Remove some extraneous spaces

8 years ago · f02af83d42
parent 672e45652e
commit f02af83d42
23 changed files with 42 additions and 42 deletions
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@ -848,7 +848,7 @@
   * Increase current every 5s by CURRENT_STEP until stepper temperature prewarn gets triggered,
   * then decrease current by CURRENT_STEP until temperature prewarn is cleared.
   * Adjusting starts from X/Y/Z/E_MAX_CURRENT but will not increase over AUTO_ADJUST_MAX
-   */ 
+   */
  //#define AUTOMATIC_CURRENT_CONTROL
  #define CURRENT_STEP          50  // [mA]
  #define AUTO_ADJUST_MAX     1300  // [mA], 1300mA_rms = 1840mA_peak
@ -1063,7 +1063,7 @@
 * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
 *
 * M200 D0 to disable, M200 Dn to set a new diameter.
- */ 
+ */
 //#define VOLUMETRIC_DEFAULT_ON

 /**
--- a/Marlin/Makefile
+++ b/Marlin/Makefile
@ -45,7 +45,7 @@
 #
 #   make ARDUINO_VERSION=10609 AVR_TOOLS_PATH=/root/arduino/hardware/tools/avr/bin/ \
 #   HARDWARE_MOTHERBOARD=33 ARDUINO_INSTALL_DIR=/root/arduino upload
-# 
+#
 # If uploading doesn't work try adding the parameter "AVRDUDE_PROGRAMMER=wiring" or
 # start upload manually (using stk500) like so:
 #
@ -69,7 +69,7 @@ AVR_TOOLS_PATH ?=
 #Programmer configuration
 UPLOAD_RATE        ?= 57600
 AVRDUDE_PROGRAMMER ?= arduino
-# on most linuxes this will be /dev/ttyACM0 or /dev/ttyACM1 
+# on most linuxes this will be /dev/ttyACM0 or /dev/ttyACM1
 UPLOAD_PORT        ?= /dev/ttyUSB0

 #Directory used to build files in, contains all the build files, from object files to the final hex file
--- a/Marlin/example_configurations/Cartesio/Configuration_adv.h
+++ b/Marlin/example_configurations/Cartesio/Configuration_adv.h
@ -845,7 +845,7 @@
   * Increase current every 5s by CURRENT_STEP until stepper temperature prewarn gets triggered,
   * then decrease current by CURRENT_STEP until temperature prewarn is cleared.
   * Adjusting starts from X/Y/Z/E_MAX_CURRENT but will not increase over AUTO_ADJUST_MAX
-   */ 
+   */
  //#define AUTOMATIC_CURRENT_CONTROL
  #define CURRENT_STEP          50  // [mA]
  #define AUTO_ADJUST_MAX     1300  // [mA], 1300mA_rms = 1840mA_peak
@ -1060,7 +1060,7 @@
 * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
 *
 * M200 D0 to disable, M200 Dn to set a new diameter.
- */ 
+ */
 //#define VOLUMETRIC_DEFAULT_ON

 /**
--- a/Marlin/example_configurations/Felix/Configuration_adv.h
+++ b/Marlin/example_configurations/Felix/Configuration_adv.h
@ -845,7 +845,7 @@
   * Increase current every 5s by CURRENT_STEP until stepper temperature prewarn gets triggered,
   * then decrease current by CURRENT_STEP until temperature prewarn is cleared.
   * Adjusting starts from X/Y/Z/E_MAX_CURRENT but will not increase over AUTO_ADJUST_MAX
-   */ 
+   */
  //#define AUTOMATIC_CURRENT_CONTROL
  #define CURRENT_STEP          50  // [mA]
  #define AUTO_ADJUST_MAX     1300  // [mA], 1300mA_rms = 1840mA_peak
@ -1060,7 +1060,7 @@
 * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
 *
 * M200 D0 to disable, M200 Dn to set a new diameter.
- */ 
+ */
 //#define VOLUMETRIC_DEFAULT_ON

