3354 Commits (04fa9d4f47b6af7a55b80369950cd8ac15f3a793)

Author SHA1 Message Date
AnHardt 8d1eeff021 Fix status LEDs update when reinitializing the display
Fix status LEDs update when reinitializing the display

By using the regular update function during init.

Fixing #2683
9 years ago
Richard Wackerbarth 5a54204f72 Marlin 1.1.0 Release Candidate 3 - 01 December 2015 9 years ago
AnHardt bb4efcf603 Handle temp callbacks when THERMAL_PROTECTION_HOTENDS is not defined
by alternate definition for the callback macros
9 years ago
AnHardt 96d0d04b8f Update LCD buttons less frequently
Move slow_buttons_update into the LCD_UPDATE_INTERVAL block
lcd_implementation_read_slow_buttons() will then be executed ~10 times a
second.
9 years ago
Richard Wackerbarth e293ea57f0 Unbalanced brackets in setPwmFrequency
This is a back port of the correct in issue #248
9 years ago
AnHardt c956b52c4a Babystep Multiplier
Analog to https://github.com/MarlinFirmware/MarlinDev/pull/250 by
@RicardoGA

Restore the Babystep Multiplicator functionality and now it's available
for X/Y/Z
9 years ago
Richard Wackerbarth 956418c674 Kc is also a multi-PID parameter 9 years ago
AnHardt 33addc52a1 Suppress Z_MIN_PROBE_REPEATABILITY_TEST for DELTA and SCARA configurations (PR#2747)
For now Z_MIN_PROBE_REPEATABILITY_TEST is not possible for DELTA or SCARA
configurations.
This PR comments the feature out, where it is commented in by default.
9 years ago
AnHardt 8da2e98985 Split RAMPS 1.3 an 1.4 (PR#2741)
because of hardware differences on the SERVO0_PIN
9 years ago
AnHardt be7167ed97 Change XY formatting on LCD (PR#2740)
According to #123 negative values for XY at or below -100 are displaying incorrectly, dropping the first digit. Deltas can easily have XY values in this range. This PR adds a function to display floats/ints formatted like `_123`, `-123`, `_-12`, or `__-1` as appropriate and applies it to the XY coordinates on Hitachi displays. It also moves the Z value to the right to be consistent with the XY formatting.
9 years ago
Luis Correia e7099ea597 Fix Portuguese (Portugal) strings (PR#2700)
Align strings with release
9 years ago
Scott Lahteine 754b13d8fe Patch issue #2315 9 years ago
Scott Lahteine dbd4c17096 Init Kp, Ki, Kd to 0 9 years ago
Scott Lahteine 644c376e84 Use binary OR with endstop bits 9 years ago
Scott Lahteine 54a39d8c1a Use a ternary in qr_solve.cpp 9 years ago
Scott Lahteine 17c23bbaf3 Shorten gcode_M221 yet function the same 9 years ago
Scott Lahteine c0e791dbe9 Only look for "N" line number as first parameter 9 years ago
Scott Lahteine b4af4441c5 Clean up watchdog impl. 9 years ago
Scott Lahteine 8f16563bbd Use "defined" with LCD_PIN_BL and LCD_PIN_RESET 9 years ago
Scott Lahteine 6fa7e24af3 Use "UNUSED" to squash compiler warnings 9 years ago
Scott Lahteine d5b7c595ae Use static locals in utf_mapper.h 9 years ago
Scott Lahteine 9bdab4f3a8 Clean up "else" and other spacing 9 years ago
Scott Lahteine 9b23490f01 Clean up spacing in configs 9 years ago
esenapaj c6c37abd41 Update language_kana.h 9 years ago
esenapaj c24045475a Update language_kana_utf8.h 9 years ago
Richard Wackerbarth 25d636c9e0 Compiler issues (PR#2696) 9 years ago
AnHardt 47401ec97b MSG_EXTRUDER_SWITCHED_OFF was renamed to MSG_REDUNDANCY
in language.h, but was not renamed here. If TEMP_SENSOR_1 is enabled as redundant then
an error is thrown that MSG_EXTRUDER_SWITCHED_OFF is not defined.

Originaly by @12dstring
9 years ago
Scott Lahteine ba6a243197 DEBUG message has no parameter (PR#2671) 9 years ago
Scott Lahteine 0c7f7ebcfb Styling adjustments (PR#2668 & PR#2670)
Keep "astyled" reformatting
9 years ago
Rafa Couto b5fb7075b9 Galician (gl) language. 9 years ago
Richard Wackerbarth 7b4bdc0203 DUAL_X_CARRIAGE motor enabling
As noted by @darkjavi et.al. in #103, the E1 motor was not being enabled in planner.cpp when using DUAL_X_CARRIAGE. This patch enables and disables E1 as it should.
9 years ago
Richard Wackerbarth 91b5156b3e Marlin 1.1.0 Release Candidate 2 - 29 September 2015 9 years ago
Richard Wackerbarth 03f0edb57e Fix high LCD status screen update frequency (PR#2655) 9 years ago
KiteLab 0ad25c6665 Hint for changed behaviour of SDSUPPORT 9 years ago
Richard Wackerbarth e01f5e1ef7 Cleanup 9 years ago
Mike Cochrane 5e36b64635 SDEXTRASLOW for some SD card readers (PR#176)
Add SDEXTRASLOW which runs the SD card at SPI_QUARTER_SPEED. Quarter speed is needed for RIGIDBOT_PANEL
9 years ago
Scott Lahteine 5d65a36dee Give lcd_sd_status an UNKNOWN state (PR#180) 9 years ago
fmalpartida 0f149ea0c6 LCD home button causes repeated homing (PR#175)
Fix: increased debounce delay.
9 years ago
Scott Lahteine b825567e0f Drop www. from marlinfirmware.org (PR#175) 9 years ago
Scott Lahteine db27e67580 Apply PID_ADD_EXTRUSION_RATE to extras 9 years ago
Scott Lahteine bc50db9cf6 Implement PID_ADD_EXTRUSION_RATE 9 years ago
Scott Lahteine cffb2d457e Cleanup file formatting 9 years ago
Scott Lahteine 7ac7ddbf20 Show nozzles, heaters, and extruders numbered 1-4 9 years ago
Scott Lahteine 5bc480fee8 Fix Move E menu items 9 years ago
Scott Lahteine fc882c34a3 Init lcd_sd_status as false to force lcd_update test
Replaces #145 which is way out of date
9 years ago
Scott Lahteine e27dd5c22d Conditionalize functions that rely on SDSUPPORT 9 years ago
Scott Lahteine fabf3ae4a0 Add final Z raise after Delta probe 9 years ago
Petr Zahradnik 8c768a76a2 Create language_cz.h
Czech language translation.
9 years ago
Petr Zahradnik 5b9010965d Update language.h
Added comment for Czech language (associated with file language_cz.h).
9 years ago
Scott Lahteine 89fb778684 Fix up probe pin define and test 9 years ago
Scott Lahteine 558665cd90 Constrain Tune > Nozzle/Flow menu items 9 years ago
Scott Lahteine 9f462f0cf5 Hack to address stuttering caused by ISR not finishing in time
(PR #138)

When the ISR does not finish in time, the timer will
wrap in the computation of the next interrupt time.

