7a6a1ef583
M666 normalize positive values to <=0
...
M666
+ tower radians absolute value
8 years ago
d8102aeca8
Cn negative : no tower angle calibration
...
Giving a negative number of probe points disables the tower angle
correction calibration ('4point' instead of '7point' solution)
EEPROM version updated
8 years ago
adb8e68592
Fix stuck "Print Aborted" LCD message
...
Fixes #6393
8 years ago
5bdb0b567d
Cosmetic patches
8 years ago
ccda63c473
Drop the accessor form for LCD value editing
8 years ago
13c8493878
M665 rework and related issues (all delta's)
...
- Making M665 compatible with repetier (see
http://reprap.org/wiki/G_code#M665:_Set_delta_configuration )
- M665 B also sets the radius for manual calibration menu
- Converting tower ajustment definitions to arrays - tower angle
corrections compatible with Esher 3D wizzard
- Only tower angles need to be adjustable with M665 and stored to EEPROM
- tower radius and diag rod can be adjusted in the FW only with #define
8 years ago
e0e069c6d8
Clean up trailing whitespace
8 years ago
1286d9603d
Clean up and organize ultralcd.cpp
8 years ago
3cdf78a79f
MSG_VOLUMETRIC => MSG_FILAMENT
8 years ago
f8e77d6545
Add Linear Advance values to EEPROM and enable configuration of K via LCD
8 years ago
a81606c680
Show Cancel/Continue screen for ABL "Level Bed"
8 years ago
4e04383d18
Merge pull request #6354 from thinkyhead/rc_doubleclick_fix
...
Fix undefined symbol if DOUBLECLICK_FOR_Z_BABYSTEPPING and HAS_BED_PROBE defined
8 years ago
8dd0492e68
Show lcd_babystep_zoffset screen if DOUBLECLICK_FOR_Z_BABYSTEPPING is enabled and HAS_BED_PROBE is defined
8 years ago
60471b7592
minor improvements
...
Configuration_store.cpp - changed a couple of print statements so the
values were printed. The old method resulted in the formula being
printed.
ubl_G29
1) added support for R option to P4. Now probes all points unless R is
present and the number is greater than 0.
2) P2 - moved map print statement so it showed the point that was
currently being probed, The old location did this only for the first
point.
3) P4 - Moved the map print for the same reason.
ultralcd.cpp - changed "Mesh Editor :" to "Mesh Editor" because the LCD
draw routine puts a ":" in automatically so you end up with an extra ":"
using the old message.
8 years ago
a2356c2825
Fix compiler warning about z-offset callback
8 years ago
cf6f483378
Merge pull request #6187 from thinkyhead/rc_flsun_delta_autocal
...
Delta: DELTA_HEIGHT, G33 Auto-Calibrate, drop M206/M428, add M665 H
8 years ago
24882adfbf
Allow NO_WORKSPACE_OFFSETS with DELTA_AUTO_CALIBRATION
...
- On `DELTA` the `M665 H` option supplants `M206`
- On `DELTA` `NO_WORKSPACE_OFFSETS` only reverts `G92` behavior
- Spawn 4 conditionals based on `NO_WORKSPACE_OFFSETS`
- Optimize coordinate space conversion for `DELTA` workspace
- To keep EEPROM version, retain `home_offset[XYZ]`, just ignore XY
8 years ago
8821963873
Implement delta auto-calibration and delta_height
8 years ago
1f9ee42750
Fix lcd_babystep_zoffset()
...
Resolve 'steps_to_mm was not declared in this scope' compilation error after recent changes to merge babystepping with M851
8 years ago
52c3ace102
Add BABYSTEP_ZPROBE_OFFSET as an optional feature
8 years ago
60ac41a32c
Add code to handle changes to zprobe_zoffset
8 years ago
361655828f
Use babystepping to adjust bed probe z-offset
8 years ago
001bc14255
Allow 10mm Movements for Z-Axis
...
I use the movement options via LCD quite often. Especially to get the nozzle out of the way. I see no reason, why the 10mm option is disabled for the Z-Axis, this is why i always delete this line when i compile a new version.
