Ludy
e5019a0481
Fix English special symbols ( #12529 )
6 years ago
Scott Lahteine
09d6db491a
Fix wait_for_bed compile error
6 years ago
Roman Moravčík
d545f984b0
Update Slovak translation ( #12523 )
6 years ago
Ludy
730f223100
Correct FANMUX2_PIN ( #12538 )
6 years ago
Yücel Temel
d857cdfb27
Update Turkish language ( #12524 )
6 years ago
Scott Lahteine
4a7c6f7241
NUM_ARRAY => COUNT
6 years ago
Giuliano Zaro
31113c5adf
Update Italian language ( #12512 )
6 years ago
Scott Lahteine
b57343c255
Put status screen options in Configuration_adv.h
6 years ago
Scott Lahteine
1fcc13b011
Allow Serial Overrun Protection to be disabled
6 years ago
Scott Lahteine
29c53f2402
Hide some compile warnings
6 years ago
Scott Lahteine
caca3c8503
Use wait_for_bed with WAIT_FOR_BED_HEATER
...
Addressing #12517
6 years ago
Scott Lahteine
f1efcfed14
Fix backslash in language_test.h
6 years ago
Yücel Temel
3b186a55ac
Don't show superscript ³ with NOT_EXTENDED_ISO10646_1_5X7 ( #12513 )
6 years ago
Scott Lahteine
82c96c971e
Bring superscripts slightly lower in BDF fonts
6 years ago
Sinisa Culic
8a0992d921
Fast PWM for controller fan ( #12485 )
6 years ago
Ludy
e98d195901
Remove extra declarations in cardreader.cpp ( #12520 )
6 years ago
Scott Lahteine
fd2998efd5
Revert ADC_KEYPAD direction behavior ( #12508 )
6 years ago
Scott Lahteine
d29cb09b3e
Fix a minor compile warning
6 years ago
Yücel Temel
5b1d52671c
Use superscript 3 in language_en.h ( #12504 )
6 years ago
Marcio Teixeira
7109dadd21
Additional pin definitions for Archim 2 ( #12500 )
...
- Added GPIO pins to Archim 2
- Added new 108 pin to `fastio_Due.h`
6 years ago
Andy Shaw
4975b13b74
Fix problems with LPC1768 EEPROM flash emulation ( #12503 )
...
* Remove duplicate calls to PrepareSector
Some flash memory API calls require that a call to `PrepareSector` is done before use. However this call is already made by the LPC1768 framework so the calls in this code are not required.
* Ensure correct alignment of RAM buffer
The LPC176X flash API requires that the RAM buffer used for write operations must be word-aligned. This change ensures that this is the case.
6 years ago
Scott Lahteine
b738972e69
General cleanup of Re-ARM pins
6 years ago
Scott Lahteine
ee423dcdd0
Invert hotend bitmaps, by default
6 years ago
Scott Lahteine
c5642a894f
Fix ADC_KEYPAD middle button ( #12493 )
6 years ago
Scott Lahteine
0946cbcdca
Revert some const changes (for now)
6 years ago
Scott Lahteine
4def8b3b5e
Expanded options for _Statusscreen.h ( #12455 )
...
See the PR for full details. The updated system will be documented on the website in the near future.
6 years ago
Scott Lahteine
d51e5690f4
Don't show updir with no card present
6 years ago
Scott Lahteine
ec9d21a234
Shift YZ on graphical display to fit Z+123.45
6 years ago
Scott Lahteine
817a37169a
Apply/unapply const here and there
6 years ago
Scott Lahteine
643e0066a0
Followup to #12451
6 years ago
Marcio Teixeira
4bcb63b705
Fix for #12482 ( #12483 )
...
