6fb9573157
added support for the reprapworld keypad
12 years ago
594193c908
Merge remote-tracking branch 'upstream/Marlin_v1' into Marlin_v1
12 years ago
1fa61c297e
Turning off Control Panel by Default and Updating the link to the LiquidCrystal_I2C library to avoid confusion.
12 years ago
b27a59f41e
Added support for Elefu RA Board and Elefu Control Panel
12 years ago
a65a26d6b4
If CORE_XY is in use X and Y Axis had to be activated at the same time
12 years ago
db2f157a22
Replace the <= to < in the Command M907, M350 and M351.
...
The for loop for Axis count over the Array.
Add a break after M907
12 years ago
a5cd582665
Support for 10 level deep SD folder hierarchy
12 years ago
fc4ab05157
Solved minor bug in controllerFan()
...
Extruder 2 was checked where extruder 1 should be checked.
12 years ago
0ef54f2f85
Make M303 silent when "S0" is sent
...
If S is left out perhaps it should be silent, but check the spec for
this M code.
12 years ago
a200521eab
Added CUSTOM_MENDEL_NAME option to Configuration.h and language.h
...
Also cosmetic comment changes and spelling corrections in printed
messages
12 years ago
1a397825f9
fix DEFAULT_AXIS_STEPS_PER_UNIT minor Z rounding error
12 years ago
289c02eda4
Remove unnecessary pin initialization in stepper.cpp
...
(duplicates initialization in Marlin_main.cpp)
12 years ago
d5ad7a0814
Rework change to incorporate CONTROLLERFAN
...
Also refactor extruder auto fan logic to simplify further and now only
check every 2.5 seconds
12 years ago
c3cdaceab3
Merge remote-tracking branch 'upstream/Marlin_v1' into Marlin_v1
12 years ago
1c127217df
Make DOGLCD merge neater.
12 years ago
7f57f28ccc
Add lcd_buzz function to ultralcd.h so that non-LCD code can make use of lcd's buzzer.
...
Argument order of lcd_buzz was set to mirror that on tone(). Change
default M300 frequency to something audible.
12 years ago
788d62bcc4
Merge remote-tracking branch 'upstream/Marlin_v1' into Marlin_v1
...
Conflicts:
Marlin/Marlin.pde
Marlin/ultralcd.cpp
Marlin/ultralcd_implementation_hitachi_HD44780.h
12 years ago
d71f1e9bf6
Add (as an option) slower SD transfer mode
12 years ago
db5bb8546d
Merge pull request #452 from MStohn/Marlin_v1
...
128x64 RepRapDiscount Full Graphic Smart Controller support
12 years ago
4b2ece159b
Merge pull request #453 from brackendawson/Marlin_v1
...
Make Gen7 1.4+ heater temp sensort pins match silkscreen.
12 years ago
d5ee2a5a62
Make Gen7 1.4 heater pins match silkscreen
12 years ago
7ac6d7f78e
FIX: Speedup - no explicit display clear needed in u8glib
12 years ago
13596e8722
Added RepRapDiscount FULL GRAPHIC Smart Controller
12 years ago
3a6abe1d6e
Removed STB custom font hack from u8glib library and moved to marlin project
12 years ago
16afbf9bfa
FIX: adopted latest changes from hitachi implementation
12 years ago
34bca48b98
Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1
12 years ago
ac52dcc174
Updated the card menu and watch messages to make it more informative.
12 years ago
31bb3fb297
Fix: Build error when EEPROM_SETTINGS is defined and PIDTEMP is undefined
12 years ago
c80a78bb70
Lower the default max E feedrate a bit. With the stepper fix this is much to high.
12 years ago
5d5909fc25
Fix failure to compile with heated bed: remove call to non-existant scaleBedPID().
12 years ago
93f0463b21
Allow Edit menu to call fn after edit; Fix PID Ki and Kd display in menus; Actually use changed PID and Max Accel values
...
Add new 'callback' edit-menu types that call a function after the edit is done. Use this to display and edit Ki and Kd correctly (removing the scaling first and reapplying it after). Also use it to reset maximum stepwise acceleration rates, after updating mm/s^2 rates via menus. (Previously, changes did nothing to affect planner unless saved back to EEPROM, and the machine reset).
Add calls to updatePID() so that PID loop uses updated values whether set by gcode (it already did this), or by restoring defaults, or loading from EEPROM (it didn't do those last two). Similarly, update the maximum step/s^2 accel rates when the mm/s^2 values are changed - whether by menu edits, restore defaults, or EEPROM read.
