2079 Commits (abfcbd793f7acda1b166e3fb647aa5f843fc7c1c)

Author SHA1 Message Date
kieranc 0a19109476 Enable PID debugging for heated bed 10 years ago
Tommi Lamberg a4f939cc27 Updated Finnish language file 10 years ago
Scott Lahteine 32d4dd073f Merge pull request #1487 from AnHardt/iss1485
Fix for #1485
10 years ago
AnHardt c246026bda Sorry. 10 years ago
AnHardt 07e488cfae Fix for #1485 10 years ago
Souko e7ecf14d0c Update ultralcd_st7920_u8glib_rrd.h
Fixed delay-times during Init. REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER won't get initialized on some Boards because delay was to short.
10 years ago
Scott Lahteine 52c3cf6d34 Fix a logging error 10 years ago
Scott Lahteine ba24a09f24 Use api.github to get Configurations
- Make api.github the default source for configurations
- Remove configurations from the configurator
- Continuation and enhancements
10 years ago
Natealus f4b0a40abb Additional fixes to temperature.cpp and found another missing line
Looks like INVERT_E3_DIR was missing in the configuration.h also as I
did a test compile with 4 extruders and Azteeg X3 Pro defined. So I also
added those lines too. Additional formatting to make the comments line
up better in that section.
10 years ago
AnHardt 3aac2df057 Now the oter way around.
Include of language_en.h now behind national language.

All "#define MSG_STR_*" now surrounded by #ifndef and #endif.
10 years ago
AnHardt 488633bf44 #include "language_en.h" before the national language in language.h
+ May decrease the workload for feature developers. They may omit to
update all the language files but "language_en.h". When loading _en
first, all new features give some display, but the new in English.

- May throw some additional warnings about redefinition during compile.
10 years ago
AnHardt 8e92729141 Make display language configurable in Configuration.h 10 years ago
Natealus 38a500d05c Viki 2 Implementation
I've insert the define and pointer entries for the Viki 2 and miniViki
from Panucatt in all of the example configs and main config. With these
additions and with pins done in the old single pin.h style...I was able
to get the display working fine save for needing to turn Delta Segments
per Second down. But that's a common graphics lcd issue being looked
into right now.

I need assistance in understanding how the new divided pins files fit
together because my previous attempts at trying to get it to work
appropriately didn't seem successful. This originally came from trying
to find out how to swap the XYZ Min and Max Endstop pins in the Azteeg
X3 Pro. It only comes with one set of connectors and they're Min
Endstops. My previous experience didn't turn out well trying to tell the
firmware to home to the Min Endstops so the best solution I found was to
swap the pins in the firmware. If I'm missing a conflict with a setup
other than delta please let me know, but it makes sense in my setup.
10 years ago
Natealus 697ee2dc50 Compiling errors with 4 Extruders defined
Here were a few changes that I had to make/add lines for the 4th hotend.
A compiling problem in the Temperature.cpp and missing lines in
configuration.h and configuration_adv.h. I added these lines in all of
the example configs too.
10 years ago
Jérémie FRANCOIS 85e5aa4011 Generalized enqueue_commands_P, and moved them to Marlin_main as they should 10 years ago
Scott Lahteine 4228758f1d Clean up and improve tooltips, show the name 10 years ago
Scott Lahteine 0116320d2c Strip slashes off the front of tooltips 10 years ago
Scott Lahteine 69240d41b0 Offset the timing of the pulsing animation 10 years ago
Scott Lahteine 78b9428f4e Avoid capturing disabled items in comments 10 years ago
Scott Lahteine 5d159851e5 Fix positioning of tooltip 10 years ago
Scott Lahteine c99f1de9f3 Fix tooltips blocking clicks 10 years ago
Scott Lahteine 1a548c1bc1 Find nearby comments and make them into tooltips 10 years ago
Scott Lahteine 90fa1345b0 Fix purge + refresh of define info 10 years ago
Scott Lahteine aa67b38a44 Fan speed and 4th extruder on graphical LCD
- Display fan speed 0-1 as “—“ and 254-255 as “100%”.
- Display 4th extruder instead of the heated bed
10 years ago
Scott Lahteine 7850ae2f4f Merge branch 'Development' into marlin_configurator
Merge latest Development
10 years ago
Scott Lahteine 2647402095 Use info.repl in updateDefineFromField, fix regex 10 years ago
Scott Lahteine 12a3975341 Close section tag, add String.prototype.lineCount 10 years ago
Scott Lahteine 4bb72f9480 Highlight the edited line
- Add a span to the edited text line to provide a highlight
- Scroll and highlight for switch checkboxes also
- Clean up initialization
- More API documentation
- Smarter handling of asynchronous file loading during init
10 years ago
Scott Lahteine 37c43a7ab3 Scroll to reveal on switches as well 10 years ago
Scott Lahteine 9c0adae3cd Scroll to setting position in file when edited
- Animate scrolling to the edited item’s position
- Sanity check file drops and show warnings
- Fix form init / refresh on new configuration drop
- Document the API methods that get/set defines
10 years ago
Scott Lahteine 4d341bb758 Copy configs into subfolder
Browsers may not want to load files outside the folder, but they may be
okay with these relative references within the folder.
10 years ago
Scott Lahteine 72856166a9 Fix bad typo in ConfigurationStore.cpp 10 years ago
Scott Lahteine b51204cc1c Add fieldsets and make them into tabs 10 years ago
Scott Lahteine 56769ba4f8 Make comment/uncomment a little neater 10 years ago
Scott Lahteine 94bebf31ac Pre-collect info about options on field init
- When initializing fields use the configuration to determine the format
- Cache the line for each option for fastest string compare / replace
- Add logging levels for debugging
10 years ago
Scott Lahteine 32aaadc301 Include minimized jQuery 2.1.3 10 years ago
Scott Lahteine 53f6bbdfe0 Try a stepper for the serial port 10 years ago
Scott Lahteine ac7a4358d6 Add a responsive file uploader
- Specify HTML5
- Allow drag and drop for loading configurations
10 years ago
Scott Lahteine 09a385d9b0 Add "use strict" to the top. 10 years ago
Scott Lahteine b2627200ea Get thermistors from config, add temp sensors 10 years ago
Scott Lahteine ef18bfdd3f An in-place browser-based configurator utility
- A web form with fields for configuration values
- Reads and parses standard config files
- Modifies configurations dynamically in-place
10 years ago
Scott Lahteine 3490a19103 Merge pull request #1466 from CONSULitAS/Development_K8200_de
K8200: Example Configuration.h fixed
10 years ago
CONSULitAS cfbb94a2a8 K8200: Example Configuration.h fixed
Example Configuration.h: fixed strange white characters preventing
compilation in lines 1 and 3 - oops
10 years ago
Scott Lahteine b65c5d8ec6 Merge pull request #1464 from AnHardt/iss1448-Menu
Unified menu selection - by hilighting - made first column avilable
10 years ago
CONSULitAS 0de5083aff K8200: Example Configurations readme.md updated
Example Configurations for K8200 readme.md updated
* readme.md: added description for german umlaut support on LCD
10 years ago
CONSULitAS c421ffd520 K8200: Example Configuration_adv.h back in sync
Example Configuration_adv.h for K8200 back in sync
* Configuration_adv.h: rebased and added missing changes for 4th
extruder
10 years ago
CONSULitAS 0575dd10de K8200: Example Configuration.h back in sync
Example Configuration.h for K8200 back in sync
* Configuration.h: rebased and added missing changes
* Configuration.h: updated comments for K8200
10 years ago
AnHardt f708884808 Introduced new function lcd_implementation_mark_as_selected()
New function now drops the prechar (select character) and makes the first
column usable for text.
Marking the line is now constantly made by highlighting (reverse).