If this is unwanted, please just close this PR
8 years ago
48c16fc6ef
Merge pull request #6307 from thinkyhead/rc_less_no_reentrance
...
Only lcd_synchronize needs no_reentry
8 years ago
4fcfe926d6
Only lcd_synchronize needs no_reentry
8 years ago
67fb7f82ac
Merge pull request #6283 from thinkyhead/rc_eeprom_z_fade
...
Save / restore z_fade_height in EEPROM
8 years ago
3b82db5fe9
Missing semicolon in ultralcd.cpp
...
When PARK_HEAD_ON_PAUSE is defined Marlin won't compile because of two missing semicolon.
8 years ago
786af73e24
Convert config code to a static class
8 years ago
7a704af5e6
Merge pull request #6284 from thinkyhead/rc_wt150_rebase
...
wt150 (Mightyboard Rev E) & RRD Full Graphic Smart Controller
8 years ago
314a02e2d5
Toggle with XOR
8 years ago
9b0885f4f6
Allow boards without a thermistor
8 years ago
c54f6cf23d
Updates to support 5 extruders
8 years ago
f8408036f2
Merge pull request #6264 from thinkyhead/rc_five_extruders
...
Support up to 5 extruders in Marlin
8 years ago
832064e4f2
Implementation changes to support 5 extruders
8 years ago
dc84678fc1
Fix HOTEND_STATUS_ITEM for graphical display
8 years ago
6643d553f6
# This is a combination of 2 commits.
...
# This is the 1st commit message:
MCP4728 consistency & fix ultralcd.cpp
The MCP4728 DAC controls the stepper motor current strenth on the
PRINTRBOARD Rev F and RIGIDBOARD V2 boards.
PR #5792 on 9 FEB 2017 implemented default drive percentages but only on
the RIGIDBOARD V2.
This change moves the default settings to Configuration_adv.h.
Also, ultralcd.cpp won't compile because of a type def conflict.
Changed it to match the one in stepper_dac.cpp
===========================================================
reword stepper curent section for clarity
===========================================================
change name & improve comments
===========================================================
changed name from A4JP to SCOOVO_X9H per PR #6139
# This is the commit message #2 :
fix typo
8 years ago
f5c5c1f771
Rename all UBL files with a ubl_ prefix
8 years ago
eb1e6aa29b
Use same config name for all mesh dimensions
8 years ago
3412950abc
Merge pull request #6209 from thinkyhead/rc_psu_zero
...
Power Supply 0 as "General"
8 years ago
699310d1d2
Fix: Thermal runaway if nonexistent bed's temp is set
8 years ago
5bce731962
Fix LCD preheat menus
8 years ago
54173c80ad
Power Supply 0 as "General"
8 years ago
7a7a80e6c5
status_printf => lcd_status_printf_P
8 years ago
0e6ec34228
Use PSTR versions of lcd_status... to save SRAM
8 years ago
73e193da1d
Implement LCD_BED_LEVELING for PROBE_MANUALLY
8 years ago
fcadc7bb1a
Implement the "manual" option for ABL
8 years ago
a5e085cbea
Have run_probe() return probe Z, not nozzle Z
8 years ago
9e4bd6b3b5
Further repairs to UBL, comments, spacing
8 years ago
c9eb1d6ab7
Make MBL a static class, use lookup for index-to-point conversion
8 years ago
de9d2cddc3
Merge pull request #6152 from thinkyhead/rc_cleanup_6150_etc
...
UBL cleanup, optimization
8 years ago
9217e4b8ec
Various UBL cleanups and bug fixes
8 years ago
d38b1bc4b1
Show filament width sensor values in LCD constantly if SD card support is not enabled.
8 years ago
d8724bb546
Get G29's P1 (Automated Probing) working again.
...
Incorrect optimizations of data types and ternary operators caused some
issues.
8 years ago
d076c1b604
Apply some general cleanup to code
8 years ago
e244399766
Additional cleanup of UBL code
8 years ago
b904b5ae8d
Audible feedback for settings store/load/reset
8 years ago
72f7b14e66
Make G29's Interactive Mesh Editor Work
8 years ago
3fd74b121f
Get G29's Interactive Mesh Editor running
...
