3043 Commits (a0f6407d6a3cd2a56d9f1b3fbf2e3c847e9efcd4)

Author SHA1 Message Date
Scott Lahteine 2b30e8ac99 Conditionals for ULTIPANEL without SDSUPPORT 9 years ago
Scott Lahteine 7c7a4051fe Disable SDSUPPORT by default
As noted in #133 you can’t disable `SDSUPPORT` with `MAKRPANEL`,
`PANEL_ONE`, `MINIPANEL`, or `ULTIPANEL`. This patch makes it possible
to disable `SDSUPPORT` on these controllers and then disables it by
default.

Users of these controllers will now need to enable `SDSUPPORT` in their
configurations as others currently do.
9 years ago
Eric Kuzmenko b23d765991 Added Extrude From Multiple Extruders from LCD feature 9 years ago
Christian Lefrançois 8347a9d6e4 Fix HOMING_BUMP_DIVISOR for deltas configuration
* Re-bump speed divisor should be the same for delta printer.
9 years ago
Scott Lahteine 703df2cb6c Fix error message for probe region sanity check 9 years ago
Shane Francis 4c8330c15c Trim Adjustments for Delta Configurations 9 years ago
Scott Lahteine 962120d1d2 Fix spacing in some conditional blocks 9 years ago
Richard Wackerbarth 20b4772155 Create DEBUG_LEVELING_FEATURE 9 years ago
Scott Lahteine 194f98ff95 Debug messages for homing and leveling 9 years ago
Richard Wackerbarth 6292d9e815 Rename ENABLE_AUTO_BED_LEVELING
With the introduction of the #if ENABLED(…)

reads better than
9 years ago
Richard Marko 91fd66ffba add Lulzbot TAZ4 example configuration (PR#104) 9 years ago
Wurstnase 7a275773ee remove colon in utf_mapper.h (PR#106) 9 years ago
Chris Bruner 6b4b6fa315 update for newest version of U8glib_Arduino 9 years ago
Christian Lefrançois 9897a9147c Update ABL comments (PR#95)
* Updates the auto bed leveling comments ONLY.
* Renames "Z probe" word usage in //comments and #errors properly.
9 years ago
Christian Lefrançois a7822e3ff7 Some renaming of Z_PROBE to Z_MIN_PROBE (PR#91)
* Fix a couple of renames omission and macro expansion errors.
9 years ago
Richard Wackerbarth ad90e851b3 Use a small unsigned integer type 9 years ago
Richard Wackerbarth 29b456ae07 Suppress some compiler warnings 9 years ago
Scott Lahteine 23d742bf06 Don't free the stack array plane_equation_coefficients (PR#83) 9 years ago
Scott Lahteine e3b1e08777 Patch G30 to use raise_z_for_servo (PR#73) 9 years ago
Scott Lahteine a1eb90d5c0 Save another 30 bytes in gcode_SET_Z_PROBE_OFFSET 10 years ago
Scott Lahteine 91122277f4 Reduce gcode_SET_Z_PROBE_OFFSET by 88 bytes 10 years ago
AnHardt 5707a2c3d5 indexindexIntoAB is only vald for !DELTA 10 years ago
AnHardt d8860f9ad9 Alway end at the same point
Always end at [RIGHT_PROBE_BED_POSITION, BACK_PROBE_BED_POSITION]
Regardles the evennes of auto_bed_leveling_grid_points.
10 years ago
AnHardt 4ca8f4a9a7 Always zigzag
Use the shortest way between probing-points.
10 years ago
AnHardt 3d23424121 Add array indexIntoAB[xx][yy]
and use it.
10 years ago
AnHardt e2d69f66b2 Make Z_PROBE a Z_MIN_PROBE (PR#65)
Currently we use the probe exclusively as a device to find the build platform(bed).
For the currently supported setups this means, we use it as a additional min-endstop.
A triggered when not deployed probe disturbs the homing process for max-endstops.

Rename ENDSTOPPULLUP_ZPROBE to ENDSTOPPULLUP_ZMIN_PROBE
Rename Z_PROBE_ENDSTOP_INVERTING to Z_MIN_PROBE_ENDSTOP_INVERTING
Rename Z_PROBE_ENDSTOP to Z_MIN_PROBE_ENDSTOP
Rename DISABLE_Z_PROBE_ENDSTOP to DISABLE_Z_MIN_PROBE_ENDSTOP
Rename Z_PROBE_REPEATABILITY_TEST to Z_MIN_PROBE_REPEATABILITY_TEST
Rename Z_PROBE_ENDSTOP to Z_MIN_PROBE_ENDSTOP
Adjust comments accordingly
Remove Z_MAX  check for the probe in update_endstops().

Using an delta related idea of @clefranc from #61,
extended to the general change for all setups.

