434 Commits (03aa424ccb80a4b455066f48f1e08c4ad36a644f)

Author SHA1 Message Date
Scott Lahteine 01d4703429 PREVENT_DANGEROUS_EXTRUDE => PREVENT_COLD_EXTRUSION
Also improve the documentation of this and related options, and set
EXTRUDE_MINTEMP to 170 everywhere.
8 years ago
Scott Lahteine 374f8d2014 dropsegments => MIN_SEGMENTS_FOR_MOVE 8 years ago
Scott Lahteine 99b22d5785 Default AUTO_BED_LEVELING_GRID_POINTS to 3 8 years ago
Scott Lahteine d63b8e2b2b Additional details for I2C_SLAVE_ADDRESS 8 years ago
Scott Lahteine a99ecf71d8 Add support for i2c slave address 8 years ago
Scott Lahteine e113740fa3 Specify that Z_PROBE_*_HEIGHT is nozzle-relative 8 years ago
Scott Lahteine 7e2bd9a233 Z_RAISE_PROBE_* => Z_PROBE_*_HEIGHT 8 years ago
Scott Lahteine 6eed37aafb Merge pull request #4486 from thinkyhead/rc_pid_add_extrusion_rate_off
PID_EXTRUSION_SCALING, disabled by default
8 years ago
Scott Lahteine 63fd1f49a6 PID_EXTRUSION_SCALING, disabled by default 8 years ago
esenapaj 657ef8aded Follow-up the PR #4408 (Add support for reprapworld LCD), etc
・Put #define REPRAPWORLD_GRAPHICAL_LCD into all the example
configuration files
・Adjust spacing
8 years ago
Scott Lahteine 9e21b2e51d Merge pull request #4455 from AnHardt/double-bump-feature
double bump probing as a feature
8 years ago
AnHardt 7188ce0ad6 double bump probing as a feature
Why double touch probing is not a good thing.

It's widely believed we can get better __probing__ results when using a double touch when probing.

Let's compare to double touch __homing__.
Or better let's begin with single touch __homing__.
We home to find out out position, so our position is unknown.
To find the endstop we have to move into the direction of the endstop.
The maximum way we have to move is a bit longer than the axis length.
When we arrive at the endstop - when it triggers, the stepper pulses are stopped immediately.
It's a sudden stop. No smooth deacceleration is possible.
Depending on the speed and the moving mass we lose steps here.
Only if we approached slow enough (below jerk speed?) we will not lose steps.

Moving a complete axis length, that slow, takes for ever.
To speed up homing, we now make the first approach faster, get a guess about our position,
back up a bit and make a second slower approach to get a exact result without losing steps.

What we do in double touch probing is the same. But the difference here is:
a. we already know where we are
b. if the first approach is to fast we will lose steps here to.
But this time there is no second approach to set the position to 0. We are measuring only.
The lost steps are permanent until we home the next time.

So if you experienced permanently rising values in M48 you now know why. (Too fast, suddenly stopped, first approach)