Refactor the acceleration rate update logic, and the PID scaling logic, into new functions that can be called from wherever, including the callbacks.
Add menu items to allow the z jerk and e jerk to be viewed/edited in the Control->Motion menu, as per xy jerk.
Conflicts:
Marlin/language.h
12 years ago
4fa2260a59
Fixed cardreader.h to resolve issue #440 (Pull Request #425 missing file)
12 years ago
038d405254
Corrected #endif in language.h
12 years ago
443aaa30bf
Removed GIT fragments
...
Seems that there was something wrong while merging
12 years ago
7f622467fc
Merge pull request #425 from kefir-/m928_logging
...
M928 logging
12 years ago
86867928ac
Merge pull request #434 from DDRBoxman/Marlin_v1
...
Add support for M300: Play beep sound
12 years ago
9a38cad6f0
Merge pull request #430 from STB3/GLCD_128x64_dots
...
Final task of the 128x64dots GLCD implementation
12 years ago
7a5c474d91
Update Configuration.h
12 years ago
4e448b700a
Merged fetched files from Marlin_v1 branch
...
Pull requests: #414 #433 #432 #428
12 years ago
9f2862ce48
Merge pull request #414 from whosawhatsis/Marlin_v1
...
regenerated thermistor table 7
12 years ago
9fb8bd5685
Merge pull request #433 from whosawhatsis/bang-mode
...
Separate PID_MAX from BANG_MAX
12 years ago
0d075378d5
Add LARGE_FLASH define and enable it for some of the beefier boards
...
The LARGE_FLASH flag allows superfluous features to be excluded
on boards with less memory
12 years ago
9a1c90471f
Ignore unused beeper pins
12 years ago
1a0f889803
Add support for M300: Play beep sound
12 years ago
9322c408c6
Updated for LiquidTWI2 library version 1.2.3
...
The new version of the library means that PANELOLU no longer needs to be
defined in LiquidTWI.h (the library file can be used as is) and the new
version of the library also enables the buzzer on the Panucatt VIKI
panel.
12 years ago
fd5b7e0cec
Separate PID_MAX from BANG_MAX
...
This allows PID_FUNCTIONAL_RANGE to use a maximum duty cycle higher
than PID_MAX. This is useful for powerful heaters to heat quickly in
bang-bang mode, but use a lower duty cycle that is easier to stabilize
in PID mode.
12 years ago
e5a853a3d0
Added automated extruder fan function
12 years ago
72419f69a9
Added rumba
12 years ago
91bea43332
Added rumba pinout
12 years ago
d2b00fe486
Removed html and added rumba
...
Found some unwanted html at the bottom of the file which caused it to not be able to compile.
Also added rumba as machine.
12 years ago
6c66cae694
GLCD init screen cosmetics
12 years ago
f3e0e5184d
Add include selector between char. LCD and GLCD
12 years ago
5d3862f9d1
Modified u8glib logo on welcome screen
12 years ago
0b320f75e9
Removed debug code, add some comments
12 years ago
5f1cd70122
Add code to lcd_update() for GLCD
...
This code selects between the routines for the GLCD or the char.
display.
12 years ago
a49c09a776
Add variable for animated fan, add float conversion w/o sign
...
A new variable was introduced to allow fan animation on the GLCD.
Add additional float to string conversion routine without sign
character. This is used for the coordinates visualisation on the GLCD.
12 years ago
26d8863111
Add library selection between GLCD and char. LCD
12 years ago
4a141a694f
Marlin code for GLCD display
...
This contains the menues, status screen etc...
12 years ago
83c790a020
Add bitmap graphics for GLCD
...
1. Marlin welcome screen
2. Status screen symbols 3 Extruders, heated bed, animated fan logo 1
3. Status screen symbols 3 Extruders, heated bed, animated fan logo 2
12 years ago
233df9cca0
Add missing LF at the end of the file
12 years ago
bb0de75a92
Removed umwanted HTML code ath the end of the file
...
Sorry for that. This does not lead to compile errors. I removed the
unwanted code to make it clean.
12 years ago
7c47e7162d
Adding Maker's Tool Works heated bed thermistor
12 years ago
af78d0cbfa
Merge pull request #1 from illuminarti/Fix_E_Speed
...
Fix step rate bug (especially for retraction)
12 years ago
9a78f321a4
Add pins for Motherboard variant 64
...
