microlab
/
scube
1
1
Fork 0
Code Issues Pull Requests Releases Activity

Add Support for ADIMLab Granty

Browse Source
2.0.x
Scott Lahteine 5 years ago committed by Scott Lahteine
parent de122c9bbe
commit f7aac7a5b0
2 changed files with 137 additions and 160 deletions
Show Stats Download Patch File Download Diff File

147
Marlin/src/pins/mega/pins_HJC2560C_REV2.h
Unescape Escape View File

@ -1,9 +1,9 @@
/** /**
* Marlin 3D Printer Firmware * Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
* *
* Based on Sprinter and grbl. * Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
* *
* This program is free software: you can redistribute it and/or modify * This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by * it under the terms of the GNU General Public License as published by
@ -19,29 +19,25 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
* *
*/ */
#pragma once
/** /**
* HJC2560-C Rev2.x pin assignments * HJC2560-C Rev2.x pin assignments
*/ */
/**
* Rev 2.x 2 Aug 2018
*/
#ifndef __AVR_ATmega2560__ #ifndef __AVR_ATmega2560__
#error "Oops! Make sure you have 'Arduino Mega 2560' selected from the 'Tools -> Boards' menu." #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
#endif #endif
// BOARD Info #define DEFAULT_MACHINE_NAME "HCMaker7"
#define DEFAULT_MACHINE_NAME "HCMaker7" #define BOARD_INFO_NAME "HJC2560-C"
#define BOARD_NAME "HJC2560-C"
#define BOARD_REV "Rev: 2.1" //主板版本：Rev 2.1, Rs=0.05R
#define R_SENSOR "R-sensor: R050" //检测电阻
// FIRMWARE Info
#define FIRMWARE_NAME "Marlin 1-1-9"
#define FIRMWARE_REV "Rev: 1.4" //固件版本：Rev 1.4
//
// Servos
//
//#ifndef SERVO0_PIN
// #define SERVO0_PIN 11
//#endif
// //
// Limit Switches // Limit Switches
@ -49,7 +45,7 @@
#define X_STOP_PIN 22 #define X_STOP_PIN 22
#define Y_STOP_PIN 26 #define Y_STOP_PIN 26
#define Z_STOP_PIN 29 #define Z_STOP_PIN 29
#define EXP_STOP_PIN 28 //#define EXP_STOP_PIN 28
// //
// Steppers // Steppers
@ -81,7 +77,7 @@
#ifndef MOTOR_CURRENT_PWM_RANGE #ifndef MOTOR_CURRENT_PWM_RANGE
#define MOTOR_CURRENT_PWM_RANGE 2000 #define MOTOR_CURRENT_PWM_RANGE 2000
#endif #endif
#define DEFAULT_PWM_MOTOR_CURRENT {1300, 1300, 1250} #define DEFAULT_PWM_MOTOR_CURRENT { 1300, 1300, 1250 }
// //
// Temperature Sensors // Temperature Sensors
@ -97,9 +93,9 @@
#define HEATER_1_PIN 3 #define HEATER_1_PIN 3
#define HEATER_BED_PIN 4 #define HEATER_BED_PIN 4
//#ifndef FAN_PIN #ifndef FAN_PIN
#define FAN_PIN 7 //默认不使用PWM_FAN冷却喷嘴，如果需要，则取消注释 #define FAN_PIN 7 //默认不使用PWM_FAN冷却喷嘴，如果需要，则取消注释
//#endif #endif
// //
// Misc. Functions // Misc. Functions
@ -107,87 +103,68 @@
#define SDSS 53 #define SDSS 53
#define SD_DETECT_PIN 39 #define SD_DETECT_PIN 39
//#define LED_PIN 8 //#define LED_PIN 8
#define CASE_LIGHT_PIN 8 //8 默认挤出机风扇作为Case LED，如果需要PWM FAN,则需要将FAN_PIN置为7，LED_PIN置为8 #define CASE_LIGHT_PIN 8 // 8 默认挤出机风扇作为Case LED，如果需要PWM FAN,则需要将FAN_PIN置为7，LED_PIN置为8
//#define SAFETY_TRIGGERED_PIN 28 // PIN to detect the safety circuit has triggered //#define SAFETY_TRIGGERED_PIN 28 // PIN to detect the safety circuit has triggered