What can we do to improve probing?
We can use the information about our current position.
We can make a really fast, but deaccelerated, move to a place we know it is a bit before the trigger point.
And then move the rest of the way really slow.
8 years ago
Scott Lahteine c31f56a38c Deprecate EXTRUDER_WATTS and BED_WATTS 8 years ago
Scott Lahteine ea5ac94804 Improved MANUAL_[XYZ]_HOME_POS
No need for `MANUAL_HOME_POSITIONS`. Just set each one as-needed to
override the automatic behavior.
8 years ago
Scott Lahteine 8953e3e984 Allow Z_SAFE_HOMING without a probe 8 years ago
Scott Lahteine 24a1a16e5d Move versioning to MarlinConfig.h 8 years ago
Scott Lahteine 277899c175 Move include _Bootscreen.h where needed 8 years ago
Scott Lahteine 83c4653c71 Include boards and macros ahead of configs 8 years ago
Scott Lahteine c6226bb0aa Unify config in a single include without nested includes 8 years ago
Scott Lahteine 2d378fac1b No need to include thermistortables.h in Configuration.h 8 years ago
Scott Lahteine 93ea281061 Split up Conditionals.h into two files
Rather than include twice, which is tricky but may confuse
8 years ago
Scott Lahteine fcc39e2b5f Clean up Transfer Buffer Size comment 8 years ago
Scott Lahteine 8633b644cf Merge pull request #4378 from thinkyhead/rc_debug_leveling_docs
Document DEBUG_LEVELING_FEATURE
8 years ago
Scott Lahteine bb9da6ebdd Document DEBUG_LEVELING_FEATURE 8 years ago
Scott Lahteine 91777dd76c Add DUAL_NOZZLE_DUPLICATION_MODE option 8 years ago
Scott Lahteine 194d9521c3 Merge pull request #4356 from thinkyhead/rc_simpler_run_z_probe
Unify run_z_probe
8 years ago
Scott Lahteine 4a6ed5e221 Use HOMING_FEEDRATE_Z for Z_PROBE_SPEED_FAST 8 years ago
AnHardt 09a3cc33e6 Unify run_z_probe
Unify run_z_probe
Add double touch for DELTAs.
Introduce Z_PROBE_SPEED_FAST and Z_PROBE_SPEED_SLOW
  defaulting to homing_feedrate_mm_m[Z_AXIS] and homing_feedrate_mm_m[Z_AXIS]/2
8 years ago
Scott Lahteine e44b37cdc2 motion section marker below homing speeds 8 years ago
Scott Lahteine 204fd6ec44 Set homing feedrates individually 8 years ago
Scott Lahteine 6abf916575 Reprapworld Keypad move step is 1mm 8 years ago
João Brázio b869fbc05e Update all config files with the new G12 options 8 years ago
Scott Lahteine 81e01152bb Merge pull request #4336 from thinkyhead/rc_bltouch_sensor
BLTouch probe sensor
8 years ago
Scott Lahteine 1583177ef4 BLTOUCH probe config option 8 years ago
Scott Lahteine 39706f3e57 Endstop invert flags as macros instead of const bool 8 years ago
Scott Lahteine 0fcd3706dd Replace ENDSTOPS_ONLY_FOR_HOMING with ENDSTOPS_ALWAYS_ON_DEFAULT 8 years ago
Scott Lahteine 671634bf11 Fix spacing after section header 8 years ago
Scott Lahteine 22b4cff423 New extruder type configuration options 8 years ago
Scott Lahteine bf16ae5a70 Merge pull request #4299 from jbrazio/feature/g27-park-nozzle
Implements park nozzle feature
8 years ago
João Brázio dfa1c45075 Adds a notice to vendors about the SHOW_CUSTOM_BOOTSCREEN directive 8 years ago
João Brázio 9a00108cb6 Adds the WEBSITE_URL as the boot screen line 2 8 years ago
João Brázio 336481ea81 Added G27 configuration options to all configs 8 years ago
João Brázio 68c343a09a Added G12 configuration options to all configs 8 years ago
Scott Lahteine a8b6b6a128 Merge pull request #4252 from thinkyhead/rc_rename_hpb
Replace PLA/ABS preheating with generic
8 years ago
Scott Lahteine 243ad4312a Merge pull request #4271 from thinkyhead/rc_X_DUAL_STEPPER_DRIVERS
X_DUAL_STEPPER_DRIVERS
8 years ago
Scott Lahteine 91bd6eade7 X_DUAL_STEPPER_DRIVERS configuration option 8 years ago
Scott Lahteine 928ff6487a Greek language pack from @psavva 8 years ago
Scott Lahteine 182c8d7f8f Dyze High Temp Thermistor Support 8 years ago
esenapaj 5832f4b848 Follow-up the PR #4253 (Runout Sensor without SD Card, Print Timer support in M104)
・Update forgotten example configuration files
8 years ago
Scott Lahteine 1026e5b071 Replace PLA/ABS preheating with generic 8 years ago
Petr Zahradnik e282d69f63 Print job timer comment changed 8 years ago
AnHardt 4b44a23a36 Add TX-buffer for MarlinSerial
Similar to the current Arduino HardwareSerial
but with max. 256 byte buffer-size.

Deactivated by default.

The boards with AT90USB processor (USBCON) already use a TX-buffer.
8 years ago
AnHardt a129078927 Add an emergency-command parser to MarlinSerial (supporting M108)
Add an emergency-command parser to MarlinSerial's RX interrupt.

The parser tries to find and execute M108,M112,M410 before the commands disappear in the RX-buffer.

To avoid false positives for M117, comments and commands followed by filenames (M23, M28, M30, M32, M33) are filtered.

This enables Marlin to receive and react on the Emergency command at all times - regardless of whether the buffers are full or not. It remains to convince hosts to send the commands. To inform the hosts about the new feature a new entry in the M115-report was made. "`EMERGENCY_CODES:M112,M108,M410;`".