This hack replaces the correct (past) time with a time not far in the future.
9 years ago
Scott Lahteine 8b3d63c423 Unify Delta XYZ homing rates
As noted in #130 allen key probe stow rate is based on homing rates,
but homing rates were left out of most delta configs. This unifies the
XYZ homing rates and applies the unified rates to allen key movements.
9 years ago
Scott Lahteine 7c72b57313 Unify manual feedrate and Fix LCD MANUAL_FEEDRATE (PR#128)
As noted by @o-lampe at https://github.com/MarlinFirmware/MarlinDev/issues/114#issuecomment-136757614 the `MANUAL_FEEDRATE` for Delta Z should be the same as XY.
9 years ago
Scott Lahteine f690b82343 Remove extra MAX_FREQ_TIME define (PR#148) 9 years ago
Scott Lahteine a4c78ae786 Add E1 pins to SENSITIVE_PINS for Dual Y or Dual Z 9 years ago
Scott Lahteine a39fadf876 Update kossel-pro example config (again?) 9 years ago
Scott Lahteine 34e0a8d848 Move Y2 and Z2 pins defines to pins.h 9 years ago
Scott Lahteine 28599c51c7 Wrap Dual Y options in a conditional 9 years ago
Scott Lahteine 11a065c0ca Remove Z2 pins overrides from Configuration_adv.h 9 years ago
Scott Lahteine f7f6b5faae Fix lcd_move_e compile error (PR#143)
Fix a compile error introduced in #98
9 years ago
Scott Lahteine 2b30e8ac99 Conditionals for ULTIPANEL without SDSUPPORT 9 years ago
Scott Lahteine 7c7a4051fe Disable SDSUPPORT by default
As noted in #133 you can’t disable `SDSUPPORT` with `MAKRPANEL`,
`PANEL_ONE`, `MINIPANEL`, or `ULTIPANEL`. This patch makes it possible
to disable `SDSUPPORT` on these controllers and then disables it by
default.

Users of these controllers will now need to enable `SDSUPPORT` in their
configurations as others currently do.
9 years ago
Eric Kuzmenko b23d765991 Added Extrude From Multiple Extruders from LCD feature 9 years ago
Christian Lefrançois 8347a9d6e4 Fix HOMING_BUMP_DIVISOR for deltas configuration
* Re-bump speed divisor should be the same for delta printer.
9 years ago
Scott Lahteine 703df2cb6c Fix error message for probe region sanity check 9 years ago
Shane Francis 4c8330c15c Trim Adjustments for Delta Configurations 9 years ago
Scott Lahteine 962120d1d2 Fix spacing in some conditional blocks 9 years ago
Richard Wackerbarth 20b4772155 Create DEBUG_LEVELING_FEATURE 9 years ago
Scott Lahteine 194f98ff95 Debug messages for homing and leveling 9 years ago
Richard Wackerbarth 6292d9e815 Rename ENABLE_AUTO_BED_LEVELING
With the introduction of the #if ENABLED(…)

reads better than
9 years ago
Richard Marko 91fd66ffba add Lulzbot TAZ4 example configuration (PR#104) 9 years ago
Wurstnase 7a275773ee remove colon in utf_mapper.h (PR#106) 9 years ago
Chris Bruner 6b4b6fa315 update for newest version of U8glib_Arduino 9 years ago
Christian Lefrançois 9897a9147c Update ABL comments (PR#95)
* Updates the auto bed leveling comments ONLY.
* Renames "Z probe" word usage in //comments and #errors properly.
9 years ago
Christian Lefrançois a7822e3ff7 Some renaming of Z_PROBE to Z_MIN_PROBE (PR#91)
* Fix a couple of renames omission and macro expansion errors.
9 years ago
Richard Wackerbarth ad90e851b3 Use a small unsigned integer type 9 years ago
Richard Wackerbarth 29b456ae07 Suppress some compiler warnings 9 years ago
Scott Lahteine 23d742bf06 Don't free the stack array plane_equation_coefficients (PR#83) 9 years ago
Scott Lahteine e3b1e08777 Patch G30 to use raise_z_for_servo (PR#73) 9 years ago
Scott Lahteine a1eb90d5c0 Save another 30 bytes in gcode_SET_Z_PROBE_OFFSET 10 years ago
Scott Lahteine 91122277f4 Reduce gcode_SET_Z_PROBE_OFFSET by 88 bytes 10 years ago
AnHardt 5707a2c3d5 indexindexIntoAB is only vald for !DELTA 10 years ago
AnHardt d8860f9ad9 Alway end at the same point
Always end at [RIGHT_PROBE_BED_POSITION, BACK_PROBE_BED_POSITION]
Regardles the evennes of auto_bed_leveling_grid_points.
10 years ago
AnHardt 4ca8f4a9a7 Always zigzag
Use the shortest way between probing-points.
10 years ago
AnHardt 3d23424121 Add array indexIntoAB[xx][yy]
and use it.
10 years ago
AnHardt e2d69f66b2 Make Z_PROBE a Z_MIN_PROBE (PR#65)
Currently we use the probe exclusively as a device to find the build platform(bed).
For the currently supported setups this means, we use it as a additional min-endstop.
A triggered when not deployed probe disturbs the homing process for max-endstops.

