|
|
|
@ -2798,84 +2798,124 @@ void Temperature::tick() {
|
|
|
|
|
if ((do_buttons ^= true)) ui.update_buttons();
|
|
|
|
|
|
|
|
|
|
/**
|
|
|
|
|
* On each call to the ISR one sensor is Sampled and
|
|
|
|
|
* the next sensor is Prepared.
|
|
|
|
|
* One sensor is sampled on every other call of the ISR.
|
|
|
|
|
* Each sensor is read 16 (OVERSAMPLENR) times, taking the average.
|
|
|
|
|
*
|
|
|
|
|
* Sensors are read 16 (OVERSAMPLENR) times and the
|
|
|
|
|
* final reading takes the average.
|
|
|
|
|
* On each Prepare pass, ADC is started for a sensor pin.
|
|
|
|
|
* On the next pass, the ADC value is read and accumulated.
|
|
|
|
|
*
|
|
|
|
|
* Extra do-nothing passes may exist when there are
|
|
|
|
|
* only a few sensors. This is set by MIN_ADC_ISR_LOOPS.
|
|
|
|
|
*
|
|
|
|
|
* The timing of this ISR gives ADCs 0.9765ms to charge up.
|
|
|
|
|
* This gives each ADC 0.9765ms to charge up.
|
|
|
|
|
*/
|
|
|
|
|
#define ACCUMULATE_ADC(obj) do{ \
|
|
|
|
|
if (HAL_ADC_READY()) \
|
|
|
|
|
obj.sample(HAL_READ_ADC()); \
|
|
|
|
|
else \
|
|
|
|
|
next_sensor_state = adc_sensor_state; \
|
|
|
|
|
if (!HAL_ADC_READY()) next_sensor_state = adc_sensor_state; \
|
|
|
|
|
else obj.sample(HAL_READ_ADC()); \
|
|
|
|
|
}while(0)
|
|
|
|
|
|
|
|
|
|
#define NEXT_ENUM(A) (typeof(A))(int(A) + 1)
|
|
|
|
|
#define NEXT_ADC_STATE(N) ((N) >= SensorsReady ? StartSampling : NEXT_ENUM(N))
|
|
|
|
|
|
|
|
|
|
// Assume the machine will go on to the next state
|
|
|
|
|
ADCSensorState next_sensor_state = NEXT_ADC_STATE(adc_sensor_state);
|
|
|
|
|
ADCSensorState next_sensor_state = adc_sensor_state < SensorsReady ? (ADCSensorState)(int(adc_sensor_state) + 1) : StartSampling;
|
|
|
|
|
|
|
|
|
|
switch (adc_sensor_state) {
|
|
|
|
|
|
|
|
|
|
default: break;
|
|
|
|
|
case SensorsReady: {
|
|
|
|
|
// All sensors have been read. Stay in this state for a few
|
|
|
|
|
// ISRs to save on calls to temp update/checking code below.
|
|
|
|
|
constexpr int8_t extra_loops = MIN_ADC_ISR_LOOPS - (int8_t)SensorsReady;
|
|
|
|
|
static uint8_t delay_count = 0;
|
|
|
|
|
if (extra_loops > 0) {
|
|
|
|
|
if (delay_count == 0) delay_count = extra_loops; // Init this delay
|
|
|
|
|
if (--delay_count) // While delaying...
|
|
|
|
|
next_sensor_state = SensorsReady; // retain this state (else, next state will be 0)
|
|
|
|
|
break;
|
|
|
|
|
}
|
|
|
|
|
else {
|
|
|
|
|
adc_sensor_state = StartSampling; // Fall-through to start sampling
|
|
|
|
|
next_sensor_state = (ADCSensorState)(int(StartSampling) + 1);
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
case StartSampling: // Start of sampling loops. Do updates/checks.
|
|
|
|
|
if (++temp_count >= OVERSAMPLENR) { // 10 * 16 * 1/(16000000/64/256) = 164ms.