Replaced selection code in:
lcd_implementation_drawmenu_generic()
_drawmenu_setting_edit_generic()
_drawmenu_sd()

with new function.
10 years ago
Scott Lahteine b6ca50a2cc Merge pull request #1463 from thinkyhead/cleanup_recent_merge
Apply some cleanup for recent merge
10 years ago
Scott Lahteine cc56f36870 Merge pull request #1461 from thinkyhead/issue_1453_redo
Apply fix for M600 filament change
10 years ago
Scott Lahteine 8663f4bbaf Apply some cleanup for recent merge
Combine 1/(rows+1) with u8g.getHeight() to get rowHeight and just use
that.
10 years ago
Scott Lahteine 0cb1029311 remove extra plan_buffer_line 10 years ago
AnHardt 9381bfe7f9 Fixes issue #1447 - Overlapping of long descriptions with values. 10 years ago
Scott Lahteine b97a950f53 Apply fix for M600 filament change
- Patch from #1453 for delta movement plan
- Fix: Set X with code X instead of adding to X
10 years ago
AnHardt 2abf1ad940 Distribute recent changes in Configuration.h to the examples. 10 years ago
AnHardt 33f8580255 Merge branch 'lcd-width' into b- 10 years ago
AnHardt 0c24bb6cfc Adjust LCD_WIDTH to make better use of DOGM LCDs 10 years ago
AnHardt b1dbd765c6 Centralise definition of fonts for DOGM displays
Prework for issue #1448 and #1447