Rename ENDSTOPPULLUP_ZPROBE to ENDSTOPPULLUP_ZMIN_PROBE
Rename Z_PROBE_ENDSTOP_INVERTING to Z_MIN_PROBE_ENDSTOP_INVERTING
Rename Z_PROBE_ENDSTOP to Z_MIN_PROBE_ENDSTOP
Rename DISABLE_Z_PROBE_ENDSTOP to DISABLE_Z_MIN_PROBE_ENDSTOP
Rename Z_PROBE_REPEATABILITY_TEST to Z_MIN_PROBE_REPEATABILITY_TEST
Rename Z_PROBE_ENDSTOP to Z_MIN_PROBE_ENDSTOP
Adjust comments accordingly
Remove Z_MAX  check for the probe in update_endstops().

Using an delta related idea of @clefranc from #61,
extended to the general change for all setups.

Tested with Prusa i3, max-z-endstop and permanently triggered z-probe.
Worked for @clefranc's delta.
10 years ago
AnHardt 6a6e863a47 Resolve #2581 by adding a missed ';' (PR#67) 10 years ago
RicardoGA e09ff79635 Update pins_RAMPS_13.h (PR#64)
Now all ramps configuration can enable Filament sensor not only EEB
10 years ago
Fourmi e6aed7bb4e Update thermistortables for Hisens Thermistor (PR#2588) 10 years ago
Richard Wackerbarth 9d8cc24abf Continue from the line following the M999 (PR#60)
If the printer is going to accept the M999,
then it should continue from that line number.
10 years ago
wurstnase f3ab1dba54 Z babystepping for coreXY (PR#47)
only X and Y were not implemented
10 years ago
Richard Wackerbarth 35afea1c0e Restore test
PR#2572 Changed this because of faulty Boolean Logic

NOT(A OR (NOT B) OR (NOT C)) !=

(NOT A) AND ((NOT B) OR C))


Besides, the compiler should be smart enough to
optimize this without help from the programmer
10 years ago
Scott Lahteine 6af75f4b5d Squish down deprecated tests in sanity check 10 years ago
Scott Lahteine edeb58288e Use PIN_EXISTS in sanity check 10 years ago
Scott Lahteine c30b7693e0 Clean up RUMBA pins conditions 10 years ago
Scott Lahteine 46453905d6 Apply remaining ENABLED/DISABLED conditionals 10 years ago
Richard Wackerbarth b227d8c128 Supply a VERSION in a short form for displays
The long descriptor will still be available in M115
10 years ago
Richard Wackerbarth cd7828a928 This will be the 1.1.0 Release rather than 1.0.3 10 years ago
Richard Wackerbarth 4e2f5618c1 Pick up Default_version when needed 10 years ago
Richard Wackerbarth 329acc852e Canonize Option flag USE_AUTOMATIC_VERSION 10 years ago
Richard Wackerbarth 5a11d32a85 Move deprecation test to SanityCheck.h 10 years ago
Richard Wackerbarth 7bb7a52940 Bring config up-to-date 10 years ago
AnHardt 244ea2014a Boot-screen for text-displays improvements
Centred the logo for 16x4 and 20 x4.
Moved version to the bottom line
Code shrink to 704 bytes.
10 years ago
AnHardt 80f2a20842 Enable bootscreen in all Configurations 10 years ago
AnHardt 2684d061ed Scroll too long strings on bootscreen 10 years ago
AnHardt 4f46df5dab Make bootscreen configurable for the graphic displays
Saves about 473 byte of progmem and 28 bytes of RAM.
10 years ago
AnHardt 09571b7753 Boot-screen for the character displays
Uses about 488 byte of progmem and 32 byte of RAM.
For that configurable.
10 years ago
Richard Wackerbarth 866efc14fe Add Danish translations 10 years ago
Scott Lahteine 267f3479d7 Adjust spacing in pins_RAMPS_13.h 10 years ago
Scott Lahteine 56702e7bb9 Define servo pins just like other pins 10 years ago
Richard Wackerbarth 4b9d5cd352 Use lowercase names for serial instances 10 years ago
Scott Lahteine 1e2deff4fd Rename BTENABLED to BLUETOOTH
- For some reason it’s easy to forget what BT stands for, but it
doesn’t need an abbreviation.
10 years ago
Scott Lahteine 68055a5959 Include RIGIDBOT_PANEL in Conditionals 10 years ago
George Djabarov f8ed3a835d Added comment with the RigidBot Big bed size 10 years ago
George Djabarov 7deae6b6be Updated RigidBot example configuration
- The default serial baud rate of 115200
- The regular RigitBot bed size 254mm/248mm/254mm
- Single stock extruder
- Stock termistors for extruder and hotbed
- Stock Min X/Y/Z stops. Max stops not connected
- Stock 32 teth tooleys (stock axis steps)
- No auto bed leveling
- No screen
10 years ago
Scott Lahteine 5418faa1f9 Add sanity checks for old names 10 years ago
Scott Lahteine f03e063750 Rename BEEPER to BEEPER_PIN
For consistency with other pins, allowing use of `PIN_EXISTS` macro.
10 years ago
Scott Lahteine 270c766de2 SDCARDDETECT -> SD_DETECT, added docs
- `SD_DETECT_PIN` replaces `SDCARDDETECT`
- `SD_DETECT_INVERTED` replaces `SDCARDDETECTINVERTED`
- Revise the description of `SD_DETECT_INVERTED`
- Add a note about the override of `SD_DETECT_INVERTED` in
`Conditionals.h`
10 years ago
Scott Lahteine 496fc28dc3 Tweaks to pins comments 10 years ago
Scott Lahteine 8d3b74cc6e Rename SDCARDDETECT to SDCARDDETECT_PIN
- Rename the pin so it can be tested with `PIN_EXISTS`
- Fix some incorrect tests for `SDCARDDETECT`
10 years ago
Scott Lahteine 0f5ada8cbd Group the fail case in one negation (PR#2572) 10 years ago
AnHardt 7ddf1cda1d Improve condition for SERVO_LEVELING (PR#2570) 10 years ago
Richard Wackerbarth f32048b8f5 In for a penny, in for a pound 10 years ago
Scott Lahteine e944f960de Add a sanity check for old name "BEEPER" 10 years ago
Scott Lahteine 8ebf0b92be Spacing adjustments in some pins files 10 years ago
Scott Lahteine 94a796c8cc Rename BEEPER to BEEPER_PIN
For consistency with other pins, allowing use of `PIN_EXISTS` macro.
10 years ago
Richard Wackerbarth b217474eab Compiler Complaints about concatenated tokens (PR#2566) 10 years ago
Scott Lahteine 2460f82d8b Make proper distinction between BEEPER and HAS_BUZZER 10 years ago
Scott Lahteine 58cfcd4239 Overridable Options - Part 5
Apply `ENABLED` / `DISABLED` macros to files needing only a small
number of changes.
10 years ago
Scott Lahteine 5e834352a9 Overridable Options - Part 11 (PR#2563)
Apply `ENABLED` / `DISABLED` macros to EEPROM-related files.
10 years ago
Scott Lahteine bf6eb93c61 Overridable Options - Part 10 (PR#2562)
Apply `ENABLED` / `DISABLED` macros to planner files.
10 years ago
Scott Lahteine 51e89a269c Overridable Options - Part 9 (PR#2561)
Apply `ENABLED` / `DISABLED` macros to temperature-related files.
10 years ago
Scott Lahteine c35fb88094 Overridable Options - Part 8 (PR#2560)
Apply `ENABLED` / `DISABLED` macros to stepper-related files.
10 years ago
Scott Lahteine 0d8989fc14 Overridable Options - Part 7 (PR#2559)
Apply `ENABLED` / `DISABLED` macros to LCD-related files.
10 years ago
Scott Lahteine b4abb0ae7f Apply ENABLED / DISABLED to Marlin core files (PR#2558) 10 years ago
Scott Lahteine c0d7ea3e7e Overridable Options - Part 4 (PR#2556)
Apply `ENABLED` / `DISABLED` / `HAS_SERVOS` macros to pins files.
10 years ago
Scott Lahteine 4b40964064 Overridable Options - Part 3 (PR#2555)
Apply `ENABLED` / `DISABLED` macros to language-related files.
10 years ago
Scott Lahteine 32683b282b Include configurator copies of configs 10 years ago
Scott Lahteine 37d1879386 Apply overridables to Configuration files 10 years ago
Scott Lahteine 9d151bb61b servo_endstop_angles -> servo_endstop_angle 10 years ago
Scott Lahteine 9334479aeb Minor cleanup of Conditionals.h 10 years ago
Scott Lahteine 1f63293624 servo_endstops -> servo_endstop_id 10 years ago
Scott Lahteine edaaead7e0 Fix comment about SERVO_ENDSTOP_ANGLES 10 years ago
Scott Lahteine ed4a6371ad Add HAS_SERVO_ENDSTOPS to simplify conditonals 10 years ago
Scott Lahteine 70be61d416 Reset filament_size with a loop 10 years ago
Scott Lahteine ae9274be05 Fix minor compiler warnings in for loops 10 years ago
Scott Lahteine c7c8cfed6f Complete M200 output with M503
- The contents of EEPROM include filament diameters even with
Volumetric disabled. This change makes `M503` display the full
volumetric settings so that playing back the output of `M503 S0` will
fully restore them.
10 years ago
Scott Lahteine 4a58e447a1 Add array size to servo_endstop_angles (PR#2553) 10 years ago
Andrew Lenharth a0ae9e30df don't pass integer by reference, inefficient. (PR#2547) 10 years ago
AnHardt d03f037a92 Get rid of malloc() and free() (PR#2549)
Just the minimal changes to qr_solve.cpp and .h to get rid of malloc() and free().