The parser is fast. It only ever needs two switch decisions and one assignment of the new state for every character.

One problem remains. If the host has sent an incomplete line before sending an emergency command the emergency command could be omitted when the parser is in `state_IGNORE`.
In that case the host should send "\ncommand\n"

Also introduces M108 to break the waiting for the heaters in M109, M190 and M303.

Rename `cancel_heatup` to `wait_for_heatup` to better see the purpose.
8 years ago
Petr Zahradnik 43ff0ce35f Rewritten FILAMENT_CHANGE_ENABLE feature 8 years ago
Anthony Birkett 7a377c1d75 Add "About Printer" information menu.
Includes:
  *firmware version / branch / date.
  *extruder count
  *board information (name, serial details, power supply type)
  *thermistors (names, min/max temperatures)
  *printer statistics (PRINTCOUNTER details)

Thanks to @thinkyhead for contributions.
8 years ago
Scott Lahteine f84d85f761 Cleanup extruder runout configs 9 years ago
Scott Lahteine 683975cf90 Fix spelling in a config comment 9 years ago
Scott Lahteine 10da7ac86c Combine Z raise before/after options 9 years ago
Scott Lahteine 03c70c1990 SERVO_DEACTIVATION_DELAY => SERVO_DELAY 9 years ago
Scott Lahteine bd01592816 Goodbye MECHANICAL_PROBE 9 years ago
Scott Lahteine b590a7dee0 Make Z_RAISE_BETWEEN_PROBINGS a more general option 9 years ago
Scott Lahteine d50539583a Make XY_PROBE_SPEED a general probe option 9 years ago
Scott Lahteine 2798499b71 XY_TRAVEL_SPEED => XY_PROBE_SPEED 9 years ago
Scott Lahteine b0e47608e6 Merge pull request #4108 from esenapaj/Fix-for-PR-#4093
Fix for PR #4093 (Make Z Probe options independent of ABL), etc
9 years ago
Scott Lahteine 40cd20a236 Fix comments on EXPERIMENTAL_I2CBUS 9 years ago
esenapaj d583ea852d Standardize format description of Panel 9 years ago
esenapaj aa6d35bd49 Move code block of probe to appropriate position 9 years ago
esenapaj 740fb2ce39 Adjust spacing 9 years ago
Scott Lahteine 19fe93a5a9 Clean up configs for Z_MIN_PROBE_REPEATABILITY_TEST 9 years ago
Scott Lahteine 3996242e9d Allow Z_MIN_PROBE_REPEATABILITY_TEST solo 9 years ago
Scott Lahteine 9beb3f2f5e Merge pull request #4097 from thinkyhead/rc_fil_runout_cleanup
FIL_RUNOUT_INVERTING false by default
9 years ago
Scott Lahteine f215b30932 Merge pull request #4093 from thinkyhead/rc_probe_without_abl
Make Z Probe options independent of ABL
9 years ago
Scott Lahteine dfbf8b3c2c FIL_RUNOUT_INVERTING false by default 9 years ago
Scott Lahteine de12228758 Make Z Probe options independent of ABL 9 years ago
Scott Lahteine f8c278ce4d Cartesio UI display option in all configs 9 years ago
Scott Lahteine bd4ec727e7 Merge pull request #4066 from thinkyhead/rc_M851_with_probe
Make M851 standard with a bed probe
9 years ago
Scott Lahteine eab44b30d4 Safety and serial sections 9 years ago
Scott Lahteine fc56a547d1 Rename movement section to motion 9 years ago
Scott Lahteine 1000563d80 Make M851 standard with a bed probe 9 years ago
Scott Lahteine 47ce810f52 Remove support for XY servo endstops 9 years ago
Scott Lahteine d991a4c24a Merge pull request #4063 from thinkyhead/rc_remove_swp_files
Delete mysterious .swp files from #3609
9 years ago
Scott Lahteine ebbed2975e Delete mysterious .swp files from #3609 9 years ago
Scott Lahteine 02e5dad29a Include Croatian in language listings 9 years ago
Scott Lahteine f639044c24 Merge pull request #3609 from jbrazio/feature/config-version
Adds versioning for Configuration.h & Configuration_adv.h
9 years ago
esenapaj 741cda0e47 Follow-up the PR #3676(Advance extrusion algorithm – LIN_ADVANCE)
・Update forgotten example configurations
9 years ago
João Brázio 8ccd97e7cc
Updated all example configuration files 9 years ago
Reid Rankin 16212432c9 G20/21 and M149 support, and code_value() refactor
This is an update of MarlinDev PR #196.