Will merge in when pull request #1457 is in.
10 years ago
AnHardt 65642592ee Added dualline version. 10 years ago
AnHardt f9cc1df00b Droped URL from bootsplash. 10 years ago
AnHardt c20606b8d7 Replaced some literal constants with defines
Replaced calculation to centre bitmap with fixed values.
Saved 20 bytes.
10 years ago
AnHardt 3602474c25 Replace solitaire use of u8g_font_5x8 font and replace with u8g_font_6x10_marlin
and win another 1694 bytes.
10 years ago
AnHardt f5fd94d62a Kick suspicious loop an win 72 bytes.
No visible impact.
10 years ago
Scott Lahteine b3973ed224 Fix HD44780 misspelled as HD44870 10 years ago
Scott Lahteine d8b7f29fa2 Merge pull request #1452 from thinkyhead/fix_M200_bug
M200 cleanup, normalization of EXTRUDER loops
10 years ago
Scott Lahteine 6d81968db5 Merge pull request #1450 from docdawning/Development
Normalized section headers, added some headers, added help URLs for newb...
10 years ago
DocDawning 5bb3933b21 Fixed n00bsauce 10 years ago
DocDawning d109cd940b Normalized all configuration files to include my new section headers and the like. 10 years ago
DocDawning 055c4beaf9 Normalized section headers, added some headers, added help URLs for newbies 10 years ago
Scott Lahteine 9dc5de6166 Hide code that makes veteran geeks go "aha!" 10 years ago
Scott Lahteine bd387068bb Apply loops for extruders elsewhere also 10 years ago
Scott Lahteine 4a146d584b Loop, since the pending feature can use an array 10 years ago
Scott Lahteine bca884bf72 Realized it's not a bug, but cleanup code anyway 10 years ago
AnHardt 2dd43a82b1 Ups. #else added 10 years ago
AnHardt 26e55471f8 Update example configurations. 10 years ago
AnHardt 85385be132 Removed now automatic define of DISPLAY_CHARSET_DOGM + improved description. 10 years ago
AnHardt 0e40408ee5 Make exemplaric use of new display charsets in language_en.h and languag_de.h 10 years ago
AnHardt 8dce5a6644 Improve new charset featur.
Select DOGM-displays automaticly.
Give hint where to find charsets.
Add '²' and '³' characters.
10 years ago
Scott Lahteine c009c81e65 make marlin-main the default 10 years ago
Scott Lahteine f4ebc02555 marlin url 10 years ago
Scott Lahteine 0af9a0bf57 url to firmware downloads 10 years ago
Scott Lahteine 5f8dd92905 toss in a fix for .ru 10 years ago
Scott Lahteine 3f3ad9b3ad typo 10 years ago
Scott Lahteine 07639053fb Add support for BQ Prusa i3 "Hephestos" 10 years ago
Philip Schell fb7c636ecf Avoid compiling error
Only a missing ","... now it will compile again
10 years ago
alexborro 787d6fb61a Update RUMBA pins file
Add FAN1_PIN and SERVO0_PIN
10 years ago
Scott Lahteine 5fd5105d44 Merge pull request #1439 from clefranc/Development
Fix nozzle in temperature menu
10 years ago
AnHardt 76bf93efcb Revert "get STR_THERMOMETER from ultralcd_implementation_hitachi_HD44780.h"
This reverts commit 4d5b0e2037.
10 years ago
AnHardt 4d5b0e2037 get STR_THERMOMETER from ultralcd_implementation_hitachi_HD44780.h 10 years ago
Christian Lefrançois 33408a4dfc Update ultralcd.cpp
Fix number of nozzle displayed in temperature menu.
10 years ago
AnHardt 6e6e3cf443 merged https://github.com/MarlinFirmware/Marlin.git 10 years ago
AnHardt b3ca430a20 Inducted the defined placeholders in the translation table. 10 years ago
AnHardt e045034c3f Included Configuration.h to read the defined charsets.
Defined the charsets plus a default.
10 years ago
AnHardt 27c638803e Defined three charsets. 10 years ago
Scott Lahteine 073c59c50a Clean up some formatting
- Also partial cleanup of Marlin_main.cpp with a smidgen of Doxygen.
10 years ago
AnHardt 9a4d4b3a2f translated Deltamenu 10 years ago
AnHardt 8aa6487b4b MSG_ENDSTOP_ABORT = 'Endstop abort' > 'Endstop Abbr. Ein' 10 years ago
AnHardt 666ad7106b Translated redundand: define MSG_INIT_SDCARD and MSG_CNG_SDCARD 10 years ago
AnHardt e5c45fbe8c Infoscreen messages end with a '.' if not to long.
MSG_NO_MOVE = 'Kein Zug.' > 'Motoren Eingesch.' hat mich grau Haare gekostet.
Die englisch Meldung will sagen - Du kannst jetz am Extruder arbeiten, die
Achsen sind bockiert, die Motoren sperren die Achsen weil sie unter Strom
stehen, weil sie eingeschaltet sind.
10 years ago
AnHardt 1e22137e27 MSG_STOP_PRINT = 'Druck stoppen' > 'SD-Druck Abbruch'
to work out that this can't be resumed.
10 years ago
AnHardt 05d2ebd118 MSG_WATCH > 'Beobachten' > 'Info' 10 years ago
AnHardt 06cba91c39 eye candy 2 10 years ago
AnHardt 9352c9547f MSG_SPEED = 'Geschw' > 'Geschw.' 10 years ago
AnHardt 0dfb0162f3 eye candy. 10 years ago
AnHardt 7222b27501 MSG_MOVE_AXIS = 'Achsen bewegen' > 'Bewegen'. Is Extruder an axis? 10 years ago
AnHardt a6f808c9b1 remove unused #define MSG_RETRACT 10 years ago
AnHardt 152fa579f5 MSG_SWITCH_PS_OFF = 'Switch Power Off' -> 'Netzteil Aus' 10 years ago
AnHardt 7a32b742f3 MSG_SWITCH_PS_ON = 'Switch Power On' ->'Netzteil Ein' 10 years ago
AnHardt 4e176d2ce8 MSG_SET_ORIGIN = 'Setze Nullpunkt' ->'Setze Null hier' 10 years ago
AnHardt 1f8c8ad3ed MSG_SET_HOME_OFFSETS = 'Set home offsets' ->'Setze Home hier' 10 years ago
AnHardt 0e8836ce5e MSG_AUTO_HOME = 'Auto Nullpunkt' ->'Home' 10 years ago
AnHardt 56d3e6615d MSG_DISABLE_STEPPERS = 'Stepper abschalt.' -> 'Motoren Aus'# 10 years ago
Scott Lahteine 1258980832 Merge pull request #1429 from bq/Development
Add bq Witbox 3D printer
10 years ago
Victor Andueza 766762a4dc Change url link 10 years ago
Scott Lahteine 7df9ca051c Merge pull request #1428 from thinkyhead/issue_1388_eeprom
Make EEPROM storage consistent
10 years ago
Scott Lahteine fe3810f073 yeah, what he said 10 years ago
Scott Lahteine 6137bbd484 use eeprom read correctly 10 years ago
Scott Lahteine 9bc9051405 Flag EEPROM write errors on serial output
- Also adds a language string for the error.
- Also adds SERIAL_EOL as an alias for SERIAL_ECHOLN(“”)
10 years ago
Scott Lahteine ff99ca3040 Fix alignment of Restore following PIDTEMP
Should be reading 4 x 4 PID values instead of 4 x 3
10 years ago
Philip Schell 6c285930cb Fixing wrong pin to heater extruder 2 <-> 3
Extruder 2 and 3 was swapped
10 years ago
Victor Andueza 0d4ce27b79 Add pins_WITBOX file 10 years ago
Victor Andueza 13118cde33 Add bq Witbox 3D printer 10 years ago
Scott Lahteine 093fedfde8 Make EEPROM storage consistent
Update ConfigurationStore to always write dummy values for disabled
options, including FWRETRACT, DELTA, and SCARA. Update the EEPROM
version to “V15.” Also fixes a buffer overrun with axis_scaling in
Config_ResetDefault.
10 years ago
Scott Lahteine 34377ee512 Merge pull request #1427 from thinkyhead/fewer_preheat_strings
Remove language strings that only add a number
10 years ago
Scott Lahteine 7378a7fef4 Merge pull request #1408 from thinkyhead/cleanup_servo
Formatting cleanup of quiet sources
10 years ago
Scott Lahteine 5fbef6bed2 Merge pull request #1409 from thinkyhead/rename_lastnr
Rename lastnr to autostart_index and...
10 years ago
Scott Lahteine 53eea611b8 Fix MSG_NOZZLE 10 years ago
Scott Lahteine d7211a5324 Changes for Portuguese too 10 years ago
Scott Lahteine 0a21727c0a Portuguese (pt) and Brazilian Portuguese (pt-br) 10 years ago
Scott Lahteine c90f2e77d8 Remove language strings that only add a number
This won’t reduce the string storage in the end, but it makes the
language files smaller. Also removed remaining unused strings.
10 years ago
Scott Lahteine 2ce4a102ee Add support for Megatronics 3 a la #1426 10 years ago
Scott Lahteine ae4b348d77 Make sure _Ex_PINS is defined
Also fix analogInputToDigitalPin so it uses proper C hex notation
10 years ago
Scott Lahteine 80be6f3f91 tweak tweak 10 years ago
Scott Lahteine ebe78cb36f tweak 10 years ago
Scott Lahteine 82474fef8a Max endstop pins disabled by configuration
There’s no need to ask users to uncomment Max Endstop pins when they
have them. These will be set to -1 later if the endstop option is
disabled.
10 years ago
Scott Lahteine 8045e4d60d Add support for 4th extruder
#1405 includes some changes to pins.h for a 4th extruder. This commit
applies those changes. It also deals with a possible problem with
SENSITIVE_PINS.
10 years ago
Scott Lahteine df4f3e7712 cleanup 10 years ago
Scott Lahteine b6ecbd8cc4 cleanup 10 years ago
Scott Lahteine 4e573134de Cleanup heading 10 years ago
Scott Lahteine 574a5ab72a Split up pins to make it more manageable
Hopefully this is helpful to organization and future expansion….
10 years ago
clefranc d55c62bf9f Update ConfigurationStore.cpp
Moved #endif to allow filament settings to print.
10 years ago
clefranc e779641c73 Update ConfigurationStore.cpp
Added PIDTEMP dummy write to align EEPROM read/write operation.
10 years ago
Scott Lahteine baac6e242d Merge pull request #1419 from AnHardt/bootsplash
repair Bootsplash
10 years ago
AnHardt 75cf302da3 example configurations changed to meet Configuration.h 10 years ago
Philip Schell 61fd45a0c2 Add 4th extruder 10 years ago
Philip Schell 2650be4921 Add 4th extruder 10 years ago
Philip Schell a9763d894e Add 4th extruder 10 years ago
Philip Schell 4949088302 Add 4th extruder 10 years ago
Philip Schell fc5204bd42 Add 4th extruder 10 years ago
Philip Schell 9834818ef7 Add 4th extruder 10 years ago
Philip Schell 8696963154 Add 4th extruder 10 years ago
Philip Schell ee8a7419f4 Add 4th extruder 10 years ago
Philip Schell e18403235d Add 4th extruder 10 years ago
Philip Schell 7baee555f4 Add 4th extruder 10 years ago
Philip Schell cebc7daf2a Add 4th extruder 10 years ago
Philip Schell ef4c7abb21 Update language_es.h
Add 4th extruder
10 years ago
Philip Schell 22e591518a Update language_de.h
Add 4th extruder
10 years ago
Philip Schell a20c35bb38 Update language_ca.h
Add 4th extruder
10 years ago
Jérémie FRANCOIS dd301be52d Added suport for multiline G-code commands in the LCD menus 10 years ago
AnHardt aa48056c03 Made centering of bootlogo work and removed contraproductiv setScale2x2() in dogm_lcd_implementation.h 10 years ago
AnHardt 0d219b3e14 Make centering of STRING_SPLASH work 10 years ago
AnHardt 59315330dd Remove definition of VERSION_STRING and replace where usend with STRING_VERSION 10 years ago
AnHardt 8c792c7b22 Make STRING_VERSION and VERSION_STRING the same 10 years ago
Scott Lahteine 865ca0ef04 Merge pull request #1405 from MagoKimbra/4th-extruders
All the additions look proper. I can't think of any other extruder-count-related items that you might have missed. So, with some optimism, I will merge this for testing.
10 years ago
MagoKimbra 3021f7f743 Fix PID_dT
Add PID_dT in temeprature.cpp
10 years ago
Scott Lahteine a7b02975b7 No TEMP1 or TEMP2 pins for TEENSYLU || PRINTRBOARD
Pins 2 and 3 are probably general-use pins, since the filament sensor
uses pin 2.
10 years ago
Scott Lahteine 6723388f7f Proposed fix to #1379. Printrboard I2C LCD support 10 years ago
Scott Lahteine 03c9cb60e8 Rename lastnr to autostart_index and...
Replace instances of the number 13 with FILENAME_LENGTH where
appropriate.
10 years ago
MagoKimbra ef5959a705 Fix Temperature
Githun insert this line when i merge with actual Branch development...
10 years ago
MagoKimbra 3d4ee6c868 Merge branch '4th-extruders' of https://github.com/MagoKimbra/Marlin into 4th-extruders
Conflicts:
	Marlin/temperature.cpp
10 years ago
MagoKimbra 986e723eeb Add 4th extruder 10 years ago
Scott Lahteine f16bdd2ff2 Borrow from Ultimaker to fix MAX6675 SPI conflict
Changes to temperature.cpp from Ultimaker fork, intended to address
#1226 and #1227
10 years ago
Scott Lahteine 06c3b37933 Formatting cleanup of quiet sources
Formatting for code-folding plus minor style changes to less active
code.
10 years ago
Scott Lahteine 23fcd1ecb2 Merge pull request #1407 from thinkyhead/cleanup_marlinserial
Formatting cleanup of quiet sources
10 years ago
Scott Lahteine fd78902194 Formatting cleanup of quiet sources 10 years ago
Scott Lahteine 5c1814383a Merge pull request #1390 from floyd871/Development
Show Custom M_Code for Z-Probe Offset when entering M503
10 years ago
MagoKimbra 0ebf896070 Add 4th extruder 10 years ago
Michael Neumann a9d7ab9530 Update ConfigurationStore.cpp
Done
10 years ago
Scott Lahteine 3a9a3e5ed8 Fix Issue #1356 – remove EXTRUDER1_Z_OFFSET
This define is not used.
10 years ago
Scott Lahteine 54d5b52a2e Merge pull request #1399 from beanz/use-bed-defines-not-extruder-ones
Code wont compile with extruder but without bed runaway protection defined.
10 years ago
Mark Hindess 0ce252ba7a This ifdef is for bed code so should use bed constants for testing.
Without this fix, the code wont compile with extruder but without bed
runaway protection defined.
10 years ago
Scott Lahteine 9040446780 Merge pull request #1395 from AnHardt/iss1394
removed function step_wait() from stepper.cpp
10 years ago
Scott Lahteine 25f79c5010 Merge pull request #1391 from CONSULitAS/Development-newBoard_K8200
Add: Board for Vellemann K8200 (derived from 3Drag)
10 years ago
Scott Lahteine 9ce75ab7de Merge pull request #1386 from roglio/Development
Fixing a build error for melzi and gfx display
10 years ago
Scott Lahteine 15a00a5a7c Add 1µs delay in other appropriate spots 10 years ago
AnHardt 23cb899c5a removed function step_wait() from stepper.cpp
removed function step_wait() from stepper.cpp because its used nowhere.
10 years ago
Scott Lahteine d9d4a78e0f Add proper delay in stepper.cpp
Issue #1385 describes a delay that the compiler is optimizing out and
this solution.
10 years ago
CONSULitAS d1322dafc9 Add: Example Configuration for Vellemann K8200 - based on new BOARD_K8200 #1391
# Add: Example Configuration for Vellemann K8200 - based on new
BOARD_K8200 #1391