Saves about 656 bytes of progmem (library-code)
and 22 bytes for static variables.

Should use exactly the same amount of stack as it did before on the heap.
10 years ago
Scott Lahteine 3b2b2313ff Combine if block related to SERVO_ENDSTOPS 10 years ago
Scott Lahteine 0af2a80e06 Make SERVO_ENDSTOP_ANGLES 2-dimensional 10 years ago
Richard Wackerbarth 525d0dc239 Configurator is out-of-date AGAIN (PR#2550) 10 years ago
Richard Marko dd22cbbfb8 makefile: add buzzer.cpp (PR#2479) 10 years ago
Scott Lahteine 9f48798ffd Replace ENABLED with DEFINED for SERVO_ENDSTOPS (PR#2542) 10 years ago
Richard Wackerbarth ae00fad75b Rename as M100 10 years ago
Richard Wackerbarth a401d738df There is an echo in here 10 years ago
Richard Wackerbarth ed7d45e8f5 Memory watcher 10 years ago
AnHardt d17f7ebc8a Multiply WATCH_TEMP_PERIOD by 1000UL (PR#2535)
instead of 1000.  Else we get errors with times over 32 seconds.
10 years ago
Scott Lahteine bea6739774 Don't include Z_RAISE_AFTER_PROBING if not used (PR#2527) 10 years ago
Scott Lahteine 81bba7ed88 More sanity checking for extruder requirements (PR#2531) 10 years ago
AnHardt 87a97f3724 Fix conditions for display strings 10 years ago
AnHardt aaccea0260 Shift some display only strings from language.h to lenguage_en.h
and translate them to German.
10 years ago
Scott Lahteine e4c01f1c7e Simplify init with ARRAY_BY_EXTRUDERS1 macro (PR#2507) 10 years ago
Scott Lahteine ab6f1fdf8b Move & document ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED (PR#2528)
As suggested in #2521
- Move `ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED` because `SDSUPPORT` is
also required.
- Add a note that endstops must be enabled for the feature to have any
effect
10 years ago
Richard Marko 1183c10a2e makefile: drop -q -q (much quiet) from avrdude flags
Annoying when trying to figure out if uploading
actually does something.
10 years ago
Richard Marko 0e064357f4 makefile: use /etc/avrdude/avrdude.conf on linux
No need to look for arduino specific avrdude configuration
as distributions ship their own avrdude.conf file that
is compatible with arduino.
10 years ago
Scott Lahteine bcb7d5a149 Improve sanitycheck for TEMP_SENSOR_1 10 years ago
Scott Lahteine 5b24f59401 Add sanity checks for temp sensors 10 years ago
AnHardt fd0e81b0c7 Distinguish between BUZZER and SPEAKER (PR#2513)
A speaker needs a AC or a pulsed DC to make a sound, a buzzer only needs a DC.
A buzzer has it's own resonator. It works in most cases to feed the buzzer with a pulsed DC, but the sound will not be as loud as with pure DC.

There seem to be boards where the BEEPER-pin is not able to handle a PWM. Obviously intended for a buzzer.
To make these board able to handle a speaker

* replace the PWM based tone()-function again with a on-delay-off-delay loop.

