349dafa728
config update (set to -1)
7 years ago
21e60fd3ed
Allow user to control Z-Height correction for off mesh movements ( #9661 )
7 years ago
5d9e16ea49
Update Czech advanced pause
7 years ago
c78e1c0f23
Fix G26 Circles... ( #9641 )
...
* Fix G26 Circles...
7 years ago
b648999528
Merge pull request #9624 from Bob-the-Kuhn/RRD-8-bit-code-to-2.0.x
...
[2.0.x] Add delays to AVR driver for RRD Full Graphic Smart Controller
7 years ago
8db67d1647
Fixed compilation when using avr-gcc
...
- avr-gcc is more strict than the Arduino IDE, it seems.
7 years ago
f05bd7f082
Added files missing from earlier commit.
7 years ago
4880ac6533
Added a light-weight status screen for the ST7920
...
- The status screen uses the ST7920 character generator to greatly
reduce SPI traffic and MCU load when updating the status screen.
- Has been tested with the RepRapDiscount Full Graphics Smart Controller
but should work with any LCD that uses an ST7920 or fully compatible
controller.
7 years ago
3d74ff3c87
Cartesian UBL systems should not use SEGMENT_LEVELED_MOVES
...
There is significant downside to breaking up the long line segments on UBL Cartesian machines. It adds a lot of extra computation but worse... It cuts out all of UBL's off mesh Z-Height correction checks. There have been a large number of people complaining about the nozzle going to infinity or crashing into the bed lately. They are being caused by
```
void unified_bed_leveling::line_to_destination_cartesian()
```
not watching over the segments being queued up for movement.
7 years ago
5dc04c5201
Fix #9361
7 years ago
133b38b93b
Complete M48 description ( #9631 )
7 years ago
93c0198b2d
Init LCD welcome message programmatically
7 years ago
67a4cc610b
French update
...
Based on #9610
7 years ago
e7b50c89b0
Fix #9201
...
FILAMENT_LCD_DISPLAY can work with SDSUPPORT
7 years ago
8d71ad37cb
flush comment to match 1.1.x
7 years ago
272f132b82
Remove stray ` from STM32F1 HAL
...
As noted in #8585
7 years ago
5b70d3da1c
Update DIGIPOT_I2C_MOTOR_CURRENTS comments
7 years ago
2ec65051fd
Fix serial comment sp.
7 years ago
9a423e9a89
tested
7 years ago
d741bcf8a9
Tweak boards spacing
7 years ago
f8912bb19f
French update
...
Based on #9590 by @studiodyne
7 years ago
e6b8207b03
Restore welcome message
7 years ago
89165326b4
Cleanup after vim and vigor
7 years ago
423bf9955e
Set Megatronics baud rate to 115200
...
Fix #9092
7 years ago
377108619b
Fix plan_arc clockwise (G2)
...
Fix #9482
7 years ago
378867d894
Update PB Rev.F pins
7 years ago
8e0c107545
Have Kossel Pro use Z_MIN_PROBE_ENDSTOP ( #9586 )
7 years ago
03d790451f
[2.0.x] HAL timer set/get count => set/get compare ( #9581 )
...
To reduce confusion over the current timer count vs. the compare (aka "top") value. Caution: this re-uses the function name, changing its meaning.
7 years ago
7a4029d1b1
Correct MOTHERBOARD for Geeetech i3 Pro X
7 years ago
451fb16f9b
Fix CYCLES_PER_MICROSECOND conflict
7 years ago
3e384b60ce
Malyan M200 fix E0_AUTO_FAN_PIN ( #9580 )
...
Fixes #8794
7 years ago
33752de12d
Update some outdated configs
7 years ago
38c7d53bf7
Repair some spacing
7 years ago
e3043d7ac7
Fix #8744
7 years ago
d3ddd5ffaa
Merge pull request #9576 from thinkyhead/bf2_more_tests
...
[2.0.x] Fix Power class
7 years ago
7280fa1e31
Patch Power class
7 years ago
4aff6c1c32
Tronxy X5S pins and configuration
7 years ago
05aa75cecf
Melzi boards use melzi pins
7 years ago
5785bbb491
Updated french translation ( #9556 )
7 years ago
299606e4ae
[2.0.x] Memory overflow protection ( #9562 )
7 years ago
5990266724
Init CS pins before loading settings ( #9566 )
7 years ago
d3fdb44ad8
Update TMC section with SW SPI pins ( #9554 )
7 years ago
3168f0e646
Merge pull request #9549 from thinkyhead/bf2_prevent_comments_resetting
...
