4c872a01f2
G-code queue singleton, front injection ( #14236 )
5 years ago
eb1c9113c2
Try to init SD with no detect pin
6 years ago
bf8bfb5c66
Add Coolant Control M7/M8/M9 ( #10745 )
6 years ago
1ef95013f0
Update Marlin.cpp includes, defines
6 years ago
c88d9ae282
Option to leave heaters set on SD abort ( #14251 )
6 years ago
80ce0d2bdb
Whitespace cleanup
6 years ago
5ca8d51e12
Ability to insert G-code in front of queue ( #14229 )
6 years ago
36a0376c36
fix TMC2208 boot loop with SW UART
...
Need stepper .begin() before calling susbequent .push()
6 years ago
49e83dd7c8
BLTouch V3.1 changes ( #14104 )
6 years ago
1c86fbc60b
TMC updates, capture LCD changes ( #14074 )
6 years ago
7ccbcf2eaa
Fix TMC EEPROM regression ( #14008 )
...
Partially undo 15357af
6 years ago
5108e4b6aa
Cleaner EEPROM auto init ( #13975 )
6 years ago
ad4ffa1d2f
Use C++ language supported 'nullptr' ( #13944 )
6 years ago
23ec650410
Consolidate Malyan LCD and ExtUI
6 years ago
5dcb25664f
Option to Auto-Initialize EEPROM ( #13935 )
6 years ago
15357af67c
Backlash cleanup ( #13659 )
...
…And save backlash, fil. sensor, ExtUI userdata to EEPROM.
6 years ago
51d1e0f1dd
Auto-mount the SDIO SD card ( #13879 )
6 years ago
e6ebd30f60
Fix LCD issue on stepper timeout ( #13630 )
...
- Remove a re-paint of the status screen on stepper timeout, which would cause a garbled LCD with `LIGHTWEIGHT_UI` and could interrupt whatever else the user might be doing in a submenu (such as playing games!)
- Use the helper function to reset stepper timeout.
6 years ago
fae2b7edc3
Update MMU2 code style
6 years ago
c8a83fb122
SPINDLE_LASER_ENABLE => SPINDLE_LASER_ENA
6 years ago
cacec5764a
Clean up whitespace
6 years ago
f1810689ff
Fix bootscreen condition
6 years ago
46445a5a16
Event G-code for Stop SD Print ( #13547 )
...
Co-Authored-By: 7eggert <7eggert@gmx.de>
Co-Authored-By: robbycandra <robbycandra.mail@gmail.com>
6 years ago
5679fae11e
UltraLCD enhancements (lower fan resolution, backlash menu) ( #13519 )
6 years ago
691e5c3bb8
BLTouch V3.0 support ( #13406 )
6 years ago
49cf92dc36
Extended condition macros ( #13419 )
...
Allow `ENABLED`, `DISABLED`, `PIN_EXISTS`, and `BUTTON_EXISTS` to take multiple arguments. Also add:
- Alias `ANY(...)` for `!DISABLED(...)`
- Alias `ANY_PIN(...)` for `PIN_EXISTS(a) || PIN_EXISTS(b) ...`
- Alias `EITHER(A,B)` for `ANY(...)`
- Alias `ALL(...)` and `BOTH(A,B)` for `ENABLED(...)`
- `NONE(...)` for `DISABLED(...)`
6 years ago
67bee06e43
No patch needed for non-libmaple analogWrite
...
See https://github.com/pinchies/Marlin/pull/1#issuecomment-471388743
6 years ago
f89b375fb9
Fixes and improvements for PWM pins ( #13383 )
6 years ago
b824a517aa
Add G38.4 and G38.5 ( #13348 )
6 years ago
e4d080e63c
Reset after kill with a button on the KILL_PIN ( #13091 )
6 years ago
12503fce06
Followup to wait_for_user fix
6 years ago
60e82e3929
Send notifications to ExtUI for M0/M1 ( #13344 )
...
