Commit Graph

2966 Commits (e09ff7963585bca8307111a5b9ab84f1efce65ed)

Author SHA1 Message Date
RicardoGA e09ff79635 Update pins_RAMPS_13.h (PR#64)
Now all ramps configuration can enable Filament sensor not only EEB
Fourmi e6aed7bb4e Update thermistortables for Hisens Thermistor (PR#2588)
Richard Wackerbarth 9d8cc24abf Continue from the line following the M999 (PR#60)
If the printer is going to accept the M999,
then it should continue from that line number.
wurstnase f3ab1dba54 Z babystepping for coreXY (PR#47)
only X and Y were not implemented
Richard Wackerbarth 35afea1c0e Restore test
PR#2572 Changed this because of faulty Boolean Logic

NOT(A OR (NOT B) OR (NOT C)) !=

(NOT A) AND ((NOT B) OR C))


Besides, the compiler should be smart enough to
optimize this without help from the programmer
Scott Lahteine 6af75f4b5d Squish down deprecated tests in sanity check
Scott Lahteine edeb58288e Use PIN_EXISTS in sanity check
Scott Lahteine c30b7693e0 Clean up RUMBA pins conditions
Scott Lahteine 46453905d6 Apply remaining ENABLED/DISABLED conditionals
Richard Wackerbarth b227d8c128 Supply a VERSION in a short form for displays
The long descriptor will still be available in M115
Richard Wackerbarth cd7828a928 This will be the 1.1.0 Release rather than 1.0.3
Richard Wackerbarth 4e2f5618c1 Pick up Default_version when needed
Richard Wackerbarth 329acc852e Canonize Option flag USE_AUTOMATIC_VERSION
Richard Wackerbarth 5a11d32a85 Move deprecation test to SanityCheck.h
Richard Wackerbarth 7bb7a52940 Bring config up-to-date
AnHardt 244ea2014a Boot-screen for text-displays improvements
Centred the logo for 16x4 and 20 x4.
Moved version to the bottom line
Code shrink to 704 bytes.
AnHardt 80f2a20842 Enable bootscreen in all Configurations
AnHardt 2684d061ed Scroll too long strings on bootscreen
AnHardt 4f46df5dab Make bootscreen configurable for the graphic displays
Saves about 473 byte of progmem and 28 bytes of RAM.
AnHardt 09571b7753 Boot-screen for the character displays
Uses about 488 byte of progmem and 32 byte of RAM.
For that configurable.
Richard Wackerbarth 866efc14fe Add Danish translations
Scott Lahteine 267f3479d7 Adjust spacing in pins_RAMPS_13.h
Scott Lahteine 56702e7bb9 Define servo pins just like other pins
Richard Wackerbarth 4b9d5cd352 Use lowercase names for serial instances
Scott Lahteine 1e2deff4fd Rename BTENABLED to BLUETOOTH
- For some reason it’s easy to forget what BT stands for, but it
doesn’t need an abbreviation.
Scott Lahteine 68055a5959 Include RIGIDBOT_PANEL in Conditionals
George Djabarov f8ed3a835d Added comment with the RigidBot Big bed size
George Djabarov 7deae6b6be Updated RigidBot example configuration
- The default serial baud rate of 115200
- The regular RigitBot bed size 254mm/248mm/254mm
- Single stock extruder
- Stock termistors for extruder and hotbed
- Stock Min X/Y/Z stops. Max stops not connected
- Stock 32 teth tooleys (stock axis steps)
- No auto bed leveling
- No screen
Scott Lahteine 5418faa1f9 Add sanity checks for old names
Scott Lahteine f03e063750 Rename BEEPER to BEEPER_PIN
For consistency with other pins, allowing use of `PIN_EXISTS` macro.
Scott Lahteine 270c766de2 SDCARDDETECT -> SD_DETECT, added docs
- `SD_DETECT_PIN` replaces `SDCARDDETECT`
- `SD_DETECT_INVERTED` replaces `SDCARDDETECTINVERTED`
- Revise the description of `SD_DETECT_INVERTED`
- Add a note about the override of `SD_DETECT_INVERTED` in
`Conditionals.h`
Scott Lahteine 496fc28dc3 Tweaks to pins comments
Scott Lahteine 8d3b74cc6e Rename SDCARDDETECT to SDCARDDETECT_PIN
- Rename the pin so it can be tested with `PIN_EXISTS`
- Fix some incorrect tests for `SDCARDDETECT`
Scott Lahteine 0f5ada8cbd Group the fail case in one negation (PR#2572)
AnHardt 7ddf1cda1d Improve condition for SERVO_LEVELING (PR#2570)
Richard Wackerbarth f32048b8f5 In for a penny, in for a pound
Scott Lahteine e944f960de Add a sanity check for old name "BEEPER"
Scott Lahteine 8ebf0b92be Spacing adjustments in some pins files
Scott Lahteine 94a796c8cc Rename BEEPER to BEEPER_PIN
For consistency with other pins, allowing use of `PIN_EXISTS` macro.
Richard Wackerbarth b217474eab Compiler Complaints about concatenated tokens (PR#2566)
Scott Lahteine 2460f82d8b Make proper distinction between BEEPER and HAS_BUZZER
Scott Lahteine 58cfcd4239 Overridable Options - Part 5
Apply `ENABLED` / `DISABLED` macros to files needing only a small
number of changes.
Scott Lahteine 5e834352a9 Overridable Options - Part 11 (PR#2563)
Apply `ENABLED` / `DISABLED` macros to EEPROM-related files.
Scott Lahteine bf6eb93c61 Overridable Options - Part 10 (PR#2562)
Apply `ENABLED` / `DISABLED` macros to planner files.
Scott Lahteine 51e89a269c Overridable Options - Part 9 (PR#2561)
Apply `ENABLED` / `DISABLED` macros to temperature-related files.
Scott Lahteine c35fb88094 Overridable Options - Part 8 (PR#2560)
Apply `ENABLED` / `DISABLED` macros to stepper-related files.
Scott Lahteine 0d8989fc14 Overridable Options - Part 7 (PR#2559)
Apply `ENABLED` / `DISABLED` macros to LCD-related files.
Scott Lahteine b4abb0ae7f Apply ENABLED / DISABLED to Marlin core files (PR#2558)
Scott Lahteine c0d7ea3e7e Overridable Options - Part 4 (PR#2556)
Apply `ENABLED` / `DISABLED` / `HAS_SERVOS` macros to pins files.
Scott Lahteine 4b40964064 Overridable Options - Part 3 (PR#2555)
Apply `ENABLED` / `DISABLED` macros to language-related files.