|
|
|
|
|
temp_count = 0;
|
|
|
|
|
readings_ready();
|
|
|
|
|
}
|
|
|
|
|
break;
|
|
|
|
|
|
|
|
|
|
#if HAS_TEMP_ADC_0
|
|
|
|
|
case PrepareTemp_0: HAL_START_ADC(TEMP_0_PIN); break;
|
|
|
|
|
case MeasureTemp_0: ACCUMULATE_ADC(temp_hotend[0]); break;
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#if HAS_HEATED_BED
|
|
|
|
|
case PrepareTemp_BED: HAL_START_ADC(TEMP_BED_PIN); break;
|
|
|
|
|
case MeasureTemp_BED: ACCUMULATE_ADC(temp_bed); break;
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#if HAS_TEMP_CHAMBER
|
|
|
|
|
case PrepareTemp_CHAMBER: HAL_START_ADC(TEMP_CHAMBER_PIN); break;
|
|
|
|
|
case MeasureTemp_CHAMBER: ACCUMULATE_ADC(temp_chamber); break;
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#if HAS_TEMP_PROBE
|
|
|
|
|
case PrepareTemp_PROBE: HAL_START_ADC(TEMP_PROBE_PIN); break;
|
|
|
|
|
case MeasureTemp_PROBE: ACCUMULATE_ADC(temp_probe); break;
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#if HAS_TEMP_ADC_1
|
|
|
|
|
case PrepareTemp_1: HAL_START_ADC(TEMP_1_PIN); break;
|
|
|
|
|
case MeasureTemp_1: ACCUMULATE_ADC(temp_hotend[1]); break;
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#if HAS_TEMP_ADC_2
|
|
|
|
|
case PrepareTemp_2: HAL_START_ADC(TEMP_2_PIN); break;
|
|
|
|
|
case MeasureTemp_2: ACCUMULATE_ADC(temp_hotend[2]); break;
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#if HAS_TEMP_ADC_3
|
|
|
|
|
case PrepareTemp_3: HAL_START_ADC(TEMP_3_PIN); break;
|
|
|
|
|
case MeasureTemp_3: ACCUMULATE_ADC(temp_hotend[3]); break;
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#if HAS_TEMP_ADC_4
|
|
|
|
|
case PrepareTemp_4: HAL_START_ADC(TEMP_4_PIN); break;
|
|
|
|
|
case MeasureTemp_4: ACCUMULATE_ADC(temp_hotend[4]); break;
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#if HAS_TEMP_ADC_5
|
|
|
|
|
case PrepareTemp_5: HAL_START_ADC(TEMP_5_PIN); break;
|
|
|
|
|
case MeasureTemp_5: ACCUMULATE_ADC(temp_hotend[5]); break;
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#if HAS_TEMP_ADC_6
|
|
|
|
|
case PrepareTemp_6: HAL_START_ADC(TEMP_6_PIN); break;
|
|
|
|
|
case MeasureTemp_6: ACCUMULATE_ADC(temp_hotend[6]); break;
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#if HAS_TEMP_ADC_7
|
|
|
|
|
case PrepareTemp_7: HAL_START_ADC(TEMP_7_PIN); break;
|
|
|
|
|
case MeasureTemp_7: ACCUMULATE_ADC(temp_hotend[7]); break;
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#if ENABLED(FILAMENT_WIDTH_SENSOR)
|
|
|
|
|
case Prepare_FILWIDTH: HAL_START_ADC(FILWIDTH_PIN); break;
|
|
|
|
|
case Measure_FILWIDTH:
|
|
|
|
|
if (HAL_ADC_READY())
|
|
|
|
|
filwidth.accumulate(HAL_READ_ADC());
|
|
|
|
|
else
|
|
|
|
|
if (!HAL_ADC_READY())
|
|
|
|
|
next_sensor_state = adc_sensor_state; // redo this state
|
|
|
|
|
else
|
|
|
|
|
filwidth.accumulate(HAL_READ_ADC());
|
|
|
|
|
break;
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#if HAS_JOY_ADC_X
|
|
|
|
|
case PrepareJoy_X: HAL_START_ADC(JOY_X_PIN); break;
|
|
|
|
|
case MeasureJoy_X: ACCUMULATE_ADC(joystick.x); break;
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#if HAS_JOY_ADC_Y