//#define MAIN_VOLTAGE_MEASURE_PIN 14 // ANALOG PIN to measure the main voltage, with a 100k - 4k7 resitor divider. //#define MAIN_VOLTAGE_MEASURE_PIN 14 // ANALOG PIN to measure the main voltage, with a 100k - 4k7 resitor divider.
//
// M3/M4/M5 - Spindle/Laser Control
//
#if ENABLED(SPINDLE_LASER_ENABLE)
#define SPINDLE_DIR_PIN 16
#define SPINDLE_LASER_ENABLE_PIN 17 // Pin should have a pullup!
#define SPINDLE_LASER_PWM_PIN 9 // Hardware PWM
#endif
// //
// LCD / Controller // LCD / Controller
// //
#if ENABLED(ULTRA_LCD) #if HAS_SPI_LCD
#define BEEPER_PIN 18 #define BEEPER_PIN 18
#if ENABLED(NEWPANEL) #if ENABLED(NEWPANEL)
#if ENABLED(HJC_LCD_SMART_CONTROLLER) #define LCD_PINS_RS 20 // LCD_CS
#define LCD_PINS_RS 20 //LCD_CS #define LCD_PINS_ENABLE 15 // LCD_SDA
#define LCD_PINS_ENABLE 15 //LCD_SDA #define LCD_PINS_D4 14 // LCD_SCK
#define LCD_PINS_D4 14 //LCD_SCK
#define LCD_BACKLIGHT_PIN 5 //LCD_Backlight #if ENABLED(HJC_LCD_SMART_CONTROLLER)
// #ifndef LCD_CONTRAST_PIN #define LCD_BACKLIGHT_PIN 5 // LCD_Backlight
// #define LCD_CONTRAST_PIN 5 //LCD_Contrast //#ifndef LCD_CONTRAST_PIN
// #endif // #define LCD_CONTRAST_PIN 5 // LCD_Contrast
// define digital pin 24 for the filament runout sensor. //#endif
#ifndef FIL_RUNOUT_PIN #ifndef FIL_RUNOUT_PIN
#define FIL_RUNOUT_PIN 24 //Filament runout #define FIL_RUNOUT_PIN 24 // Filament runout
#endif #endif
#else #else
#define LCD_PINS_RS 20 //LCD_CS #define LCD_PINS_D5 21
#define LCD_PINS_ENABLE 15 //LCD_SDA #define LCD_PINS_D6 5
#define LCD_PINS_D4 14 //LCD_SCK #define LCD_PINS_D7 6
#define LCD_PINS_D5 21
#define LCD_PINS_D6 5
#define LCD_PINS_D7 6
#endif #endif
// buttons are directly attached #define BTN_EN1 41
#define BTN_EN1 41 #define BTN_EN2 40
#define BTN_EN2 40 #define BTN_ENC 19
#define BTN_ENC 19
#define SD_DETECT_PIN 39
#else // !NEWPANEL - Old style panel with shift register #define SD_DETECT_PIN 39
// buttons are attached to a shift register #else
#define SHIFT_CLK 38
#define SHIFT_LD 42
#define SHIFT_OUT 40
#define SHIFT_EN 17
#define LCD_PINS_RS 16 // Buttons attached to a shift register
#define LCD_PINS_ENABLE 5 #define SHIFT_CLK 38
#define LCD_PINS_D4 6 #define SHIFT_LD 42
#define LCD_PINS_D5 21 #define SHIFT_OUT 40
#define LCD_PINS_D6 20 #define SHIFT_EN 17
#define LCD_PINS_D7 19
#define SD_DETECT_PIN -1 #define LCD_PINS_RS 16
#define LCD_PINS_ENABLE 5
#define LCD_PINS_D4 6
#define LCD_PINS_D5 21
#define LCD_PINS_D6 20
#define LCD_PINS_D7 19
#endif // !NEWPANEL #endif // !NEWPANEL
#endif // ULTRA_LCD #endif // HAS_SPI_LCD
//
// M3/M4/M5 - Spindle/Laser Control，默认，主轴/激光器使用独立的PWM引脚(D9)控制
// 如果使用了PWM_FAN,Case_Light和Spindle/Laser, 并希望Spindle/Laser使用CASE_Light的线，则将
//SPINDLE_LASER_PWM_PIN 定义为8
//
#if ENABLED(SPINDLE_LASER_ENABLE) // use the LED_PIN for spindle speed control or case light
// #undef LED_PIN
#define SPINDLE_DIR_PIN 16
#define SPINDLE_LASER_ENABLE_PIN 17 // Pin should have a pullup!
#define SPINDLE_LASER_PWM_PIN 9 // MUST BE HARDWARE PWM，
//#else
// #undef LED_PIN
// #define CASE_LIGHT_PIN 7
#endif
//
// Servos
//
//#ifndef SERVO0_PIN
// #define SERVO0_PIN 11
//#endif

Write Preview
Loading…
Cancel
Save