082f6a27de
ADAPTIVE_FAN_SLOWING extension to hotend thermal protection ( #12853 )
6 years ago
459f4fef60
Fix Temperature::init bug with HEATER_4_PIN
6 years ago
a403d9a50c
Improve menu pause / resume ( #12876 )
6 years ago
432c21456f
Add 3DFabXYZ Migbot example config ( #12775 )
...
Co-Authored-By: Alain Martel <alain74martel@gmail.com>
6 years ago
fb8111553e
getStatus => report_status
6 years ago
2919f3045d
[LPC176x] Update PIO extrascript ( #12878 )
6 years ago
19fea772e5
Use E_AXIS_N where it makes sense
6 years ago
0d30ccf767
Tweaks to TMC26XStepper
6 years ago
1fd8e2c649
Fix: Junction Deviation calculates wrong cos(theta) on CoreXY ( #12879 )
6 years ago
b402040059
Split bed size sanity check into two
6 years ago
1d33784bf9
Add RUMBA32 Board ( #12856 )
6 years ago
a0ef6198ff
Level bed corners Z-hop height option ( #12858 )
6 years ago
8ae6f1e556
Fix errors and some compiler warnings with HAL_STM32 PlatformIO build ( #12869 )
6 years ago
e6484d9dab
Return to status when SD card is removed
6 years ago
5f2d75f45b
Move PINS_DEBUGGING to @section develop
6 years ago
da42f27c9e
Use maths macros for ceil/floor
6 years ago
de4561c980
VORON Add LCD option BEEP_ON_FEEDRATE_CHANGE ( #12822 )
6 years ago
917cf3c7f0
Fix (broken) link to Install ReArm tutorial ( #12823 )
6 years ago
709a6356f7
Remove obsolete test conditions ( #12829 )
6 years ago
bcf347403b
Fix M106 extruder & fan count ( #12820 )
6 years ago
ba7e35cbab
Add LCD option BEEP_ON_FEEDRATE_CHANGE ( #12774 )
6 years ago
d372e7e477
SDIO support for STM32F1 ( #12782 )
6 years ago
6a8fb0f25f
Simplify backlash compensation code. ( #12813 )
...
- Use `TEST(dm,axis)` to determine directions instead of doing comparisons.
- Remove recomputation of `millimeters` and `delta_mm` since backlash compensation should not affect the distance over which material is extruded.
6 years ago
a59d3d4323
Restore Flattr links to README
6 years ago
7f244f9b9c
Update LPC SD pins for BIQU SKR ( #12767 )
...
(Exactly matching the Azteeg X5 MINI Wifi)
6 years ago
813a4ea107
Add support for Mks Robin TFT display ( #12706 )
...
* Add support for MKS Robin TFT display
- Add support for MKS Robin TFT display and encoder for MKS Robin board.
- Generic 128x64 UI with x2 upscale is used (for now).
- Tested on MKS Robin TFT V2.0 with ST7789V controller.
6 years ago
c4237b529f
Fix MKS Mini and SD card conflct over SPI mode ( #12783 )
6 years ago
01f75591c6
Fix GTM32_PRO_VB Serial and HAL via watchdog ( #12753 )
...
Move `watchdog_reset` from `.h` to `.cpp` to eliminate the need to include `MarlinConfig.h` in a HAL-related file.
6 years ago
288340cb6c
Followup to VORON
6 years ago
2aaa681dea
Remove unused Cheaptronic pins
6 years ago
81e753064a
Fix ExtUI compile warnings and error ( #12799 )
6 years ago
74c47803f7
Add VORON printer ( #12705 )
6 years ago
637fb20c75
Allow 4 fan animation frames ( #12772 )
6 years ago
d9cf5e4883
Update pins_BIQU_SKR_V1.1.h ( #12758 )
6 years ago
cb643d87df
Adding missing code for triple Z-stepper auto-align ( #12786 )
6 years ago
14a7faf087
Fix compile warning comparison uint and int ( #12788 )
6 years ago
60cb36bef3
Misc. improvements ( #12747 )
...
* Make ExtUI respect MAXTEMP limits
- Temperatures are now clamped by MAXTEMP limits rather than arbitrary values.
* Speed up USB init, add status
- Speed up USB initialization
- Show status message if init failed
* Enable status messages for EXTENSIBLE_UI
* Adjust max limit to MAX_TEMP - 15
* Misc. tweaks to formatting, const, etc.
6 years ago
4f2473053c
Fix M106 with SINGLENOZZLE
6 years ago
7557f8d68c
Rename all Stm32f1 to STM32F1 ( #12639 )
6 years ago
371d9a1acf
Fix line-endings, formatting, whitespace
...
Followup to #12770
6 years ago
135c74017c
Fix compile DEBUG_EEPROM_READWRITE error ( #12746 )
6 years ago
54ba44ee37
Fix bad sanitycheck ( #12748 )
6 years ago
b01a630bd0
[2.0.x] Correct Ender 3 bed size ( #12769 )
6 years ago
44ed34475b
Add MKS BASE 1.4 pins ( #12770 )
6 years ago
3a16cb6d7f
Slightly Slower Max X Axis speed
...
On some T-Rex 2+ machines the previous max step rate could lose steps....
6 years ago
814d93c7cf
Fix G33 sprintf output warning ( #12738 )
6 years ago
3877bf9704
Fix compile error with delta and sensorless homing ( #12740 )
6 years ago
cfc5e96b4b
Move JD to Config.h (and fix jerk->eeprom bug) ( #12720 )
6 years ago
594898aea7
Limit hotend / bed temperature to maxtemp-15 ( #12713 )
6 years ago
530ef5846f
Make nomove=false for toolchange on filament swap ( #12739 )
6 years ago
InsanityAutomation