* K8200: new folder in example_configurations for Vellemann K8200 (3Drag
clone - should work with 3Drag http://reprap.org/wiki/3drag, too. Please
report)
* K8200/Configuration.h/Configuration_adv.h: updated manually with
parameters form genuine Vellemann Firmware "firmware_k8200_marlinv2"
based on the recent development branch

I tested the changes on my K8200 with 20x4-LCD and Arduino 1.0.5 for
Windows (SD library added to IDE manually) - everything works well
10 years ago
CONSULitAS 3b50a5e2e6 Add: Board for Vellemann K8200 (derived from 3Drag)
## Add: Board for Vellemann K8200 (derived from 3Drag)

* Boards.h: updated comment for board 3Drag - K8200 removed
* Boards.h: added `BOARD_K8200` with ID 78

* language.h.: machine name and firmware URL for new board

* pins.h: added `K8200` to any `#if` with `3Drag` and corresponding
comments
10 years ago
Michael Neumann 2d454da3af Update ConfigurationStore.cpp
Show Custom M Code when entering M503
10 years ago
Scott Lahteine 4f35de991a Merge pull request #1383 from CONSULitAS/Development
Update Boards.h for Vellemann K8200 - comment only
10 years ago
roglio 22571ca13d Revert "Configuration for Aurora Z605"
This reverts commit 935ee968a7.
10 years ago
roglio 935ee968a7 Configuration for Aurora Z605
Still not fine tuned but working.
10 years ago
roglio ccdbeda526 Fixing a build error for melzi and gfx display
When a melzi board and a full gfx are both selected, the build fails
blaming for some missing defines.

This is a fix for the issue: now my configuration works.
10 years ago
CONSULitAS e13f159343 Update Boards.h for Vellemann K8200 - comment only
## Update Boards.h for Vellemann K8200 - comment only

* Boards.h: updated comment for board 3Drag - K8200 uses same board
10 years ago
CONSULitAS 51c7f2fd5a Revert "## Add: Example Configuration for Vellemann K8200"
This reverts commit 5333590ac2.
10 years ago
CONSULitAS 5333590ac2 ## Add: Example Configuration for Vellemann K8200
* K8200: new folder in example_configurations for Vellemann K8200 (3Drag
clone - should work with 3Drag too, please report)

* K8200/language.h: updated machine name and URL for K8200

* K8200/Configuration.h/Configuration_adv.h: updated manually with
parameters
form genuine Vellemann Firmware "firmware_k8200_marlinv2" based on the
recent development branch

* K8200/files by Vellemann: added folder with original files from
Vellemann homepage, since there is no GitHub fork you could link to by
them

I tested the changes on my K8200 with 20x4-LCD and Arduino 1.0.5 for
Windows - everything works well
10 years ago
Denis Chertykov ba3ac40b9d Remove hardcoded programmer option (-cwiring). Use variable AVRDUDE_PROGRAMMER.
Change default value of AVRDUDE_PROGRAMMER to 'wiring'.
10 years ago
daid 53f971095d Revert "Reduce PROGMEM warnings" 10 years ago
PxT 67b597ad46 Update printrboard pin assignments
Backported from Printrbot branch, allows the fan to work correctly.
10 years ago
galexander1 d4880a9e60 Revert "Move Sd library out into library" 10 years ago
Bo Herrmannsen ccdb086fc8 Merge pull request #1363 from PxT/patch-1
Fixes #1361
10 years ago
Bo Herrmannsen 5151db5c2f Merge pull request #1349 from msutas/patch-2
Improvement - G29 Option for Not Retracting Servo
10 years ago
Bo Herrmannsen 1746b2582b Merge pull request #1332 from Sniffle/Development
Rambo FAN_PIN documentation and servo support
10 years ago
Bo Herrmannsen 4b51b5a46d Merge pull request #1357 from odewdney/SDlib
Move Sd library out into library
10 years ago
Bo Herrmannsen f2cb4a3655 Merge pull request #1353 from thawkins/Development
fix avrdude upload in makefile
10 years ago
PxT 9fd4292923 Fixes #1361 10 years ago
odewdney f84ff4ba7d Move SD Fat library out of main src 10 years ago
Bo Herrmannsen ab074dac17 Merge pull request #1344 from grob6000/independent_pid
Independent PID parameters for each extruder
10 years ago
Bo Herrmannsen d4a665694a Merge pull request #1350 from odewdney/Development
Reduce PROGMEM warnings
10 years ago
odewdney 9d9c859ac1 First move of SdFat library 10 years ago
Tim Hawkins 5045d17a39 fix avrdude upload in makefile 10 years ago
msutas 3a5a6f42fb Corrected the ABL grid option
G29 E was not retracting the probe on the last probe point when used with ABL grid. Corrected.
10 years ago
odewdney cd55a93a13 re-add blank line 10 years ago
odewdney 23bfe30036 moved include themister to temperature.c 10 years ago
odewdney 538859669d Removing compiler warnings for progmem 10 years ago
grob6000 bf2c923db5 Make multiple PID parameters a config option
* Adds config parameter `PID_PARAMS_PER_EXTRUDER` - allows single PID
parameters to be used where this would be preferable (e.g. dual
identical extruders)
* When disabled, will use `float Kp, Ki, Kd, Kc;` as before.
Preprocessor macros used to switch between.
* ultralcd.cpp defines extra menus for extra parameters only where
required
* M301 reports `e:xx` only if independent pid parameters enabled
* EEPROM structure still leaves space for 3 extruders worth, when undef
will save single parameter to all extruder positions, but only read the
first
* Switching off saves approx 330 B with no LCD enabled, 2634B with LCD
(RRD) enabled: this is significant.
* LCD modifications should be tested.
10 years ago
grob6000 0877aa0fe0 Merge remote-tracking branch 'upstream/Development' into independent_pid 10 years ago
msutas e0beb98fd3 Improvement - G29 Option for Not Retracting Servo
This change introduces an improvement to G29 command on Marlin.