These definition contain also the definition for the graphics LCD.
12 years ago
5de25ccd20
Add Motherboard variant 64 - STB V1.1
...
Definition for the graphic LCD are already in it, they will not harm the
configuration as they are only defined constants
12 years ago
d6ce63c49c
Merge pull request #411 from STB3/Marlin_w_STB_Board_support
...
Add STB board support to Marlin (next step towards graphic LCD implementation)
12 years ago
f036be7c4e
Clean up tab/whitespace from last commit
12 years ago
07e11c7cf5
Add command M928 to enable logging to file of received gcode commands
12 years ago
92782f9252
Merge pull request #1 from illuminarti/Fix_E_Speed
...
Fix step rate bug (especially for retraction)
12 years ago
6a61a3c0b4
missing comma in last commit
12 years ago
f0aee4101a
regenerated thermistor table 7
...
Generated with createTemperatureLookup.py. The old table crapped out at
270C, which was a problem for polycarbonate.
12 years ago
aba67e2449
No bed config for RAMPS
...
The motherboard 35 is a config without bed with this pins setting :
D8 Extruder
D9 Fan
D10 Controller Fan
12 years ago
6504e96165
Turn off power supply off-load
...
Disable the high current output and wait a little before to turn off,
because the interrupting capacity of the PSU is unknown.
Could be a function if needed by other.
12 years ago
86bf911139
Toggle menu for PSU from LCD pannel
...
From the prepare menu, accessible when is not printing, you have the
possibility to turn off the PSU when is on et vice versa.
From the host, you can turn off or turn on the PSU then the menu is
updated accordingly.
From the LCD message, the printer status is reported ready or off
respectively when the PSU is on or off.
12 years ago
7bad72359c
Support encoder click on PANELOLU2 being read through I2C
...
This change also handles the case where the pause/stop/restart button on
the VIKI is not used. Make LCD I2C buzz sound the same as the normal
buzz (300ms is too long for quick feedback).
12 years ago
1daf2f3256
Number of extruders is not an advanced configuration - it is a basic property.
12 years ago
f1263d3f88
Further reduce code by using precompiler logic
12 years ago
140e095c6e
Add pins for Motherboard variant 64
...
These definition contain also the definition for the graphics LCD.
12 years ago
b2c1c64fb1
Add Motherboard variant 64 - STB V1.1
...
Definition for the graphic LCD are already in it, they will not harm the
configuration as they are only defined constants
12 years ago
ceb5ee38af
Replaced corrupted language.h file on local PC with current from ErikZalm/Marlin
12 years ago
8efd4cfd73
fixed merge conflict
12 years ago
372e12f83f
Implement automatic extruder/cold-end fan control based on temperature
...
This change allows fan outputs to automatically turn on/off when the
associated nozzle temperature of an extruder is above/below a threshold
temperature.
Multiple extruders can be assigned to the same pin in which case the fan
will turn on when any selected extruder is above the threshold.
It also makes the M42 command compatible with the M106/M107 command.
The majority of the logic in this change will be evaluated by the
compiler at build time (i.e, low code space requirements).
12 years ago
6beb42cdf6
Attempt to address Bernhard's comments
...
Refactor configuration to try to make items clearer (what defines a
panel vs what is user changeable).
12 years ago
839bef6d5d
Fix Configuration.h file to not define LCDs be default.
...
Also fix compile time check in Marlin.pde
12 years ago
1292d735ba
Converge all I2C LCD branches (PANELOLU2, VIKI & PCF8575)
...
This includes refactoring the buttons code to remove a large amount of
non-pin dependent duplication from pins.h.
12 years ago
4eb81a69e6
Only compile the new extruder offset code if you have multiple extruders.
12 years ago
3e9cd334a4
Merge pull request #383 from dob71/jeff
...
Hotend offset handling for multi-extruder machines
12 years ago
67710df9f3
Made i2c mode wok with the hardware I am able to test (ywrobot / sainsmart i2c LCD 2004)
...
Removed incorrect LiquidCrystal_I2C Library
12 years ago
b6209c86dd
Added import of Wire Library to make I2C LCD support compilable
12 years ago
2b567d1df5
Added I2C port expander support to HD44780
12 years ago
06272f463d
Added Config variables for activating I2C LCDs and setting type and address
12 years ago
de3dec7215
Also show the tune menu when USB printing.
12 years ago
73d41c10b9
Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into jeff
...