G20/21: support for switching input units between millimeters and
inches.
M149: support for changing input temperature units.

In support of these changes, code_value() and code_value_short() are
replaced with an array of functions which handle converting to the
proper types and/or units.
9 years ago
Scott Lahteine cd441ce652 SINGLENOZZLE: EXTRUDERS versus HOTENDS 9 years ago
Scott Lahteine db0fd021d0 Z raise options independent of ABL so G28 can use them 9 years ago
Scott Lahteine 28fb1f8994 Tweak #endif comment for ABL GRID 9 years ago
Scott Lahteine a0b000d752 Support for SAV_3DGLCD OLED LCD controller 9 years ago
Edward Patel 06593833ff MBL: Move border macros to Configuration_adv.h 9 years ago
Edward Patel 92a27c37b3 MBL: Apply https://github.com/MarlinFirmware/Marlin/pull/3903 to example_configurations 9 years ago
Scott Lahteine fe3122774a Merge pull request #3806 from thinkyhead/rc_coreyz_support
Support for COREYZ. Fixes for COREXY, COREXZ
9 years ago
Scott Lahteine 89e630b2fb Merge pull request #3808 from thinkyhead/rc_singlenozzle
SINGLENOZZLE
9 years ago
Scott Lahteine 95fee8ca81 Add option for CoreYZ kinematics 9 years ago
Scott Lahteine c5130fd23b Additional instructions for controller reverse options 9 years ago
Scott Lahteine 69abfef82e Add "SINGLENOZZLE" extruder option 9 years ago
Scott Lahteine 1a6c72cb57 Apply to the rest of the configs 9 years ago
Scott Lahteine a469341555 Merge pull request #3800 from jbrazio/feature/move-felix-cfg
Moves Felix's dual configuration to a folder
9 years ago
João Brázio 80f05920c5
Moves Felix's dual configuration to a folder 9 years ago
Scott Lahteine 8218558953 Update comments, rename next_ping_ms, followup to #3797 9 years ago
Scott Lahteine 07c9a11c3c Automatically set X2 stepper pins 9 years ago
Scott Lahteine 3016dfe484 Merge pull request #3744 from thinkyhead/rc_bezier_curves
Add BEZIER_CURVE_SUPPORT — G5 command
9 years ago
esenapaj 6d722716f7 Follow-up the PR #3720 and #3759
Update forgotten Configuration_DUAL.h
9 years ago
João Brázio f9a62f6a8e Added PRINTJOB_TIMER_AUTOSTART section to example config files 9 years ago
Scott Lahteine ddac17a195 Add BEZIER_CURVE_SUPPORT (G5 XYZEFIJPQ) 9 years ago
Scott Lahteine 9f6b8f7d5b Remove extra @section directive from configs 9 years ago
Scott Lahteine f13c4a9ec4 Merge pull request #3720 from jbrazio/feature/host-keepalive
Removes the DISABLE from HOST_KEEPALIVE
9 years ago
AnHardt b74af78736 Make arc support (G2/G3) configurable
Saves about 2669 bytes when deactivated. (About 1% for a AT2560, about __4%__ for a AT644!)
9 years ago
Scott Lahteine 14cd0f4c92 Merge pull request #3740 from thinkyhead/rc_lcd_home_options
Individual Axis Homing LCD menu items
9 years ago
esenapaj 69511b5e5e Follow-up the PR #3719(Harmonize LCD comment section)
It update forgotten Configuration_DUAL.h.
9 years ago
João Brázio 09150cae79 Individual Axis Homing LCD menu items 9 years ago
Scott Lahteine 4dc4e2063f Add REVERSE_ENCODER_DIRECTION option 9 years ago
João Brázio 85b2c80838
Updated example configurations 9 years ago
João Brázio 5373ac6373
Updated example configurations 9 years ago
esenapaj 212b17d510 Fix for PR #3526(Configuration.h LCD & SDCard s...
Fix for PR #3526(Configuration.h LCD & SDCard section rewrite)

It removes duplicated BQ_LCD_SMART_CONTROLLER.
9 years ago
esenapaj 2fa4bc344c Some clean-up for example configuration files
Some clean-up for example configuration files

Follow-up and fix the PR #3253(Make the Autotune item(s) in the LCD menu optional):
・Update forgotten file(Felix/Configuration_DUAL.h)

