6098efcc59
Use float62 for LCD edit of Z Fade
7 years ago
1cb810ff1c
[2.0.x] Automatically reset stepper timeout ( #10179 )
...
* Automatically reset stepper timeout in manage_inactivity
Any code that adds moves to the planner can skip resetting the stepper timeout. We can let `idle` / `manage_inactivity` reset the timer whenever it detects any moves in the planner.
* blocks_queued => has_blocks_queued
7 years ago
fbdc5ad962
Prevent lcd_update stack overflow on SD Card change
7 years ago
f1327fd5f9
Use lcd_goto_previous_menu_no_defer more
7 years ago
51ebdf3b7d
Finish scroll_screen with menu direction/multiplier
...
Fixes #10041
7 years ago
3c2bfa5e53
Update powersupply_on in power_on/off ( #10015 )
...
Fix #10004
7 years ago
1913c37a91
Tweak to manual move eindex arg
7 years ago
03e3011332
Fix compile error with MAX_MESSAGE_LENGTH
...
Fix #9988
7 years ago
be0e100fed
Fix sd subdirectory encoder position
...
Followup to 7e386c7
7 years ago
0149680f54
Fix compile error with char LCD
7 years ago
7e386c7e98
Fix encoder position for sddirectory
7 years ago
22a017a856
Rebuild SD file sort array on Stop SD Print ( #9976 )
...
Thanks Chuck Hellebuyck.
7 years ago
f9cafc4001
Fix menu highlight glitch, tweak scrolling code ( #9957 )
7 years ago
2d1233b86c
Fix lcd_quick_feedback call for BTN_BACK
7 years ago
8bffb26c23
Fix manual move position display
...
Manual moves now correctly include the workspace offset.
7 years ago
35ec67885a
Add support for BACK button (RADDS) ( #9835 )
7 years ago
eb079959fb
Report sd card progress [FR] #9751 ( #9832 )
...
* SD Status auto-report feature
Feature Request #9751
7 years ago
43ff15244d
Fix a progress bar condition
7 years ago
2bd252b501
[2.0.x] LIN_ADVANCE v1.5 ( #9712 )
7 years ago
9c9cd54ef3
Add Z Fade Height edit to UBL and Tune submenus ( #9738 )
7 years ago
532bb3aaa1
Lightweight status screen for ST7920
...
- This status screen uses the ST7920 character generator to greatly
reduce SPI traffic and MCU load when updating the status screen.
- Has been tested with the RepRapDiscount Full Graphics Smart Controller
but should work with any LCD that uses an ST7920 or fully compatible
controller.
7 years ago
72f63a4980
Fix DOGM progress bar with LCD_SET_PROGRESS_MANUALLY
7 years ago
fc460fff94
Extend menu items for SWITCHING_EXTRUDER
...
Reference #5367
7 years ago
25e3e62354
Null-terminate lcd_status_message
7 years ago
cff62042ee
Fix LCD manual movement on kinematic machines ( #9655 )
7 years ago
93c0198b2d
Init LCD welcome message programmatically
7 years ago
e6b8207b03
Restore welcome message
7 years ago
299606e4ae
[2.0.x] Memory overflow protection ( #9562 )
7 years ago
5a70887467
Size lcd_status_message based on language ( #9545 )
7 years ago
e5ee0b6f6c
Implement MALYAN_LCD
7 years ago
2ea4e74ed3
Misc. comments
7 years ago
786746404b
[2.0.x] Apply feedrate to nozzle movement for kinematic machines ( #8778 )
7 years ago
79796b22ad
Fix up _Bootscreen.h and _Statusscreen.h
7 years ago
61bf8478a2
Add hotEnough methods
7 years ago
719cd53e09
Standardized max temp values
...
Everywhere in menu items temperatures are "defined value" subtracted by 15.
In one place is subtracted by 5
7 years ago
f5f1b069ad
Convert UBL mesh tilting to all use the same algorithm ( #9204 )
...
A number of regressions were patched also. The UBL G29 P2 and P4 Press and Hold had stopped working. It is very possible this is broken in the bugfix_v1.1.x branch also.
The main purpose of the Pull Request is to get the 3-Point mesh tilting to use the LSF algorithm just like the grid based mesh tilt. This simplifies the logic and reduces the code size some what. But the real reason to do it is the 3-Point case can be solved exactly. And by feeding these numbers into the LSF algorithm it provides a way to check all that code for 'correctness'.
7 years ago
e633ce06c7
LCD contrast type mismatch is back
...
WORKS!
7 years ago
f26805e862
[2.0.x] UBL Mesh Storage Message ( #9095 )
7 years ago
cb0e826c5d
Merge pull request #9068 from Bob-the-Kuhn/SD-detect
...
[2.0.x] SD card detect improvement
7 years ago
f72b0a7b04
1234
7 years ago
e89f1453ab
UBL G29 works without settings.load()
7 years ago
7541316bb4
Add M701/M702 Filament Load/Unload, M603
7 years ago
455592eee8
Improvements to LCD menu macros
7 years ago
e43f3ac989
EEPROM init fix
7 years ago
fc67c64b8f
Merge pull request #8989 from tcm0116/2.0.x_ubl
...
