646aa20b43
Overhaul of G33 Delta Calibration ( #8822 )
7 years ago
ac2e0afb62
Low Point for delta calibration ( #10363 )
7 years ago
57a899a412
[2.0.x] 6th-order jerk-controlled motion planning in real-time for AVR ( #10373 )
7 years ago
85014cd132
[2.0.x] LPC1768 - automatic selection of upload disk ( #10374 )
7 years ago
8669dba5e6
Merge pull request #10172 from noingwhat/2.0.x-Filament-Change-Acceleration
...
[2.0.x] Filament load/unload add acceleration for Bowden
7 years ago
472ab0cc24
Tweak RAMPS SDSS pins
7 years ago
b94c8defee
Provide additional information about SMART-RAMPS board ( #10353 )
7 years ago
6f8e228880
Add RESET_PIN to pins_RAMPS_SMART.h
7 years ago
2d9b0a66fe
Add Filament Change accelerations
7 years ago
71d3523254
Add Filament Change accelerations to example configs
7 years ago
8b8ad14178
Add Z_PROBE_LOW_POINT to prevent damage
7 years ago
82dafbba33
Add Z_PROBE_LOW_POINT to example configs
7 years ago
a731a723e8
Better i3-2020 Z_PROBE_OFFSET_FROM_EXTRUDER
7 years ago
26cc12eaa4
Resolve corruption of Max7219 Debug LED Matrix
7 years ago
dca69efc11
Update Bed PID comments
7 years ago
56486c5c0e
Apply const to manage_inactivity
7 years ago
a6485456df
Fix LIGHTWEIGHT_UI with UBL
...
See https://github.com/MarlinFirmware/Marlin/issues/10317#issuecomment-379100702
7 years ago
e02fc4f1d6
Better RESTORE_LEVELING_AFTER_G28 sanity-check
...
As suggested by @GMagician
7 years ago
44a697ab04
Set STM32F1 TEMP_TIMER_FREQUENCY to 1K
...
Responding to https://github.com/MarlinFirmware/Marlin/pull/8833#issuecomment-379426803
7 years ago
cec6e19099
Add RepRapPro Huxley configuration
...
Based on #10343 by @indazoo
7 years ago
9ff4e9e1e6
Patch _IS_HW_SPI so defined() works
7 years ago
cea398849e
Tweak to gcode_line_error/return
7 years ago
a29adde5c0
Implement BEZIER_JERK_CONTROL
...
Enable 6th-order jerk-controlled motion planning in real-time.
Only for 32bit MCUs. (AVR simply does not have enough processing power for this!)
7 years ago
5932df7ea1
Add BEZIER_JERK_CONTROL to example configs
7 years ago
0e8242180d
Chamber temperature monitoring and auto fan control.
...
This is an initial cut for feedback, updated for 2.0.x.
Chamber temperature is currently reported along with hot end and bed
temperatures to serial. The format is just like that used for hot end
and bed temperatures, but using 'C' prefix. As there is no heater,
target is always 0. Is this appropriate, is there a better way to report
chamber temperatures?
Chamber temperatures are not reported on the LCD in any way.
When auto chamber fan is enabled, it currently just uses the same
temperature threshold as the other auto controlled fans.
As the chamber temperature is not connected to any heater, it doesn't
undergo mintemp/maxtemp monitoring. This would need to change in the
future if chamber heating became a feature.
7 years ago
5b3bda1c16
Add Chamber Temp options to example configs
7 years ago
acda4ecb20
Fix DUE Trinamic SW/HW SPI sanity check ( #10336 )
7 years ago
ab715c70d1
TMC SPI sanity-check and pins debugging ( #10324 )
7 years ago
4dc7e64789
Update Slovak language
...
Based on #10313 by @rmoravcik
7 years ago
0dccf9ea6a
Merge pull request #10318 from marcio-ao/pr-einsy-retro-tmc2130
...
[2.0.x] Fix TMC2130 DIAG1 active high, Einsy Retro
7 years ago
2efc072fdb
Clear progress bar on completion ( #10333 )
...
Fix #10330
7 years ago
6ce060cfe0
[2.0.x] Update language_it.h ( #10322 )
...