Hopefully the last time I touch the beeper code.
10 years ago
Scott Lahteine e2957df05c Shorthand for do_blocking_move_to 10 years ago
Scott Lahteine 819c5b9b50 Adjust comment on Z adjustment 10 years ago
Scott Lahteine 5a7356b6fc Patch for G29 final Z position
Include all the necessary pieces to get the final Z position after
probing the bed, and add commentary about other possible changes.
10 years ago
AnHardt 088e09e052 Add forgotten Marlin_main.cpp 10 years ago
AnHardt 8b876241bd Some more servo code tweaks
Just set up the pin. Don't move to a random position.

Simplify servo::move()
* servo::move() does not need the pin parameter - The pin is set during servo_init() with attach().
* servo::move() does not need a return value.

SERVO_LEVELING is the wrong condition to deactivate the servos.

Remove some temporary (Servo *) variables.
SanityCheck for the servo indexes.
10 years ago
Scott Lahteine b116c096bd Reduce set_homing_bump_feedrate, save 42 bytes (PR#2512)
Updates to `set_homing_bump_feedrate`:
- Move the string into Program Memory, reduce length by 31 bytes
- Use an auto to get the divisor, adjust it on error
- Set feedrate once, at the end
10 years ago
Scott Lahteine f7e7862588 Better Sanguinololu & Graphical Controller (PR#2504)
- Change suggested at
https://github.com/MarlinFirmware/Marlin/issues/2482#issuecomment-123553
266
10 years ago
Scott Lahteine a1154d4a20 Enable Y and sanity-check CoreXZ (PR#2509) 10 years ago
Scott Lahteine 932f1c109e Move servos to the top in pins_MEGACONTROLLER.h 10 years ago
Scott Lahteine 90f8ddfc1e Apply MINIPANEL to other configs 10 years ago
AndySze 00dbf69b6d add MINIPANEL defines 10 years ago
AndySze 8ac5e56934 fixed some format problems and cleaned code 10 years ago
AndySze eef595aa64 add makerlab mega controller pin configs 10 years ago
AnHardt 4e14e152fa Add Travis tests for CORXY and COREXZ 10 years ago
AnHardt 27d7d2ccab Correct bracketing for COREXY-XZ 10 years ago
Scott Lahteine 469843427d Reduce code in gcode_M81 (PR#2497) 10 years ago
Scott Lahteine c66955aaf9 Mark unchanging arrays as const (PR#2494)
The compiler may be able to optimize if it knows an array won’t be
changing.
10 years ago
Scott Lahteine 278aa15301 Add COUNT macro and apply 10 years ago
Scott Lahteine d85861d296 Move macros, add ENABLED/DISABLED, add includes 10 years ago
Scott Lahteine 17960fd2b0 Neaten up pins_MEGATRONICS.h (PR#2493) 10 years ago
Scott Lahteine aac2b9aa9d Reduce code in gcode_M84 (PR#2492)
`gcode_M84` only needs to call `finishAndDisableSteppers`, which calls
all the other functions.
10 years ago
Scott Lahteine 4971fa73f9 Add a sanitycheck error for old servo settings (PR#2491)
- Documentation solution for #2476
10 years ago
Scott Lahteine 96ace72ddc Servos attach/detach based only on servo config
Assuming #2470 fixed up the main issue.
10 years ago
Richard Wackerbarth b80a6a8d31 Correct Kossel Pro Configuration_adv (PR#2473) 10 years ago
Scott Lahteine 000a6fce46 Extract update_endstops from stepper ISR (PR#2474) 10 years ago
Scott Lahteine e83eac312e Move plan_arc next to prepare_move 10 years ago
Scott Lahteine 5c5936508d G2/G3 Arcs for Delta
- Update prepare_move_delta to take a target argument
- Add Delta support to plan_arc
10 years ago
Scott Lahteine 9f53e2f0c9 Implement COREXZ in stepper.cpp and planner.cpp 10 years ago
Scott Lahteine fa00e1d97f Explode conditions common to corexy and cartesian 10 years ago
Scott Lahteine c7dd5527b4 Add a C_AXIS and Z_HEAD to support COREXZ 10 years ago
Scott Lahteine 129f986ccf Add COREXZ option to configurations 10 years ago
Scott Lahteine 69b0490b77 Show minimal preheat options in menus (PR#2471) 10 years ago
Scott Lahteine eacfe132aa Change the name of servos[] and servo_t 10 years ago
Scott Lahteine 3b23ccd366 Patch servos code for move
- Have `Servo::attach` explicitly return -1 if it fails
- Check for -1 in `Servo::move` because `servoIndex` might be 0
- Make `attach` / `detach` calls conditional on `SERVO_LEVELING`
- Move `SERVO_LEVELING` define to `Conditionals.h`
10 years ago
Richard Wackerbarth 54ddc1d417 Simplify DRY RUN (PR#2358)
Elsewhere DRYRUN turns off the heating elements
and ignores constraints on them.

Here, whenever motion is entered into the planner,
if DRY RUN is set, we instantly act as if the E_AXIS
is in the desired final position.
10 years ago
Scott Lahteine 944090c19c Optimize lsDive logic 10 years ago
Scott Lahteine 417706e578 Include space for the terminating nul in lsDive 10 years ago
Scott Lahteine f3c1a6b19c Reduce lsDive stack usage to the minimum 10 years ago
Patrick Bogen fba4e6241b Specify print format for reporting invalid tmp_extruder (PR#2465) 10 years ago
AnHardt d15d869267 Rename axis_is_at_home() to set_axis_is_at_home() (PR#2464)
to make clear - it's not a question but an order.
10 years ago
Scott Lahteine f209b755a5 Move the Z probe as far as needed to trigger the switch (PR#2461) 10 years ago
Scott Lahteine 0f1df62389 Fixup comments in code_seen 10 years ago
Scott Lahteine 2945eb6650 Call code_seen only once per parameter 10 years ago
Scott Lahteine b742af2e2a Move Y_STOP_PIN for Printrboard with SD (PR#2420) 10 years ago
Scott Lahteine baa9199973 Define extern delta only for delta 10 years ago
Scott Lahteine 77e80ef367 Require extruders for thermal code 10 years ago
Scott Lahteine 3bde4f4855 Require temp sensor for bed thermal protection 10 years ago
Scott Lahteine 82a3ed2f9a Cleanup and dev notes in Marlin.h 10 years ago
Scott Lahteine db23b9b184 Minor tweak to M204 code (PR#2457) 10 years ago
Scott Lahteine 81d42406b7 Move braces in homeaxis to prevent a hanging else (PR#2451) 10 years ago
Scott Lahteine 552a327df8 Fix lsDive filename stack overrun (PR#2449) 10 years ago
AnHardt a6628f12cc Eliminate the further use of the pin-parameter 10 years ago
AnHardt 8504992e9f Remove the additional pin variable in Servo.cpp
as sugested by @c-born
inhttps://github.com/MarlinFirmware/Marlin/issues/1885#issuecomment-92618240
10 years ago
AnHardt ed6598adf5 Corrected Bed Height vs. Bed Topology for verbosity > 3
and cleaned out some tabs.

