Clean up stray tabs

Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_BULK_STORAGE/UHS_SCSI.h

@@ -25,7 +25,7 @@ e-mail   :  support@circuitsathome.com
  */
 
 #ifndef UHS_SCSI_H
-#define	UHS_SCSI_H
+#define UHS_SCSI_H
 
 /*
  * Reference documents from T10 (http://www.t10.org)
@@ -35,21 +35,21 @@ e-mail   :  support@circuitsathome.com
  */
 
 /* Group 1 commands (CDB's here are should all be 6-bytes) */
-#define SCSI_CMD_TEST_UNIT_READY	0x00U
-#define SCSI_CMD_REQUEST_SENSE		0x03U
-#define SCSI_CMD_FORMAT_UNIT		0x04U
-#define SCSI_CMD_READ_6			0x08U
-#define SCSI_CMD_WRITE_6		0x0AU
-#define SCSI_CMD_INQUIRY		0x12U
+#define SCSI_CMD_TEST_UNIT_READY        0x00U
+#define SCSI_CMD_REQUEST_SENSE          0x03U
+#define SCSI_CMD_FORMAT_UNIT            0x04U
+#define SCSI_CMD_READ_6                 0x08U
+#define SCSI_CMD_WRITE_6                0x0AU
+#define SCSI_CMD_INQUIRY                0x12U
 #define SCSI_CMD_MODE_SELECT_6          0x15U
-#define SCSI_CMD_MODE_SENSE_6		0x1AU
-#define SCSI_CMD_START_STOP_UNIT	0x1BU
+#define SCSI_CMD_MODE_SENSE_6           0x1AU
+#define SCSI_CMD_START_STOP_UNIT        0x1BU
 #define SCSI_CMD_PREVENT_REMOVAL        0x1EU
 /* Group 2 Commands (CDB's here are 10-bytes) */
 #define SCSI_CMD_READ_FORMAT_CAPACITIES 0x23U
-#define SCSI_CMD_READ_CAPACITY_10	0x25U
-#define SCSI_CMD_READ_10		0x28U
-#define SCSI_CMD_WRITE_10		0x2AU
+#define SCSI_CMD_READ_CAPACITY_10       0x25U
+#define SCSI_CMD_READ_10                0x28U
+#define SCSI_CMD_WRITE_10               0x2AU
 #define SCSI_CMD_SEEK_10                0x2BU
 #define SCSI_CMD_ERASE_10               0x2CU
 #define SCSI_CMD_WRITE_AND_VERIFY_10    0x2EU
@@ -107,10 +107,10 @@ e-mail   :  support@circuitsathome.com
 #define SCSI_CMD_READ_ALL_SUBCODES      0xDFU /* Vendor unique */
 
 /* SCSI error codes */
-#define SCSI_S_NOT_READY		0x02U
-#define SCSI_S_MEDIUM_ERROR		0x03U
-#define SCSI_S_ILLEGAL_REQUEST		0x05U
-#define SCSI_S_UNIT_ATTENTION		0x06U
+#define SCSI_S_NOT_READY                0x02U
+#define SCSI_S_MEDIUM_ERROR             0x03U
+#define SCSI_S_ILLEGAL_REQUEST          0x05U
+#define SCSI_S_UNIT_ATTENTION           0x06U
 #define SCSI_ASC_LBA_OUT_OF_RANGE       0x21U
 #define SCSI_ASC_MEDIA_CHANGED          0x28U
 #define SCSI_ASC_MEDIUM_NOT_PRESENT     0x3AU
@@ -324,4 +324,4 @@ struct SCSI_Request_Sense_Response {
         uint8_t SenseKeySpecific[3];
 } __attribute__((packed));
 
-#endif	/* UHS_SCSI_H */
+#endif  /* UHS_SCSI_H */

Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_printf_HELPER.h

@@ -25,7 +25,7 @@ e-mail   :  support@circuitsathome.com
  */
 
 #ifndef UHS_PRINTF_HELPER_H
-#define	UHS_PRINTF_HELPER_H
+#define UHS_PRINTF_HELPER_H
 
 #ifdef LOAD_UHS_PRINTF_HELPER
 #include <Arduino.h>
@@ -197,4 +197,4 @@ void UHS_AVR_printf_HELPER_init() {
 #ifndef UHS_printf_HELPER_init
 #define UHS_printf_HELPER_init() (void(0))
 #endif
-#endif	/* UHS_PRINTF_HELPER_H */
+#endif  /* UHS_PRINTF_HELPER_H */

Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/macro_logic.h

@@ -10,7 +10,7 @@
  */
 
 #ifndef MACRO_LOGIC_H
-#define	MACRO_LOGIC_H
+#define MACRO_LOGIC_H
 
 #define AJK_CAT(a, ...) AJK_PRIMITIVE_CAT(a, __VA_ARGS__)
 #define AJK_PRIMITIVE_CAT(a, ...) a ## __VA_ARGS__
@@ -150,4 +150,4 @@ Make 3 bogus function bodies
 AJK_MAKE_FUNS(unsigned Cfunc,(arg1, arg2),3,BODY)
 #endif
 
-#endif	/* MACRO_LOGIC_H */
+#endif  /* MACRO_LOGIC_H */

Marlin/src/sd/usb_flashdrive/lib-uhs3/dyn_SWI/SWI_INLINE.h

@@ -23,7 +23,7 @@
  */
 #ifdef DYN_SWI_H
 #ifndef SWI_INLINE_H
-#define	SWI_INLINE_H
+#define SWI_INLINE_H
 
 #ifndef SWI_MAXIMUM_ALLOWED
 #define SWI_MAXIMUM_ALLOWED 4
@@ -240,7 +240,7 @@ int exec_SWI(const dyn_SWI* klass) {
 }
 
 #endif /* defined(__arm__) */
-#endif	/* SWI_INLINE_H */
+#endif  /* SWI_INLINE_H */
 #else
 #error "Never include SWI_INLINE.h directly, include dyn_SWI.h instead"
 #endif

Marlin/src/sd/usb_flashdrive/lib-uhs3/dyn_SWI/dyn_SWI.h

@@ -20,7 +20,7 @@
  */
 
 #ifndef DYN_SWI_H
-#define	DYN_SWI_H
+#define DYN_SWI_H
 
 
 #if defined(__arm__) || defined(ARDUINO_ARCH_PIC32)
@@ -109,10 +109,10 @@ extern "C"
 #elif defined(CORE_TEENSY)
 
 #ifndef NVIC_GET_ACTIVE
-#define NVIC_GET_ACTIVE(n)	(*((volatile uint32_t *)0xE000E300 + ((n) >> 5)) & (1 << ((n) & 31)))
+#define NVIC_GET_ACTIVE(n)  (*((volatile uint32_t *)0xE000E300 + ((n) >> 5)) & (1 << ((n) & 31)))
 #endif
 #ifndef NVIC_GET_PENDING
-#define NVIC_GET_PENDING(n)	(*((volatile uint32_t *)0xE000E200 + ((n) >> 5)) & (1 << ((n) & 31)))
+#define NVIC_GET_PENDING(n) (*((volatile uint32_t *)0xE000E200 + ((n) >> 5)) & (1 << ((n) & 31)))
 #ifndef SWI_IRQ_NUM
 #ifdef __MK20DX256__
 #define SWI_IRQ_NUM 17
@@ -169,4 +169,4 @@ extern int exec_SWI(const dyn_SWI* klass);
 #define DDSB() (void(0))
 #endif
 #endif
-#endif	/* DYN_SWI_H */
+#endif  /* DYN_SWI_H */