Fix Z-move to uninitialized position in SWITCHING_EXTRUDERS tool_change (no_move=true)
6 years ago
Marcio Teixeira
50ee747787
Fix compilation errors. Followup to #12439 ( #12481 )
6 years ago
Ludy
90a58488b5
Corrected unused var, default switch, Travis tests ( #12477 )
6 years ago
Scott Lahteine
a4c15dc54f
Modify MBL to use IJ instead of XY ( #12478 )
6 years ago
Scott Lahteine
fc3f1c4572
Get u8g reference for lcdprint
6 years ago
Scott Lahteine
88c57eaf55
Clean up some u8g code ( #12476 )
6 years ago
Ludy
1f93d2bcf7
Fix LCD compile error, etc. ( #12472 )
6 years ago
Scott Lahteine
826d570162
Combine Travis CI option-setting commands ( #12474 )
6 years ago
Scott Lahteine
9d13f07d09
GTM32 Pro VB changes from Markku Sinisalo
6 years ago
Roman Moravčík
5fbe5cabc8
Fixed displaying of kill MSG_OUTAGE_RECOVERY string. ( #12470 )
6 years ago
kAdonis
4ae9a06c60
Update M303.cpp ( #12471 )
6 years ago
Ludy
c0b75f49b6
Fix "no effect" and "unused variable" compile warnings ( #12473 )
6 years ago
Nils Hasenbanck
5a4fd8e0a6
Fix access to the DWT peripheral for STM32 HAL ( #12434 )
...
Access to the DWT peripheral for the `CYCCNT` register needs to happen before `main()`. The code needs to be called after the setup of the system clocks, so the right place is between the `premain()` and `main()` function of the STM32 Arduino core.
This patch moves the DWT access code to a new function, which is then placed between `premain()` and `main()`.
6 years ago
Scott Lahteine
7f225b9421
Fix MAX_MESSAGE_LENGTH
6 years ago
Scott Lahteine
06674a321a
Remove extra include
6 years ago
Marcio Teixeira
c1e17037e5
Various fixes for MarlinUI and ExtUI ( #12439 )
6 years ago
Giuliano Zaro
d3605cfc26
Don't start watching heaters when target is 0 ( #12453 )
6 years ago
Ludy
93e958f695
Fix compile error with ZONESTAR_LCD+NO_LCD_MENUS ( #12466 )
6 years ago
Ludy
22d7fed60a
Fix compile error with SD_FIRMWARE_UPDATE ( #12462 )
6 years ago
Nils Hasenbanck
779b2709ec
Change temperature pin order for RemRam V1 ( #12458 )
...
Beta testers suggested to adopt the RAMPS order of temperature probe connectors. This commit fixes the order to the RAMPS order.
6 years ago
Scott Lahteine
8ebb4dc294
Followup to static CardReader
6 years ago
Scott Lahteine
7ee5894360
Allow float XY probe offsets
...
Responding to #12383
XY probe offsets should be integers because adding decimal points makes the code larger. But if decimals are very much wanted, this commit removes the old restriction.
6 years ago
Giuliano Zaro
43ecdb606f
Fix a compile warning ( #12452 )
6 years ago
Ph0non
984c4ba8c7
Enable SD Card on RepRap Display and RADDS ( #12446 )
...
* Enable SD Card on RepRap Display and RADDS
Define the necessary pins in `pins_RADDS.h` (copied from the `RADDS_DISPLAY` section) for the use of the SD card slot on RRD.
6 years ago
Ludy
56a94c2a26
Use 'target_extruder' in M104 as with M109 ( #12448 )
6 years ago
Scott Lahteine
66580f32c2
Make CardReader class static ( #12451 )
...
* Make CardReader a static class
* Make CardReader flags into bitfields
6 years ago
Scott Lahteine
3e9ffaddb6
Consolidate, optimize some LCD menu code ( #12450 )
6 years ago
Scott Lahteine
d97e31db4c
Optimize Power-Loss Recovery ( #12440 )
6 years ago
Mateusz Krawczuk
ca21ac6b9b
Support two MAX6675 thermocouples ( #8686 )
6 years ago
Scott Lahteine
0e610815e4
No need for Cap:PAREN_COMMENTS
6 years ago
Scott Lahteine
7a075a5dc9
Tweak extruder errors
6 years ago
Scott Lahteine
2d92f333f5
Fix GcodeSuite::T active_extruder reference
6 years ago
Scott Lahteine
d2bb53702a
Optimize target_extruder, ignore T with mixing ( #12432 )
...
* Optimize target_extruder, ignore T with mixing
* Give G-code Tn parity with tool_change
6 years ago
Marcio Teixeira
5e586a6b39
Fix to runout sensor code. ( #12431 )
...
- "old_state" is no longer a class static variable.