[2.0.x] Prevent watchdog reset due to many comments
7 years ago
9be6aa3f79
Merge pull request #9544 from thinkyhead/bf2_reliable_probe_heaters_off
...
[2.0.x] More reliable PROBING_HEATERS_OFF with BED_LIMIT_SWITCHING
7 years ago
c0dd9ef9f2
Support for AnyCubic TriGorilla board ( #9551 )
7 years ago
da693a636e
Fix handling of escapes in serial input
7 years ago
cc9cef7f7a
Fix HAS_CONTROLLER_FAN in is_power_needed
7 years ago
112917cfef
No EXTRUDER_RUNOUT_PREVENT during print
7 years ago
c30a8067ab
Prevent watchdog reset due to many comments
...
Addressing #7449
7 years ago
b7053156fe
Minor comment/condition cleanup
7 years ago
f64d300cfd
Sanity check SERIAL_PORT
...
Addressing #7400
7 years ago
5a70887467
Size lcd_status_message based on language ( #9545 )
7 years ago
545cd8fa60
Tweak malyanlcd.cpp
7 years ago
e698998343
More reliable PROBING_HEATERS_OFF with BED_LIMIT_SWITCHING
7 years ago
27faeafc1b
[2.0.x] BIBO Cyclops ( #9541 )
7 years ago
2014d38e10
NEOPIXEL_BRIGHTNESS parity
7 years ago
694d2ebec0
TMC SW SPI pins in Configuration_adv.h
...
Counterpart to #9632
7 years ago
9854262334
[2.0.x] Fix compile warning ( #9539 )
7 years ago
b639f1ad4b
Correct some retract() comments
7 years ago
1541224a81
Enable Z axis and delta sensorless homing ( #9516 )
7 years ago
b2f8b4ada5
I2C position encoders update ( #9533 )
...
Updating I2C position encoders to enable babystepping and Babystep XY when using the ecm microstep correction method. Also changed default method to ECM microstep.
7 years ago
93af0365e8
[2.0.x] Add support for Cohesion3D ReMix and Mini ( #9512 )
...
* Add support for Cohesion3D ReMix and Mini
* Two separate pins files for pedantic reasons
7 years ago
23240f7986
Fix sw serial pins for TMC2208
...
From #9518 by @melvinisken
7 years ago
d42a87cb31
Update language Italian
...
From #9508 by @tnw513
7 years ago
2538f019d0
Update language Basque-Euskera
...
From #9514 by @1138-4EB
7 years ago
d168ee9bed
Drop leveling include from steppers.cpp
7 years ago
09c8807a36
Minor formatting in queue.cpp
7 years ago
704d33c374
Special override of LCD_WIDTH
7 years ago
b3f115fa0a
Marlin.ino needs no content ( #9506 )
7 years ago
ca8fdff1af
Comment G26 properly
7 years ago
8558264514
Configs for Prusa i3 Pro B GT2560 Rev.A Plus ( #9505 )
...
One without probe and one with BLTOUCH.
7 years ago
b5e92f4f90
[2.0.x] Enable / disable PSU automatically ( #9503 )
7 years ago
eecb0188c0
Add ULTI_CONTROLLER to example configs
7 years ago
16739264d3
Add UltiController v2.1 support
...
Add compatibility with the original screen bord from Ultimaker 2 printer (UltiController v2.1 with the PG-2864ALBP I2C display)
7 years ago
a8c4174a13
M100 comment
7 years ago
38d62494ef
Adjustment to DOG_CHAR_*_EDIT
7 years ago
8a6feab1c4
Num-to-string functions for DEBUG_LEVELING_FEATURE
7 years ago
766faa05a9
sp
7 years ago
f27c89980a
[2.0.x] Simplify bltouch configuration ( #9488 )
7 years ago
338dac258b
[2.0.x] Fix compiler error when G26 is enabled ( #9492 )
7 years ago
4ddb6a3a1f
Merge pull request #9470 from thinkyhead/bf2_malyan_clueless
...
[2.0.x] Malyan M200 LCD
7 years ago
03bfc0d7c8
Merge pull request #9439 from thinkyhead/bf2_fix_G26_circle_bumps
...