[2.0.x] Fix UBL compilation warnings
7 years ago
8afc4f8d9d
Fix UBL compilation warnings
7 years ago
e9fc7bc69c
Merge pull request #9000 from Bob-the-Kuhn/2.0-LCD-contrast
...
[2.0.x] lcd_contrast type mismatch work around
7 years ago
39e5fabfa9
Z BabyStepping should not be dependent on a bed leveling system being active
7 years ago
ef911a2d12
works
7 years ago
2929c9e56f
A specific option to SLIM_LCD_MENUS
7 years ago
615146c069
Enqueue commands better in ultralcd.cpp
7 years ago
9ecdd1f4c7
Multi extruder support for M600 and LCD
7 years ago
a1ce6e8ff4
Clear lcd_clicked immediately on use
7 years ago
f163eede78
No sub-menu if NO_VOLUMETRICS
...
For parity with #8911
7 years ago
4ef965cc40
Fix compiler warnings
7 years ago
4b49ea1e92
General cleanup of config-store, reset_bed_level
7 years ago
933f76fda3
Option to disable all volumetric extrusion
7 years ago
de5ca96654
More parity with 1.1.x, plus whitespace
7 years ago
9898b96992
No lcd_map_control flag in quick_stop
7 years ago
c846388a65
Standardize LCD interface code for UBL a little
7 years ago
2fde60da12
Changes for parity with 1.1.x
7 years ago
aeb5c623c1
Show "Level Bed Corners" with UBL too
...
Addressing #8676
7 years ago
e37dd64548
Apply LEDColor, language fixes
7 years ago
cf0f78336b
New Feature: LED_CONTROL_MENU
7 years ago
276271e72f
Make MBL work more like PROBE_MANUALLY
7 years ago
f90c075d1f
SD Menu patches
7 years ago
9b64be0bc5
Fixes for leveling sub-menus
7 years ago
5926c9c97b
Followup for MESH_EDIT_GFX_OVERLAY
7 years ago
c6b0c104bb
Adapt G26 to work for all meshes
7 years ago
9406c87a97
Fix up LCD init / charset
7 years ago
56c02b7f59
Shift register buttons question
...
Can LCD shift registers keep up with faster MCUs?
7 years ago
3994d3b935
General cosmetic LCD
7 years ago
6e533748eb
Fixes #8472
7 years ago
3bba7d60f3
No retroactive changes with M851 Z
...
If using babystep to adjust the Z probe offset, the axis will move and the mesh will be updated at the same time, causing a doubling of the Z offset over the rest of the print.
To correct for this, the current Z position would need to be modified in the opposite direction, canceling out the additional Z offset added to the mesh. This would be confusing to users, and moreover it would not be accurate without also taking the current Z fade level and current Z height into account.
It might make sense to change the mesh in the case where no babystepping is taking place, but this could be considered an undesirable side-effect of changing the `zprobe_zoffset`.
One way to remedy this would be to return to storing the mesh with `zprobe_zoffset` included, then subtracting `zprobe_zoffset` from the returned Z value. Thus, a babystep moving the Z axis up 1mm would subtract 1 from `zprobe_zoffset` while adding 1 to all mesh Z values.
Without including the `zprobe_zoffset` in the `z_values` there is no safe way to alter the mesh in conjunction with babystepping, although it's fine without it.
7 years ago
36426af564
Merge pull request #8356 from tcm0116/2.0.x-M600
...
[2.0.x] Normalize load/unload length in M600
7 years ago
e334efb2a7
PROBE_MANUALLY etc.
7 years ago
cba9c1cf9e
Add pre-calculated planner.e_factor
7 years ago
f34c3597dc
Add delta_height variable in lieu of using home_offset
7 years ago
82f45c3e6a
Patch G33 misuse of PROBE_MANUALLY
7 years ago
064e6fe60e
Remove debugging pin toggle from LCD code
7 years ago
0483a7df91
AVR RRD works
...
LPC1768 VIKI2 & RRDFG are working
looks like all SPIs are working
library change
sh1106 locks up
fixed lockup, started I2C SW com
pretty
re-org
restore a few files
make library happy
switched HAL version of rrd
fix travis error
travis error fixes
another travis fix
cleanup
minor update
one more
correct spacing in platformio.ini
7 years ago
ca7d36d9ed
RAMPS pins for ANET_KEYPAD_LCD
7 years ago
4df024d7b9
Merge pull request #8234 from thinkyhead/bf2_native_operation
...
[2.0.x] Operate in Native Machine Space
7 years ago
f8393a0908
Operate in Native Machine Space
7 years ago
ca0e4b4e96
Some cleanup around 'lcd_bootscreen()' and 'lcd_kill_screen()'
...
Move 'lcd_bootscreen()' from `lcd_init()` to 'setup()' where it is cexecute exactly once. Saves 'bool show_bootscreen'.