Everything else is a rebased PR#2017 as proposed by @CptanPanic
10 years ago
brian 62302ceb9e Add calculation of difference between auto-correct bed level plane, and measured topo map. 10 years ago
Scott Lahteine de25a48dec Remove PID examples from preconfigured configs 10 years ago
Scott Lahteine 7456710a1f Update configs formatting 10 years ago
Scott Lahteine 391386dd94 Update configs for new servo deactivation 10 years ago
AnHardt 5243d8b523 Deactivate DEACTIVATE_SERVOS_AFTER_MOVE by default 10 years ago
AnHardt 49609f6c14 Activate the new servo.move() function
by replacing the sequences (attach, write, delay, detach), and their conditions with the new function in Marlin.main.cpp
and removing the old configuration in the ABL part of Configuration.h
10 years ago
AnHardt 40b6edcad7 Introduce DEACTIVATE_SERVOS_AFTER_MOVE in Configuration.h
DEACTIVATE_SERVOS_AFTER_MOVE is ought to replace PROBE_SERVO_DEACTIVATION_DELAY.
But it will work on all servo moves, not only the probe servo moves.
10 years ago
AnHardt 2ddb2a2be9 Add Servo::move() to servo.cpp
move(pin, angel) - Sequence of attach(pin), write(angel),
                   if DEACTIVATE_SERVOS_AFTER_MOVE is defined waits SERVO_DEACTIVATION_DELAY, than detaches.

As we have jitter on the servos during moves of the steppers, and detaching them improves this behaviour,
the usual sequence to handle a servo movement is:
attach(pin)
write(angel)
delay(until the servo finished the move)
detache()

Here a function to handle the complete sequence.
10 years ago
mkile 8a01e5fb7a Update Russian translation (PR#2443)
Slightly updated translation.
10 years ago
Richard Wackerbarth e83575537a Compiler defines USBCON for USB devices (PR#2433) 10 years ago
ayberkozgur 7268d46508 Always calculate extruder temperature PID d term (PR#2432) 10 years ago
Scott Lahteine 87a872e103 Use st_get_position_mm where possible (PR#2411) 10 years ago
Scott Lahteine 2e0da8abdc Allow N to take a negative argument (PR@2402) 10 years ago
Scott Lahteine 447dbd6fa5 Add STEPPER_RESET_PIN support 10 years ago
Scott Lahteine a0351bdb73 Remove STEPPER_RESET_FIX option 10 years ago
Scott Lahteine 6b1b8cb2b3 Also nullify spaces before the checksum asterisk (PR#2409) 10 years ago
Scott Lahteine 8e61314323 Use RIGIDBOT_PANEL for consistency with online docs 10 years ago
Scott Lahteine 4b204da3c1 Cleanup of pins_RAMPS_13.h 10 years ago
Scott Lahteine 536f86e896 RigidBot CONTROLLERFAN_PIN in Configuration_adv.h 10 years ago
Scott Lahteine f068e46661 RigidBoard include for pins.h 10 years ago
Scott Lahteine 9ebcae496d RIGIDBOARD / RIGIDPANEL 10 years ago
Scott Lahteine c3c605c658 Move note about LiquidTWI2 to Configuration.h (PR#2406) 10 years ago
Scott Lahteine 4e9d658141 Prevent a hanging SERIAL_ECHO_START in M111 10 years ago
Scott Lahteine bc0fdbe88e Use SERIAL_EOL in SERIAL_PROTOCOLLN macros 10 years ago
Scott Lahteine d78ebbc0e9 Remove unused MSG_OK_B and MSG_OK_T 10 years ago
Scott Lahteine 6b494c1535 Use disable_all_heaters in M111 10 years ago
Scott Lahteine 15190d40df Add extra EOL after M111 10 years ago
AnHardt 0e1cf78f5c Remove code for testing if probing range is too small (PR#2390)
becaue it is over-restrictive and superseeded by the now working tests
if the probe-recktangle can be reached. See iss#2366
10 years ago
AnHardt d421f5250d Correct the sign of zprobe_zoffset for G29 (PR#@391)
Sign flipped with #2167.
See also comments
https://github.com/MarlinFirmware/Marlin/issues/2040#issuecomment-118568355
and following.
10 years ago
Scott Lahteine 52fcc743ab Replace "target" with "destination" in M600 (PR#2374)
- Also fix a bug in `M600` where `Z_MAX_ENDSTOP_INVERTING` is being
used as the index into the `destination[AxisEnum]` array.
10 years ago
Scott Lahteine a5033c3652 Enable LCD_PIN_RESET if it exists (PR#2375) 10 years ago
AnHardt 23c8c5348f Z-height fix V2b (PR#2351)
here the other two occurences of `Z_PROBE_OFFSET_FROM_EXTRUDER` are
replaced with `zprobe_zoffset`.
10 years ago
Todd Swindoll a111fbbd0a z-probe offset fix (PR#2361)
verified via 1.0.2 tag that compiles by multiple people,
credit for the fix goes to paulusjacobus for the initial find and
sniffle for the correction so M851 works.
10 years ago
Scott Lahteine 42465ee444 Cleanup of comments & spacing 10 years ago
Scott Lahteine 9682ed455e Fix comment on M83, add comment to prepare_move 10 years ago
Scott Lahteine bb44fe17cf Fix typo in buzzer.h endif (PR#2337) 10 years ago
AnHardt 36746143a1 Correct output of M48 (PR#2336)
n_samples is an uint8_t .
Got printouts like:
50 of 2  ...
10 years ago
Scott Lahteine f6ca5a8da8 Allow "M110 N123" without a checksum 10 years ago
Scott Lahteine aaad65ff5d Include a comment documenting M110 10 years ago
Scott Lahteine 862c72b030 Put the mandatory test of gcode_N first 10 years ago
Scott Lahteine 30976f9773 Allow M110 to handle a second N argument 10 years ago
Scott Lahteine d135b15bb8 Init all endstop bits to 0 (PR#2332) 10 years ago
Scott Lahteine 5ccb1c9e7d Use millis for M600 audio feedback interval 10 years ago
Scott Lahteine fb16a83b8a Cleanup M600 documentation comments 10 years ago
Scott Lahteine 97ec224d72 Replace target with destination in M600 10 years ago
Scott Lahteine 4ce9ddbb74 Check the temperature before filament change 10 years ago
Jaime van Kessel b8b5762e55 Update Ultimaker URL 10 years ago
Jaime van Kessel d5bfbf5a59 Added correct dutch translation for calibrate. 10 years ago
Scott Lahteine 149c474e55 Updated Russian language (PR#2325)
Gleaned from
https://github.com/MarlinFirmware/Marlin/commit/4ac14a7e5fa8e6e395436664
8976eafd1ae220ae
10 years ago
AnHardt 722829b058 Move buzzing code to buzzr.h & buzzer.cpp (PR#2307)
at least the lcd independent part from Marlin_main.cpp.
10 years ago
AnHardt c461975140 Rename and repair MELZI_1284 (PR#2301)
to MELZI_MAKR3D.