Updated to #10296
7 years ago
9356cf648f
Added support for Einsy Retro
...
http://reprap.org/wiki/EinsyRetro
7 years ago
75037493fa
Default active low for TMC2130 DIAG1 ( #10294 )
...
- Added sanity check to inform users to set the endstop to inverting
when using SENSORLESS_HOMING
7 years ago
e8e60263c8
Scale feedrate (mm/s to deg/s) for SCARA
7 years ago
051303ad42
Russian language updates
...
From #10311 by @anton-piliugin
7 years ago
2fa0a73c2c
Implement filament change continuous purge
7 years ago
d133ad61f3
Add continuous purge to example configs
7 years ago
4b25543633
Backtrace formatting cleanup
7 years ago
902c885782
Switch to TMC2130 compatible hardware SPI & misc ( #10299 )
7 years ago
1c36606886
Fix MSG_HEATING_FAILED_LCD_BED macro evaluation
7 years ago
fe91514395
MBL should add z_offset regardless of fade ( #10308 )
7 years ago
8bc93c6f2b
Improve heating/cooling LCD messages ( #10293 )
7 years ago
21a47b50f4
Additional tool-change fixes ( #10304 )
...
Followup to #10257
7 years ago
f68b4265a6
Fix a probe pin definition
7 years ago
a019eebdd6
support utf8 unicode for test language ( #10220 )
7 years ago
656219d867
Add configs for Creality CR-8
7 years ago
7cbbc2af7a
[2.0.x] Optional heater signal inversion ( #10260 )
7 years ago
4d1a61335c
[2.0.x] Fixed Makefile for Marlin 2.0 ( #10255 ) ( #10281 )
...
* Fixed Makefile for Marlin 2.0 (#10255 )
- Makefile now supports the new Marlin 2.0 directory hierarchy.
- RELOC_WORKAROUND is now automatically enabled based on avr-gcc version.
* Makefile support for U8glib and TMC2130Stepper
- Updated paths for oliver's U8glib 1.19.1
- Added option for teemuatlut's TMC2130Stepper 2.2.1
7 years ago
241996d5d6
Merge pull request #10257 from thinkyhead/bf2_tool_change_debug
7 years ago
4c79dc1093
Fix a Serial+EEPROM compile error
...
Fixes #10278
7 years ago
93305a2d5e
Fix some spellings
7 years ago
adcb87f0db
Z Endstop Servo => Z Probe Servo
7 years ago
4f0eafce8f
Add more AVR boards to Makefile
7 years ago
4a23069de9
Fix Ender 4 / CR-8 compilation
...
- Assign 243 (like EFB) as Ender-4/CR-8 board ID
- Add to `Makefile`
- Add to `pins.h`
7 years ago
02f0f95d40
Handle disabled HYBRID_THRESHOLD in EEPROM ( #10275 )
7 years ago
9ec2c03c5b
Fix likely error in retract/recover
...
Addressing #10200
7 years ago
49f384a2ab
Note about MKS_MINI_12864 in sanitycheck
7 years ago
2672120a97
Do a small raise for all move-back
7 years ago
5acccbacc1
Simplified leveling-based tool change
7 years ago
1a75165f35
For set_z_fade_height use set_bed_leveling_enabled
7 years ago
d1734a089a
Split up tool_change for some setups
7 years ago
a9f94f260a
Some RADDS pin updates
7 years ago
31df43212c
Use lcd_printPGM_utf in more places
...
Fix #10256
7 years ago
7d8a46519f
Output ABC for delta stepper counts
7 years ago
6098efcc59
Use float62 for LCD edit of Z Fade
7 years ago
f6d13e2295
Allow Z_SAFE_HOMING sanity checks to handle floats
7 years ago
889fd5f71f
Backtrace minor cleanup
7 years ago
53f0c7522a
Symmetrical FWRETRACT Z Hop
...
Do the Z lift normally before setting Z back to its prior value. But do the Z lower using spoofing. This should produce proper symmetrical movement.
7 years ago
ac7e97f4fe
Change order of inactive stepper disable/enable
...
This ensures that steppers that share an enable pin will only be disabled for a miniscule time.
