d557c84a71
[2.0.x] Error for FAST_PWM_FAN with 32 bit CPU ( #10798 )
7 years ago
83d42f33e1
Add HAS_HOTEND_OFFSET_Z conditional
7 years ago
3c76bda2d8
Fix switching extruder
...
`DONT_SWITCH` got lost along the way. Replace it with `DO_SWITCH_EXTRUDER` and adjust the code.
7 years ago
43ddb29f9e
Add FAN_MAX_PWM for M106-controlled fans
7 years ago
b7dfc79988
Disable SERIAL_PORT_2 by default and sanity-check it ( #10748 )
7 years ago
99ecdf59af
Smarter MIN, MAX, ABS macros
...
Use macros that explicitly avoid double-evaluation and can be used for any datatype, replacing `min`, `max`, `abs`, `fabs`, `labs`, and `FABS`.
Co-Authored-By: ejtagle <ejtagle@hotmail.com>
7 years ago
a1062eec5b
Better handling of DELAY_NS and DELAY_US ( #10716 )
...
Co-Authored-By: ejtagle <ejtagle@hotmail.com>
7 years ago
325bbbc8c2
[2.0.x] Enable AD595 and AD8495 in concert ( #10693 )
...
* Allow both AD595 and AD8495 in concert
* General temperature code tweaks
7 years ago
19f189b4e5
Add UBL support for G2/G3 and G5 ( #10648 )
7 years ago
4e16e699c1
Fix sanity checks for dual axes ( #10633 )
7 years ago
e978e6e782
[2.0.x] Arrange LCD options by type ( #10630 )
7 years ago
8c5bc77fb9
Fix the sanity-check for config versions
7 years ago
81b632c255
Additional temp-oriented improvements
7 years ago
e911635fb1
Add thermocouple with AD8495 support
7 years ago
b7e938a9fb
LCD_BED_LEVELING enables a sub-menu for ABL
7 years ago
05c33833e7
[2.0.x] Add NO_LCD_MENUS option ( #10582 )
7 years ago
616651ff23
Add sanity check for LED_CONTROL_MENU
...
Addressing #10569
7 years ago
f790b4bc0a
Reorganize some conditionals
7 years ago
df6bc812b5
Fix disable of Z_HOMING_SENSITIVITY for HOMING_Z_WITH_PROBE
...
As pointed out in #10532
7 years ago
299c4fed42
Undefine PIDTEMPBED without a bed heater
7 years ago
cb46cb8480
Add HAS_HEATED_BED conditional ( #10495 )
7 years ago
9e07df5c1b
Extra options for LEVEL_BED_CORNERS ( #10483 )
7 years ago
11ab017dd0
Creality3D Power-Loss Recovery
7 years ago
a0dac95d25
Merge pull request #10460 from thinkyhead/bf2_trigorilla_14
...
[2.0.x] Split TRIGORILLA into 1.3 and 1.4
7 years ago
f0cbf3d432
Correction to sanity check
7 years ago
80e29492c6
TRIGORILLA => TRIGORILLA_13
7 years ago
5cc7916e69
Add G29_RETRY_AND_RECOVER feature
...
- Add an option to retry G29, optionally executing a G-code procedure after each failed probe.
7 years ago
4f184ba5da
[2.0.x] Add BOARD_MKS_BASE_15 with digital micro-stepping ( #10454 )
...
* Add BOARD_MKS_BASE_15 with digital micro-stepping
* Rename MKS_13 to MKS_GEN_13
7 years ago
39c6f65ce7
Ignore LCD_BED_LEVELING with UBL
7 years ago
c9aed73987
Fix missed includes from HAL macro patch ( #10416 )
7 years ago
cc6d41e1d3
Use a macro for HAL header redirection ( #10380 )
7 years ago
12785583d0
[2.0.x] G33 MIN_STEPS_PER_SEGMENT ( #10386 )
7 years ago
c96412a78f
[2.0.x] UTF-8 language translation support ( #10213 )
7 years ago
57a899a412
[2.0.x] 6th-order jerk-controlled motion planning in real-time for AVR ( #10373 )
7 years ago
2d9b0a66fe
Add Filament Change accelerations
7 years ago
8b8ad14178
Add Z_PROBE_LOW_POINT to prevent damage
7 years ago
e02fc4f1d6
Better RESTORE_LEVELING_AFTER_G28 sanity-check
...