6 years ago
Scott Lahteine
d82c350de7
Miscellaneous LCD code renaming, reordering ( #12430 )
...
* Move special characters to language.h
* Apply some naming standards
* Clean up menu item draw functions
* Rename some Temperature methods
* UI => ExtUI
6 years ago
Scott Lahteine
edfd106bc5
Rejigger Filament Runout class ( #12428 )
6 years ago
Scott Lahteine
f4c128ecaa
Move RRW keypad code to a common method ( #12429 )
6 years ago
Scott Lahteine
54ec5528a0
hasstatus => has_status
6 years ago
Scott Lahteine
ebf585b673
Fix an old sanity check
6 years ago
Ryan
052d102ded
UltiMachine Archim 1 support ( #12404 )
6 years ago
Scott Lahteine
664e20754d
Clean up pins files
6 years ago
Scott Lahteine
1eb5249598
Fix Formbot Trex-2+ configs
...
Followup to #12422
6 years ago
thiagodesacosta
075a22ed65
Update Portuguese-Brazilian translation ( #12402 )
6 years ago
Marcio Teixeira
3ceab8474c
Add required "cardreader.h" include ( #12419 )
6 years ago
Giuliano Zaro
98c2fc4e42
Endstops fix followup ( #12423 )
...
Followup to #12413
6 years ago
Roxy-3D
f19fd642ce
Updates to Formbot T-Rex 2+ configuration files ( #12422 )
...
Updates to Formbot T-Rex 2+ configuration files
6 years ago
Roxy-3D
cda5ef08fa
Debug of G2-G3 for UBL ( #12386 )
...
Changes only affect UBL. Everything else is left alone.
6 years ago
AnHardt
9ad3aed0ef
Fix tool-change for MIXING_EXTRUDER with < 2 virtual tools ( #12417 )
...
Fix #12416
Better handling of `ENABLED(MIXING_EXTRUDER) && !MIXING_VIRTUAL_TOOLS > 1` - to not fall through to the general case. Fix compiler warnings for `#elif EXTRUDERS < 2`.
6 years ago
Giuliano Zaro
d631267548
Refine endstops fixes ( #12413 )
...
When endstops/probe are enabled `ENDSTOP_NOISE_THRESHOLD` calls to `update` are required to properly re-sync endstops/probe status.
6 years ago
Scott Lahteine
0ee1a92971
Group status methods, share reset_status with Extensible UI ( #12414 )
...
* Group status methods, share reset_status with Extensible UI
* Move common DOGM code to headers
6 years ago
Scott Lahteine
690c4e8457
Clean TLM trailing whitespace
6 years ago
Scott Lahteine
143b2896e0
Add M412 to enable/disable filament runout detection ( #12406 )
6 years ago
Scott Lahteine
a163c89c6a
Followup to 50af1d1
6 years ago
AnHardt
be6271767f
Fix BABYSTEP_ZPROBE_OFFSET ( #12408 )
...
Fix #12399
Did not compile without `WATCH_HOTENDS || WATCH_THE_BED`.
Add condition to include "../../module/temperature.h".
6 years ago
Scott Lahteine
50af1d1e08
Differentiate translated On/Off from Serial ON/OFF
6 years ago
Scott Lahteine
df907a905f
Update UBL comments for debug change
6 years ago
Scott Lahteine
da17f8ad37
For now (!) don't synchronize in M204 and M205
...
See if this has any deleterious effect on motion planning by slicers that inser their own jerk and acceleration controls. The problem I see is that these settings can take effect on blocks already in the planner, and the only way around this would be to shadow these settings in planner blocks and use the shadowed settings in the planner.
6 years ago
Scott Lahteine
a3923424c7
Clean up LCD width/height determination
6 years ago
Scott Lahteine
a0c795b097
Encapsulate common display code in a singleton ( #12395 )
...
* Encapsulate common LCD code in a singleton
* Depend more UBL code on UBL_DEVEL_DEBUGGING
- Since most users don't need the debugging on at all times, this helps reduce the default build size for UBL by over 2K, a little closer to fitting on 128K boards.