7 years ago
55e9b85ad6
Clear the "Wait for user" message set by M0/M1
...
See https://github.com/MarlinFirmware/Marlin/issues/10246#issuecomment-377146936
7 years ago
b6a55f0891
Temporary workaround for tool-change compile error
...
Pending a more complete solution to tool-change Z deviation.
7 years ago
b852781eba
Fix BLTOUCH compile error
...
Followup to #10250
7 years ago
c1f58a238d
No delay in sensorless quick homing ( #10254 )
7 years ago
1be955e52a
Alert users about low Z jerk values
7 years ago
9e4c037cef
Wait before turning off PRINTER_EVENT_LEDS at print end ( #10248 )
7 years ago
8b7381b626
Clear sensorless homing in home_delta after first move-to-top
7 years ago
dbe2b6f7b0
Do moves towards endstops differently in do_homing_move
7 years ago
d573a2cada
Fix pins_RAMPS.h for 32-bit platforms
...
Followup to 436e5b7
7 years ago
f04be05a14
"G28 Z Forbidden" => "Home XY first"
...
Some languages will need to be updated for proper phrasing
7 years ago
a97624dd81
Allow pinsDebug "Analog in" long int
7 years ago
7b8bb2519e
Fix gcode_line_error call
...
Followup to 3007eee
7 years ago
aa20b3ef7c
Fix linear/3-point manual leveling buffer overrun
...
Fixes #10137
7 years ago
cbdc78ec0f
Fix STM32 compilation with PlatformIO ( #10245 )
7 years ago
9d2ea5d64b
Undo German changes
...
See 941e9bd329 (commitcomment-28262166)
7 years ago
2bc7f416ee
Fix missing comma in tmc_sgt
...
Fixes #10209
7 years ago
38378cd0e8
M218 with DELTA needs planner.h
...
Fix #10232
7 years ago
3007eee22e
Require a checksum when writing to SD
...
From #10204 by @adriancuzman
7 years ago
9656a82609
Fix G53/CNC_COORDINATE_SYSTEMS compilation, Travis testing ( #10227 )
7 years ago
749f19e502
[2.0.x] Move backtrace to a shared location ( #10237 )
...
- And implement the `backtrace()` function call
7 years ago
7dc256432f
Restore STM32F1 series to working order. ( #10229 )
...
The `_O2` attribute is no longer needed on the malyanlcd function, and the macros have broken timer numbers - reset this to a function to return the right device. Also fix the bit order cast in SPI.
7 years ago
d1f14202a9
[2.0.x] NANODLP_Z_SYNC requires linear axes ( #10240 )
7 years ago
b287560258
Fix say_M603
7 years ago
436e5b7ea3
Apply spacing in pins files
7 years ago
4d533b9baa
Update bq Hephestos 2 probe offset
...
From #10234 by @thopiekar
7 years ago
78df07ac71
Merge pull request #10221 from ejtagle/bugfix-2.0.x
...
[2.0.x] DUE: Several fixes to the backtracker
7 years ago
8934a2c49b
Added some missing Thumb instructions to the traceback follower, so now it is able to traceback through switch() statements
7 years ago
328edea03a
Several fixes to the backtracer. Tested ant it works
7 years ago
aa6dacbbdf
German update
...
Based on #10216
7 years ago
8322a79bb9
update the UTF-8 C strings for Chinsee languages, for Simplified and Traditional Chinese ( #10211 )
7 years ago
9a24c0ae3f
Tons of fixes to the backtracker code, and also added an extra backtracker that does not require unwind tables to work and it is used if unwind tables are absent
7 years ago
a891af2f7a
Enforce minimum TMC2130 / TMC2208 libs
7 years ago
75b381cd28
Merge pull request #10203 from Bob-the-Kuhn/sanity-check-fix
...
[2.0.x] Fix TMC sanity checks that always fail
7 years ago
433e984d1f
move comment to fix compile error
7 years ago
f7857ac8a8
Merge pull request #10185 from ejtagle/bugfix-2.0.x
...