Fix for #2288
As the normal MELZI also can have a 1284.
10 years ago
schlotzz 1e9cf905c7 Enable ZigZag AutoBedLeveling on Deltas (PR#2273)
ZigZag has been disabled by fault due to do_topography_map
10 years ago
Scott Lahteine ec93383ec8 Add SanityCheck for bed probe position settings (PR#2282) 10 years ago
Scott Lahteine dc40a5f6e0 Patch up more outdated config lines 10 years ago
Scott Lahteine 98c9111a7d Update delta configs with latest settings 10 years ago
Scott Lahteine e6baf8afd9 Fix up allen key settings in delta configs 10 years ago
Scott Lahteine 3b293fc5d1 Move Delta settings lower in delta files 10 years ago
Scott Lahteine df21857583 Move extruder offset settings next to extruders setting 10 years ago
Scott Lahteine 2dd1859247 Cleanup spaces and comments in configs and conditionals 10 years ago
Scott Lahteine a274769f4f Clean up spacing and comments
Also clean up some trailing spaces in a few other sources
10 years ago
Scott Lahteine d3bce05d54 Fix up spacing for filament sensor values 10 years ago
Scott Lahteine b4b10a57fe Fix configurator section directives and values lists 10 years ago
Scott Lahteine bba14dcbe6 Move Z Safe Homing point to the middle of the movement range 10 years ago
Scott Lahteine 318318b02f Add pins_RAMPS_13_EFB.h to reduce redundancy 10 years ago
Scott Lahteine 346c8b339b Remove a test from pins_RAMPS_13.h
- Add 3 new lines to `pins.h` to remove 2 redundant tests in
`pins_RAMPS_13.h`
10 years ago
AnHardt b93cddfcc9 Add lost MKS_BASE to pins.h (PR#2297) 10 years ago
AnHardt 6ab7b560af Rework buzzing (PR#2296)
by:
Moving HAS_LCD_BUZZ macro to Coditionals.h
Renaming HAS_LCD_BUZZ to HAS_BUZZER to make clear is has nothing to do with the lcd.
Removing the ULTRALCD condition.

Moving declaration of lcd_buzz() out of the ULTRA_LCD block in ultralcd.h
Moving definition of lcd_buzz() out of the ULTIPANEL block in ultralcd.cpp
Renaming lcd_buzz() to buzz() to make clear is has nothing to do with the lcd.

All buzzing code is now only dependent on the existence of a BEEPER-pin or the definition of a LCD_USE_I2C_BUZZER.

To do: Check the conditions for the BEEPER-pin in all pin-files.
10 years ago
Scott Lahteine 29122db2fa Fix ULTRA_LCD spelling in HAS_LCD_BUZZ 10 years ago
Scott Lahteine 1d94d098bf Formatting tweaks as part of fixing issue 1497 10 years ago
Scott Lahteine e602c28ad9 Set auto fan pins to OUTPUT during init
Fixes the problem of these pins being left in INPUT state, as described
in #1497
10 years ago
Scott Lahteine 90f858aa85 Use translated strings for axis movement (PR#2280)
Suggest we use the translated strings here. They use (except for
German) the phrasing “Move X” instead of just the axis letter, but they
should fit the available space. The “Extruder” string would be the
same, except it will be translated.
10 years ago
Scott Lahteine e2a4a83586 Don't re-apply Z_RAISE_BETWEEN_PROBINGS in probe_pt (PR #2281) 10 years ago
Scott Lahteine 6b1b3adaf0 Consistent punctuation in SanityCheck errors (PR#2283) 10 years ago
MagoKimbra eb81982fcd Fix error next command in autotune (PR#2274)
Now send only temperature for T or B, but not send OK.
Host interprets the line to show the right temperature, but not in
response to M105 then stop and send commands until it ends the autotune.
10 years ago
AnHardt 55b23c896a Optimise out_of_range_error() (PR#2265)
by avoiding the strncopy()
10 years ago
filipmu b0860adab6 Fix volumetric multiplier display for filament sensor (PR#2264)
The volumetric multiplier display needs to be multiplied by 100 in order to make it an integer for display purposes.
10 years ago
AnHardt 45642b7fe8 Respect DISABLE_AXIS settings (PR#2216)
when DEFAULT_STEPPER_DEACTIVE_TIME is over
instead of simply turn off all.
10 years ago
wurstnase c85a486445 make the dual z-endstop optional (PR#2277)
it's disabled by default
10 years ago
Scott Lahteine 962b107341 Prevent current_command_args from bypassing nul (PR#2270) 10 years ago
Richard Wackerbarth 06ae832276 Deprecate Support for Arduino IDE < 1.0.5
Note that newer versions of the IDE can still
be made to support compilation for the older boards.
10 years ago
Scott Lahteine ff6081be3a Parse N[0-9]+[ ]* differently (PR #2263)
More general solution to skip N[0-9]+[ ]* in the parser as in #2218
10 years ago
Scott Lahteine aad121864e Include "Z" in M851 report 10 years ago
Scott Lahteine 96a3fba8ac Reverse the sign of zprobe_zoffset
- When editing on the LCD, minus now means below the nozzle
- Stores the opposite sign in EEPROM, so bumped to “V20”
10 years ago
fmalpartida f92907183c Updated SAV MkI pin header. 10 years ago
Richard Wackerbarth 58941e543e ELB_FULL_GRAPHIC_CONTROLLER_SDCARDDETECTINVERTED removed
#defining something just to define something else doesn’t
make sense

If you want SDCARDDETECTINVERTED, just define it yourself.