Conflicts:
Marlin/language.h
Marlin/thermistortables.h
12 years ago
63da4dc59a
Merge pull request #398 from DanieleSdei/Marlin_v1
...
Marlin v1, alignment of the Italian language
12 years ago
82e28851bd
Italian language: SD-Card change and SD-Card init
12 years ago
aed5965ad8
Italian language: remove space and some fix
12 years ago
d360846dd4
Update Marlin/language.h
...
Update Polish language #define MSG_RESUMING "Wznawiam drukowanie"
12 years ago
2f60e324dc
Fixed #394
12 years ago
5e2abfcdcd
Merge pull request #391 from STB3/Marlin_with_SD-Card_Change_Menu
...
Add SD-Card change and SD-Card init. for electronics equipped with LCD Display
12 years ago
a0d4e8e78e
Add Messages for SD Card init. & change
12 years ago
bbf0cc1379
Update Marlin/ultralcd_implementation_hitachi_HD44780.h
...
Fix to a bug that I just introduced - sorry. Forgot about offset of string length.
12 years ago
c8f1fbd9d8
Add SD-Card change and SD-Card init.
...
Add SD-Card change and SD-Card init. for reprap electronics without
SD-Chard change detect pin.
12 years ago
71ddb8dc60
Update Marlin/ultralcd_implementation_hitachi_HD44780.h
...
Use all available characters in narrow LCDs < 20 characters.
12 years ago
d2c547c407
Update Marlin/ultralcd_implementation_hitachi_HD44780.h
...
Fix to a minor bug with hardcoded LCD_WIDTH that draws edited values outside of the 16 characters width LCDs.
12 years ago
70871715e4
Added support for extruder offset handling
...
The extruder offset can be specified in the configuration
file or adjusted on the fly using the "M218 T# X# Y#" command.
The EEPROM support is not yet merged in.
The "T#" command can take option "F#" that specifies the feedrate
at which the printing head should be re-positioned. If not
specified the re-positioning move is not preformed immediately,
but the coordinates are adjusted for the printer to properly
position the head when the next movement happens.
12 years ago
49b2ddc8c1
Cleaned up non-standard characters
12 years ago
f8876a7958
Merge pull request #376 from kintel/skip_longfilenames
...
Also skip .files and _files with long filenames. I think its better than before. If somebody dislikes it, or wants additional configuration, it can be done in a future step. Thanks, Marius, and nice to have you helping!
12 years ago
18fcc367d2
Merge pull request #371 from Banjer/Melzi_LED_PIN
...
Chenged LED_PIN for Melzi boards, added comment about broken versions of...
12 years ago
19ce90fe02
Added comment about M42 usage (clean)
12 years ago
00fed0a703
Revert "Extended comment explaining M42 usage"
...
This reverts commit 01541ee64c
12 years ago
e06d820909
Also skip .files and _files with long filenames
12 years ago
01541ee64c
Extended comment explaining M42 usage
12 years ago
f24f02e212
compile fix: quickStop() needs stepper.h
12 years ago
12c41423ad
Fixed typo in comment
12 years ago
0995eaa492
Chenged LED_PIN for Melzi boards, added comment about broken versions of the Sanguino libraries
12 years ago
1d06b10962
Added a feature to have filament change by gcode or display trigger.
...
[default off for now]
syntax: M600 X[pos] Y[pos] Z[relative lift] E[initial retract] L[later retract distance for removal]
if enabled, after a M600, the printer will retract by E, lift by Z, move to XY, retract even more filament.
Oh, and it will display "remove filament" and beep like crazy.
You are then supposed to insert a new filament (other color, e.g.) and click the display to continue.
After having the nozzle cleaned manually, aided by the disabled e-steppers.
After clicking, the printer will then go back the whole shebang, and continue printing with a fancy new color.
12 years ago
408b349a84
Fixed #368 . Commented out the wrong pin definition, but explained why it is there.
12 years ago
9ecb267b63
Merge remote-tracking branch 'upstream/Marlin_v1' into Marlin_v1
12 years ago
3cf59f6f9a
add RepRapPro Huxley thermistor tables
12 years ago
c1730e2b08
Merge pull request #363 from yuroller/sanguino_panelolu
...
Panelolu pin assignment for sanguinololu
12 years ago
86358dd6cd
Panelolu pin assignment for sanguinololu from http://reprap.org/wiki/Panelolu
12 years ago
0f3f5d083d
Minor cleanup of the new FAN_KICKSTART code. #334
12 years ago
6ec56fa923
Merge pull request #334 from KevinOConnor/FanKick
...