6 years ago
Scott Lahteine
9da6809ac3
Adjust some comment spacing
6 years ago
Scott Lahteine
471f403a67
Reduce code size with plain inlines
6 years ago
Scott Lahteine
30a49f5ee2
Apply extra condition to LCD_PROGRESS_BAR
6 years ago
Scott Lahteine
4e0c935959
Update HAL and libs formatting
6 years ago
Scott Lahteine
47483e8c17
Update Raptor config
6 years ago
Scott Lahteine
6093df11dc
Allow G26 to use the active extruder ( #12387 )
...
* Make lcd_quick_feedback argument optional
* Add click_to_cancel option to wait_for_hotend/bed
* Have G26 use the active nozzle and wait_for_hotend/bed
* Use wait_for_release in UBL G29
* Add 'T' parameter to G26 for an initial tool-change
6 years ago
articide
4260282df7
Tevo Little Monster example configuration ( #12370 )
6 years ago
Scott Lahteine
bed15fcd81
Tweak 'echo_not_entered' used by MBL's G29
6 years ago
Scott Lahteine
c239131ff5
Use 'serial_spaces' in 'print_2d_array'
6 years ago
Scott Lahteine
56150ec030
Add reference comments to MeshLevelingState
6 years ago
Ludy
24c5e57bb6
Update German language ( #12379 )
6 years ago
Giuliano Zaro
fd7fd55662
Solve endstops issues ( #12382 )
...
- Partially reverts #11900 and tries to solve #12336
6 years ago
Scott Lahteine
78ccedd6a8
Fix M91x sanity-check to permit TMC2660
...
Fix #12362
6 years ago
revilor
b60abc7c37
[2.0.x] Macro G-codes ( #9365 )
6 years ago
Giuliano Zaro
ccdbf20f60
Update Italian language ( #12368 )
6 years ago
Roman Moravčík
d08847b1a6
Update Slovak translation ( #12376 )
6 years ago
InsanityAutomation
7665dff58b
No error on T0 with single-extruder and fix MIXING_EXTRUDER virtual tools ( #12375 )
6 years ago
Scott Lahteine
4ed6397e5d
More comprehensive NO_LCD_MENUS ( #12367 )
6 years ago
Scott Lahteine
9c8f083d6c
Extend pins errors to include the processor
6 years ago
Scott Lahteine
525ea554a1
Remove obsolete comments
6 years ago
Scott Lahteine
ef724edd80
Apply HAS_LCD_MENU in EEPROM code
6 years ago
Scott Lahteine
b169320a03
Clean trailing whitespace
6 years ago
Scott Lahteine
81b1e9d272
Fix up xdiff, ydiff, zdiff in tool change
...
Followup to #12137
6 years ago
InsanityAutomation
6471a75a22
Combine more tool-change variables ( #12137 )
6 years ago
Scott Lahteine
147e270208
Restore GTM32_PRO_VB temp and heater pins
...
Undo #12345
6 years ago
Scott Lahteine
8def25e475
Set CUSTOM_MACHINE_NAME for some configs
6 years ago
Scott Lahteine
812f6a7dd7
Fix Resume from SD Pause
...
In reference to https://github.com/MarlinFirmware/Marlin/pull/12098#issuecomment-436231690
6 years ago
Scott Lahteine
4f72e041f2
Use card.stopSDPrint() for completeness
6 years ago
Scott Lahteine
488a17b3f5
Use IS_SD_PRINTING() more
6 years ago
Marcio Teixeira
4dbaa6369f
Fix const pointer assignment compile error ( #12350 )
6 years ago
Giuliano Zaro
959ed32636
Update Italian language ( #12352 )
6 years ago
Roman Moravčík
812bfec65e
Update Slovak translation ( #12354 )
6 years ago
Ludy
1624722566
Update German translation ( #12355 )
6 years ago
Scott Lahteine
e574f01568
More advanced pause tweaks ( #12356 )
...
* Followup to LCD_TIMEOUT_TO_STATUS=0
* Make continuous purge screen fit 20x4
* Unify purge message modes
* Preserve last-set pause header mode
6 years ago
Scott Lahteine
5a470d4a49
Apply some tool-change cleanup
6 years ago
Roman Moravčík
34ea458667
Fixed advanced pause messages ( #12353 )
6 years ago
Scott Lahteine
4c5ca89d8c
Show the appropriate pause message ( #12348 )
6 years ago
Marcio Teixeira
8517d5f915
LCD menu code refactoring and cleanup ( #12308 )
6 years ago
Scott Lahteine
b3b4e6dc45
Change Marlin debug flag names to fix conflicts ( #12340 )
...