[2.0.x] Change G26 circle angles
7 years ago
e5ee0b6f6c
Implement MALYAN_LCD
7 years ago
b939a2e88c
Watchdog conditional for LPC
7 years ago
4925f60cff
Add MALYAN_LCD to configs
7 years ago
3a1225e438
Sanity check SENSORLESS_HOMING
7 years ago
2ea4e74ed3
Misc. comments
7 years ago
aecf0c9bb9
Allow override of CS pins generally
7 years ago
0891b58c30
#ifdef tweaks
7 years ago
428f164d02
[2.0.x] Bug fix - "M114 D" and Due (dtostrf C linkage) ( #9481 )
7 years ago
693843f1fa
Allow override of RAMPS CS Pins ( #9472 )
7 years ago
ac6bf7226a
Update of comments in thermistor files. No functional changes. ( #8986 )
7 years ago
da3a0d619c
Add Selena Compact board ( #9407 )
...
5-axis, high performance, powerful board with Smoothieware opensource firmware. Designed for 3D printer, Laser cutter or CNC mill. Five changed independent drivers on board. Two extruders 3d printer support.
7 years ago
786746404b
[2.0.x] Apply feedrate to nozzle movement for kinematic machines ( #8778 )
7 years ago
5364b92c37
Drop obsolete string
7 years ago
34624cf399
[2.0.x] BIBO TouchX configuration ( #9469 )
7 years ago
3d72fe0730
snapshot
7 years ago
33ec599ca0
Tweaky LPC1768 SPI spacing/style
7 years ago
c46de340b7
Clean up trailing whitespace
7 years ago
e1fd9c08b3
[2.0.x] Add support for LPC1769 at 120 MHz ( #9423 )
7 years ago
6ace57e1b0
[2.0.x] remove duplicated include ( #9445 )
...
This was present in #9357 but lost
7 years ago
9e13d1fad5
[2.0.x] Fix temperature out of LCD ( #9461 )
...
Fix bug introduced in #9415
7 years ago
e6cdc438fd
Change G26 circle angles
...
To prevent the nozzle from colliding with the printed pattern.
7 years ago
a8764ac5d5
G26 parity with 1.1.x
7 years ago
374f2a5e16
[2.0.x] Fixed wrong information about TMC2208 wiring ( #9335 )
7 years ago
a0570ff1eb
Fix caselight on Due ( #9364 )
7 years ago
b13099de3f
General cleanup of HAL code
7 years ago
9b9350e010
Fix jerky Z motion between probes
...
Suggested by #9375
7 years ago
d6e29e9597
Update French language
...
Based on #9373 by @nikkoura
7 years ago
e1117a8492
[2.0.x] fix compile errors when CNC_COORDINATE_SYSTEMS is enabled ( #9380 )
7 years ago
ea9ad4e46d
[2.0.x] Fix compile error on delta when NO_WORKSPACE_OFFSETS ( #9388 )
7 years ago
79796b22ad
Fix up _Bootscreen.h and _Statusscreen.h
7 years ago
21179f8300
Fix the "slow" version of the G-code parser
7 years ago
c251601916
Simplified SET_BIT, moved to endstops.cpp
7 years ago
eb18ae9003
Define LSBFIRST / MSBFIRST for LPC
7 years ago
f8227abf1c
Merge pull request #9384 from tcm0116/2.0.x-retract
...
[2.0.x] Clear retracted status when homing the Z axis
7 years ago
ea5f91737f
Merge pull request #9392 from studiodyne/studiodyne-pause
...
[2.0.x] Pause resuming fix
7 years ago
5c69d45f5b
[2.0.x] TMC2130 support for LPC platform ( #9114 )
7 years ago
34160806c0
Fix broken G29 W I J
7 years ago
f5cfdf6efe
Use _BV32 to avoid name conflict
7 years ago
6339b506c0
Make sure binary.h is included as needed
7 years ago
51d080d2c1
Update Pause
7 years ago
7035471982
Clear retracted status when homing the Z axis
7 years ago
6d4bc9a1f8
[2.0.x] Fix SD wrong filename list ( #9342 )
...
If last file in directory has short filename and is preceded by a deleted long file name. SD menu will wrongly report long deleted file name as last entry
7 years ago
c6e01ebd52
never mind ...
7 years ago
ab709ccac1
add USEABLE_HARDWARE_PWM & clear up some compiler warnings
7 years ago
fc5c1a28d8
Fix M118 parameter parsing
7 years ago
399bca316a
Fix has_value with FASTER_GCODE_PARSER
7 years ago
80d3ded895
Change parser codebits from array to int32_t
7 years ago
053b1371c7
Simplify G-code debug option
7 years ago
608f8b10da
Parser val method parity with 1.1.x
7 years ago
2bea1bda56
Move more strings to PROGMEM
7 years ago
58671e1bc1
Marlin must override _BV for 32-bit masks!