Auto bed leveling operation's reliability is based on the repeatability of the Z-probe switch and the servo. This change introduces an option to G29 command. When the G29 command is sent with an "e" option, during auto bed levelling the servo is not retracted between probes which decreases the bias on auto bed levelling resulting from servo.

G29 command does the auto bed probing as it is.

G29 E command engages the servo on first probing point, probes all points and retracts the servo after probing the last point.

Please comment your opinions, test on your printer and check the code on a programmer's perspective. (I am not a good programmer.)
10 years ago
grob6000 7d32c7f36d Multiple PID parameter edit for ultralcd
* Depending on extruder count, will add menu items for ultralcd to edit
individual PID parameters for each extruder
* Added menu items to each language_xx.h
* Builds OK, but recommend testing with typical LCD
10 years ago
Steffen Vogel 69dc411ae0 Merge branch 'Development' of github.com:MarlinFirmware/Marlin into LogoLCD
Conflicts:
	Marlin/dogm_lcd_implementation.h
10 years ago
grob6000 3e2af67ce3 Fix R-H compatibility
* R-H reads incorrect M301 line from EEPROM output if more than one is
present. Reverted to original output format, using only E0 value.
10 years ago
grob6000 37c7e8300f Independent PID parameters for each extruder
* Variables Kp, Ki, Kd, Kc now arrays of size EXTRUDERS
* M301 gains (optional, default=0) E parameter to define which
extruder's settings to modify. Tested, works with Repetier Host's EEPROM
config window, albeit only reads/updates settings for E0.
* All Kp, Ki, Kd, Kc parameters saved in EEPROM (version now v14), up to
3 extruders supported (same as Marlin in general)
10 years ago
Scott Lahteine 326b925557 DOGLCD and LCD_PROGRESS_BAR to coexist
Small changes (and formatting to confuse the diff’er) which first
allows DOGLCD and LCD_PROGRESS_BAR to be enabled in tandem, then a
#warning (rather than error) that the extra progress bar / message
options don’t apply to graphical displays at this time. This leaves
open perhaps combining the progress bar and message area in some future
(or forked custom) graphical LCD display arrangement (at which time the
relevant variables may be moved into ultralcd.cpp with externs in
ultralcd.h). I also added a conditional error that the progress bar and
the filament display may not work well together.
10 years ago
Erik van der Zalm 1aade4a8e2 Merge branch 'Development' of https://github.com/MarlinFirmware/Marlin into Development 10 years ago
Erik van der Zalm 8a2e84e3f1 Possible fix for FWRETRACT with 0 zlift. 10 years ago
Steffen Vogel 905aab3b85 added missing #endif 10 years ago
Steffen Vogel b9cf1465a7 updated LCD bouts with new strings and bitmaps
new version is pretty generic and should work in most scenarios
10 years ago
Steffen Vogel c7632be5cc added high and low resolutions version of splash screen logo (saving code size) 10 years ago
Steffen Vogel 8f0dba7cbf adding string for bouts splash string to config 10 years ago
Bo Herrmannsen d94109e886 updated logo post and ver info 10 years ago
Bo Herrmannsen cd33b5b062 changed logo and ver info
logo is now 110 pixels wide and starts 9 pixels in from top left corner and also 9 pixels down from same corner... this will give a 9 pixel border all way round

ver info is placed centered and there is a 9 pixel from bottom of display to ver info
10 years ago
Bo Herrmannsen 9b6c1cfda6 removed unneeded lines in welcome msg 10 years ago
Bo Herrmannsen ffa09f86f4 moved ver info 5 spaces to the right 10 years ago
Alex Borro 2bbb68be8a Fix calculation of BAL grid fitting into the bed
The previous calc was wrong. Between N points there are only N-1 gaps,
not N.

So changing AUTO_BED_LEVELING_GRID_POINTS to
(AUTO_BED_LEVELING_GRID_POINTS-1)
10 years ago
Bo Herrmannsen 590caafa2d changed ver info 10 years ago
Bo Herrmannsen 3bb9b31515 changed boot logo a bit to test if fat wall goes away 10 years ago
Steffen Vogel da192c521f Merge pull request #1333 from andrewsil1/development
Fix grammar/typos in new Configuration.h option
10 years ago
Erik van der Zalm 3a30d45c2e Revert "issue 968 for dev branch" 10 years ago
andrewsil1 269ec9f87f Fix grammar/typos in new Configuration.h option
(For the SLOW_PWM_HEATERS option)
10 years ago
Todd Swindoll 506353892e Rambo Pin documentation and servo support
Updated pins reference and servo support.

