Add Support for ADIMLab Granty

5 years ago · f7aac7a5b0
parent de122c9bbe
commit f7aac7a5b0
2 changed files with 137 additions and 160 deletions
--- a/Marlin/src/pins/mega/pins_HJC2560C_REV2.h
+++ b/Marlin/src/pins/mega/pins_HJC2560C_REV2.h
@ -1,9 +1,9 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
- * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
@ -19,29 +19,25 @@
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *
 */
+#pragma once

 /**
 * HJC2560-C Rev2.x pin assignments
 */

-/**
- * Rev 2.x   2 Aug 2018
- */
-
 #ifndef __AVR_ATmega2560__
-  #error "Oops!  Make sure you have 'Arduino Mega 2560' selected from the 'Tools -> Boards' menu."
+  #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
 #endif

-// BOARD Info
-#define DEFAULT_MACHINE_NAME    "HCMaker7"
-#define BOARD_NAME              "HJC2560-C"
-#define BOARD_REV               "Rev: 2.1"        //主板版本：Rev 2.1, Rs=0.05R
-#define R_SENSOR                "R-sensor: R050"             //检测电阻
-
-// FIRMWARE Info
-#define FIRMWARE_NAME           "Marlin 1-1-9"           
-#define FIRMWARE_REV            "Rev: 1.4"        //固件版本：Rev 1.4
+#define DEFAULT_MACHINE_NAME "HCMaker7"
+#define BOARD_INFO_NAME      "HJC2560-C"

+//
+// Servos
+//
+//#ifndef SERVO0_PIN
+//  #define SERVO0_PIN       11
+//#endif

 //
 // Limit Switches
@ -49,7 +45,7 @@
 #define X_STOP_PIN         22
 #define Y_STOP_PIN         26
 #define Z_STOP_PIN         29
-#define EXP_STOP_PIN       28
+//#define EXP_STOP_PIN       28

 //
 // Steppers
@ -81,7 +77,7 @@
 #ifndef MOTOR_CURRENT_PWM_RANGE
  #define MOTOR_CURRENT_PWM_RANGE  2000
 #endif
-#define DEFAULT_PWM_MOTOR_CURRENT  {1300, 1300, 1250}
+#define DEFAULT_PWM_MOTOR_CURRENT  { 1300, 1300, 1250 }

 //
 // Temperature Sensors
@ -97,9 +93,9 @@
 #define HEATER_1_PIN        3
 #define HEATER_BED_PIN      4

-//#ifndef FAN_PIN
-  #define FAN_PIN           7  //默认不使用PWM_FAN冷却喷嘴，如果需要，则取消注释
-//#endif
+#ifndef FAN_PIN
+  #define FAN_PIN           7   //默认不使用PWM_FAN冷却喷嘴，如果需要，则取消注释
+#endif

 //
 // Misc. Functions
@ -107,87 +103,68 @@
 #define SDSS               53
 #define SD_DETECT_PIN      39
 //#define LED_PIN           8
-#define CASE_LIGHT_PIN      8           //8 默认挤出机风扇作为Case LED，如果需要PWM FAN,则需要将FAN_PIN置为7，LED_PIN置为8
+#define CASE_LIGHT_PIN      8           // 8 默认挤出机风扇作为Case LED，如果需要PWM FAN,则需要将FAN_PIN置为7，LED_PIN置为8
+
 //#define SAFETY_TRIGGERED_PIN     28   // PIN to detect the safety circuit has triggered
 //#define MAIN_VOLTAGE_MEASURE_PIN 14   // ANALOG PIN to measure the main voltage, with a 100k - 4k7 resitor divider.

+//
+// M3/M4/M5 - Spindle/Laser Control
+//
+#if ENABLED(SPINDLE_LASER_ENABLE)
+  #define SPINDLE_DIR_PIN           16
+  #define SPINDLE_LASER_ENABLE_PIN  17   // Pin should have a pullup!
+  #define SPINDLE_LASER_PWM_PIN      9   // Hardware PWM
+#endif
+
 //
 // LCD / Controller
 //
-#if ENABLED(ULTRA_LCD)
+#if HAS_SPI_LCD

-  #define BEEPER_PIN 18
+  #define BEEPER_PIN       18

  #if ENABLED(NEWPANEL)

