2cbdc0ebb6
Fix large Z corrections when nozzle moves off of UBL mesh ( #7415 )
7 years ago
ce65c13a97
Merge pull request #7398 from fiveangle/bf_lcd_bed_level_requirements
...
Clarify LCD_BED_LEVELING requirements
7 years ago
6ef71c3d5f
Merge pull request #7397 from Kaibob2/patch-4
...
Fix for #7395
7 years ago
936dfb965c
Clarify LCD_BED_LEVELING requirements
...
LCD_BED_LEVELING requires PROBE_MANUALLY with auto bed leveling enabled. See #7396
7 years ago
ffe3013bb5
Fix for #7395
...
Filament change causes freeze during paused print. This PR disables Filament change in the prepare menu when a print from SD Card is paused. See #7395
7 years ago
7ef0650504
Merge pull request #7386 from oysteinkrog/fix/DualX
...
Fix DUAL_X_CARRIAGE movement
8 years ago
e948f77cf9
Fix DUAL_X_CARRIAGE not moving at all
...
Axis would only move when homing.
Bug introduced in 91841d75c9Fixes #6956 , fixes #7050 and fixes #7291
8 years ago
08b0456d91
Merge pull request #7379 from thinkyhead/bf_manual_bed_level_floor
...
Manual Bed Leveling: Goto previous Z height at each probe point
8 years ago
850e404838
Merge pull request #7380 from thinkyhead/bf_touchy_probe_delay
...
Implement probing delay for piezo sensors
8 years ago
936d00dda8
Implement probing delay for piezo sensors
8 years ago
29eef360d0
Merge pull request #7308 from thinkyhead/bf_cleanup_config_adv
...
Fixes for FWRETRACT
8 years ago
894608f8a3
Manual Bed Leveling: Goto previous Z height at each probe point
8 years ago
ff06e1a030
Merge pull request #7372 from tcm0116/delta_calib_menu
...
Move Delta Calibration menu to the Prepare menu
8 years ago
15e009b6ca
Move Delta Calibration menu to the Prepare menu
8 years ago
8b0bd44b1e
Merge pull request #7368 from thinkyhead/bf_fix_warnings
...
Patch to fix some compiler warnings
8 years ago
bfd396c13a
Patch to fix some compiler warnings
8 years ago
48c5f3dddf
Tweak kill action #ifdef
8 years ago
be7a9a07c5
Don't reset grid with `G29 Q` + PROBE_MANUALLY
8 years ago
dfe670247d
Merge pull request #7363 from marcio-ao/bugfix-1.1.x
...
Makefile fixes and U8G support.
8 years ago
af83c512b8
Added support for U8G.
8 years ago
4eff18854b
Rename options with swap_ prefix
8 years ago
14482d2f2a
Strip auto-retract for impossible M(IN|AX)_AUTORETRACT combo
8 years ago
9fc72422e4
Don't let the flow multiplier affect retract/recover length
8 years ago
fee696db5d
Improve retract() for G10/G11/autoretract
8 years ago
423b0f3a1e
Replace MIN_RETRACT with MIN_AUTORETRACT, MAX_AUTORETRACT
8 years ago
283d15a8d0
Add a Travis CI test for FWRETRACT
8 years ago
e52c1a0882
Merge pull request #7341 from thinkyhead/bf_bed_size
...
Add X_BED_SIZE, Y_BED_SIZE to configurations
8 years ago
5b69d67da9
Merge pull request #7359 from fiveangle/pio_printrboard_revf
...
Add PIO entry for PRINTRBOARD_REVF
8 years ago
51864fd365
Add bed size as a configuration option
8 years ago
dc7c95e07b
Remove `@ section fwretract`
8 years ago
a972c060d7
Merge pull request #7347 from fiveangle/at90usb_usbcon_unification
...
Remove extraneous USBCON defines for AT90USB boards
8 years ago
42aa10d263
Add PIO entry for PRINTRBOARD_REVF
...
fix from PIO corruption
8 years ago
4718c09c48
Remove extraneous USBCON defines for AT90USB boards
...
USBCON is definied by serial.h pullikng in MarlinConfig.h which in turn pulls in Arduino.h. Defining in later includes has shown to cause compile issues so removing all extraneous calls for and potentially easier future linker troubleshooting.
more USBCON unification
8 years ago
21591352d7
Merge pull request #7340 from thinkyhead/bf_neopixel_rgbw
...
Add support for Printrbot Neopixel RGBW strip.
8 years ago
890e7a16a9
Add support for Printrbot Neopixel RGBW strip.
...
Connected as described at http://printrbot.com/shop/led-strip/
Based on patch by Kelly Anderson <kelly@xilka.com> at
http://www.xilka.com/printrbot/marlin/1.1.4/20170707/
8 years ago
a059e95463
Bring Infitary i3 config up to date
8 years ago
d6d6043548
Merge pull request #7338 from thinkyhead/bf_mks_ps_on_pin
...
MKS 1.3+: Add pin mapping for PS_ON
8 years ago
03989824fa
Merge pull request #7339 from thinkyhead/bf_russian_part_1
...
Update Russian translation - Part 1
8 years ago
851f9f5399
Update Russian translation - Part 1
...
Signed-off-by: Alexey Shvetsov <alexxy@gentoo.org>
8 years ago
b7a16e4468
Merge pull request #7315 from fixoid/patch-1
...
Fixing SWITCHING_EXTRUDER feature to work with HOTENDS > 1
8 years ago
f38b8c5bf8
MKS 1.3+: Add pin mapping for PS_ON
...
This allows the use of D4 as PS_ON since MKS Gen doesn't have a PS_ON pin. However this effectively allows only 3 servos (instead of 4).
Signed-off-by: Alexey Shvetsov <alexxy@gentoo.org>
8 years ago
60cb2bd4e7
Merge pull request #7332 from thinkyhead/bf_before_fwretract
...
Improve FWRETRACT comments
8 years ago
8a3bc6be4d
Improve FWRETRACT config options and commentary
...
Add more details as requested in #7198
8 years ago
b0173ccdb9
Drop extra initializers for vars initialized by EEPROM code
8 years ago
7afafb05b8
Split G10/G11 into separate functions
8 years ago
c45798694f
Add some more requirements to the G-code list
8 years ago
72de280c1e
BARICUDA valve pressure consistently uint8_t
8 years ago
4d98e3f0a7
General cleanup
8 years ago
e530c67349
Fixing SWITCHING_EXTRUDER feature
8 years ago
2ad3ca5d8a
Bugfix ( #7310 )
8 years ago
Roxy-3D