Add feature to briefly run the cooling fan at full speed when it first starts.
12 years ago
965baf2683
Merge pull request #362 from daid/Marlin_v1
...
Finnish language
12 years ago
3d91bd486c
Add "kick fan" feature - briefly run fan at full speed on start.
...
Add a feature to run the cooling fan at full speed for a small period
(default 100ms) when first starting the fan. Some fans wont reliably
start spinning at low power, and many fans have issue with the PWM at
low power. However, once the fan starts spinning it can reliably be
set to a wide range of PWM values.
12 years ago
3f2f94ef28
Be consistent in setting of the fan PWM.
...
Always set the FAN PWM value in check_axes_activity() and always use
the value of the active move if a move is active.
12 years ago
7f30039d2a
+ Finnish translation
12 years ago
14e1d495ef
Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1
12 years ago
bbe7d3d0fe
Fixed #312
12 years ago
7ce509b9a7
Merge pull request #361 from yuroller/MakefileSanguino
...
Makefile sanguino
12 years ago
9c34c4f05b
fixes for ramps compilation using installed arduino ide
12 years ago
442ade15a6
Move Gen6 stuff into a proper location.
12 years ago
5fd4582cc8
Merge pull request #242 from Drakelive/Marlin_v1
...
Fixes issues # 216 and # 135 for Gen6 and Gen6 Deluxe board
12 years ago
8b88e3b386
Fixed #345 , Fixed #267 .
12 years ago
27843388c6
Merge pull request #360 from njprossi/Marlin_v1
...
Power signal control definitions for other power supplies
12 years ago
921273baa0
Added optional feature to stop printing when an endstop is hit. Made the Z display on the LCD in 3.2 format instead of 3.1. Added LCD message when and endstop is hit.
12 years ago
7d20ec706e
Added libraries from Arduino 1.0.3 for sanguino build
12 years ago
437eb3bafc
Initialize PS_ON at startup
12 years ago
f3c1fc70a9
Power signal control definitions for ATX and others
12 years ago
dad7691df9
makefile for sanguino standalone compilation
12 years ago
6752cb2d9c
PID now per extruder. Fixed typo
12 years ago
0ac452e252
Disable is now multi extruder compatible. M84 got a T option.
12 years ago
9e7b5056a0
{X,Y,Z}_{MIN,MAX}_POS are actually in Gcode coordinates.
12 years ago
5f82f03ff3
Add italian MSG_RESUMING.
12 years ago
5e3873c8db
Add german MSG_RESUMING.
12 years ago
01aac2a142
Small changes on the LCD panel, let the speed control work better, line up the parameter edit the same as the menu, remove some unused defines, and remove the Z from the 10mm move menu.
12 years ago
b69cb9fbd9
Change the end of SD cart print message from minutes/seconds to hours/minutes.
12 years ago
30254e3388
Merge pull request #350 from jcrocholl/Marlin_v1
...
Automatically set *_MIN_PIN and *_MAX_PIN according to *_HOME_DIR.
12 years ago
38ee395ac7
Replace the 1ms delay for 2 nops to get a 100ns delay. #259
12 years ago
5df5e4c4a2
Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1
12 years ago
a95dcd74e7
Fix some of the duplicated PSTRs, saving 500bytes of flash with LCD on.
12 years ago
8caf5d252d
Remove bogus blank line.
12 years ago
1c2ecddae4
Fix typo (# missing before define).
12 years ago
6dfb8a2187
Fix home_all_axis to make QUICK_HOME work with Repetier-Host which sends G28 X0 Y0 Z0 instead of G28. Thanks to Matt Schoenholz for reporting this issue.
12 years ago
3b2e5027e5
Merged updates from Marlin_v1.
12 years ago
b39f5d614a
For boards with only one endstop per axis, automatically set *_MIN_PIN and *_MAX_PIN according to *_HOME_DIR.
12 years ago
ab09fa4bbf
fixed pwm generation at pin D12 and D13 when one of them is used as FAN_PIN on Sanguino, added soft pwm entry for FAN_PIN in temperature.cpp
12 years ago
5697451c72
fix lcd class
12 years ago
58e806f3fa
Fix the russial translation.
12 years ago
50a5ce1dc4
deduplicate messages
12 years ago
6123a00e64
Fix the german translation.