7 years ago
45cfb16424
Merge pull request #8355 from tcm0116/2.0.x-TwoWire
...
[2.0.x] Master-only TwoWire (I2C) class for LPC1768
7 years ago
1dcfe193ac
Optimize some serial strings
7 years ago
9644fe1839
Lightly optimize arc length calculation
7 years ago
c9bda932fe
Patch M114 D logical output
7 years ago
e5ca60acf5
Patch G29 no_action for A and Q
7 years ago
696f8eb4c6
Include Z Fade in log_machine_info
7 years ago
3217da6fa5
Followup patch for TMC stepper init
7 years ago
db031d5d76
Add missing SoftwareSerial begin for TMC2208
...
Based on #9299
7 years ago
3db35ba9be
[2.0.x] Fix change filament for delta machines ( #9295 )
7 years ago
2ebf52e57d
Fix Skew Correction pre-calculation overflow error
7 years ago
adb2ac4747
Fix skew settings report precision
7 years ago
205c5fa078
Merge pull request #9277 from oysteinkrog/fix/DualX_Endstops
...
[2.0.x] Fix DUAL_X_CARRIAGE endstop tests
7 years ago
90d011cc48
Use ADD_PORT_ARG for all cases
7 years ago
51c7b5d46f
Fix set_home_offset bug from bad porting
7 years ago
b1cd012aa6
Clean up and document load/unload/pause/resume
7 years ago
266086670b
Better LCD message when heating needed
7 years ago
a718f5bdf3
Don't run `M600` on filament runout if the nozzle is cold
7 years ago
61bf8478a2
Add hotEnough methods
7 years ago
7a52dfad55
Merge pull request #9283 from thinkyhead/bf2_jgaurora_configs
...
[2.0.x] Add JGAurora A5 support
7 years ago
f875f49caa
[2.0.x] LPC1768: Fix: Serial pins disabled correctly when in use ( #9193 )
7 years ago
c63cffca7f
Add example configs for JGAurora A5
7 years ago
7d6c009104
Add thermistor 15 tuned for JGAurora A5
7 years ago
582d073de1
Patch up digital microstepping and SPI CS pins
7 years ago
ab8a1a2a0d
Sync gCreate gMax1.5+ config with 1.1.x
7 years ago
f9dbd4d9f4
Updated FolgerTech i3-2020 config
7 years ago
348b454401
Probe bounds based on bed size
7 years ago
a440522f84
Merge pull request #9284 from Bob-the-Kuhn/DUE-pins-debug
...
[2.0.x] PINS_DEBUGGING maintenance
7 years ago
58ed9901d7
Consistent NEOPIXEL_TYPE options
7 years ago
382a5e3318
Clean up trailing whitespace
7 years ago
441517bbe1
Fix DUAL_X_CARRIAGE endstops
...
\#8170 fixed
7 years ago
b46932f0c0
Merge pull request #9273 from thinkyhead/bf2_creality_tuneup
...
[2.0.x] Fix and improve Creality configs
7 years ago
49bcb5ce2d
Merge pull request #9220 from benlye/lcd-timer
...
[2.0.x] Fix LCD timer string length
7 years ago
07db5638e2
Add a heating indicator X offset
7 years ago
c68ce8667d
Fix and improve Creality configs
7 years ago
8190fdb260
[2.0.x] Option to use Neopixel as case light ( #9270 )
...
* Add option to use Neopixel as case light
* Apply CASE_LIGHT_USE_NEOPIXEL to example configs
7 years ago
9b519864bf
[2.0.x] Relative movements fix ( #9259 )
7 years ago
887664aa61
Restore broken Dual X Carriage
7 years ago
fb044b6a64
Fix HAL_timer_set_current_count for STM32F1
7 years ago
a8638aa20d
Update STM32F1 timer code to use libmaple bb_perip
7 years ago
2e2fd8fd79
Merge pull request #9261 from tcm0116/2.0.x-delta_softstops
...
[2.0.x] Allow DELTA to compile with soft endstops disabled
7 years ago
750cc02b3a
Use delay() in serial temp report
7 years ago
9de8c04945
Allow FIL_RUNOUT_PIN override on RAMPS-based boards
7 years ago
57b61491d3
Set FIL_RUNOUT_PIN for Creality CR10-S
...