|
|
|
|
|
case PrepareJoy_Y: HAL_START_ADC(JOY_Y_PIN); break;
|
|
|
|
|
case MeasureJoy_Y: ACCUMULATE_ADC(joystick.y); break;
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#if HAS_JOY_ADC_Z
|
|
|
|
|
case PrepareJoy_Z: HAL_START_ADC(JOY_Z_PIN); break;
|
|
|
|
|
case MeasureJoy_Z: ACCUMULATE_ADC(joystick.z); break;
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
@ -2883,123 +2923,29 @@ void Temperature::tick() {
|
|
|
|
|
#ifndef ADC_BUTTON_DEBOUNCE_DELAY
|
|
|
|
|
#define ADC_BUTTON_DEBOUNCE_DELAY 16
|
|
|
|
|
#endif
|
|
|
|
|
case Measure_ADC_KEY: {
|
|
|
|
|
if (HAL_ADC_READY()) {
|
|
|
|
|
if (ADCKey_count < ADC_BUTTON_DEBOUNCE_DELAY) {
|
|
|
|
|
case Prepare_ADC_KEY: HAL_START_ADC(ADC_KEYPAD_PIN); break;
|
|
|
|
|
case Measure_ADC_KEY:
|
|
|
|
|
if (!HAL_ADC_READY())
|
|
|
|
|
next_sensor_state = adc_sensor_state; // redo this state
|
|
|
|
|
else if (ADCKey_count < ADC_BUTTON_DEBOUNCE_DELAY) {
|
|
|
|
|
raw_ADCKey_value = HAL_READ_ADC();
|
|
|
|
|
if (raw_ADCKey_value <= (HAL_ADC_RANGE) * 900UL / 1024UL) {
|
|
|
|
|
if (raw_ADCKey_value <= 900UL * HAL_ADC_RANGE / 1024UL) {
|
|
|
|
|
NOMORE(current_ADCKey_raw, raw_ADCKey_value);
|
|
|
|
|
ADCKey_count++;
|
|
|
|
|
}
|
|
|
|
|
else { //ADC Key release
|
|
|
|
|
if (ADCKey_count > 0) {
|
|
|
|
|
if (ADCKey_count > 0) ADCKey_count++; else ADCKey_pressed = false;
|
|
|
|
|
if (ADCKey_pressed) {
|
|
|
|
|
ADCKey_count = 0;
|
|
|
|
|
current_ADCKey_raw = HAL_ADC_RANGE;
|
|
|
|
|
}
|
|
|
|
|
else
|
|
|
|
|
ADCKey_count++;
|
|
|
|
|
}
|
|
|
|
|
else
|
|
|
|
|
ADCKey_pressed = false;
|
|
|
|
|
}
|
|
|
|
|
if (ADCKey_count == ADC_BUTTON_DEBOUNCE_DELAY) ADCKey_pressed = true;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
else
|
|
|
|
|
next_sensor_state = adc_sensor_state; // redo this state
|
|
|
|
|
|
|
|
|
|
} break;
|
|
|
|
|
|
|
|
|
|
break;
|
|
|
|
|
#endif // HAS_ADC_BUTTONS
|
|
|
|
|
|
|
|
|
|
} // switch(adc_sensor_state)
|
|
|
|
|
|
|
|
|
|
// Go to the next state (may be unchanged)
|
|
|
|
|
adc_sensor_state = next_sensor_state;
|
|
|
|
|
|
|
|
|
|
// Assume that the state advances
|
|
|
|
|
next_sensor_state = NEXT_ADC_STATE(adc_sensor_state);
|
|
|
|
|
|
|
|
|
|
switch (adc_sensor_state) {
|
|
|
|
|
|
|
|
|
|
default: break;
|
|
|
|
|
|
|
|
|
|
case SensorsReady: {
|
|
|
|
|
// All sensors have been read. Stay in this state for a few
|
|
|
|
|
// ISRs to save on calls to temp update/checking code below.
|
|
|
|
|
constexpr int8_t extra_loops = MIN_ADC_ISR_LOOPS - (int8_t)SensorsReady;
|
|
|
|
|
static uint8_t delay_count = 0;
|
|
|
|
|
if (extra_loops > 0) {
|
|
|
|
|
if (delay_count == 0) delay_count = extra_loops; // Init this delay
|
|
|
|
|
if (--delay_count) // While delaying...
|
|
|
|
|
next_sensor_state = SensorsReady; // retain this state (else, next state will be 0)
|
|
|
|
|
break; // No fallthru
|
|
|
|
|
}
|
|
|
|
|
else {
|
|
|
|
|
adc_sensor_state = StartSampling; // Fall through to count up oversamples
|
|
|
|
|
next_sensor_state = NEXT_ENUM(StartSampling); // and possibly send the final readings.
