Dabble63
6b45e9f167
Add Duty Cycling to the Heater Bed
13 years ago
Chris Palmer
538189cc19
Fixed soft limits when the origin is in the middle.
...
HOME_POS is now always where the endstop is and can be outside the limits.
The limits are now defined by MIN_POS and MAX_POS rather than HOME_POS and MAX_LENGTH.
The Z is axis now homed first if direction is away from the bed.
Saguinololu limit pins change from MIN to MAX according to the homing direction.
13 years ago
ErikZalm
686011a548
Fixed typo
13 years ago
Erik van der Zalm
cd57bf305b
Merge git://github.com/daid/Marlin into Marlin_v1
...
Added invert step pins to corexy code
13 years ago
Erik van der Zalm
ea2c19f978
Added CoreXY support (Thanks Ilan Moyer)
13 years ago
Erik van der Zalm
aa65fe22ed
decoupled axes sucessfully at least on pure x or y jog
13 years ago
daid
12de8fff81
Support step motor controllers with active low step pins.
13 years ago
Erik van der Zalm
b67dacdc8f
Fixed AD595 define
13 years ago
Bernhard
d3002ef741
corrected retract
13 years ago
Bernhard
0c123950e9
__ header file replace
13 years ago
Bernhard
bf077125b9
added firmware retract. disabled by default
13 years ago
Bernhard
88d2a671cc
readme corrected
13 years ago
Bernhard
0e5e249ab5
added individual pullup setting option to have finer control in case there is a special z-min sensor, for example
13 years ago
Bernhard
e792d62f47
readme
13 years ago
Bernhard Kubicek
6b14f95b3e
Merge pull request #170 from linagee/Marlin_v1
...
Marlin v1
13 years ago
Bernhard Kubicek
c7ce99d495
Merge pull request #172 from daid/Marlin_v1
...
Add M401 - Wait for user to press button on LCD (with optional timeout) minor fix in M115.
13 years ago
Bernhard Kubicek
b7fc14bc65
repaired thermistortable_6 by graphcial fitting of the off-slope values. see issue 179. Erik, I know you asked for no changes, but this file probably is not related and hopefully allright.
13 years ago
ErikZalm
9e1021efbe
Fixed SL bug.
13 years ago
Daid
e9bec9b6fe
Fixed E1_ENABLE pin for Ultimaker. This was wrong for the 1.5.4 and 1.5.3 PCB (I cannot check the 1.5.6)
13 years ago
linagee
fbd282b3ba
Update Marlin/Configuration.h
13 years ago
linagee
2e8c5049c5
Update Marlin/thermistortables.h
13 years ago
linagee
2d0d8e5272
Small correction.
13 years ago
Daid
4d7fe7115f
Changed M401 to M0/M1 as suggested, so they match normal CNC stop commands.
13 years ago
linagee
9e9db65c3f
Update Marlin/thermistortables.h
13 years ago
linagee
bd966ef389
Update Marlin/thermistortables.h
13 years ago
linagee
775da3f103
Added top ratings and extended to ADC=1 for table 3 and 5.
13 years ago
linagee
96a4baa0be
Update Marlin/thermistortables.h
13 years ago
linagee
2aa9f7b131
Update Marlin/thermistortables.h
13 years ago
linagee
c4490f5f3d
Update Marlin/Configuration.h
13 years ago
linagee
dd9144994e
Tested May 19 - It works! Verified with separate thermocouple TM-902C also.
13 years ago
linagee
4c37d0d9f1
Extended range above 250C. (Operating range states up to 300C)
13 years ago
Daid
b59724e42b
Add strigification for extruder amount in M115 report.
13 years ago
Daid
16413bb8f2
Last M401 update, refresh the LCD during an M401 wait.
13 years ago
Daid
b3941fce5c
Update after testing
13 years ago
Daid
d494688565
Do not initialize in the header file.
13 years ago
Daid
516ec90242
Add M401 - Wait for user on LCD button press
13 years ago
Daid
7244aa7eb7
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1
13 years ago
linagee
de2ca3b2e8
Grammar correction.
13 years ago
linagee
c2fc466e1b
Update Marlin/Configuration.h
13 years ago
linagee
241f5a4c0e
Update Marlin/thermistortables.h
13 years ago
linagee
9f9f498491
Update Marlin/Configuration.h
13 years ago
Erik van der Zalm
e31bef31ad
Limit PID autotune PWM to PID_MAX
13 years ago
ErikZalm
b2a9ccdb97
Merge pull request #159 from MaikStohn/Marlin_v1
...
Marlin v1 - BUG FIXES / CORRECTIONS
13 years ago
Erik van der Zalm
d459fb41b7
Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1
13 years ago
ErikZalm
804e0d6117
Merge pull request #164 from guanix/Marlin_v1
...
Melzi support
13 years ago
ErikZalm
bb499421e9
Merge pull request #166 from zittix/Marlin_v1
...
Fixes #153 for bad call to abs()
13 years ago
Erik van der Zalm
ba96059203
add additional dropsegments test
13 years ago
zittix
fbd91ab0b5
Fixes #153 for bad call to abs()
13 years ago
MaikStohn
b51c06e2b3
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1
13 years ago
MaikStohn
159ae90874
bug fix for scrolling of main menu when using SMALL_DISPLAY (2 lines only)
13 years ago