[2.0.x] DUE debugging: Solve WDT startup delay, add traceback & crash report uses programming port baud rate
7 years ago
b756a15aba
another needs to be deleted
7 years ago
50c81ebe0d
remove check that always fails
7 years ago
3ac135cef3
Enforce minimum TMC2130 / TMC2208 libs
7 years ago
8870f9b1da
Fix M503 helper functions following TMC updates ( #10197 )
7 years ago
bb7236a750
Z correction on tool-change for all HAS_MESH ( #10199 )
7 years ago
509227fd80
change to mode 0
7 years ago
c3b23974bd
Added detection of case when no unwind tables are available
7 years ago
ea1a83ce41
Use pgm_read_ptr for tables of pointers
7 years ago
9da0797e29
Fix EEPROM size of tmc_hybrid_threshold
...
Followup to #10102
7 years ago
daf643e1ce
[2.0.x] TMC: Match axis label order ( #10188 )
7 years ago
1628a9e864
make data declarations consistent
7 years ago
b210bdf032
Now the Crash reporter uses the configured BAUDRATE to send the report through the Programming port. And also shows the traceback of functions as discussed. For that latest feature to work, you need to compile the project with -funwind-tables and -mpoke-function-name compiler flags
7 years ago
c5730cf711
As Bob-The-Khun suggested, resetting the USB peripheral solves the huge startup delays that happen when a WDT reset happens and we are connected through the native port
7 years ago
1cb810ff1c
[2.0.x] Automatically reset stepper timeout ( #10179 )
...
* Automatically reset stepper timeout in manage_inactivity
Any code that adds moves to the planner can skip resetting the stepper timeout. We can let `idle` / `manage_inactivity` reset the timer whenever it detects any moves in the planner.
* blocks_queued => has_blocks_queued
7 years ago
97e8a6ebd9
Various fixes for DUE... ( #10152 )
...
- Watchdog reset during SD Card initialization.
- Move `DebugMonitor` to `DebugMonitor_Due.cpp`.
- Since the watchdog is enabled on boot do extra resets during init.
- Have `thermalManager` do watchdog reset before its ISR starts to prevent reset.
- Ensure that timers are stopped before reprogramming them to address tone issues.
- Improve SAM3XE reset when reflashed through the native port.
7 years ago
c3c264978f
correct truncated comment
7 years ago
9fd1016bb1
Trust the bootloader to clear globals
7 years ago
045ee28c50
Tweaks to M915
7 years ago
987597532c
For MK2_MULTIPLEXER undef DISABLE_INACTIVE_EXTRUDER
...
Fix #10098
7 years ago
ff304d3767
Allow G53 to go back to native space
7 years ago
bc45fb6b13
Tweak use of move_z_after_probing
7 years ago
c352954882
Allow no raise after run_z_probe in probe_pt
7 years ago
ae39fbd646
Also suppress keepalive with suspend_auto_report
7 years ago
8dfaf1539e
Merge pull request #10102 from thinkyhead/bf2_eeprom_M913
...
[2.0.x] More complete Trinamic driver options
7 years ago
837ac2fdbd
[2.0.x] Fix_Autotune_THERMAL_PROTECTION_BED_off ( #10166 )
...
- Fix Autotune Thermal Protection
- Make 2 constants in autotune configurable
7 years ago
785dbfc72d
[2.0.x] FASTIO consistency ( #10164 )
7 years ago
7308ef7809
Add conditional, give DUE SPI a unique name, fix compiler warnings ( #10168 )
7 years ago
b5b39af531
[2.0.x] TMC: Fix CURRENT_STEP_DOWN ( #10170 )
7 years ago
a5c6d3c7b8
Prevent null pointer crash in Endstops::update
...
Thanks to Evgeny Kotsuba!
7 years ago
a46bac3100
Add 'I' parameter to M906/M913/M914; 'T' to M906/M913
7 years ago
cfc13ed7f3
Quiet M906/M913/M914 with axes. Patch for DISTINCT_E_FACTORS.