As suggested by @GMagician
7 years ago
a29adde5c0
Implement BEZIER_JERK_CONTROL
...
Enable 6th-order jerk-controlled motion planning in real-time.
Only for 32bit MCUs. (AVR simply does not have enough processing power for this!)
7 years ago
0e8242180d
Chamber temperature monitoring and auto fan control.
...
This is an initial cut for feedback, updated for 2.0.x.
Chamber temperature is currently reported along with hot end and bed
temperatures to serial. The format is just like that used for hot end
and bed temperatures, but using 'C' prefix. As there is no heater,
target is always 0. Is this appropriate, is there a better way to report
chamber temperatures?
Chamber temperatures are not reported on the LCD in any way.
When auto chamber fan is enabled, it currently just uses the same
temperature threshold as the other auto controlled fans.
As the chamber temperature is not connected to any heater, it doesn't
undergo mintemp/maxtemp monitoring. This would need to change in the
future if chamber heating became a feature.
7 years ago
75037493fa
Default active low for TMC2130 DIAG1 ( #10294 )
...
- Added sanity check to inform users to set the endstop to inverting
when using SENSORLESS_HOMING
7 years ago
7cbbc2af7a
[2.0.x] Optional heater signal inversion ( #10260 )
7 years ago
adcb87f0db
Z Endstop Servo => Z Probe Servo
7 years ago
49f384a2ab
Note about MKS_MINI_12864 in sanitycheck
7 years ago
f6d13e2295
Allow Z_SAFE_HOMING sanity checks to handle floats
7 years ago
1be955e52a
Alert users about low Z jerk values
7 years ago
a891af2f7a
Enforce minimum TMC2130 / TMC2208 libs
7 years ago
433e984d1f
move comment to fix compile error
7 years ago
b756a15aba
another needs to be deleted
7 years ago
50c81ebe0d
remove check that always fails
7 years ago
3ac135cef3
Enforce minimum TMC2130 / TMC2208 libs
7 years ago
97e8a6ebd9
Various fixes for DUE... ( #10152 )
...
- Watchdog reset during SD Card initialization.
- Move `DebugMonitor` to `DebugMonitor_Due.cpp`.
- Since the watchdog is enabled on boot do extra resets during init.
- Have `thermalManager` do watchdog reset before its ISR starts to prevent reset.
- Ensure that timers are stopped before reprogramming them to address tone issues.
- Improve SAM3XE reset when reflashed through the native port.
7 years ago
987597532c
For MK2_MULTIPLEXER undef DISABLE_INACTIVE_EXTRUDER
...
Fix #10098
7 years ago
dd2949922b
Consolidate 3-point leveling point options
7 years ago
1d22609473
MIN_PROBE_EDGE replaces DELTA_PROBEABLE_RADIUS
7 years ago
d603e655d3
Fix SWITCHING_EXTRUDER manual movement
7 years ago
5f77816772
Reduce size of "only one" sanity checks
7 years ago
e7570f3195
Improve TMC config organization, naming
7 years ago
14c03cb6f4
[2.0.x] Make MIN_PROBE_EDGE a general option (for electronic probes) ( #10069 )
...
Some probes don't work near the edges of the bed. This change promotes MIN_PROBE_EDGE to a general setting that applies to all probing functions.
7 years ago
28f1276286
[2.0.x] Add Z_AFTER_PROBING option ( #10058 )
...
Some "fix-mounted" probes need manual stowing. And after probing some may prefer to raise or lower the nozzle. This restores an old option but tailors it to allow raise or lower as preferred.
7 years ago
0d8c15c01f
restore PR 9661 files & V1 fix
7 years ago
bf59a4a6df
Revert "[2.0.x] DUE compatibility with shared SPI LCDs, USB mass storage, add pin defs & update examples\MakerParts\Configuration.h"
7 years ago
914bb80bde
removed SDSS init
...
added device & comm drivers for shared SPI LCDs
mistyped some updates in ultralcd_impl_DOGM.h
remove unwanted changes in onfiguration.h
still can't type
Update HAL_LCD_class_defines.h
include USB mass storage & misc
7 years ago
eb212ae073
Add suspend_auto_report flag to suppress auto-report
7 years ago
ffbf63e6af
Add HAS_TEMP_SENSOR conditional
7 years ago
6d7f4f84e2
Add board MKS_BASE_HEROIC ( #9926 )
...