Move the call of 'lcd_custom_bootscreen()' to the begin of 'lcd_bootscreen()'.
Move the delays into the related functions.
Move the picture loop around 'lcd_kill_screen()' into the function.
7 years ago
e5ae545647
Remove ADCKey steps acceleration
7 years ago
03e5369411
Faster menu navigation for Anet A8
...
Addressing #8166
7 years ago
2cdde08339
Apply items specified in code review
...
Followup to #8122
7 years ago
b7a66742dd
tested
...
add sort alpha section to other LPC1768 boards
7 years ago
12458cefc4
Remove 5s timer hack. Encoder pos is saved on print start!
7 years ago
9a4cf11835
Remove return_to_status_ms hack, just use defer...
7 years ago
8949c8c0a5
Move SD_REPRINT_LAST_SELECTED_FILE to ultralcd.cpp
7 years ago
b338cafc65
Merge pull request #8111 from thinkyhead/bf2_fwretract_fix_oct26
...
[2.0.x] Improved Firmware Retraction logic
7 years ago
ada90f7335
Clean up trailing spaces
7 years ago
eb02f8c719
Improve FWRETRACT logic, add common sense
7 years ago
3f5f39576b
Reprint option for last SD Memory card file ( #8106 )
...
* Re-Print of same SD Memory Card file with single click
* Re-Print of same SD Memory Card file with single click
* This is the bugfix-v2.0.0 version of https://github.com/MarlinFirmware/Marlin/pull/8104
7 years ago
6296ab2173
Add GFX overlay to UBL mesh edit ( #8038 )
...
* Add GFX overlay to UBL mesh edit
Fixed misplaced HAS_TEMP_BED in dogm_bitmaps.h
rename _lcd_babystep_zoffset_overlay to _lcd_zoffset_overlay_gfx and move it out of BABYSTEP_ZPROBE_OFFSET to we can use it for over things. Add this function into UBL mesh edit screen.
update all Configuration.h to add ENABLE_MESH_EDIT_GFX_OVERLAY
* Add Sanity to UBL insanity
Need to check for DOGLCD otherwise error out.
7 years ago
72156a2029
change to better (more clear) names ( #8050 )
...
set_destination_to_current() changed to set_destination_from_current()
set_current_to_destination() changed to set_current_from_destination()
7 years ago
783ddf9691
Add SCROLL_LONG_FILENAMES option
7 years ago
ce48403a0b
Add EXTRA_FAN_SPEED feature
...
Based on #7883 by @studiodyne
7 years ago
5c4f3e0107
Add LCD_SET_PROGRESS_MANUALLY
7 years ago
b206f70693
Split the software endstop capability by axis.
7 years ago
8dd08425fd
Improve LCD leveling edits
7 years ago
3e3911fb81
Use planner.leveling_active for all leveling systems
7 years ago
9a930ebec2
Make leveling_is_active a macro
7 years ago
9b0ee53b12
Use segmented moves when moving axis from LCD
7 years ago
ca3c9baf1b
Fix DUAL_X_CARRIAGE manual moves, add T0/T1 menu item
7 years ago
a8b8d4e85e
Add a typedef for MENU_ITEM(function,…) functions
7 years ago
90af1fe5ee
Implement NO_MOTION_BEFORE_HOMING option
7 years ago
ac41eb5871
Merge pull request #7722 from tcm0116/2.0.x-warnings
...
Cleanup 2.0.x compiler warnings
7 years ago
ae2173cd52
Synchronize retractions
7 years ago
0cb00f52d9
Cleanup warnings
7 years ago
604b804125
Add confirmation step to Init EEPROM
7 years ago
c869dc9745
User script return-to-status option
7 years ago
ce1638e32f
Add Babystep Z graphic overlay
...
See PR #7593
7 years ago
92dbf5f148
Fix babystep edit label, allowing translation
7 years ago
7a29f802d0
Fix ENCODER_PULSES_PER_STEP for G3D_PANEL
7 years ago
6d5fcac54a
G33 changes from 1.1.x
7 years ago
71d63fcafb
Apply LCD changes from 1.1.x
...
Changes from #7720
7 years ago
bfd1e75c04
Patch for caselight + lcd compile issues
7 years ago
a10451ceed
Move Volumetric methods to Planner
7 years ago
4f1eadf41f
FILAMENT_WIDTH_SENSOR feature
7 years ago
d5fe0fb02b
Consolidate PrintCounter
7 years ago
551752eac7
Consolidate "bedlevel" code
7 years ago
63228fc453
Move volumetric flag to GCodeParser
7 years ago
bf7af95db3
Move flow_percentage to Planner
7 years ago
a98e9874db
FWRETRACT as a feature
7 years ago
722786966a
Add gcode.cpp, motion.*, queue.* - Apply to some G-codes.
7 years ago
e0a189a481
Consolidate Buzzer
7 years ago
0fcec02db5
LCD updates
7 years ago
cc92e544a5
Move 'lcd' files
7 years ago
Scott Lahteine