7 years ago
c95450016b
Improve Trinamic support in the EEPROM
7 years ago
48d7036874
Consolidate smart stepper driver initialization
7 years ago
53362b81cc
Tone fixes/changes ( #10151 )
7 years ago
dd2949922b
Consolidate 3-point leveling point options
7 years ago
1d22609473
MIN_PROBE_EDGE replaces DELTA_PROBEABLE_RADIUS
7 years ago
eaefc1e410
Add CorePQ support for BABYSTEPPING ( #10155 )
7 years ago
72281c4ff9
Turn power off in `kill` instead of setting PS_ON to input
7 years ago
9d99360912
Fix matrix.debug output
7 years ago
bbfbf90797
Fix for DUE - no host support on native USB if SD card not enabled ( #10148 )
7 years ago
772810fb24
Followup to PORTVAR patch
7 years ago
978f342392
Reduce some tmc_util strings
7 years ago
fbdc5ad962
Prevent lcd_update stack overflow on SD Card change
7 years ago
c0d694d5d3
Squash UBL postscript comment
7 years ago
93af8aa157
Fix home_delta for SENSORLESS_HOMING ( #10145 )
7 years ago
0543362b34
Don't init the tone timer if no BEEPER_PIN
7 years ago
c6ff39cc14
Spacing cleanup
7 years ago
9e9e29ddf8
Einsy: Regular endstops and BLTOUCH pins
...
Based on #10131
7 years ago
c79b53d406
Merge pull request #10140 from Bob-the-Kuhn/DUE-full-speed
...
[2.0.x] DUE - add full speed USB native port option
7 years ago
7f1afbfd60
can't type
7 years ago
23760d6c14
add full speed option
7 years ago
cbcd1ed42d
full speed
7 years ago
6689884910
Easier override of ST7920 LCD timing
7 years ago
d603e655d3
Fix SWITCHING_EXTRUDER manual movement
7 years ago
5f77816772
Reduce size of "only one" sanity checks
7 years ago
8922b56b58
Fix some spelingz
7 years ago
a6feb58837
Delta support for multiple hotends with offsets ( #10118 )
7 years ago
2e43438e0c
Add C parameter to M27 to include the long filename
...
In answer to #10001
Add an option to retrieve the currently open file name (long filename if possible).
7 years ago
2168d6ac25
Allow NULL prepend in lsDive
7 years ago
1e946d681d
Update Marlin for newest TMC libraries
...
- TMC2130Stepper v2.2.0
- TMC2208Stepper v0.0.4
7 years ago
63fc4a8521
BIBO2 default update and Cyclops config ( #10108 )
7 years ago
404fc94705
DUE USB CDC: Do not send any character if no program on the PC is listening to them. This avoids Marlin waiting until the user actually opens a program that is able to consume the output of Marlin
7 years ago
4aebe3d82e
Pretty up EEPROM port args
7 years ago
51bf3c9503
Fix E direction for MK2_MULTIPLEXER with LIN_ADVANCE
7 years ago
e6dcfa64b0
Cast SERIAL_CHAR to void in M122 ( #10086 )
7 years ago
c24dbcbfe1
When STATUS_EXPIRE_SECONDS is 0, hide the position. ( #10081 )
...
Some users may prefer to hide the position updates on the `LIGHTWEIGHT_UI` altogether. This leads to an even less cluttered display (it also saves on SPI traffic and one byte of RAM).
7 years ago
e7a61de8af
[2.0] FWRetract Reset (Best way) ( #10083 )
7 years ago
f894209de2
Merge pull request #10093 from thinkyhead/bf2_trinamic_config
...
[2.0.x] Clean up Trinamic config options, sanity check
7 years ago
f1327fd5f9
Use lcd_goto_previous_menu_no_defer more
7 years ago
e7570f3195
Improve TMC config organization, naming
7 years ago
374ea49be9
Revert marlinAnalogInputToDigitalPin
7 years ago
34f656decd
Add TMC2208 include in tmc_util.h
7 years ago
07cf2cd9c4
Fix sensorless_homing_per_axis compile warning
7 years ago
b858c638ad
Fix compiler warning for HAL_ANALOG_SELECT
7 years ago
c4467da53a
Merge pull request #10063 from ejtagle/bugfix-2.0.x
...
[2.0.x] DUE - add programming capability to native port
7 years ago
65ce0303f8
Fix MKS_12864_OLED blank issue
...
