abf9696db1
Loop fan-pins based on array size
8 years ago
e88575c8ec
Init next_auto_fan_check_ms to zero
8 years ago
b63d70b186
Fix serial output for MBL, M303
8 years ago
b7b5b50a84
Throw bed min temp error only if heating
8 years ago
d3ba878f70
Drop intermediate float in HEATER_0_USES_MAX6675 test
8 years ago
3e8f9ecd1c
Extend min/max_temp_error for the bed
8 years ago
aa9b52b2e7
MISO is an input
8 years ago
9ab94bd2c1
fix-babysrepping
8 years ago
63fd1f49a6
PID_EXTRUSION_SCALING, disabled by default
8 years ago
e4942d2163
Switch SD2cadrLib to fastio
...
Replace all fastDigitalRead/Write() with READ/WRITE()
Define SCK_PIN, MISO_PIN, MOSI_PIN in pins.h if not already defined in the pins_*.h files.
Remove these conditional pin definitions from the pin-files. They are now always defined.
Define separate sets of SPI-pins for AT90USB with and without Teensy support in fastio.h.
Likely this was the main reason for all that confusion about the AT90USB-SPI pins.
8 years ago
2d378fac1b
No need to include thermistortables.h in Configuration.h
8 years ago
d8f2876753
Replace some float division with multiplication
8 years ago
f8b5749235
Replace division in planner with multiplication
8 years ago
3ebad4e020
Moves all global enums to a central file
8 years ago
c2c8ab4698
Follow-up the PR #4278 (Fixups for PID_ADD_EXTRUSION_RATE and HOTENDS==1)
8 years ago
cdd77d23bb
Neaten up temperature member data
8 years ago
d4c68279c8
Add "P" parameter to M302
8 years ago
11dcbae7a2
Only a single E axis. Can tool-change reseed position[E_AXIS]?
8 years ago
182c8d7f8f
Dyze High Temp Thermistor Support
8 years ago
ee0983ab57
Further reduction when HOTENDS == 1
8 years ago
b72238f406
Invariant get_pid_output with HOTENDS < 2
8 years ago
a129078927
Add an emergency-command parser to MarlinSerial (supporting M108)
...
Add an emergency-command parser to MarlinSerial's RX interrupt.
The parser tries to find and execute M108,M112,M410 before the commands disappear in the RX-buffer.
To avoid false positives for M117, comments and commands followed by filenames (M23, M28, M30, M32, M33) are filtered.
This enables Marlin to receive and react on the Emergency command at all times - regardless of whether the buffers are full or not. It remains to convince hosts to send the commands. To inform the hosts about the new feature a new entry in the M115-report was made. "`EMERGENCY_CODES:M112,M108,M410;`".
The parser is fast. It only ever needs two switch decisions and one assignment of the new state for every character.
One problem remains. If the host has sent an incomplete line before sending an emergency command the emergency command could be omitted when the parser is in `state_IGNORE`.
In that case the host should send "\ncommand\n"
Also introduces M108 to break the waiting for the heaters in M109, M190 and M303.
Rename `cancel_heatup` to `wait_for_heatup` to better see the purpose.
8 years ago
bd491818d6
Reduce storage requirements for strings, make some PGM
9 years ago
7b2fadd598
Apply some fixes from Andreas
...
Derived from
https://github.com/AnHardt/Marlin/commit/6e8ede8c694fa4d9e3c769840b09d56
7f8d8e0dd
9 years ago
dcb8ec32ee
Fix compile error with watch_bed_next_ms
9 years ago
ee5be92206
Fix broken DISABLE_HEATER macro
9 years ago
e2d4919c01
Merge pull request #3991 from thinkyhead/rc_axis_units
...
Rename some vars to clarify their relationship to acceleration
9 years ago
72c6f2923f
axis_steps_per_unit => axis_steps_per_mm
9 years ago
3c68be79dc
Throw an error in PID_autotune for E < -1
9 years ago
cd441ce652
SINGLENOZZLE: EXTRUDERS versus HOTENDS
9 years ago
3fd9b331f0
Merge pull request #3924 from thinkyhead/rc_statics_temperature
...