Tested with M43 and found to be connected to DIO 2
7 years ago
4a4d832344
Use standard encoder pulses/steps for CR-10S
7 years ago
44239b1062
Allow DELTA to compile with soft endstops disabled
7 years ago
4bc4351250
Date refresh
7 years ago
303d792b9f
Merge pull request #9253 from tcm0116/2.0.x-mks_sbase
...
[2.0.x] Cleanup MKS-SBASE compile warnings
7 years ago
afec16e644
Merge pull request #9240 from tcm0116/2.0.x-eeprom
...
[2.0.x] Follow-on to #9161
7 years ago
f2ea8a0529
Merge pull request #9197 from p3p/pr_bf2_operation_freemem
...
[2.0.x] LPC1768: Free up some RAM
7 years ago
0c176c677e
Merge pull request #9231 from GMagician/2.0.x-ramps-pins-fixup
...
[2.0.x] Expand RAMP case light possibilities
7 years ago
f2d09f27bb
Merge pull request #9246 from GMagician/2.0.x-bed-temp-limit-fix
...
[2.0.x] Standardized max temp values
7 years ago
16eb966ee3
PINS_DEBUGGING cleanup for DUE
7 years ago
63fd23ab1c
Cleanup MKS-SBASE compile warnings
7 years ago
11e68541b0
Merge pull request #9245 from Bob-the-Kuhn/TMC2208-sanity-check-2.0.x
...
[2.0.x] add TMC2208 sanity check to AVR
7 years ago
429e6ba8a6
Fix lcd_preheat dummy variable types
7 years ago
719cd53e09
Standardized max temp values
...
Everywhere in menu items temperatures are "defined value" subtracted by 15.
In one place is subtracted by 5
7 years ago
0ea9cdf4f2
TMC2208 sanity check
7 years ago
7c469c0712
Suggested change to fix Due compile problem
7 years ago
bfd9728cf4
Serial buffer over run work around for v2.0.0 ( #9236 )
...
* Work around for serial buffer over run
PronterFace sends a lot of M105 commands. During long operations such
as UBL's G29 P1, G29 P2, G29 P4 and G26 this can over run the serial
buffer. This results (very often) in a M1 (actually a M1M105) ending
up in the command queue.
Until we figure out a better way to resolve this issue, this will keep
the UBL commands from experiencing bogus commands at thier completion.
7 years ago
c371bdc499
Expand RAMP case light possibilities
...
Pin 6 is only used by servos when 2 or more of them are used
7 years ago
7c18c2ea5f
Fix LCD timer string length
7 years ago
9d0cf02fef
Correct mesh size calculations
7 years ago
c7bad74d8f
Merge pull request #9202 from benlye/m73-bugfix
...
[2.0.x] Fix progress bar duration when time is exactly 86400s
7 years ago
af9b32e3b9
Give PronterFace time to print the UBL What information...
...
Give PronterFace time to print the UBL What information...
7 years ago
acb1e31374
Fix UBL Mesh Size regression
7 years ago
f5f1b069ad
Convert UBL mesh tilting to all use the same algorithm ( #9204 )
...
A number of regressions were patched also. The UBL G29 P2 and P4 Press and Hold had stopped working. It is very possible this is broken in the bugfix_v1.1.x branch also.
The main purpose of the Pull Request is to get the 3-Point mesh tilting to use the LSF algorithm just like the grid based mesh tilt. This simplifies the logic and reduces the code size some what. But the real reason to do it is the 3-Point case can be solved exactly. And by feeding these numbers into the LSF algorithm it provides a way to check all that code for 'correctness'.
7 years ago
554d849827
Fix duration when time is exactly 86400s
7 years ago
6f1bf5d212
LPC1768: Config: default to SDSORT_LIMIT = 64 instead of 256
7 years ago
1e65562d55
LPC1768: HAL: only initialise used HardwareSerial ports
...
Misc formatting
7 years ago
9dacd54a50
Get FT-i3-2020 configuration files into compliance with ?_BED_SIZE
7 years ago
d178d6e921
M503 patch for EEPROM_CHITCHAT off
...
Fix #9155
7 years ago
fa432508b0
Followup to Ender config
7 years ago
6856eccc77
Master-only TwoWire class for LPC1768
7 years ago
d5bf9e74c4
Merge pull request #8996 from p3p/pr_bf2_more_adc_filter
...
[2.0.x] PID control fix and more LPC1768 ADC filtering
7 years ago
4d2f277d43
Merge pull request #9189 from psavva/tmc_debug_compile_fix
...