Fixes #10071
7 years ago
36452b4d6e
Fix filename HAL/DUE/servotimers.h => ServoTimers.h
7 years ago
14c03cb6f4
[2.0.x] Make MIN_PROBE_EDGE a general option (for electronic probes) ( #10069 )
...
Some probes don't work near the edges of the bed. This change promotes MIN_PROBE_EDGE to a general setting that applies to all probing functions.
7 years ago
5dec828abc
Add MKS_12864OLED to lcd_implementation_init
...
Followup to #7914
7 years ago
468f34104b
Patch do_blocking_move_to so 'destination' can be used
7 years ago
5b45aab262
M218: report with no parameters
7 years ago
18de11c1ea
Followup to auto-assign of dual axis CS pins
7 years ago
703c8ac0ef
Added Arduino-compatible kludge to the (ATMEL supplied) SAM3X USB stack we are now using so the Native port is also usable as a programming port on Arduino DUE and derived designs
7 years ago
28f1276286
[2.0.x] Add Z_AFTER_PROBING option ( #10058 )
...
Some "fix-mounted" probes need manual stowing. And after probing some may prefer to raise or lower the nozzle. This restores an old option but tailors it to allow raise or lower as preferred.
7 years ago
dd19e74476
Cleanup trailing whitespace
...
@Bob-the-Kuhn — Please set your git options to remove trailing whitespace on commit.
7 years ago
d0ac0151b6
Fix typo in ubl.prepare_segmented_line_to
7 years ago
d385b9aac7
Auto-assign CS pins for X2, Y2, Z2 ( #10057 )
...
Fixes #9211
7 years ago
bae1cb859c
Patch flush_and_request_resend for 1.1.x parity
7 years ago
51ebdf3b7d
Finish scroll_screen with menu direction/multiplier
...
Fixes #10041
7 years ago
0d8c15c01f
restore PR 9661 files & V1 fix
7 years ago
751785fc97
Followup to recent patches
...
- `M666` is static, not inline
- Disambiguate some stepper macros
7 years ago
a0211f5d6c
Disambiguate else in stepper_indirection.h
7 years ago
f003173752
Fixup M666
...
Followup to d6df032
7 years ago
bf59a4a6df
Revert "[2.0.x] DUE compatibility with shared SPI LCDs, USB mass storage, add pin defs & update examples\MakerParts\Configuration.h"
7 years ago
fd1d590726
[2.0.x] Silence M204 ( #10037 )
...
`M204` is often used by slicers to set acceleration depending on perimeter, infill, etc., so Marlin's answers are flooding the serial windows. Silence `M204` according to the philosophy that setter commands should only send a reply if no parameter is given.
7 years ago
f10c87b442
Update Endstops class for 1.1.x parity
7 years ago
d6df0322c2
Update M666 for XYZ dual endstops
7 years ago
fbc41c0e98
Update Marlin G-code summary
7 years ago
239902f861
Fix E2END and add EEPROM to Smart RAMPS
...
Reference #9983
7 years ago
ddce486360
Merge pull request #10032 from thinkyhead/bf2_unknown_z_no_raise
...
[2.0.x] Add UNKNOWN_Z_NO_RAISE to prevent Z grinding
7 years ago
79e6d890d5
Add UNKNOWN_Z_NO_RAISE to example configs
7 years ago
419d12ca1b
Add UNKNOWN_Z_NO_RAISE option
...
With this option enabled, Z won't ever be raised until after `G28` has been completed, and it won't raise if Z becomes unknown. This is good for machines whose beds fall when Z is powered off.
7 years ago
3b4c89e4b5
Move do_probe_raise closer to set_probe_deployed
...
…and limit the raise to Z_MAX_POS
7 years ago
2908e76151
Fix position_is_reachable_by_probe typo, add comment
...
Fix #10029
7 years ago
26dc594ebb
prevent steppers from turning off during manual probes
7 years ago
d8eadf3796
fix ubl_G29.cpp Travis error
7 years ago
914bb80bde
removed SDSS init
...
added device & comm drivers for shared SPI LCDs
mistyped some updates in ultralcd_impl_DOGM.h
remove unwanted changes in onfiguration.h
still can't type
Update HAL_LCD_class_defines.h
include USB mass storage & misc
7 years ago
6d9ea7e184
Fix position_is_reachable_by_probe typo, add comment
...