In reference to #11000
6 years ago
Giuliano Zaro
f7e682eeee
Update Italian language ( #12344 )
6 years ago
Phr3d13
a813900fce
Add Geeetech Rostock 301 config, update GTM32 Pro VB pins ( #12345 )
6 years ago
Scott Lahteine
04f173790f
Remove trailing whitespace
6 years ago
Scott Lahteine
c536ee1122
Clean up bq Zum Mega 3D pins
6 years ago
Scott Lahteine
c31e1735dd
Restore LPC1768_PIN_INTERRUPT_M, apply to Z3
...
- In reference to #12166
6 years ago
Scott Lahteine
93d5b945dd
Hide mesh editing until a valid mesh exists
6 years ago
Ludy
f34f09c821
Update German language ( #12336 )
6 years ago
Roman Moravčík
eefd7676a3
Updated slovak translation ( #12338 )
6 years ago
Scott Lahteine
486f2a66a9
Fix MBL XY parameter error messages
...
Fix #11522
6 years ago
Scott Lahteine
2613ddf61c
Fix "circle"
6 years ago
Scott Lahteine
b779b42ffd
Prevent current step-down going negative
...
Addressing #11348
6 years ago
Scott Lahteine
427bc64ba1
G28 O respects HOME_AFTER_DEACTIVATE
...
Addressing #11271
6 years ago
Scott Lahteine
3866aeac52
Clean up ENCODER_RATE_MULTIPLIER config
6 years ago
Scott Lahteine
498dfa291e
Update and fix CHDK
6 years ago
Scott Lahteine
fed84f2961
Use multiplier edit item for mesh point editing
6 years ago
Scott Lahteine
d5ab4cd22a
Provide a default for Z_PROBE_LOW_POINT
6 years ago
Scott Lahteine
3cbc3ecdd7
Fix 'M43 T' to use 'L' as last pin
...
- The documentation is correct. The code was wrong.
6 years ago
Scott Lahteine
1769249876
Recommend keeping endstops off
6 years ago
Scott Lahteine
5182eaf661
Fix endstops enable behavior during probing
...
Fix a bug introduced in #9582
6 years ago
Scott Lahteine
07a0822ebe
M420 support in MARLIN_DEV_MODE
6 years ago
Scott Lahteine
63be48ada6
Add MESH_EDIT_MENU to example configs
6 years ago
KangDroid
82ff7c6542
Add a mesh edit menu for MBL / ABL-Bilinear
6 years ago
Scott Lahteine
44fa7fb18c
Cleanups for leveling-related code
6 years ago
Scott Lahteine
cc2bc67440
ENABLED(NEWPANEL) => HAS_LCD_MENU
6 years ago
Scott Lahteine
fc84878cba
MSG_UBL_EDIT_MESH_MENU => MSG_EDIT_MESH
6 years ago
Scott Lahteine
cd066bfeba
Extend error messages for E factors sanity-checks
6 years ago
Ludy
c10edb0998
Update, correct sanity-checks for up to 6 extruders ( #12333 )
6 years ago
Scott Lahteine
0c85869c26
Clean up file endings
6 years ago
Scott Lahteine
b99f0776d6
Clean up some U8G files
6 years ago
Scott Lahteine
8014e1cc9d
Allow disable of LCD_TIMEOUT_TO_STATUS (when 0)
6 years ago
Giuliano Zaro
bd05816fd8
Update Italian language ( #12327 )
6 years ago
Scott Lahteine
3c21483c88
Provide DOGLCD SPI pins for MKS SBASE + VIKI
6 years ago
Scott Lahteine
e0956bb572
Drop 'register' storage specifier
6 years ago
Scott Lahteine
c04cf127f7
Fix EEPROM servo angles init, section grouping
6 years ago
Scott Lahteine
9c0e05552e
Suppress some compile warnings
6 years ago
Karl Andersson
176654791e
Use board-specific or platform SPI pins in HAL_STM32 ( #12323 )
6 years ago
Scott Lahteine
60dbd8161c
Fix VMAX editing
...