Followup to #9008
- Don't define micro-stepping pins for boards that lack them.
- Allow setting of 128 microsteps with `M350`.
7 years ago
c37b3f995a
Sanity-check some graphical LCD-only options
7 years ago
c1f4112bdc
[2.0.x] Add 1284 support & misc. bug fixes ( #9864 )
7 years ago
118899357d
Add sanity checks to Linear Advance 1.5 ( #9873 )
7 years ago
a446433c87
Fix SENSORLESS_HOMING for Core Kinematics ( #9868 )
7 years ago
8c03ce4d80
Fix Z safe homing sanity check for no probe
...
Fix #9851
7 years ago
3f89bbeab5
Drop a conditional only used once
7 years ago
b2cf253a13
Add RESTORE_LEVELING_AFTER_G28 option
7 years ago
2bd252b501
[2.0.x] LIN_ADVANCE v1.5 ( #9712 )
7 years ago
7d8c6b3f3c
Add 20x4 option for Sainsmart LCD ( #9740 )
7 years ago
c4ec01d59b
Conditionals for SWITCHING_EXTRUDER
...
In reference to #5367 . SWITCHING_EXTRUDER was not fully implemented for EXTRUDERS > 2.
7 years ago
d3ca82d8c2
Support for multiple filament runout sensors
7 years ago
ca55f2927a
Pulldown pin mode support ( #9701 )
...
Implemented for LPC1768.
7 years ago
9019ea0fce
Option to force X or Y to home first when homing the other axis
7 years ago
f6cc89ec7c
LCD_PROGRESS_BAR w/out SDSUPPORT for character LCD
7 years ago
3d74ff3c87
Cartesian UBL systems should not use SEGMENT_LEVELED_MOVES
...
There is significant downside to breaking up the long line segments on UBL Cartesian machines. It adds a lot of extra computation but worse... It cuts out all of UBL's off mesh Z-Height correction checks. There have been a large number of people complaining about the nozzle going to infinity or crashing into the bed lately. They are being caused by
```
void unified_bed_leveling::line_to_destination_cartesian()
```
not watching over the segments being queued up for movement.
7 years ago
5dc04c5201
Fix #9361
7 years ago
8e0c107545
Have Kossel Pro use Z_MIN_PROBE_ENDSTOP ( #9586 )
7 years ago
f64d300cfd
Sanity check SERIAL_PORT
...
Addressing #7400
7 years ago
1541224a81
Enable Z axis and delta sensorless homing ( #9516 )
7 years ago
b2f8b4ada5
I2C position encoders update ( #9533 )
...
Updating I2C position encoders to enable babystepping and Babystep XY when using the ecm microstep correction method. Also changed default method to ECM microstep.
7 years ago
704d33c374
Special override of LCD_WIDTH
7 years ago
16739264d3
Add UltiController v2.1 support
...
Add compatibility with the original screen bord from Ultimaker 2 printer (UltiController v2.1 with the PG-2864ALBP I2C display)
7 years ago
f27c89980a
[2.0.x] Simplify bltouch configuration ( #9488 )
7 years ago
3a1225e438
Sanity check SENSORLESS_HOMING
7 years ago
db031d5d76
Add missing SoftwareSerial begin for TMC2208
...
Based on #9299
7 years ago
3db35ba9be
[2.0.x] Fix change filament for delta machines ( #9295 )
7 years ago
2ebf52e57d
Fix Skew Correction pre-calculation overflow error
7 years ago
582d073de1
Patch up digital microstepping and SPI CS pins
7 years ago
8190fdb260
[2.0.x] Option to use Neopixel as case light ( #9270 )
...
* Add option to use Neopixel as case light
* Apply CASE_LIGHT_USE_NEOPIXEL to example configs
7 years ago
4bc4351250
Date refresh
7 years ago
f2ea8a0529
Merge pull request #9197 from p3p/pr_bf2_operation_freemem
...
[2.0.x] LPC1768: Free up some RAM
7 years ago
9d0cf02fef
Correct mesh size calculations
7 years ago
acb1e31374
Fix UBL Mesh Size regression
7 years ago
6f1bf5d212
LPC1768: Config: default to SDSORT_LIMIT = 64 instead of 256
7 years ago
6a043eee55
Various updates for TMC support
7 years ago
Bob Kuhn