cross referenced between Rambo 1.1, 1.2, and 1.3
10 years ago
Steffen Vogel 8d7bfd03d8 moved/renamed documentation stuff to top-level directory 10 years ago
Bo Herrmannsen 3c9e6b7b62 added link for pic to hex converter 10 years ago
Bo Herrmannsen 0e760274bd changed reprap logo to marlin logo 10 years ago
Bo Herrmannsen b291a422e9 added square png version of logo
406*406 pixels
10 years ago
Luis E Alvarado 7ae548cf34 Update Marlin Firmware URL 10 years ago
Erik van der Zalm 8f9067faa6 Added marlin logos. (Designed by Ahmet Cem TURAN) 10 years ago
Bo Herrmannsen addf52fd4a Merge pull request #1328 from DinoMesina/development
Some corrections and new features
10 years ago
Dino Del Favero 5cfe13f240 Correct some mistakes 10 years ago
Dino Del Favero c7e2d73039 Merge branch 'development'
ok
10 years ago
Alex Borro 422a958a34 Fix CoreXY speed calculation
For cartesian bots, the X_AXIS is the real X movement and same for
Y_AXIS.
But for corexy bots, that is not true. The "X_AXIS" and "Y_AXIS" motors
(that should be named to A_AXIS
and B_AXIS) cannot be used for X and Y length, because A=X+Y and B=X-Y.
So we need to create other 2 "AXIS", named X_HEAD and Y_HEAD, meaning
the real displacement of the Head.
Having the real displacement of the head, we can calculate the total
movement length and apply the desired speed.
10 years ago
Dino Del Favero 038fccd7a1 I have added some code in the "temperature.cpp" for have the possibility of control the time of the states with the heater drived by relays, with this feature now it is possible use PID function in conjunction with relay to control the temperature. I have made some tests and the temperature stay always in the range of +-1°C from the setted temp.
There is the possibility of turn on this features adding "#define SLOW_PWM_HEATERS" in Configuration.h
10 years ago
DinoMesina 6730335657 Update Configuration.h 10 years ago
Bo Herrmannsen 4ffecdbf7d Merge pull request #1313 from wgm4321/Development
Re-enable filament menu with recalc fix when enabling/disabling mm3
10 years ago
Steffen Vogel 672f764b4d replaced ASCII GPL v3 license by markdown version
moved new COPYING file to top-level directory to make it more visible and remove clutter from Marlin subduer
10 years ago
Steffen Vogel f25e793cff rename stepper lookup table scipt to be consistent with termistor lookup table script 10 years ago
Steffen Vogel df17a6a1b4 fix #1305 by proposed workaround (thanks gaby64) 10 years ago
Steffen Vogel f7e65935fb make use of power operator 10 years ago
Steffen Vogel 4e02aff9b5 automatically determine min/max temp for terminator 10 years ago
Steffen Vogel 81363bc441 more cleanups 10 years ago
Steffen Vogel 95f4a55820 refactored termistor table calculation to be in line with wikipedia's article about Steinhart-Hart coefficients 10 years ago
Steffen Vogel 21205cc3d8 more cleanups in the termistorTable generation script 10 years ago
Steffen Vogel fb0996b5db improved output aligment and precision 10 years ago
Steffen Vogel 538231edfd cosmetic whitespace cleanup and comments added/updated 10 years ago
wgm4321 067b509479 Re-enable filament menu with recalc fix when enabling/disabling mm3 10 years ago
wgm4321 a19f2f8ae7 Disable volumetric menu item due to missing recalc of of multipliers when enabled/disabled 10 years ago
wgm4321 f24dda9700 Revert "Make sure volumetric multipliers are recalc'ed during menu enable/disable of mm3"
This reverts commit dd7e4ee97f.
10 years ago
wgm4321 ec4681ab6b Revert "Add "Detailed Z Probe" menu item with ABL is defined."
This reverts commit 2b9722f387.
10 years ago
wgm4321 dd7e4ee97f Make sure volumetric multipliers are recalc'ed during menu enable/disable of mm3 10 years ago
wgm4321 2b9722f387 Add "Detailed Z Probe" menu item with ABL is defined. 10 years ago
Dan Royer 9472bbe51d issue 968 for dev branch
try, try again.

If 'OK' is garbled on sending PC won't receive it.  Both machines will
wait on each other forever.  This resends OK if nothing is heard from PC
for a while to avoid this bad case.
10 years ago
alexborro d2b6e62996 Merge pull request #1309 from philfifi/fix_temp_runaway
temp runaway: proper cast to prevent any overflow.
10 years ago
Philippe L 30248214c7 temp runaway: proper cast to prevent any overflow. 10 years ago
Bo Herrmannsen c5f138ea07 Merge pull request #1291 from alhirzel/Development
Define analogInputToDigitalPin only if needed
10 years ago
odewdney 652895d656 try different proproc for CI failure 10 years ago
Bo Herrmannsen 3d9f4ac757 Merge pull request #1303 from wgm4321/Development
Fix for cant compile when REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER ...
10 years ago
wgm4321 04fb34c7ff Add English defines for filament menu to non-English to prevent compile errors until translated 10 years ago
wgm4321 f8aa5ff771 Fix for cant compile when REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER defined 10 years ago
odewdney 39fae9e3a3 Fix progmem warning
Borrow code from https://github.com/arduino/Arduino/issues/1793
10 years ago
Alexander Hirzel f36fd3ddec Merge branch 'Development' of https://github.com/ErikZalm/Marlin into Development 10 years ago
Scott Lahteine b5e50cdd4e Move scripts and documentation to subfolders 10 years ago
Alexander Hirzel eed451e034 rework analogInputToDigitalPin definition 10 years ago
Lane Roberts 1f520a5a8c Due to the fix for #1248, X and Y probe offsets must not be floats.
The compiler does not support comparing float values: "error: floating constant in preprocessor expression"
The loss in X/Y precision shouldn't matter for Z probes, as most microswitches or inductive sensors are larger than 1mm square anyway.
10 years ago
wgm4321 b32be2dc64 Fix syntax error caused by previous changes. 10 years ago
wgm4321 edac64e7d2 Add Filament menu and add Filament/Retract settings to config store. 10 years ago
Alexander Hirzel ecda6cdc0a Fix typo, PID_BED_POWER -> MAX_BED_POWER 10 years ago
David Forrest f3e503e725 temperature.cpp: Fix typo of PID_MAX to MAX_BED_POWER for the bed. 10 years ago
David Forrest 1d5d853c9a temperature.cpp: Fix typo of MAX_BED_PID to MAX_BED_POWER. 10 years ago
Bo Herrmannsen 63da6900b0 Merge pull request #1282 from vandarin/Development
Due to the fix for #1248, X and Y probe offsets must not be floats.
10 years ago
Bo Herrmannsen a18b625534 Merge pull request #1261 from wgm4321/Development
Add Filament menu and add Filament/Retract settings to config store.
10 years ago
Alexander Hirzel ae12ad0d6c Fix typo, PID_BED_POWER -> MAX_BED_POWER 10 years ago
alexborro 80b17ab573 Merge pull request #1285 from drf5n/PID_CI_v2
temperature.cpp: Fix typo of MAX_BED_PID to MAX_BED_POWER.
10 years ago
David Forrest 625860f086 temperature.cpp: Fix typo of PID_MAX to MAX_BED_POWER for the bed. 10 years ago
David Forrest 6583bb781d temperature.cpp: Fix typo of MAX_BED_PID to MAX_BED_POWER. 10 years ago
Lane Roberts 2701dd8a17 Due to the fix for #1248, X and Y probe offsets must not be floats.
The compiler does not support comparing float values: "error: floating constant in preprocessor expression"
The loss in X/Y precision shouldn't matter for Z probes, as most microswitches or inductive sensors are larger than 1mm square anyway.
10 years ago
Grogyan 6b82415c81 Update pins.h
Somehow the pin definitions for the MAX6675 Slave Select/Chip Select got changed back to the hardware SPI SS/CS.  
Pin 49 cannot be used as that is used by the SD card socket to detect if an SD card is present.
Pin 53 is the Hardware SPI SS, which is dedicated, nicely, to the SD card SS and therefore cannot be used as the MAX6675 SS
Pin 66 is in Aux2 port adjacent to the Hardware SPI interface port on RAMPS 1.4, and is currently not used for anything.
10 years ago
Bo Herrmannsen 692a01b1c7 Merge pull request #1277 from thinkyhead/fix_regressions
Fix regressions affecting compilation
10 years ago
Scott Lahteine 2ec2bf1564 Fix regressions affecting compilation
This fixes two regressions, caused by #1167 and #1191 .
10 years ago
Scott Lahteine e7db8ee9e5 ftostr32np > ftostr32sp
sp=space-padded, similar to: ns=no-sign
10 years ago
Scott Lahteine 10e1b6ef8b Least stack-usage self-contained ftostr32np()
This is the optimal code for a self-contained formatter, although the
original code is crafty in being smaller and simpler, and can be
evaluated as using the original output as a scratch pad for state,
making the final formatter more straightforward. While this code is
longer, all code-paths are minimal.
10 years ago
Scott Lahteine d1f21d1189 As it should be 10 years ago
Scott Lahteine 449dad71f2 Least stack-usage self-contained ftostr32np()
This is the optimal code for a self-contained formatter, although the
original code is crafty in being smaller and simpler, and can be
evaluated as using the original output as a scratch pad for state,
making the final formatter more straightforward. While this code is
longer, all code-paths are minimal.
10 years ago
Scott Lahteine a2109cb492 Patch to make Z look more like X and Y on UltraLCD 10 years ago
Bernhard Kubicek 3d1da45f3e Update Marlin.h 10 years ago
bkubicek d02daec08f fixed compilation 10 years ago
Caleb Anderson 991a74b75b Move delta calibration menu to sample delta configuration.
Turn off by default.
10 years ago
Bo Herrmannsen 67fd8f0727 Merge pull request #1267 from RobotCaleb/LanguageFix
Language Fix - Using the new language implementation wasn't behaving as expected.
10 years ago
Caleb Anderson 236db44669 Fix spacing 10 years ago
Caleb Anderson e6774fb7d2 Using the new language implementation wasn't behaving as expected.
No matter what LANGUAGE_CHOICE was set to it would always take the en branch.
I revamped it a bit to use a macro to create the language include file name. This required a slight tweak to the RU declaration since it's special-cased in a couple places in code.