12 years ago
7c21716886
Fixed #341
12 years ago
ae1bc83350
Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1
12 years ago
596a7e1904
Fix compiling for Arduin < 1.0.0
12 years ago
b264317fa0
Reverted the patch by KevinOConnor, as it crashes some versions of avr-gcc and caused linking issues.
12 years ago
673577a31b
Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1
12 years ago
23022f1a82
Updates to Makefile to compile for Teensy.
12 years ago
96e9db8919
Merge pull request #339 from KevinOConnor/CompilerFlags
...
Add additional optimization flags to Makefile
12 years ago
08356361ac
Fixing a problem with heated beds not working without PID and BED_LIMIT_SWITCHING
12 years ago
047d037f8c
#ifdef fix for #326
12 years ago
0908458381
Use gcc "-fwhole-program" optimization.
...
Use "whole program" and "link time optimization" features of gcc. The
whole-program optimization enables the compiler to evaluate the entire
firmware for optimization instead of just one code file at a time.
This leads to better overall optimizations.
12 years ago
16fbb455ef
Use linker "--relax" option.
...
The "relax" option enables the linker to convert certain "call"
instructions to the smaller "rcall" instruction. This reduces the
size of the resulting binary.
12 years ago
f30b46b2a8
One more fix for #338 , I really should get a heated bed to test with.
12 years ago
65c3f1ffcd
Most likely fixing #338
12 years ago
7577717b59
Fixed #336
12 years ago
1a8f54cea1
The big LCD code update. This splits the display and menu implementation. Paving the way for future different displays. It also makes it easier to modify the menu structures while keeping everything consistant. Note that this most likely breaks the translations, which need to be updated.
12 years ago
6731c094ee
Fix compiling with just an 16x2 LCD and no buttons.
12 years ago
b99a928a80
Fix the M117 (display message on LCD) when used over USB with checksums.
12 years ago
55ba90ac19
Add PID functional range setting. With high powered heaters the current functional range of 10 degrees causes high overshoots as the PID needs to kick in before the temperature hits 10 degrees below target.
12 years ago
5ff5cee8ce
Fix the sensitive pin definitions, there where analogue numbers in the digital pin list. Also made M42 without a P function on the LED_PIN (which was otherwise a useless pin definition)
12 years ago
8b58edc70e
Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1
12 years ago
d0319d45af
Merge pull request #335 from jcrocholl/Marlin_v1
...
Fix endstop pins for Printrboard
12 years ago
ca409e5531
Fix X/Y/Z_MIN_PIN for Printrboard.
12 years ago
1f45cb0a51
Fix typo in MANUAL_HOME_POSITION (plural S missing) and improve comments.
12 years ago
931a0052ea
Fix typo in MANUAL_HOME_POSITION (plural S missing) and reduce BLOCK_BUFFER_SIZE because 64 wasn't working for some reason.
12 years ago
46ec4b648c
Added some missing Mxxx comments to M commands. Fixed the unsetting of the timer dividers for the fast PWM fan.
12 years ago
724f5aa36b
Update on makefile for moved Arduino addons.
12 years ago
6d9dfa96c3
Move the Arduino related stuff out of the Marlin tree, as they are not directly related to Marlin functionality but addons for the Arduino IDE. Also split up the addons for pre 1.0.0 Arduino and post 1.0.0 Arduino.
12 years ago
3fb07d9b8d
Add MINTEMP/MAXTEMP error to LCD, and fix temperature bug with more then 1 extruder.
12 years ago
8e2519e88b
Add realtime delta geometry in Marlin_main.cpp.
12 years ago
cec7283b21
Enable QUICK_HOME for deltabot.
12 years ago
2292441f0c
Use X/Y/Z_MAX_PIN instead of X/Y/Z_MIN_PIN for top endstops on deltabot.
12 years ago
c430906d3b
Deltabot settings and configuration adjustments.
12 years ago
82c8724b33
Fix compile with PID_DEBUG
12 years ago
9b160972a1
Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1
12 years ago
e036750bdf
Use the disable macros on initialization. Which fixes a bug when there is no pin defined for stepper enabled (motherboard 4)
12 years ago
fcd9de72ef
Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1
12 years ago
32d4373e0f
Add printrboard and brainwave to Makefile.
12 years ago
b3ddbcee2a
Merge pull request #329 from jcrocholl/Marlin_v1
...
Add Printrboard and Brainwave to pins.h and fastio.h
12 years ago
29435dfb4b
Proper avr for Sanguino in Makefile.
12 years ago
gregor