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
// fallthru
|
|
|
|
|
|
|
|
|
|
case StartSampling: // Start of sampling loops. Do updates/checks.
|
|
|
|
|
if (++temp_count >= OVERSAMPLENR) { // 10 * 16 * 1 / (16000000 / 64 / 256) = 164ms.
|
|
|
|
|
temp_count = 0;
|
|
|
|
|
readings_ready();
|
|
|
|
|
}
|
|
|
|
|
adc_sensor_state = NEXT_ENUM(StartSampling); // Do one Prepare phase before exiting
|
|
|
|
|
next_sensor_state = NEXT_ENUM(adc_sensor_state); // Also update the next state
|
|
|
|
|
// fallthru
|
|
|
|
|
|
|
|
|
|
#if HAS_TEMP_ADC_0
|
|
|
|
|
case PrepareTemp_0: HAL_START_ADC(TEMP_0_PIN); break;
|
|
|
|
|
#endif
|
|
|
|
|
#if HAS_HEATED_BED
|
|
|
|
|
case PrepareTemp_BED: HAL_START_ADC(TEMP_BED_PIN); break;
|
|
|
|
|
#endif
|
|
|
|
|
#if HAS_TEMP_CHAMBER
|
|
|
|
|
case PrepareTemp_CHAMBER: HAL_START_ADC(TEMP_CHAMBER_PIN); break;
|
|
|
|
|
#endif
|
|
|
|
|
#if HAS_TEMP_PROBE
|
|
|
|
|
case PrepareTemp_PROBE: HAL_START_ADC(TEMP_PROBE_PIN); break;
|
|
|
|
|
#endif
|
|
|
|
|
#if HAS_TEMP_ADC_1
|
|
|
|
|
case PrepareTemp_1: HAL_START_ADC(TEMP_1_PIN); break;
|
|
|
|
|
#endif
|
|
|
|
|
#if HAS_TEMP_ADC_2
|
|
|
|
|
case PrepareTemp_2: HAL_START_ADC(TEMP_2_PIN); break;
|
|
|
|
|
#endif
|
|
|
|
|
#if HAS_TEMP_ADC_3
|
|
|
|
|
case PrepareTemp_3: HAL_START_ADC(TEMP_3_PIN); break;
|
|
|
|
|
#endif
|
|
|
|
|
#if HAS_TEMP_ADC_4
|
|
|
|
|
case PrepareTemp_4: HAL_START_ADC(TEMP_4_PIN); break;
|
|
|
|
|
#endif
|
|
|
|
|
#if HAS_TEMP_ADC_5
|
|
|
|
|
case PrepareTemp_5: HAL_START_ADC(TEMP_5_PIN); break;
|
|
|
|
|
#endif
|
|
|
|
|
#if HAS_TEMP_ADC_6
|
|
|
|
|
case PrepareTemp_6: HAL_START_ADC(TEMP_6_PIN); break;
|
|
|
|
|
#endif
|
|
|
|
|
#if HAS_TEMP_ADC_7
|
|
|
|
|
case PrepareTemp_7: HAL_START_ADC(TEMP_7_PIN); break;
|
|
|
|
|
#endif
|
|
|
|
|
#if ENABLED(FILAMENT_WIDTH_SENSOR)
|
|
|
|
|
case Prepare_FILWIDTH: HAL_START_ADC(FILWIDTH_PIN); break;
|
|
|
|
|
#endif
|
|
|
|
|
#if HAS_JOY_ADC_X
|
|
|
|
|
case PrepareJoy_X: HAL_START_ADC(JOY_X_PIN); break;
|
|
|
|
|
#endif
|
|
|
|
|
#if HAS_JOY_ADC_Y
|
|
|
|
|
case PrepareJoy_Y: HAL_START_ADC(JOY_Y_PIN); break;
|
|
|
|
|
#endif
|
|
|
|
|
#if HAS_JOY_ADC_Z
|
|
|
|
|
case PrepareJoy_Z: HAL_START_ADC(JOY_Z_PIN); break;
|
|
|
|
|
#endif
|
|
|
|
|
#if HAS_ADC_BUTTONS
|
|
|
|
|
case Prepare_ADC_KEY: HAL_START_ADC(ADC_KEYPAD_PIN); break;
|
|
|
|
|
#endif
|
|
|
|
|
case StartupDelay: break;
|
|
|
|
|
|
|
|
|
|
} // switch(adc_sensor_state)
|
|
|
|
|
|
|
|
|
|