This is an attempt to pull my changes from #1222 over.
10 years ago
Caleb Anderson cb047e9070 Actual menu change. Moved menu logic to not be shown unless not currently printing. (untested but straight-forward, printer in a bad state currently) 10 years ago
Caleb Anderson 5b336a4cdb Delta calibration menu based on http://minow.blogspot.com/index.html#4918805519571907051
To test/enable, uncomment the #define DELTA_CALIBRATION_MENU in Configuration.h
10 years ago
Bernhard Kubicek 10ad9f1062 Addes servo0 pin ultimaker 10 years ago
Bernhard Kubicek f24c5d82e3 Update Marlin_main.cpp
fixed minor typo
10 years ago
Wurstnase 8a6f098cc6 Expand manage_inactivity #1264
void manage_inactivity(bool ignore_stepper_queue=false)

standard is false so it is not necessary to change additional code. this
change should be better, hopefully nophead like this :)
10 years ago
Wurstnase d1995aec7a Rename ignore_blocks_queued
more speaking name
10 years ago
Wurstnase 4122de9d17 change filament issue
make a more general solution
10 years ago
wgm4321 d60efc3b5d Fix syntax error caused by previous changes. 10 years ago
wgm4321 cb12161191 Add Filament menu and add Filament/Retract settings to config store. 10 years ago
fmalpartida ec33df0554 Merge branch 'SAV-MkI_merge' into Development
Tested for SAV MKI and SAV 3D LCD on lewihe.
10 years ago
Matthew Schick 0468f81950 Update for pull request #837 10 years ago
Matthew Schick 6e42c9e305 Add fwretract settings to M503 output 10 years ago
alexborro 3afe66bb0c Fix issues #1248, #1240
- Fixed issue when BAL area probing is shorter than it should be for
grid probing
- Warning when BAL activated with Delta Kinematics
- Fix XY_TRAVEL_SPEED when homing Z axis
10 years ago
Lukas Obermann 9eb6df17a7 Consider negative Z Offsets when auto bed leveling is active 10 years ago
Bo Herrmannsen c9f60183a9 Merge pull request #1233 from NarimaanV/Development
Fixed BABYSTEPPING feature
10 years ago
Bo Herrmannsen 0d957872a0 Merge pull request #1234 from gregrebholz/issue_1069
Fixes #1069.  Added "auto fan" checks to PID_autotune.
10 years ago
Bo Herrmannsen 9c07d28bd6 Merge pull request #1249 from drf5n/PID_CI_v2
temperature.cpp: Add Conditional Integration to prevent excessive integral windup
10 years ago
Bo Herrmannsen 23e768dffa Merge pull request #1250 from chertykov/Development
Move initialization of errormagic[] and echomagic[] to Marlin_main.cpp
10 years ago
Scott Lahteine 2f467e2797 LCD Progress Bar 10 years ago
Denis Chertykov 050ca9ca13 Move initialization of errormagic[] and echomagic[] to Marlin_main.cpp 10 years ago
David Forrest cf52c48d19 Configuration.m: Set PID_INTEGRAL_DRIVE_MAX from PID_MAX from BANG_MAX.
Current defaults are all 255.  If it makes sense to reduce them, they should come down together, and
be in a  PID_INTEGRAL_DRIVE_MAX <= PID_MAX <- BANG_MAX relationship.
10 years ago
David Forrest 984177c40c temperature.cpp:Add PID Conditional integration on heated bed. 10 years ago
David Forrest c9b8435749 heater.c: Limit PID I term with conditional integration. 10 years ago
Greg Rebholz 7ecb7cbd46 Added "auto fan" checks to PID_autotune 10 years ago
NarimaanV 7667949aca Fixed BABYSTEPPING feature
Moved PSTR() macro to correct place which was causing the " initializer fails to determine size of '__c' " when attempting to compile with BABYSTEPPING enabled.
10 years ago
alexborro d74aabf259 Revert "Change Auto_Bed_Leveling to Auto_Bed_Compensation" 10 years ago
Bo Herrmannsen 60628864ca Merge pull request #1167 from thinkyhead/sd_freemem
Use SdFatUtil::FreeRam() for freeMemory() if there
10 years ago
Bo Herrmannsen 889d7ba218 Merge pull request #1177 from martin-pr/probing_z_speed
Split do_blocking_move() to XY and Z sections
10 years ago
Bo Herrmannsen 5e7bd2dc87 Merge pull request #1200 from chertykov/Marlin_v1
Fix syntax errors in #ifdef
10 years ago
Denis Chertykov b086394178 Fix syntax errors in #ifdef. 10 years ago
John Davis 39d28a9bbf Update qr_solve.h
Changed level to compensation
10 years ago
John Davis 6325968a39 Update qr_solve.cpp
Changed leveling to compensation
10 years ago
John Davis e99f24ff2f Update planner.h
Changed level and leveling to compensation.
10 years ago
John Davis ac204028e7 Update planner.cpp
Changed level and leveling to compensation
10 years ago
John Davis 4315c2547a Update Marlin_main.cpp
Changed level and leveling to compensation (except with "verbose_level" and "lcd_reset_alert_level").
10 years ago
John Davis f21c65918f Update Servo.h
Changed AUTO_BED_LEVELING to AUTO_BED_COMPENSATION
10 years ago
John Davis 58c4473bea Update Servo.cpp
Changed AUTO_BED_LEVELING to AUTO_BED_COMPENSATION
10 years ago
John Davis 825c46024d Update vector_3.cpp
Changed AUTO_BED_LEVEL to AUTO_BED_COMPENSATION
10 years ago
John Davis cfe80e1def Update vector_3.h 10 years ago
John Davis 7464d3c96a Update ConfigurationStore.cpp
Changed AUTO_BED_LEVEL to AUTO_BED_COMPENSATION
10 years ago
John Davis 81568c3c6d Update Configuration.h
Changed Auto Bed Level to Auto Bed Compensation
10 years ago
Bo Herrmannsen 03e489aaad Merge pull request #1197 from foosel/fix/issue_1147
Fixes commands not being acknowledged in the same order they are received in
10 years ago
Gina Häußge acc0e75279 Fixes commands not being acknowledged in the same order they are received
in

G0 to G3 were previously acknowledged in the get_command method, causing
them to be possibly acknowledged before commands coming after them that
were acknowledged in process_commands.

