scott Lahteine
43ff15244d
Fix a progress bar condition
7 years ago
Scott Lahteine
b8485528b2
Prettify LCD_PROGRESS_BAR options
7 years ago
Zachary Hill
4d588b2d6a
Further fix of LCD_PROGRESS_BAR ( #9783 )
7 years ago
Scott Lahteine
e0227f2110
Fix *_CS_PIN for RAMPS_FD
...
Fix #9778
7 years ago
Scott Lahteine
e65a853c59
Fix LCD_PROGRESS_BAR
...
Fix #9208
7 years ago
Scott Lahteine
07d7e8aa1b
Merge pull request #9775 from thinkyhead/bf2_g28_restore_leveling
...
[2.0.x] Add RESTORE_LEVELING_AFTER_G28 option
7 years ago
Scott Lahteine
e749945317
Un-pause print on cancel ( #9780 )
7 years ago
Scott Lahteine
17d984eab3
Add RESTORE_LEVELING_AFTER_G28 to example configs
7 years ago
Scott Lahteine
b2cf253a13
Add RESTORE_LEVELING_AFTER_G28 option
7 years ago
Scott Lahteine
65519263f4
Fix broken LEVEL_BED_CORNERS
...
Fix #8805
7 years ago
Scott Lahteine
8f9262f3fe
Fix path to _Statusscreen.h
7 years ago
Scott Lahteine
007c56f453
Fix HAL_STM32F1/endstop_interrupts.h
...
In response to https://github.com/MarlinFirmware/Marlin/issues/7076#issuecomment-367556982
7 years ago
Scott Lahteine
0542b03750
Fix bootscreen include path
...
Fix #9759
7 years ago
Scott Lahteine
2bd252b501
[2.0.x] LIN_ADVANCE v1.5 ( #9712 )
7 years ago
Scott Lahteine
90fa423737
Preliminary cleanup of #include structure ( #9763 )
7 years ago
Scott Lahteine
a6b7e721cf
Slovak language update
7 years ago
Scott Lahteine
2c9775313a
Fix Z position on HD44780
...
Fix #9732
7 years ago
Studiodyne
9c9cd54ef3
Add Z Fade Height edit to UBL and Tune submenus ( #9738 )
7 years ago
Scott Lahteine
3851ffce0f
Merge pull request #9637 from marcio-ao/pr-lite-st7920-status
...
[2.0.x] Light-weight status screen for ST7920 based printers
7 years ago
Scott Lahteine
5f8b2c2ff0
More descriptive environment error message
7 years ago
Scott Lahteine
b17982bde9
Merge pull request #9769 from teemuatlut/bf2_compile_fixes
...
[2.0.x] Fix compiling with M600 and runout sensor
7 years ago
Scott Lahteine
799e3b2b40
LPC1768 HAL formatting/comments
7 years ago
teemuatlut
5968a3e60e
Add ADVANCED_PAUSE_FEATURE include
7 years ago
teemuatlut
93cc3a8492
Make used methods public
7 years ago
Marcio Teixeira
13176dfe2f
Merge remote-tracking branch 'origin/pr-lite-st7920-status' into pr-lite-st7920-status
7 years ago
Scott Lahteine
424b9a83cd
Slovak language update
...
From @rmoravcik at #9760
7 years ago
Scott Lahteine
e75ccfd727
Hatchbox Alpha Config with E3Dv6 ( #9762 )
7 years ago
Scott Lahteine
556abc0888
Add LIGHTWEIGHT_UI to example configs
7 years ago
Marcio Teixeira
532bb3aaa1
Lightweight status screen for ST7920
...
- This status screen uses the ST7920 character generator to greatly
reduce SPI traffic and MCU load when updating the status screen.
- Has been tested with the RepRapDiscount Full Graphics Smart Controller
but should work with any LCD that uses an ST7920 or fully compatible
controller.
7 years ago
Scott Lahteine
59c98d6fd5
Hephestos2 heated bed kit for all ( #9757 )
7 years ago
Scott Lahteine
8c1a82c327
Merge pull request #9753 from ldkraemer/BF2CR-10Bootscr
...
[2.0.x] Creality CR-10mini configuration
7 years ago
Scott Lahteine
72f63a4980
Fix DOGM progress bar with LCD_SET_PROGRESS_MANUALLY
7 years ago
ldkraemer
6c3162f9c6
Add CR-10 Mini configuration
7 years ago
ldkraemer
4431f4deb8
Add CR-10S _Bootscreen.h
7 years ago
Marcio Teixeira
e7f329edb2
Added bed corners to bed icon.
...
- This makes it look less like a dash (idea stolen from cjsoong).
7 years ago
Marcio Teixeira
e84a5545e1
Removed unnecessary extended mode switch.
...
- This will slightly reduce the SPI requirements for
updating the progress bar.
7 years ago
Scott Lahteine
343c17d5b3
Reduce Creality3D bootscreens flash usage ( #9752 )
7 years ago
Scott Lahteine
63bc6ade4f
Fix pinsDebug compile error
7 years ago
Roxy-3D
d504bbbfa4
Fix botched check for being off the mesh...
7 years ago
Marcio Teixeira
716a22498f
Changed temp type from uint8_t to int16_t
...
- Also deleted old implementation files which had been renamed.
7 years ago
Scott Lahteine
7d8c6b3f3c
Add 20x4 option for Sainsmart LCD ( #9740 )
7 years ago
Scott Lahteine
1d7f5be0ff
quick_home_xy sensorless homing
7 years ago
Scott Lahteine
eb182c08af
Merge pull request #9733 from thinkyhead/bf2_random_fixup_branch
...