Fix #10029
7 years ago
646dd5554c
prevent steppers from turning off during manual probes
7 years ago
161ff9ff35
Fix UPDATE_ENDSTOP for CorePQ compatibility
...
Fixes #9939
7 years ago
49ca67202f
Patch configuration_store for extra serial port
...
Fix #9948
7 years ago
cc59ac4603
Fix _tmc_say_axis string address
...
Fixes #10003
7 years ago
16a8edc5f0
Add more delay before pulse off in Linear Advance ISR
...
A capital idea from https://github.com/MarlinFirmware/Marlin/pull/9914#issuecomment-371614153
7 years ago
dfd5d2fe75
Have position_is_reachable_by_probe use the whole bed ( #10020 )
...
Previously `position_is_reachable_by_probe` was limited to the area specified for `G29` mesh leveling (even if leveling was disabled). This change will properly consider the entire bed area so that `G30` and other non-leveling probing may take place.
7 years ago
67a17446f2
Fix DUE incompatible enum type specification ( #10017 )
7 years ago
3c58ca181c
[2.0.x] Correct step pulse width on LPC1768, DUE & Teensy35_36 ( #10016 )
7 years ago
e297748b22
Apply const, safe_delay in servo.*
7 years ago
3c2bfa5e53
Update powersupply_on in power_on/off ( #10015 )
...
Fix #10004
7 years ago
42608b1925
Init old_red to 127 to ensure initial change
...
Fix #10012
7 years ago
317673fec3
Init watchdog last in setup()
7 years ago
8d32fd997f
Wrap NORM_E_DIR/REV_E_DIR macros in do{}while(0)
7 years ago
1913c37a91
Tweak to manual move eindex arg
7 years ago
98d48fc731
Followup to HAL_timer_restrain
...
Followup to #9985
7 years ago
03e3011332
Fix compile error with MAX_MESSAGE_LENGTH
...
Fix #9988
7 years ago
6b4a928145
2uS default step pulse ( #9989 )
7 years ago
ca577c1638
Fix up various spacing, comments, and typos
7 years ago
d45f19d385
Remove Unicode from var name
7 years ago
224688cc3b
Fix for unicode-ignorant gcc preprocessor
7 years ago
a1a88ebabc
HAL function to ensure min stepper interrupt interval ( #9985 )
7 years ago
be0e100fed
Fix sd subdirectory encoder position
...
Followup to 7e386c7
7 years ago
04dedc7ed8
always completely initialize display ( #9981 )
7 years ago
0149680f54
Fix compile error with char LCD
7 years ago
9515e5aefb
Fix LA_active_extruder (static)
7 years ago
e5ec793f7e
Wrap stepper indirection macros
7 years ago
5b85464791
Fix for LA ( #9964 )
...
Missed in the original LA 1.5 PR: eISR has to use a local copy of
current_block->use_advance_lead because it might still run wenn the last
block has been set to NULL.
7 years ago
7e386c7e98
Fix encoder position for sddirectory
7 years ago
1d604be671
Suspend auto-report during UBL map output
7 years ago
eb212ae073
Add suspend_auto_report flag to suppress auto-report
7 years ago
ffbf63e6af
Add HAS_TEMP_SENSOR conditional
7 years ago
94f5204629
Move AUTO_REPORT_SD_STATUS to SDSUPPORT block
7 years ago
22a017a856
Rebuild SD file sort array on Stop SD Print ( #9976 )
...
Thanks Chuck Hellebuyck.
7 years ago
920d92aa46
Merge pull request #9974 from thinkyhead/bf2_tmc_util_progmem
...
[2.0.x] Move tmc_util.* extended_axis_codes to PROGMEM
7 years ago
b198b49d15
Followup to AUTO_REPORT_SD_STATUS
...
Followup to #9832
7 years ago
2057177184
Make enums into implicit char
7 years ago
e28e3bb532
Move extended_axis_codes to PROGMEM
7 years ago
Luc Van Daele