Apply static to Temperature class
9 years ago
78fb02a5ad
Apply static to Temperature class
9 years ago
fad7680605
Slower SPI speed for MAX31855
9 years ago
0c7c45063b
PID_ADD_EXTRUSION_RATE based on MarlinKimbra
9 years ago
8218558953
Update comments, rename next_ping_ms, followup to #3797
9 years ago
58339aea5f
Merge pull request #3769 from jbrazio/bugfix/iteration-invokes-undef-behavior
...
Bugfix: iteration invokes undefined behavior
9 years ago
2f14934c65
Fix checkExtruderAutoFans
...
Make sure to only set the fan state once when extruders share a fan
9 years ago
ecd490ed49
Bugfix: iteration invokes undefined behavior
9 years ago
4d6bb52b26
Don't try to enable unused auto fans
...
Addressing #3743
9 years ago
9b92bb8f31
Set the initial state based on target temperature
9 years ago
6b13c430ae
The TRReset state is not needed with fall-through
9 years ago
c2522ce1f5
Fallthru in thermal runaway test when TRState changes
9 years ago
9186be7b83
Fix compilation error in debugging code
...
Fix compilation error in Thermal Runaway debugging code
9 years ago
084f6b5b44
Temperature singleton class
9 years ago
85e732d5fd
Fix BABYSTEPPING, add it to Travis test
9 years ago
60c6efb75c
Merge pull request #3653 from thinkyhead/rc_bed_temp_watch_merge
...
Introduce temp watch protection for the bed
9 years ago
908229dbb3
Introduce temp watch protection for the bed
...
When setting the bed temp via M140/M190 if the thermistor does not read an increase of WATCH_BED_TEMP_INCREASE degrees by WATCH_BED_TEMP_PERIOD seconds then it will throw "Error:Heating failed, system stopped! Heater_ID: bed" and call the kill() function.
Conflicts:
Marlin/Configuration_adv.h
9 years ago
96f51f400f
Planner singleton class
9 years ago
5e4e535ce8
Stepper and Endstops as singleton objects
9 years ago
3db5a75f30
Merge pull request #3568 from thinkyhead/rc_various_fixes
...
General code cleanup, improved naming, etc.
9 years ago
8a2587f017
Read size for MAX6675 from sizeof(max6675_temp)
9 years ago
ba84d8d091
Allow setting PIDTEMP and PIDTEMPBED together or apart
9 years ago
a26d70e932
Apply indentation to gcode_M303, PID_autotune
9 years ago
ba66336503
Output error for disabled M303
9 years ago
8429ae6beb
Merge pull request #3525 from thinkyhead/rc_fix_pid_params_per_extruder
...
Fix broken PID_PARAMS_PER_EXTRUDER
9 years ago
d4a848c72a
Fix broken PID_PARAMS_PER_EXTRUDER
...
As noted by @FalloutBe in #3519
9 years ago
832e1c1f2a
Follow-up and fix for the PR #3453(ELAPSED / PENDING for rollover-safe time checking)
...
・Add more "UL" suffix
・Restore removed "UL" suffix
9 years ago
c5a8755cc0
Fix a messed up ELAPSED instance
9 years ago
386140f361
Test time difference in safe way
9 years ago
d7cbb2eec9
Merge pull request #3403 from jbrazio/feature/stopwatch
...
Print job timer rework
9 years ago
865dcf3fb4
Fix FILAMENT_WIDTH_SENSOR measurement
...
Only measure and store filament width when E is going forward.
9 years ago
eb61051556
Rework the print job timer to use the stopwatch class
9 years ago
d24f14a799
Add HAS_TEMP_HOTEND define
9 years ago
1a79b13b7a
FILAMENT_SENSOR -> FILAMENT_WIDTH_SENSOR
9 years ago
ab412a2153
PIDTEMPBED on #endif
9 years ago
5955a3063f
Sanity check PIDTEMPBED plus BED_LIMIT_SWITCHING
9 years ago
0da744b7b0
Further cleanup of comments, partial Doxygen-style
...