If the previous code was intended to define, undefined and then again define the term, that code is improper.
10 years ago
CONSULitAS 788eb6e647 planner.cpp: remove tab
planner.cpp: single evil and hidden tab removed ♻️ 😏
10 years ago
CONSULitAS 3a5963c0e7 Configuration_adv.h: Add FAN_MIN_PWM for slow fan stopping issue …
* all Configuration_adv.h: Add #define FAN_MIN_PWM for slow fan stopping
issue
* for K8200: uncommented with tested (and working) values
10 years ago
CONSULitAS e55e65d1e4 planner.cpp: Add FAN_MIN_PWM for slow fan stopping issue …
@CONSULitAS

planner.cpp: Add FAN_MIN_PWM for slow fan stopping issue (V2.1 with
macro and linear scaling)

@thinkyhead thanks for idea on linear scaling
10 years ago
paclema 8d295547be * Auto filament change on CHANGEFILAMENT feature. Now you can activate this option that extrude filament until you press the button. 10 years ago
atfield90 6d0e91328d Renamed Board_megatronics_1 to Board_minitronics 10 years ago
atfield90 c4a2e5ac23 Renamed Pins_megatronics_1 to Pins_minitronics 10 years ago
atfield90 2076906aaa Renamed Pins_megatronics_1 to Pins_minitronics 10 years ago
tonokip 10733a2bb0 added minirambo pin definitions. V2 10 years ago
Richard Wackerbarth 303d47228e Define Probe Path in new format 10 years ago
Richard Wackerbarth ad09d6a60f 3 Step Allen Key Probe 10 years ago
Richard Wackerbarth 8359cdf01d Check compatibility for Teensy-based processor
The instruction say to set a #define in fastio.h
However, that value is not included before this test.
10 years ago
Ed Boston 08968c29bb Adding ELB_FULL_GRAPHIC_CONTROLLER_SDCARDDETECTINVERTED to Examples 10 years ago
Ed Boston fed18bcc20 Removed SDSLOW for ELB_FULL_GRAPHIC_CONTROLLER
Hardware changes has removed the need for this option.
10 years ago
Ed Boston b94a0e1501 Added ELB_FULL_GRAPHIC_CONTROLLER_SDCARDDETECTINVERTED
The new define allows the sd card detect to be inverted or not from
Configuration.h
10 years ago
Ed Boston bc205c76a3 SDCARDDETECTINVERTED problems
Fixed an error where SDCARDDETECTINVERTED was being defined/undefined
improperly
10 years ago
AnHardt e400fce271 Merge pull request #2221 from MagoKimbra/Dryrun
Insert Debug DRYRUN Repetier Host compatible
10 years ago
AnHardt 163a9ff58e Merge pull request #2230 from AnHardt/psm
Fix thermal protection state machine target temp. V2
10 years ago
AnHardt c3fe6e61ae Merge pull request #2229 from AnHardt/position-out-of-range
Fix out_of_range_error()
10 years ago
MagoKimbra 4db8d2def4 Moved MSG_DEBUG in language.h 10 years ago
AnHardt b7e9ba7591 Back to 1.0.3 dev - for now 10 years ago
AnHardt d1f4471000 Merge pull request #2146 from Wackerbarth/Versioning
Versioning
10 years ago
AnHardt b1404a0743 fix thermal protection state machine target temp. V2
If the target temperature is changed then it would always stay in the reset state.
Thanks to @tonokip.

Replaces #2119
10 years ago
AnHardt 17b0ec84ed Fix out_of_range_error()
For sprintf_P() the first parameter has to be a `char*` not `const char*`.
10 years ago
AnHardt 35af5ef23e Merge pull request #2225 from Wurstnase/naming
consistency name for multiplier
10 years ago
wurstnase e7e964432b consistency name for multiplier
replace extruder_multiply with extruder_multiplier
like feedrate_multiplier or volumetric_multiplier
10 years ago
AnHardt d4c6fc5d0a Merge pull request #2223 from AnHardt/dualz-semicolon
Add a semicolon to make Z_DUAL_STEPPER_DRIVERS compile again.
10 years ago
AnHardt 0d9d21d15f Add a semicolon to make Z_DUAL_STEPPER_DRIVERS compile again. 10 years ago
MagoKimbra 76306f9073 Insert Debug DRYRUN Repetier Host compatible 10 years ago
MagoKimbra 881146bc22 Fix problem Width Cura 10 years ago
fmalpartida 11e3f3375d Merge commit '764e61708b8e73410c7819d59c4970d7089ca6f5' into bugFixing
Updated LCD wiki location.
10 years ago
Alexey Shvetsov a8670b66a7 Update ru translation
Signed-off-by: Alexey Shvetsov <alexxy@gentoo.org>
10 years ago
fmalpartida 93da52d011 Added support for OLED SSD1306 I2C based LCDs. 10 years ago
Wurstnase 9c09967803 Merge pull request #2149 from Wurstnase/enstop_bits
faster compare
10 years ago
wurstnase 0f3f7d6835 clean up double endstops 10 years ago
AnHardt 9d2a980bcf Merge pull request #2170 from thinkyhead/beep_M600_elsewise
Slight size reduction by adding idle()
10 years ago
AnHardt 2728dc0606 Merge pull request #2194 from thinkyhead/reduce_strings
Redo "invalid extruder" to save 304 bytes
10 years ago
Scott Lahteine be5236e839 Reduce setTargetedHotend by removing the switch 10 years ago
Scott Lahteine 06f401e7e5 Redo "invalid extruder" to save 264 bytes
- Use `setTargetedHotend` in `M200`, as with other commands that use
`T` for the extruder
- Synthesize the "invalid extruder" message, obviating several long
strings
10 years ago
Scott Lahteine 1a882bcc2e Merge pull request #2193 from thinkyhead/ignore_unrecognized_commands
Ignore unknown commands if they start with G, M, or T
10 years ago
Scott Lahteine a672872717 Merge pull request #2187 from AnHardt/MAX6675M105
Print active extruder with M105 for MAX6675
10 years ago