Fix #12326
6 years ago
Scott Lahteine
b7ca93ba37
Remove dead comment
6 years ago
Scott Lahteine
608be966d7
Add servos to pins_FYSTEC_F6_13.h
6 years ago
Hannes Brandstätter-Müller
67b22760d9
Return to status to show manual deploy/stow messages ( #12324 )
6 years ago
tharts
f5e8e8b53d
Fix broken LPC176x build ( #12317 )
...
* Fix broken LPC176x build
* Add UBL+HD44780 test for LPC1768
6 years ago
Scott Lahteine
f5eab912ed
Apply #pragma once, misc cleanup ( #12322 )
...
* Apply #pragma once in headers
* Adjust some thermistors formatting
* Misc cleanup and formatting
6 years ago
Scott Lahteine
8696f882a9
Merge pull request #12313 from thinkyhead/bf2_scara_home_offset
...
Revive SCARA home offset (not fully implemented)
6 years ago
Scott Lahteine
56d2dcb184
Use first_page flag in place of page.page == 0
6 years ago
Scott Lahteine
d1ff22b983
Revive SCARA's home offset (unimplemented)
6 years ago
Scott Lahteine
2c9586be0c
Clear up HAS_WORKSPACE_OFFSET meaning
6 years ago
Scott Lahteine
6e3caf23b6
IS_DELTA => ENABLED(DELTA)
6 years ago
Scott Lahteine
19f49db96f
Tweak / reduce menu items
6 years ago
Scott Lahteine
e4cf175163
Synchronize on M204, M205 ( #12302 )
...
* Add parser.seen for multiple parameters
* Fix M666, use !seen for report
* Synchronize on M204, M205
6 years ago
Ludy
5ba6607181
Fix keypad-related compile error ( #12306 )
6 years ago
Scott Lahteine
2fb2e286ee
Followup to #12256
6 years ago
Scott Lahteine
3eb9838dca
Simplify TMC sanity-checks
6 years ago
Scott Lahteine
f5b31e218d
Followup to #12082
6 years ago
Scott Lahteine
31c28d0dd2
Drop pgm_read_*_near and let headers choose ( #12301 )
...
- Drop `pgm_read_*_near` and let headers choose.
- Define `USE_EXECUTE_COMMANDS_IMMEDIATE` as a conditional.
- Add `process_subcommands_now` for SRAM-based commands.
6 years ago
Scott Lahteine
fce150f094
inline static => static inline
6 years ago
Giuliano Zaro
323c088356
Restore LED light color after pid tuning ( #12082 )
6 years ago
Ludy
9f77df2590
Followup to menu refactor. TMC warnings, sanity. ( #12288 )
...
- Followup fixes for menu refactor
- Fix TMC sanity checks, unused var warnings
6 years ago
Nils Hasenbanck
cafabf2055
Implement DELAY_NS with CYCCNT on Cortex-M7 ( #12283 )
6 years ago
Scott Lahteine
f5498168ae
Ensure PENDING/ELAPSED use a 32-bit integer
6 years ago
MasterPIC
6e041b9c61
Use blink to show more info on LCD ( #12256 )
6 years ago
Scott Lahteine
eb5600acd2
Add parentheses to LCD_CLICKED
6 years ago
Scott Lahteine
42f8b6c530
Make M125 work with SDSUPPORT ( #12289 )
6 years ago
Scott Lahteine
f319087372
Followup to #12293
6 years ago
AnHardt
74bbb13008
Fix Mixer calculations for 32-bit processors ( #12293 )
6 years ago
Scott Lahteine
549d11225a
Add to description of Z_STEPPER_AUTO_ALIGN
...
In response to #12272
6 years ago
Scott Lahteine
2cff0d1f39
Move menu_level_bed_corners to its own file
6 years ago
Scott Lahteine
44f2a82a56
Move axis_homed, axis_known_position to motion.*
6 years ago
Scott Lahteine
946cf8b453
EEPROM read code grouping
6 years ago
Ludy
f2adb4b9cc
Update German language ( #12280 )
6 years ago
Karl Andersson
484ca68228
Fix misplaced parentheses ( #12284 )
6 years ago
Scott Lahteine
1d366db764
Tweaks to CR-10S configuration
6 years ago
Scott Lahteine
b5d7f69b51
Followup to #12249
6 years ago