[2.0.x] Fixes TMC_DEBUG compilation error
7 years ago
43d3d024ac
Update tmc_util.cpp
7 years ago
ad500b01e0
Fixes TMC compilation error
7 years ago
f4e4c7a7c8
Merge pull request #9188 from thinkyhead/bf2_creality_ender
...
[2.0.x] Add Creality Ender config/board
7 years ago
2038722c52
LARGE_FLASH obsolete
7 years ago
f887719a40
Creality Ender board support
7 years ago
9a2dd0bc5a
Creality Ender 2/4 configuration
7 years ago
2c18faf3e4
General cleanups for HAL
7 years ago
42933c804a
Cleanups for STM32F7
7 years ago
a0246c5c96
Add support for STM32F7 MCU
7 years ago
a27fa80a7e
More featureful CR-10S configuration
7 years ago
1a3d2ad275
Merge pull request #9168 from marvin-sinister/rename-M100-2.0.x
...
[2.0.x] Rename M200 pins file to uppercase
7 years ago
a408209d24
More reliable temperature serial report?
7 years ago
5f807e37c5
A second rename saves nine
7 years ago
3ae41e5f7f
Merge pull request #9152 from thinkyhead/bf2_anti_stutter
...
[2.0.x] Ensure smooth printer movements
7 years ago
02ff12d491
More up front option to show SD percentage
7 years ago
3b15c88225
Merge pull request #9153 from thinkyhead/bf2_malyan_support
...
[2.0.x] Fix support for Malyan M150
7 years ago
e753d6298f
FLSUN Kossel example configs
7 years ago
77c2d810f9
Bring configs up to date
7 years ago
3952070800
Link to marlinfw.org boot screen tool
7 years ago
0cd397a3f8
Add instructions for Malyan M150
7 years ago
344ebc3bd2
Create and use pins_MELZI_MALYAN.h for Malyan M150
7 years ago
094e9b1dab
Remove ARDUINO_ARCH_SAM from serial.h too?
7 years ago
c37d38886c
Fix serial.h avr block
...
Followup to #8148
7 years ago
4f5e087ff4
Planner anti-stutter by Sebastian Popp
7 years ago
ac368f2788
Add STEPPER_ISR_ENABLED() to HALs
...
Some also get a `HAL_timer_interrupt_enabled` function.
7 years ago
5578dccaa0
Merge pull request #9161 from tcm0116/2.0.x-eeprom
...
[2.0.x] Fix EEPROM SettingsData for 32-bit architectures
7 years ago
6ba8cf8405
Merge pull request #9163 from GMagician/2.0.x-SD-issues-fix
...
[2.0.x] sd issue fix
7 years ago
50c55b25f7
Renamed to upercase
7 years ago
6667a916a4
Indentation fix
7 years ago
be717b3c07
Save some program memory
...
This will save some program memory with no speed lose
7 years ago
f37c64ee5b
Fix unsupported CMD59
...
It seems that some SD cards don't support CRC_ON_OFF command. This fix will permit to use also these cards but leaving CRC check active on the system
7 years ago
cfd989d7c5
Fix EEPROM SettingsData for 32-bit architectures
7 years ago
da600e5fbe
Merge pull request #9132 from Bob-the-Kuhn/add-VIKI2-to-Travis
...
[2.0.x] add VIKI2 test to Travis & fix LCD contrast (again)
7 years ago
742cff5f3c
Followup to #9141
7 years ago
84de428d30
[2.0.x] Fix compile errors ( #9141 )
...
* Update persistent_store_impl.cpp
* Remove define BYTE from serial functions since Arduino docs typically show 0 for the normal case.
7 years ago
e633ce06c7
LCD contrast type mismatch is back
...
WORKS!
7 years ago
e654ea1e1a
Merge pull request #9130 from thinkyhead/bf2_tmc_followup
...
[2.0.x] More TMC followup
7 years ago
8ac246162e
Creality CR-10S configurations
...
Provided by printedsolid.com
7 years ago
048486390e
Bring some configs up to date
7 years ago
6a043eee55
Various updates for TMC support
7 years ago
d7fd78cb91
Merge pull request #8148 from tcm0116/2.0.x-multi_host
...
[2.0.x] Add multi-host support
7 years ago
a8c446c3bc
[2.0.x]DUE: Fix includes for SDSUPPORT ( #9112 )
7 years ago
Bob-the-Kuhn