Tested with Prusa i3, max-z-endstop and permanently triggered z-probe.
Worked for @clefranc's delta.
10 years ago
AnHardt 6a6e863a47 Resolve #2581 by adding a missed ';' (PR#67) 10 years ago
RicardoGA e09ff79635 Update pins_RAMPS_13.h (PR#64)
Now all ramps configuration can enable Filament sensor not only EEB
10 years ago
Fourmi e6aed7bb4e Update thermistortables for Hisens Thermistor (PR#2588) 10 years ago
Richard Wackerbarth 9d8cc24abf Continue from the line following the M999 (PR#60)
If the printer is going to accept the M999,
then it should continue from that line number.
10 years ago
wurstnase f3ab1dba54 Z babystepping for coreXY (PR#47)
only X and Y were not implemented
10 years ago
Richard Wackerbarth 35afea1c0e Restore test
PR#2572 Changed this because of faulty Boolean Logic

NOT(A OR (NOT B) OR (NOT C)) !=

(NOT A) AND ((NOT B) OR C))


Besides, the compiler should be smart enough to
optimize this without help from the programmer
10 years ago
Scott Lahteine 6af75f4b5d Squish down deprecated tests in sanity check 10 years ago
Scott Lahteine edeb58288e Use PIN_EXISTS in sanity check 10 years ago
Scott Lahteine c30b7693e0 Clean up RUMBA pins conditions 10 years ago
Scott Lahteine 46453905d6 Apply remaining ENABLED/DISABLED conditionals 10 years ago
Richard Wackerbarth b227d8c128 Supply a VERSION in a short form for displays
The long descriptor will still be available in M115
10 years ago
Richard Wackerbarth cd7828a928 This will be the 1.1.0 Release rather than 1.0.3 10 years ago
Richard Wackerbarth 4e2f5618c1 Pick up Default_version when needed 10 years ago
Richard Wackerbarth 329acc852e Canonize Option flag USE_AUTOMATIC_VERSION 10 years ago
Richard Wackerbarth 5a11d32a85 Move deprecation test to SanityCheck.h 10 years ago
Richard Wackerbarth 7bb7a52940 Bring config up-to-date 10 years ago
AnHardt 244ea2014a Boot-screen for text-displays improvements
Centred the logo for 16x4 and 20 x4.
Moved version to the bottom line
Code shrink to 704 bytes.
10 years ago
AnHardt 80f2a20842 Enable bootscreen in all Configurations 10 years ago
AnHardt 2684d061ed Scroll too long strings on bootscreen 10 years ago
AnHardt 4f46df5dab Make bootscreen configurable for the graphic displays
Saves about 473 byte of progmem and 28 bytes of RAM.
10 years ago
AnHardt 09571b7753 Boot-screen for the character displays
Uses about 488 byte of progmem and 32 byte of RAM.
For that configurable.
10 years ago
Richard Wackerbarth 866efc14fe Add Danish translations 10 years ago
Scott Lahteine 267f3479d7 Adjust spacing in pins_RAMPS_13.h 10 years ago
Scott Lahteine 56702e7bb9 Define servo pins just like other pins 10 years ago
Richard Wackerbarth 4b9d5cd352 Use lowercase names for serial instances 10 years ago
Scott Lahteine 1e2deff4fd Rename BTENABLED to BLUETOOTH
- For some reason it’s easy to forget what BT stands for, but it
doesn’t need an abbreviation.
10 years ago
Scott Lahteine 68055a5959 Include RIGIDBOT_PANEL in Conditionals 10 years ago
George Djabarov f8ed3a835d Added comment with the RigidBot Big bed size 10 years ago
George Djabarov 7deae6b6be Updated RigidBot example configuration
- The default serial baud rate of 115200
- The regular RigitBot bed size 254mm/248mm/254mm
- Single stock extruder
- Stock termistors for extruder and hotbed
- Stock Min X/Y/Z stops. Max stops not connected
- Stock 32 teth tooleys (stock axis steps)
- No auto bed leveling
- No screen
10 years ago
Scott Lahteine 5418faa1f9 Add sanity checks for old names 10 years ago
Scott Lahteine f03e063750 Rename BEEPER to BEEPER_PIN
For consistency with other pins, allowing use of `PIN_EXISTS` macro.
10 years ago
Scott Lahteine 270c766de2 SDCARDDETECT -> SD_DETECT, added docs
- `SD_DETECT_PIN` replaces `SDCARDDETECT`
- `SD_DETECT_INVERTED` replaces `SDCARDDETECTINVERTED`
- Revise the description of `SD_DETECT_INVERTED`
- Add a note about the override of `SD_DETECT_INVERTED` in
`Conditionals.h`
10 years ago
Scott Lahteine 496fc28dc3 Tweaks to pins comments 10 years ago
Scott Lahteine 8d3b74cc6e Rename SDCARDDETECT to SDCARDDETECT_PIN
- Rename the pin so it can be tested with `PIN_EXISTS`
- Fix some incorrect tests for `SDCARDDETECT`
10 years ago
Scott Lahteine 0f5ada8cbd Group the fail case in one negation (PR#2572) 10 years ago
AnHardt 7ddf1cda1d Improve condition for SERVO_LEVELING (PR#2570) 10 years ago
Richard Wackerbarth f32048b8f5 In for a penny, in for a pound 10 years ago
Scott Lahteine e944f960de Add a sanity check for old name "BEEPER" 10 years ago
Scott Lahteine 8ebf0b92be Spacing adjustments in some pins files 10 years ago
Scott Lahteine 94a796c8cc Rename BEEPER to BEEPER_PIN
For consistency with other pins, allowing use of `PIN_EXISTS` macro.
10 years ago
Richard Wackerbarth b217474eab Compiler Complaints about concatenated tokens (PR#2566) 10 years ago
Scott Lahteine 2460f82d8b Make proper distinction between BEEPER and HAS_BUZZER 10 years ago
Scott Lahteine 58cfcd4239 Overridable Options - Part 5
Apply `ENABLED` / `DISABLED` macros to files needing only a small
number of changes.
10 years ago
Scott Lahteine 5e834352a9 Overridable Options - Part 11 (PR#2563)
Apply `ENABLED` / `DISABLED` macros to EEPROM-related files.
10 years ago
Scott Lahteine bf6eb93c61 Overridable Options - Part 10 (PR#2562)
Apply `ENABLED` / `DISABLED` macros to planner files.
10 years ago
Scott Lahteine 51e89a269c Overridable Options - Part 9 (PR#2561)
Apply `ENABLED` / `DISABLED` macros to temperature-related files.
10 years ago
Scott Lahteine c35fb88094 Overridable Options - Part 8 (PR#2560)
Apply `ENABLED` / `DISABLED` macros to stepper-related files.
10 years ago
Scott Lahteine 0d8989fc14 Overridable Options - Part 7 (PR#2559)
Apply `ENABLED` / `DISABLED` macros to LCD-related files.
10 years ago
Scott Lahteine b4abb0ae7f Apply ENABLED / DISABLED to Marlin core files (PR#2558) 10 years ago
Scott Lahteine c0d7ea3e7e Overridable Options - Part 4 (PR#2556)
Apply `ENABLED` / `DISABLED` / `HAS_SERVOS` macros to pins files.
10 years ago
Scott Lahteine 4b40964064 Overridable Options - Part 3 (PR#2555)
Apply `ENABLED` / `DISABLED` macros to language-related files.
10 years ago
Scott Lahteine 32683b282b Include configurator copies of configs 10 years ago
Scott Lahteine 37d1879386 Apply overridables to Configuration files 10 years ago
Scott Lahteine 9d151bb61b servo_endstop_angles -> servo_endstop_angle 10 years ago
Scott Lahteine 9334479aeb Minor cleanup of Conditionals.h 10 years ago
Scott Lahteine 1f63293624 servo_endstops -> servo_endstop_id 10 years ago
Scott Lahteine edaaead7e0 Fix comment about SERVO_ENDSTOP_ANGLES 10 years ago
Scott Lahteine ed4a6371ad Add HAS_SERVO_ENDSTOPS to simplify conditonals 10 years ago
Scott Lahteine 70be61d416 Reset filament_size with a loop 10 years ago
Scott Lahteine ae9274be05 Fix minor compiler warnings in for loops 10 years ago
Scott Lahteine c7c8cfed6f Complete M200 output with M503
- The contents of EEPROM include filament diameters even with
Volumetric disabled. This change makes `M503` display the full
volumetric settings so that playing back the output of `M503 S0` will
fully restore them.
10 years ago
Scott Lahteine 4a58e447a1 Add array size to servo_endstop_angles (PR#2553) 10 years ago
Andrew Lenharth a0ae9e30df don't pass integer by reference, inefficient. (PR#2547) 10 years ago
AnHardt d03f037a92 Get rid of malloc() and free() (PR#2549)
Just the minimal changes to qr_solve.cpp and .h to get rid of malloc() and free().

