9790 Commits (8f4c6e6d1a271cc0d1d310243941f4b6ce1cc863)

Author SHA1 Message Date
Giuliano Zaro 8f4c6e6d1a Fix case light on boot (#12919) 6 years ago
Marcio Teixeira f11c6d5d02 Fix M107 when dual-nozzles share fan (#12819) (#12909) 6 years ago
Karl Andersson 64a4649290 STM32 - Fix SD write (#12897) 6 years ago
Ludy 294521439e Clean up Configuration_adv.h (#12900) 6 years ago
InsanityAutomation 59b18aaeef Allow resume from pause with parking enabled (#12893)
Currently, Pause of an SD-Memory card print does not work.    This has been verified to resolve the issue by multiple people.   

I understand more work needs to be done to resolve some of the concerns...
6 years ago
Giuliano Zaro 85f149befe Save some progmem (#12913) 6 years ago
mikeshub 7fde8d9d1e Add CreatorPro / Makerbot / QIDI / etc and Mightboard RevE support (#12855)
- Fix a bug in MAXxxxx thermocouple temp reporting.
- Add support for 3-wire HD44780.
- Add support for PCA9533 RGB driver.
- Add configuration examples for FlashForge CreatorPro.
6 years ago
Scott Lahteine 3644c940bf Tweak SD section of Main Menu 6 years ago
teemuatlut 1a79878dff Remove TMC_Z_CALIBRATION in favor of Z_STEPPER_AUTO_ALIGN 6 years ago
Scott Lahteine 7cfce20cd3 Update comments on M125 6 years ago
Jason dc4786a504 Config files for PowerWASP Printer (#12889) 6 years ago
Scott Lahteine 3e867008f0 Fix some HAL_STM32F1 type declarations 6 years ago
Scott Lahteine eb78aed863
Rename LCD menus according to variable types (#12892) 6 years ago
InsanityAutomation ed3ab5e212 Fix M24 not starting new job (#12887) 6 years ago
Nils Hasenbanck f9299c4461 Make timer definition in pin files for STM32 possible (#12874)
RemRam needs to redefine a particular timer to work correctly. The HAL did foresee this possibility and checks if the timer was already defined for either the stepper or temperature timer.

Prior to this commit the header file for the timers couldn't see those definitions in the pin file, but this commit will fix this.

Tested on an actual hardware to verify. (It wouldn't boot without it.)
6 years ago
InsanityAutomation 082f6a27de ADAPTIVE_FAN_SLOWING extension to hotend thermal protection (#12853) 6 years ago
Scott Lahteine 459f4fef60 Fix Temperature::init bug with HEATER_4_PIN 6 years ago
InsanityAutomation a403d9a50c Improve menu pause / resume (#12876) 6 years ago
Alain Martel 432c21456f Add 3DFabXYZ Migbot example config (#12775)
Co-Authored-By: Alain Martel <alain74martel@gmail.com>
6 years ago
Scott Lahteine fb8111553e getStatus => report_status 6 years ago
Chris Pepper 2919f3045d [LPC176x] Update PIO extrascript (#12878) 6 years ago
Scott Lahteine 19fea772e5 Use E_AXIS_N where it makes sense 6 years ago
Scott Lahteine 0d30ccf767 Tweaks to TMC26XStepper 6 years ago
HackingGulliver 1fd8e2c649 Fix: Junction Deviation calculates wrong cos(theta) on CoreXY (#12879) 6 years ago
Scott Lahteine b402040059 Split bed size sanity check into two 6 years ago
Chris Barr 1d33784bf9 Add RUMBA32 Board (#12856) 6 years ago
Ondřej Nový a0ef6198ff Level bed corners Z-hop height option (#12858) 6 years ago
Karl Andersson 8ae6f1e556 Fix errors and some compiler warnings with HAL_STM32 PlatformIO build (#12869) 6 years ago
Scott Lahteine e6484d9dab Return to status when SD card is removed 6 years ago
Scott Lahteine 5f2d75f45b Move PINS_DEBUGGING to @section develop 6 years ago
Scott Lahteine da42f27c9e Use maths macros for ceil/floor 6 years ago
Ludy de4561c980 VORON Add LCD option BEEP_ON_FEEDRATE_CHANGE (#12822) 6 years ago
Giuliano Zaro 709a6356f7 Remove obsolete test conditions (#12829) 6 years ago
Luu Lac bcf347403b Fix M106 extruder & fan count (#12820) 6 years ago
Kaushik Vemparala ba7e35cbab Add LCD option BEEP_ON_FEEDRATE_CHANGE (#12774) 6 years ago
jmz52 d372e7e477 SDIO support for STM32F1 (#12782) 6 years ago
Marcio Teixeira 6a8fb0f25f Simplify backlash compensation code. (#12813)
- Use `TEST(dm,axis)` to determine directions instead of doing comparisons.
- Remove recomputation of `millimeters` and `delta_mm` since backlash compensation should not affect the distance over which material is extruded.
6 years ago
luxflow 7f244f9b9c Update LPC SD pins for BIQU SKR (#12767)
(Exactly matching the Azteeg X5 MINI Wifi)
6 years ago
jmz52 813a4ea107 Add support for Mks Robin TFT display (#12706)
* Add support for MKS Robin TFT display

- Add support for MKS Robin TFT display and encoder for MKS Robin board.
- Generic 128x64 UI with x2 upscale is used (for now).
- Tested on MKS Robin TFT V2.0 with ST7789V controller.
6 years ago
jmz52 c4237b529f Fix MKS Mini and SD card conflct over SPI mode (#12783) 6 years ago
Phr3d13 01f75591c6 Fix GTM32_PRO_VB Serial and HAL via watchdog (#12753)
Move `watchdog_reset` from `.h` to `.cpp` to eliminate the need to include `MarlinConfig.h` in a HAL-related file.
6 years ago
Scott Lahteine 288340cb6c Followup to VORON 6 years ago
Scott Lahteine 2aaa681dea Remove unused Cheaptronic pins 6 years ago
Marcio Teixeira 81e753064a Fix ExtUI compile warnings and error (#12799) 6 years ago
Ludy 74c47803f7 Add VORON printer (#12705) 6 years ago
kAdonis 637fb20c75 Allow 4 fan animation frames (#12772) 6 years ago
petieken d9cf5e4883 Update pins_BIQU_SKR_V1.1.h (#12758) 6 years ago
TheLongAndOnly cb643d87df Adding missing code for triple Z-stepper auto-align (#12786) 6 years ago
Ludy 14a7faf087 Fix compile warning comparison uint and int (#12788) 6 years ago
Marcio Teixeira 60cb36bef3 Misc. improvements (#12747)
* Make ExtUI respect MAXTEMP limits
  - Temperatures are now clamped by MAXTEMP limits rather than arbitrary values.
* Speed up USB init, add status
  - Speed up USB initialization
  - Show status message if init failed
* Enable status messages for EXTENSIBLE_UI
* Adjust max limit to MAX_TEMP - 15
* Misc. tweaks to formatting, const, etc.
6 years ago