-  	#if ENABLED(HJC_LCD_SMART_CONTROLLER)
-   		 #define LCD_PINS_RS    		20		//LCD_CS
-    	 #define LCD_PINS_ENABLE 		15		//LCD_SDA
-    	 #define LCD_PINS_D4    		14		//LCD_SCK
-		   #define LCD_BACKLIGHT_PIN 	    5    	//LCD_Backlight
-//         #ifndef LCD_CONTRAST_PIN
-//         	#define LCD_CONTRAST_PIN    5    //LCD_Contrast
-//         #endif
-		    // define digital pin 24 for the filament runout sensor. 
-		  #ifndef FIL_RUNOUT_PIN
-		 	  #define FIL_RUNOUT_PIN   	24		//Filament runout 
+    #define LCD_PINS_RS     20   // LCD_CS
+    #define LCD_PINS_ENABLE 15   // LCD_SDA
+    #define LCD_PINS_D4     14   // LCD_SCK
+
+    #if ENABLED(HJC_LCD_SMART_CONTROLLER)
+      #define LCD_BACKLIGHT_PIN  5   // LCD_Backlight
+      //#ifndef LCD_CONTRAST_PIN
+      //  #define LCD_CONTRAST_PIN  5   // LCD_Contrast
+      //#endif
+      #ifndef FIL_RUNOUT_PIN
+        #define FIL_RUNOUT_PIN 24   // Filament runout
      #endif
-	  #else
-    	#define LCD_PINS_RS    			20		//LCD_CS
-   		#define LCD_PINS_ENABLE 		15		//LCD_SDA
-   		#define LCD_PINS_D4    			14		//LCD_SCK
-      #define LCD_PINS_D5    			21		
-   		#define LCD_PINS_D6     		5
-   		#define LCD_PINS_D7     		6
+    #else
+      #define LCD_PINS_D5  21
+      #define LCD_PINS_D6   5
+      #define LCD_PINS_D7   6
    #endif

-   	// buttons are directly attached
-   	#define BTN_EN1 41
-   	#define BTN_EN2 40
-   	#define BTN_ENC 19
-
-    #define SD_DETECT_PIN 		39
+    #define BTN_EN1        41
+    #define BTN_EN2        40
+    #define BTN_ENC        19

-  #else // !NEWPANEL - Old style panel with shift register
+    #define SD_DETECT_PIN  39

-    // buttons are attached to a shift register
-    #define SHIFT_CLK 		  	38
-    #define SHIFT_LD 		    	42
-    #define SHIFT_OUT 		  	40
-    #define SHIFT_EN 		    	17
+  #else

-    #define LCD_PINS_RS 		  16
-    #define LCD_PINS_ENABLE 	5
-    #define LCD_PINS_D4 	  	6
-    #define LCD_PINS_D5 	  	21
-    #define LCD_PINS_D6 	  	20
-    #define LCD_PINS_D7 	  	19
+    // Buttons attached to a shift register
+    #define SHIFT_CLK      38
+    #define SHIFT_LD       42
+    #define SHIFT_OUT      40
+    #define SHIFT_EN       17

-    #define SD_DETECT_PIN      -1
+    #define LCD_PINS_RS    16
+    #define LCD_PINS_ENABLE 5
+    #define LCD_PINS_D4     6
+    #define LCD_PINS_D5    21
+    #define LCD_PINS_D6    20
+    #define LCD_PINS_D7    19

  #endif // !NEWPANEL

-#endif // ULTRA_LCD
-
-
-//
-// M3/M4/M5 - Spindle/Laser Control，默认，主轴/激光器使用独立的PWM引脚(D9)控制
-// 如果使用了PWM_FAN,Case_Light和Spindle/Laser,  并希望Spindle/Laser使用CASE_Light的线，则将
-//SPINDLE_LASER_PWM_PIN 定义为8
-//
-#if ENABLED(SPINDLE_LASER_ENABLE)   // use the LED_PIN for spindle speed control or case light
-//  #undef LED_PIN
-  #define SPINDLE_DIR_PIN           16
-  #define SPINDLE_LASER_ENABLE_PIN  17   // Pin should have a pullup!
-  #define SPINDLE_LASER_PWM_PIN     9   // MUST BE HARDWARE PWM，
-//#else
-//  #undef LED_PIN
-//  #define CASE_LIGHT_PIN            7
-#endif
-
-//
-// Servos
-//
-//#ifndef SERVO0_PIN
-//  #define SERVO0_PIN       11
-//#endif
+#endif // HAS_SPI_LCD