Follow-up the PR #3526(Configuration.h LCD & SDCard section rewrite):
・Add section of RigidBot Panel to RepRapWorld/Megatronics/Configuration.h

Follow-up the PR #3576(Z Safe Homing for all):
・Adjust spacing

Follow-up and fix the PR #3625(Print job statistics):
・Update forgotten file(Felix/Configuration_DUAL.h)
・Remove ambiguous character "f" in top of RigidBot/Configuration.h
9 years ago
Scott Lahteine fbf69081b4 Updated comment for THERMAL_PROTECTION_BED 9 years ago
gralco 908229dbb3 Introduce temp watch protection for the bed
When setting the bed temp via M140/M190 if the thermistor does not read an increase of WATCH_BED_TEMP_INCREASE degrees by WATCH_BED_TEMP_PERIOD seconds then it will throw "Error:Heating failed, system stopped! Heater_ID: bed" and call the kill() function.

Conflicts:
	Marlin/Configuration_adv.h
9 years ago
Scott Lahteine c3ef9993b9 Merge pull request #3625 from jbrazio/feature/print-counter
Print job statistics
9 years ago
João Brázio e34f4653ef
Fixed a typo on the configuration files 9 years ago
João Brázio 27088e356f
Updated example configuration files 9 years ago
Scott Lahteine 924285afa6 Merge pull request #3641 from thinkyhead/rc_reverse_menu_doc
Correct the REVERSE_MENU_DIRECTION comment
9 years ago
Scott Lahteine f1b00eb12b Correct the REVERSE_MENU_DIRECTION comment 9 years ago
Scott Lahteine 0c11566f42 Replace LANGUAGE_INCLUDE with LCD_LANGUAGE 9 years ago
Scott Lahteine 259794c0be Make DISPLAY_CHARSET_HD44780 a single setting 9 years ago
João Brázio 7de0161204
Updated example config files 9 years ago
Scott Lahteine 0c2aa92b07 Z Safe Homing for all
The `Z_SAFE_HOMING` feature is coupled with probes and not leveling, so
make it available for general use.
9 years ago
Scott Lahteine 339b5b3e34 Patch more configs with new changes 9 years ago
Scott Lahteine a8e4d7c135 Merge pull request #3477 from alephobjects/BedTempHysteresis
Implementation of M190 bed temp hysteresis
9 years ago
Scott Lahteine 1cc622b167 Fix minor spelling in comments 9 years ago
Scott Lahteine de8c0baf8b Update some comments in Configuration.h 9 years ago
gralco 69c00aea4c Include bed hysteresis setting in the example configs 9 years ago
Scott Lahteine f8e10ff1d8 Merge pull request #3491 from thinkyhead/rc_mechanical_probe
Support for "mechanical probe" with Allen Key as a special case
9 years ago
Scott Lahteine 7eb476597f Update some comments in Configuration.h 9 years ago
esenapaj 2eb1b102f8 Support for "mechanical probe" with Allen Key as a special case 9 years ago
Scott Lahteine 50c3140040 Merge pull request #3414 from thinkyhead/rc_host_timeout_mods
Host Keepalive configurable timeout with 2s default
9 years ago
jbrazio dd3a06a95a Implemented M155 and M156, a generic TWI/I2C interface for Marlin 9 years ago
Scott Lahteine 2eca8d63b3 Add DEFAULT_KEEPALIVE_INTERVAL setting 9 years ago
Scott Lahteine 868eebfdee Simplify configuration of Z2 endstops 9 years ago
Scott Lahteine e5771346a4 Drop DISABLE_M(IN|AX)_ENDSTOPS, replace with individual endstop flags 9 years ago
Scott Lahteine ffe054c129 Fix comment about host keepalive interval 9 years ago
Scott Lahteine 1a79b13b7a FILAMENT_SENSOR -> FILAMENT_WIDTH_SENSOR 9 years ago
Scott Lahteine 3b2d159abd Relax the test for "Heating failed" errors 9 years ago
Scott Lahteine 53cc6cca46 Formalize some dependencies on PIDTEMPBED 9 years ago
Scott Lahteine 4b31c67dce Add PID_AUTOTUNE_MENU option 9 years ago
Scott Lahteine e08915a723 Fix comments in Configuration_adv.h 9 years ago
Scott Lahteine 0da744b7b0 Further cleanup of comments, partial Doxygen-style
Following up on #3231
9 years ago
jbrazio 5e5d250832 Added gplv3 header to all Marlin files 9 years ago