Following up on #3231
9 years ago
5e5d250832
Added gplv3 header to all Marlin files
9 years ago
04fa9d4f47
Make Autotune options into Menu Edit Items
9 years ago
e3f583a3be
Fixes for PID AutoTune from menu
...
Fixes for #3189
Setting a temp is still missing
9 years ago
3b3e8a02b5
Initial implementation of PID Autotune Menu Items
...
Adds the parameter U to M303. If U1 is included , it will use the
PID-values from the auto-tune.
9 years ago
06332f20be
Merge pull request #3113 from jbrazio/bugfix/3061-stop-print-time-counter
...
Stop print timer with M105/M109
9 years ago
4bbea5124d
Support for multiple PWM fans
9 years ago
2ef49a9d53
Wrap DEFAULT_Ki, DEFAULT_Kd, PID_dT
...
Addition to #3140
9 years ago
1c384930f3
Merge pull request #3140 from thinkyhead/rc_fix_macro_expansion
...
Wrap macros to prevent bad expansions
9 years ago
30c3a21d1f
Merge pull request #3112 from thinkyhead/rc_support_MAX31855
9 years ago
f9ded2a7c4
Wrap macros to prevent bad expansions
9 years ago
a645860431
All print timer related activity now uses print_job_start(), print_job_timer() or print_job_stop()
9 years ago
81aab828e2
Fix a "Heating failed" error
...
Addressing #3085 . If the target_temperature is set directly it never invokes or disables the timer set in `start_watching_heater`, so after _stopping a print_ or turning off _all heaters_ you could get a “Heating failed” error.
9 years ago
27f244ba2c
Support MAX31855 as Temperature Sensor -3
9 years ago
986b508ff7
Print timer now stops when it sees the last extruder temperature being shutdown
9 years ago
ff13070b59
Use _BV macros, patch up others
9 years ago
209f5f21e0
Use macros where possible
...
Apply `constrain`, `NOMORE`, `NOLESS` and `CRITICAL_SECTION` macros
wherever possible.
9 years ago
3a3d358df9
Fix Printrboard with LCD (redo)
...
Based on #2860 - rebased for RCBugFix
9 years ago
0631541166
Fix disable_all_heaters() for MAX6675
9 years ago
57da1b8497
Host parseble output for M109, M190 and M303
...
Make the output of M105 more similar to Repetier.
Make the text-print pert of M105 an extra function to make it reusable. `print_heaterstates()`
Use `print_heaterstates()` in M019, M190 and M303
9 years ago
956418c674
Kc is also a multi-PID parameter
9 years ago
dbd4c17096
Init Kp, Ki, Kd to 0
9 years ago
b4af4441c5
Clean up watchdog impl.
9 years ago
9bdab4f3a8
Clean up "else" and other spacing
9 years ago
25d636c9e0
Compiler issues (PR#2696)
9 years ago
47401ec97b
MSG_EXTRUDER_SWITCHED_OFF was renamed to MSG_REDUNDANCY
...
in language.h, but was not renamed here. If TEMP_SENSOR_1 is enabled as redundant then
an error is thrown that MSG_EXTRUDER_SWITCHED_OFF is not defined.
Originaly by @12dstring
9 years ago
0c7f7ebcfb
Styling adjustments (PR#2668 & PR#2670)
...
Keep "astyled" reformatting
9 years ago
bc50db9cf6
Implement PID_ADD_EXTRUSION_RATE
9 years ago
51e89a269c
Overridable Options - Part 9 (PR#2561)
...
Apply `ENABLED` / `DISABLED` macros to temperature-related files.
9 years ago
d17f7ebc8a
Multiply WATCH_TEMP_PERIOD by 1000UL (PR#2535)
...
instead of 1000. Else we get errors with times over 32 seconds.
9 years ago
e4c01f1c7e
Simplify init with ARRAY_BY_EXTRUDERS1 macro (PR#2507)
9 years ago
77e80ef367
Require extruders for thermal code
9 years ago
3bde4f4855
Require temp sensor for bed thermal protection
9 years ago
7268d46508
Always calculate extruder temperature PID d term (PR#2432)
9 years ago
Scott Lahteine