G29 P4 R O should work now.
8 years ago
ff0dd162b7
PARK_HEAD_ON_PAUSE implementation
8 years ago
9b2b53f63a
Merge pull request #6042 from thinkyhead/rc_fix_toolchange_z
...
Move Z last in tool-change for SWITCHING_EXTRUDER
8 years ago
77cf648ed3
Move menu selection past static items in 1 screen
8 years ago
fb60aa3736
UBL implementation
8 years ago
11f1fdfab4
_lcd_level_bed_position => manual_probe_index
8 years ago
0e410c9dfd
Software endstop options as simple switches
8 years ago
d01b915085
Implement soft_endstops_enabled for clamping
8 years ago
3e927ff204
Replace MBL Z hacking
8 years ago
f02af83d42
Remove some extraneous spaces
8 years ago
2defb1d748
Use SET_INPUT_PULLUP where appropriate
8 years ago
3830778852
Apply NO_WORKSPACE_OFFSETS to lcd menu
8 years ago
7e3aab889d
Fix preheat menu formatting
8 years ago
6c5312559c
Menu item to preheat only the hotend
8 years ago
9d0142e8ae
Move Change Filament above Cooldown
8 years ago
0c55095c5e
Move Cooldown above Preheat
8 years ago
34253497d4
Babysteps code tweak
...
As suggested by https://github.com/MarlinFirmware/Marlin/pull/5887#issuecomment-283832163
8 years ago
fb4aead2b1
Clean up and finish #5887
8 years ago
11e892bd84
Merge pull request #5887 from Roxy-3D/RCBugFix
...
Double Click of Encoder Wheel Jumps to Z-BabyStepping
8 years ago
34cba42104
Use PSTR for MSG_HEATING
8 years ago
584d147a02
fixup the indentation
8 years ago
e443e0e2a9
Fix scoping issues for double click to Z-Babystepping
8 years ago
17d1cd7c09
Double Click of Encoder Wheel Jumps to Z-BabyStepping
8 years ago
cd68380ce6
Add status_printf to print messages to the lcd status line.
...
Also add a hotend indicator to the heating message displayed on the lcd status line.
8 years ago
6e0b3fcc08
Optimize M600 heater status LCD items
8 years ago
d9dcef8a87
Spacing, coding standards
8 years ago
8bf0b496b9
Improve M600 with timeout, wait for heatup.
8 years ago
c40fe2113c
Fix for broken MBL
...
LCD call was waiting forever, causing the system to hang.
8 years ago
4d4745c0eb
Parenthesize some menu defines for safety
8 years ago
a561bd5e3a
New feature: SDCARD_SORT_ALPHA
8 years ago
e44294bb4d
Make HOTEND_LOOP more consistent, let compiler optimize it
8 years ago
1bc5be3bdf
Cast DELTA_PRINTABLE_RADIUS to float in sq()
...
Addressing #5625
8 years ago
fb3c30e24c
Fix lcd_wait_for_homing causing menu to block
...
As a showcase function for how to do waiting in the lcd menu, this function should be preserved.
8 years ago
f8ae0fd29f
Merge pull request #5647 from manianac/RCBugFix-PrepareMenuFix
...
Fix empty Prepare menu
8 years ago
aab5118c6a
Remove error causing break command
...
Use index macro instead of e
8 years ago
306c184b1a
Allow M600 when dryrun debugging
8 years ago
61f15ef7e7
Fix 5194
...
I have been a bit too radical in cleaning up this section.
8 years ago
1a26ce1cdc
Merge pull request #5550 from FHeilmann/patch-2
...
Allow negative retract values in the LCD
8 years ago
1cba425308
Allow negative recover-swap length from LCD
8 years ago
644f45cbd8
Merge pull request #5563 from akaJes/m600
...
FILAMENT_CHANGE_FEATURE allowed in idle mode
8 years ago
0d2fc13516
Place "Level Bed" closer to "Auto Home"
8 years ago
b031d28ebf
Encoder events should not skip stripes
8 years ago
22881f38b9
Fix updating of "bool" menu items
8 years ago
LVD-AC