This patch fixes this, moving the acknowledgement of G0 to G3 to the
process_commands method as well. These commands are therefore no
longer acknowledged when the enter the cmd_buffer but instead only
acknowledged when the enter the plan_buffer.

Guaranteeing that commands are acknowledged in the same order in which
they were received by the firmware allows host software to be able to
track the life cycle of commands and such a better management of the
firmware's serial buffers as well as better internal command processing
and response parsing without having to depend on throwing an epic
amount of regular expressions against each line received back from the
firmware.

Fixes ErikZalm/Marlin#1147
10 years ago
daid 17de96ace7 Merge branch 'Marlin_v1' into revert-1154-sd_sorting
Conflicts:
	Marlin/cardreader.cpp
	Marlin/cardreader.h
10 years ago
Scott Lahteine 6880e93b75 Happy configs 10 years ago
Scott Lahteine 3b1f186c0c Clean up configs 10 years ago
Scott Lahteine f83d0f2a68 Defines for electronics boards
Added boards.h which contains defines for all the board numbers, plus
some shorthand macros for less typing.
10 years ago
Bo Herrmannsen bd25e7393b Merge pull request #1192 from thinkyhead/split_language
Split up languages.h. Use ISO language codes.
10 years ago
Bo Herrmannsen 174f8d3631 Added example configs for printers from http://tvrrug.org.uk/ 10 years ago
Scott Lahteine e970461adb Clean up, move unused to the bottom, add headings 10 years ago
Scott Lahteine 0c06e97e98 Split up languages.h, use ISO codes
Breaking up languages.h makes it easier to translate. Using language
codes makes it easier to select a language and sets the naming standard.
10 years ago
Bo Herrmannsen a9c334e8bc Merge pull request #1191 from thinkyhead/code_shrink
Shrink and Optimize
10 years ago
Bo Herrmannsen 842da54e68 Merge pull request #1187 from thinkyhead/fix_constants
A few constants where they belong
10 years ago
Scott Lahteine 07c6b5ab71 Using axis constants 10 years ago
Scott Lahteine 1857e611d3 Other small tweaks 10 years ago
Scott Lahteine 63e1665fa9 Reduce ultralcd.cpp redundancies 10 years ago
Scott Lahteine e69313fc2b Reduce dogm lcd code 10 years ago
Bo Herrmannsen bd22405412 Merge pull request #1190 from thinkyhead/sd_sorting
Wrap call to flush_presort
10 years ago
Scott Lahteine 49791949af Wrap call to flush_presort 10 years ago
Scott Lahteine 0450e83fa5 Use SdFatUtil::FreeRam() for freeMemory() if there 10 years ago
Scott Lahteine f21cce0b28 Rebase to Marlin_v1 10 years ago
Scott Lahteine e4b98011cf And one more... 10 years ago
Scott Lahteine 60598b4cdd A few constants where they belong 10 years ago
Bo Herrmannsen 280504e2e0 Merge pull request #908 from alromh87/Marlin_v1
Support for Gen3 Monolithic electronics
10 years ago
Bo Herrmannsen 31ca3de72f Merge pull request #819 from neildarlow/Marlin_v1
Activate LiquidTWI2 device detection and space-pad LCD status line.
10 years ago
Bo Herrmannsen e83cfc0a62 Merge pull request #1163 from thinkyhead/lcd_abort_message
LCD "Abort" Message
10 years ago
Bo Herrmannsen 0b310ab6c5 Merge pull request #1153 from xinfab/negative_values_in_menu
Negative values in menu
10 years ago
Bo Herrmannsen 91d740e128 Merge pull request #1141 from filipmu/Filament-Sensor
Display filament sensor data on a 20x4 LCD or Graphical LCD
10 years ago
alexborro ab355a90d3 Revert "SD Sort and Buffer" 10 years ago
Scott Lahteine d088b5f30f Remove debug echo 10 years ago
Scott Lahteine 1fad8e6a81 Proper long file name var 10 years ago
Scott Lahteine 29e854c535 Disable SDCARD_SORT_ALPHA by default
For legacy boards it’s better if this option is disabled.
10 years ago
Scott Lahteine 6599adc184 Polish up a little... 10 years ago
Scott Lahteine a12eec33e2 Completed SORT_USES_MORE_RAM implementation
For the MORE_RAM option we need to buffer both the short and long
names, even though long names are sometimes redundant. Worst case, all
the names are max length. We can save some RAM by not storing these. We
could save more RAM by only storing the visible part of the long name.
10 years ago
Scott Lahteine c9486ebb85 Improvements, more SORT_USES_MORE_RAM
With this option, always keeps the dir in RAM, doubling as a cache for
getfilename. A board with only 8K of SRAM is cutting it very close.
10 years ago
Scott Lahteine b6ffea612a Expand on More RAM concept, address minor bugs 10 years ago
Scott Lahteine 8196b36ad9 SD Card Alpha Sorting
First iteration of alphabetical sorting for SD cards, both
slow+efficient and fast+rammy. Option for folders to sort first, last,
or not at all.
10 years ago
Scott Lahteine cf749dbeda Completed SORT_USES_MORE_RAM implementation
For the MORE_RAM option we need to buffer both the short and long
names, even though long names are sometimes redundant. Worst case, all
the names are max length. We can save some RAM by not storing these. We
could save more RAM by only storing the visible part of the long name.
10 years ago
Scott Lahteine ae081d0fe0 Improvements, more SORT_USES_MORE_RAM
With this option, always keeps the dir in RAM, doubling as a cache for
getfilename. A board with only 8K of SRAM is cutting it very close.
10 years ago
Scott Lahteine 785143a013 Expand on More RAM concept, address minor bugs 10 years ago
Scott Lahteine 0cbbba08bd SD Card Alpha Sorting
First iteration of alphabetical sorting for SD cards, both
slow+efficient and fast+rammy. Option for folders to sort first, last,
or not at all.
10 years ago
Scott Lahteine 3ebfd29312 Print a message when printing is aborted
Messages in gcode files like “M117 Printing…” were not being cleared on
Stop Print.
10 years ago
Martin Prazak 2ef0669b19 Split do_blocking_move() to XY and Z sections to make sure that the Z homing feedrate is not exceeded 10 years ago
Neil Darlow 64139f5e5a Merge https://github.com/ErikZalm/Marlin into Marlin_v1 10 years ago
Bo Herrmannsen edfcf3b527 Toshiba Stepper Driver support
Tosh stepper drivers need to be driven slower, so the stepper code
was interleaved to separate the pin HIGH from the pin LOW. This adds
enough instructions to make it work, without needing nops.
10 years ago
Bo Herrmannsen c429a4b3ec Toshiba Stepper Driver support
Tosh stepper drivers need to be driven slower, so the stepper code
was interleaved to separate the pin HIGH from the pin LOW. This adds
enough instructions to make it work, without needing nops.
10 years ago
nothinman 1977b4490f Merge pull request #1159 from thinkyhead/lcd_wait_better
M0/M1 Message Fix
10 years ago
Scott Lahteine 7562183efc Skip over spaces first 10 years ago
nothinman 5a8b3a84ae Merge pull request #1155 from thinkyhead/lcd_wait_better
M0-M1 Enhancements
10 years ago
elgambitero 433ac29d31 Updated a bit of spanish language 10 years ago
Scott Lahteine 12b51d6060 Ignore S and P if no value >0 is included. 10 years ago