Saves about 656 bytes of progmem (library-code)
and 22 bytes for static variables.

Should use exactly the same amount of stack as it did before on the heap.
10 years ago
Scott Lahteine 3b2b2313ff Combine if block related to SERVO_ENDSTOPS 10 years ago
Scott Lahteine 0af2a80e06 Make SERVO_ENDSTOP_ANGLES 2-dimensional 10 years ago
Richard Wackerbarth 525d0dc239 Configurator is out-of-date AGAIN (PR#2550) 10 years ago
Richard Marko dd22cbbfb8 makefile: add buzzer.cpp (PR#2479) 10 years ago
Scott Lahteine 9f48798ffd Replace ENABLED with DEFINED for SERVO_ENDSTOPS (PR#2542) 10 years ago
Richard Wackerbarth ae00fad75b Rename as M100 10 years ago
Richard Wackerbarth a401d738df There is an echo in here 10 years ago
Richard Wackerbarth ed7d45e8f5 Memory watcher 10 years ago
AnHardt d17f7ebc8a Multiply WATCH_TEMP_PERIOD by 1000UL (PR#2535)
instead of 1000.  Else we get errors with times over 32 seconds.
10 years ago
Scott Lahteine bea6739774 Don't include Z_RAISE_AFTER_PROBING if not used (PR#2527) 10 years ago