- Send notifications to ExtUI for M0/M1
- wait_for_user can be non-volatile (not changed by interrupt)
C / C++ compilers don't optimize away reads of non-volatile variables when a function call is used between accesses, because *any* variable could be changed by the function call. Since `wait_for_user` can't be changed without a function call, it should be non-volatile so the compiler can optimize away cases where it is read more than once without an intervening function call.
6 years ago
cfdb38eda4
Allow SERIAL_ECHOPAIR to take up to 12 pairs ( #13311 )
6 years ago
a2e3226597
Init XYZ to configured home position
6 years ago
eb4bf93ea4
Add more Babystep options ( #13262 )
6 years ago
ddbe4cfa20
Printrboard G2 support ( #13116 )
6 years ago
89bbc30a09
Fix init of power supply pin
...
Fix #13184
6 years ago
992cdc8d14
Fix host action / G-code ordering in event_probe_failure ( #13207 )
...
Observing from the console, it makes the most sense to do `//action:probe_retry` before executing commands.
6 years ago
d2bdb71c13
Add PHOTO_GCODE option, photo trigger physical move ( #13168 )
6 years ago
bdc2f10b90
Update Italian language, fix unused var warning ( #13164 )
6 years ago
9f0e1834ec
Followup to #13039 ( #13163 )
...
- Fix compile error when accessing `process_subcommands_now_P`.
- Use `const` var eliminating double-negative (to make code more understandable).
6 years ago
7cf9b93f26
Add HAS_FILAMENT_SENSOR ahead of 12962
6 years ago
7f1b69b0c8
Add HOST_PROMPT_SUPPORT ( #13039 )
6 years ago
0feeef2604
Update copyright in headers
6 years ago
524c6c10bf
MAGNETIC_PARKING_EXTRUDER ( #12351 )
6 years ago
5cfc1cdacc
Support SWITCHING_NOZZLE with 2 servos ( #13054 )
6 years ago
6a57d0b381
Prusa MMU2 ( #12967 )
6 years ago
48a3502656
Remote streamer improvements ( #12982 )
6 years ago
2f35747f29
L6470 SPI daisy chain support ( #12895 )
6 years ago
7bb5d4bfe8
Small LED code reorganization ( #12929 )
6 years ago
8f4c6e6d1a
Fix case light on boot ( #12919 )
6 years ago
082f6a27de
ADAPTIVE_FAN_SLOWING extension to hotend thermal protection ( #12853 )
6 years ago
55144284c2
TMC connection test, spreadCycle parameters, improved debugging ( #12616 )
6 years ago
c986239837
A single SERIAL_ECHO macro type ( #12557 )
6 years ago
66580f32c2
Make CardReader class static ( #12451 )
...
* Make CardReader a static class
* Make CardReader flags into bitfields
6 years ago
d97e31db4c
Optimize Power-Loss Recovery ( #12440 )
6 years ago
a0c795b097
Encapsulate common display code in a singleton ( #12395 )
...
* Encapsulate common LCD code in a singleton
* Depend more UBL code on UBL_DEVEL_DEBUGGING
- Since most users don't need the debugging on at all times, this helps reduce the default build size for UBL by over 2K, a little closer to fitting on 128K boards.
6 years ago
e574f01568
More advanced pause tweaks ( #12356 )
...
* Followup to LCD_TIMEOUT_TO_STATUS=0
* Make continuous purge screen fit 20x4
* Unify purge message modes
* Preserve last-set pause header mode
6 years ago
498dfa291e
Update and fix CHDK
6 years ago
44f2a82a56
Move axis_homed, axis_known_position to motion.*
6 years ago
3583e2b449
Followup to Menu Refactor ( #12275 )
6 years ago
fc31da1114
Implement custom delay/millis for EXTENSIBLE_UI ( #12188 )
6 years ago
e5ae7a07d1
Suppress compiler warning
6 years ago
9969c06cb5
Fix compiler warning
6 years ago
2e5e689a7f
Fix kill() and ExtensibleUI ( #12160 )
...
* Fix to isPrintingFromMedia()
- isPrintingFromMedia() will now return true even if SD print is paused.
- isPrintingFromMediaPaused() allows UI to determine if the print is paused.