[2.0.x] Drop HAL_timer_set_count
7 years ago
Kevin
03b48df7bb
RADDS: Add EEPROM Size ( #9737 )
...
needed for UBL
7 years ago
Scott Lahteine
9f0907d40c
Fix big edit font width calculation
...
Fix #9685
7 years ago
Marcio Teixeira
9d5968e8ec
Fixed dual-extruder in Lightweight UI.
...
- Moved bed icon down when the machine is configured with two nozzles.
7 years ago
Scott Lahteine
4303f2e377
Fix MALYAN_LCD message bugs
...
Fix #9711
Replacing #9731
7 years ago
Scott Lahteine
12c5fdfdb5
Fix CYCLES_PER_MICROSECOND conflict on STM32F1
7 years ago
Scott Lahteine
a810e585db
Drop HAL_timer_set_count
7 years ago
Bob-the-Kuhn
a823b801b8
Merge pull request #9729 from Bob-the-Kuhn/U8G-compile-error-2.0.x
...
[2.0.x] Move #include <U8glib.h> in ultralcd_st7920_u8glib_rrd_AVR.cpp (fix bug introduced in PR #9624 )
7 years ago
Bob-the-Kuhn
47d529aac5
move #include <U8glib.h>
7 years ago
Marcio Teixeira
aada1e698f
Removed unused configuration options.
7 years ago
Marcio Teixeira
c7513eb032
Merge branch 'pr-lite-st7920-status' of github.com:marcio-ao/Marlin into pr-lite-st7920-status
7 years ago
Scott Lahteine
73cd34b121
Finish AUTO_POWER_CONTROL implementation
...
Followup to #9503
7 years ago
Scott Lahteine
fc460fff94
Extend menu items for SWITCHING_EXTRUDER
...
Reference #5367
7 years ago
Scott Lahteine
c4ec01d59b
Conditionals for SWITCHING_EXTRUDER
...
In reference to #5367 . SWITCHING_EXTRUDER was not fully implemented for EXTRUDERS > 2.
7 years ago
Scott Lahteine
d4e4fe40e0
Add SENSORLESS_HOMING delay to quick_home_xy
...
Fix #9471
7 years ago
Scott Lahteine
25e3e62354
Null-terminate lcd_status_message
7 years ago
Scott Lahteine
a11fcd46a2
Merge pull request #9699 from Studiodyne/Studiodyne-filamentMulti
...
[2.0.x] Support multiple filament runout sensors
7 years ago
Scott Lahteine
b3deadd898
Don't raise FIX_MOUNTED_PROBE on stow
...
Reference #9336
7 years ago
Scott Lahteine
a74cece6d0
CR-10 Bootscreen
...
From @plainpylut in #9660
7 years ago
Scott Lahteine
8733d5a296
Add NUM_RUNOUT_SENSORS to example configs
7 years ago
Studiodyne
d3ca82d8c2
Support for multiple filament runout sensors
7 years ago
Scott Lahteine
0106c3e476
Style tweak in MarlinSerialUSB_Due.h
7 years ago
Scott Lahteine
3d1692d1fd
Fix X2 enable with X_DUAL_STEPPER_DRIVERS
...
From #9286
7 years ago
Scott Lahteine
c241da32e8
stepper.h parity with 1.1.x
7 years ago
Scott Lahteine
3af988a7f3
Add sensorless homing delay to home_z_safely
...
Based on #9705
7 years ago
Scott Lahteine
ca55f2927a
Pulldown pin mode support ( #9701 )
...
Implemented for LPC1768.
7 years ago
Scott Lahteine
aef9e036bf
More overridable FIL_RUNOUT_PIN
7 years ago
Scott Lahteine
79272f98fc
Proposed changes to ST7920 lightweight status screen
7 years ago
Marcio Teixeira
24eb275b99
Added a light-weight status screen for the ST7920
...
- The status screen uses the ST7920 character generator to greatly
reduce SPI traffic and MCU load when updating the status screen.
- Has been tested with the RepRapDiscount Full Graphics Smart Controller
but should work with any LCD that uses an ST7920 or fully compatible
controller.
7 years ago
Scott Lahteine
a6563df705
Sync pinsDebug_list.h between 1.1.x and 2.0.x ( #9693 )
7 years ago
Scott Lahteine
bab0e975c8
The ENDER can use BOARD_MELZI_CREALITY ( #9692 )
7 years ago
Scott Lahteine
83d7e95de0
Add MSG_THERMAL_RUNAWAY_BED ( #9691 )
7 years ago
Scott Lahteine
8ffa0b24a4
Strip excess G28 debug logging
7 years ago
Kevin
9019ea0fce
Option to force X or Y to home first when homing the other axis
7 years ago
Scott Lahteine
60fc372211
Add CODEPENDENT_XY_HOMING to example configs
7 years ago
Scott Lahteine
da7c51d820
Space out some pins lines
7 years ago
Bob-the-Kuhn
e05673a379
[2.0.x] VIKI2 & RE_ARM changes ( #9686 )
...
* VIKI2 & RE_ARM changes
1. Remove `DISABLED(SDSUPPORT)` from ST7565 in `ultralcd_impl_DOGM.h`. These LCDs share pins with the SD card and can run at the SD card rates.
2. Add SDSS definition to `pins_RAMPS_RE_ARM.h`. Apparently the SDSS definition in `pins.h` is being processed before the one in `spi_pins.h` which resulted in not being able to read the SD card.
7 years ago
Scott Lahteine
7a381366aa
Merge pull request #9208 from benlye/benlye-m73
...
[2.0.x] Allow M73 without SDSUPPORT
7 years ago
Scott Lahteine
7d093edc18
Add Tronxy XY100 configuration
...
Based on #9674
7 years ago
Scott Lahteine
472229b974
Fix #9681
7 years ago