99f983d066
Update Polish language ( #15541 )
5 years ago
0074d63962
Vendor version override ( #14189 )
...
Co-Authored-By: InsanityAutomation <insanityautomation@users.noreply.github.com>
5 years ago
7622973a31
Fix elapsed time overflow warning
5 years ago
d57a668097
Update Spanish Translation ( #15556 )
5 years ago
437978d349
Bring SPI_SENSORLESS code up to date ( #15560 )
5 years ago
a988f9304d
reduce the required size with uint16_t modifiers
5 years ago
21867c7fef
elapsed time overflow warning fix
...
tried to fix it with snprintf in libs/duration_t.h but its worst... :/
5 years ago
d37bd33c31
Update Spanish Translation
5 years ago
b4f82d1081
Update Slovak language ( #15527 )
5 years ago
f06602ff7e
Fix MKS Robin python script (for Travis CI) ( #15523 )
5 years ago
ee20f21a24
Fix undefined max in multi-language ( #15521 )
5 years ago
7714152013
Update Italian language ( #15533 )
5 years ago
5ad9257df4
Fix DUE HAL serial defines ( #15536 )
5 years ago
62aa137548
Fixed pid_autotune_menu made pid_label accessible ( #15551 )
5 years ago
37550e9d98
Allow 3-digit LCD Display of value
...
The LCD Display shows 3 digits of precision, not 4.
So change the bounding value to something more rational.
5 years ago
05eed72b69
Allow LCD Menu to adjust Junction Deviation lower
...
Allow LCD Menu to adjust Junction Deviation lower than .01. Some machines currently have a JUNCTION_DEVIATION_MM value as low as .005 mm. In the case of non-Linear-Advance machines... The upper limit is raised to .5 mm.
Probably more thought needs to be given to the Linear Advance case. It maybe it doesn't need a special case and should just use the same bounds as the non-Linear Advance case.
5 years ago
df09532a9c
Reassign FIL_RUNOUT_PIN for ReARM boards ( #15519 )
...
Reassign FIL_RUNOUT_PIN from P1_18 to P1_19
P1_18 is connected to a buffer in order to output 5V making it unsuitable for input.
5 years ago
59378db7de
Eliminate clutter in Formbot T-Rex 3 Configuration.h file
...
The extra clutter was making the Junction Deviation patch script calculate the wrong value.
(The script wasn't smart enough to see the extra lines were commented out and used the wrong values in the calculation.)
All fixed now with a JUNCTION_DEVIATION_MM calculated at .017
5 years ago
c8e348731f
Correct Junction Deviation value for Formbot Raptors
...
Re-apply the formula .4 * V^2 / Default_Acceleration to work correctly in Raptor configuration.h file.
(The problem is there are multiple XJerk and YJerk values declared based on the step sticks used on the printer.)
This change should provide correct values for all setups.
5 years ago
7a1fa2177c
Eliminate multiple DEFAULT_ACCELERATION declarations.
...
Re-calculate and fix the Junction Deviation value using correct DEFAULT_ACCELERATION number.
5 years ago
1df90aaf0e
Followup to num2str update ( #15518 )
5 years ago
ac8083588b
Add config for Wanhao Duplicator i3 v2.1
5 years ago
e79666a82b
Followup to "Fix G2/G3 rounding" ( #15510 )
5 years ago
b20d5a7cc6
Estimate Remaining Time (graphical display) ( #15497 )
5 years ago
5641adb01b
Clean up stray tabs
5 years ago
d8aeeb8ff6
Fix G2/G3 rounding error ( #15507 )
5 years ago
2cf35267c4
Set Junction Deviation value from Jerk and Default Acceleration ( #15509 )
...
Formula: `0.4 * sq(min(xjerk, yjerk)) / (default accel)`
5 years ago
6f60838736
Fix PAUSE_MODE_CHANGE_FILAMENT menu item ( #15501 )
5 years ago
ac466ecf74
Change Junction Deviation to Classic Jerk ( #15505 )
5 years ago
3664beec29
Don't refresh on status line changes
5 years ago
13cf417a98
[cron] Bump distribution date
5 years ago
541a9f2b85
Defer test of Lulzbot UI for now
5 years ago
b119c14017
Clean up LCD print, align ( #15498 )
5 years ago
46763efb75
Fix tool-change move with hotend offset ( #15491 )
5 years ago
6a865a6146
Multi-language support ( #15453 )
5 years ago
dc14d4a13c
Improvements and fixes to Lulzbot UI ( #15490 )
5 years ago
e6055dce76
Followup to position refactor
5 years ago
b4d48fdc91
Followup to #15481
5 years ago
af80653f3f
Always report all PIDs in M503
...
Fix #14474
5 years ago
a525cc06c1
Add ARC_SUPPORT to DUE tests
5 years ago
914605c89c
gcc is forgiving of stray ;
5 years ago
89490171ef
Use "concatenatable" language codes
5 years ago
c0005e939c
Enable junction deviation by default ( #15481 )
5 years ago
1df6c7a46c
Work around a compiler bug
...
See #15478
5 years ago
5becda25c5
Followup to E renumbering
5 years ago
cb1cb72c76
Fix Move Z menu item
5 years ago
e34aa1ff8f
Add A8, A8 Plus, A6 logos to configs ( #15489 )
...
Co-Authored-By: Leo <leo@nutz.de>
5 years ago
58f81f8e7e
Followup to progress override ( #15488 )
5 years ago
d45ab47139
[cron] Bump distribution date
5 years ago
9dcccc11ba
Fix extra condition
5 years ago
Slawomir Ciunczyk