* Don't use _delay_us in minkill (#12145 )
- In HAL_DUE, _delay_us is simply an alias for delay, which causes the board to hang and subsequently reboot due to the watchdog timer.
* Shorten code with IFSD macro
6 years ago
b381cad399
Clean up trailing whitespace
6 years ago
1fb9b299d4
Add M524 to abort SD printing ( #12155 )
6 years ago
c6a5c74208
Add parentheses to SD macros
6 years ago
8c02dd971b
Move disable_all_steppers to minkill
6 years ago
3847c08f7e
Disable heaters/steppers before message
6 years ago
71e19baf69
Fix kill => disable_all_heaters => print_job_timer.stop ( #12146 )
...
- Remove `print_job_timer.stop()` from `disable_all_heaters`
- Call `print_job_timer.stop()` for relevant `disable_all_heaters()`.
- Split up `kill()` for watchdog interrupt safety
6 years ago
f56968ba0b
New Continuous Filament Mixer ( #12098 )
6 years ago
1407afad73
Move SENSITIVE_PINS to its own file
6 years ago
906a24fa81
Extensible user interface API ( #11193 )
6 years ago
d6b0fbd771
Use uint8_t for all fan speeds ( #12032 )
6 years ago
c447d75916
Add support for TMC2660 ( #11998 )
6 years ago
2067619a26
Add USB_FLASH_DRIVE_SUPPORT
6 years ago
c3229e1b34
Migrate to a new TMC library ( #11943 )
6 years ago
c75f5a376b
Tweak some comments
6 years ago
11ac75edcb
Use PGM_P for PSTR pointers ( #11977 )
6 years ago
2ecfda80ac
Improve support for JTAG/SWD pins reuse ( #11963 )
...
STM32 can reuse JTAG and SWD pins separately. Add `DISABLE_DEBUG` option to disable both interfaces and retain `DISABLE_JTAG` to disable JTAG only.
6 years ago
84926b1d5a
HAL general support for DISABLE_JTAG option ( #11211 )
...
Some STM32-based boards may use multiplexed JTAG pins as IO. Up to now the `DISABLE_JTAG` option (defined in pins files) was only supported for AT90-based boards. This commit generalizes the code and adds support for boards based on STM32F1 and STM32F4.
6 years ago
1718eff54a
Code changes supporting up to 6 extruders
6 years ago
c437bb08f1
Overhaul of the planner ( #11578 )
...
- Move FWRETRACT to the planner
- Combine leveling, skew, etc. in a single modifier method
- Have kinematic and non-kinematic moves call one planner method
6 years ago
1933d5d6fb
Fix SD autostart with no LCD
6 years ago
1b6bc19427
Add external closed loop controller support
6 years ago
56f1e17a25
[2.0.x] Max7219 cleanup, simplify, and extend ( #11575 )
6 years ago
fbcdf5eaeb
Simplify stepper driver per-axis selection
6 years ago
566d05006d
report_state > event_handler
...
Make the endstop report method track endstop changes on its own.
6 years ago
1a0f4dedad
Fix and improve POWER_LOSS_RECOVERY ( #11187 )
6 years ago
cedc158106
[2.0.x] Board specific init macro ( #11170 )
6 years ago
d4795e5b8e
[2.0.x] Tweaks and additions for MAX7219 ( #11034 )
7 years ago
e2aeda61ed
HAL for Espressif ESP32 Wifi
7 years ago
f2c3b0d476
Use bit flags for homed/known
7 years ago
968a5d2e63
Protected pin err for M226
7 years ago
0ca9db7051
Correct HOTENDS for SWITCHING_EXTRUDER
7 years ago
569df3fc0c
Fix interrupt-based endstop detection
...
- Also implemented real endstop reading on interrupt.
7 years ago
a11eb50a3e
Refactor and optimize Stepper/Planner
...
Better encapsulation and considerably reduce stepper jitter
7 years ago
3c76bda2d8
Fix switching extruder
...
`DONT_SWITCH` got lost along the way. Replace it with `DO_SWITCH_EXTRUDER` and adjust the code.
7 years ago
35258dd50b
Consistent heating status and status reset
...
Fix #10699
7 years ago
Scott Lahteine