 /**
--- a/Marlin/example_configurations/Hephestos/Configuration_adv.h
+++ b/Marlin/example_configurations/Hephestos/Configuration_adv.h
@ -845,7 +845,7 @@
   * Increase current every 5s by CURRENT_STEP until stepper temperature prewarn gets triggered,
   * then decrease current by CURRENT_STEP until temperature prewarn is cleared.
   * Adjusting starts from X/Y/Z/E_MAX_CURRENT but will not increase over AUTO_ADJUST_MAX
-   */ 
+   */
  //#define AUTOMATIC_CURRENT_CONTROL
  #define CURRENT_STEP          50  // [mA]
  #define AUTO_ADJUST_MAX     1300  // [mA], 1300mA_rms = 1840mA_peak
@ -1060,7 +1060,7 @@
 * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
 *
 * M200 D0 to disable, M200 Dn to set a new diameter.
- */ 
+ */
 //#define VOLUMETRIC_DEFAULT_ON

 /**
--- a/Marlin/example_configurations/Hephestos_2/Configuration_adv.h
+++ b/Marlin/example_configurations/Hephestos_2/Configuration_adv.h
@ -828,7 +828,7 @@
   * Increase current every 5s by CURRENT_STEP until stepper temperature prewarn gets triggered,
   * then decrease current by CURRENT_STEP until temperature prewarn is cleared.
   * Adjusting starts from X/Y/Z/E_MAX_CURRENT but will not increase over AUTO_ADJUST_MAX
-   */ 
+   */
  //#define AUTOMATIC_CURRENT_CONTROL
  #define CURRENT_STEP          50  // [mA]
  #define AUTO_ADJUST_MAX     1300  // [mA], 1300mA_rms = 1840mA_peak
@ -1043,7 +1043,7 @@
 * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
 *
 * M200 D0 to disable, M200 Dn to set a new diameter.
- */ 
+ */
 //#define VOLUMETRIC_DEFAULT_ON

 /**
--- a/Marlin/example_configurations/K8200/Configuration_adv.h
+++ b/Marlin/example_configurations/K8200/Configuration_adv.h
@ -858,7 +858,7 @@
   * Increase current every 5s by CURRENT_STEP until stepper temperature prewarn gets triggered,
   * then decrease current by CURRENT_STEP until temperature prewarn is cleared.
   * Adjusting starts from X/Y/Z/E_MAX_CURRENT but will not increase over AUTO_ADJUST_MAX
-   */ 
+   */
  //#define AUTOMATIC_CURRENT_CONTROL
  #define CURRENT_STEP          50  // [mA]
  #define AUTO_ADJUST_MAX     1300  // [mA], 1300mA_rms = 1840mA_peak
@ -1073,7 +1073,7 @@
 * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
 *
 * M200 D0 to disable, M200 Dn to set a new diameter.
- */ 
+ */
 //#define VOLUMETRIC_DEFAULT_ON

 /**
--- a/Marlin/example_configurations/K8400/Configuration_adv.h
+++ b/Marlin/example_configurations/K8400/Configuration_adv.h
@ -845,7 +845,7 @@
   * Increase current every 5s by CURRENT_STEP until stepper temperature prewarn gets triggered,
   * then decrease current by CURRENT_STEP until temperature prewarn is cleared.
   * Adjusting starts from X/Y/Z/E_MAX_CURRENT but will not increase over AUTO_ADJUST_MAX
-   */ 
+   */
  //#define AUTOMATIC_CURRENT_CONTROL
  #define CURRENT_STEP          50  // [mA]
  #define AUTO_ADJUST_MAX     1300  // [mA], 1300mA_rms = 1840mA_peak
@ -1060,7 +1060,7 @@
 * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
 *
 * M200 D0 to disable, M200 Dn to set a new diameter.
- */ 
+ */
 //#define VOLUMETRIC_DEFAULT_ON

 /**
--- a/Marlin/example_configurations/RigidBot/Configuration_adv.h
+++ b/Marlin/example_configurations/RigidBot/Configuration_adv.h
@ -845,7 +845,7 @@
   * Increase current every 5s by CURRENT_STEP until stepper temperature prewarn gets triggered,
   * then decrease current by CURRENT_STEP until temperature prewarn is cleared.
   * Adjusting starts from X/Y/Z/E_MAX_CURRENT but will not increase over AUTO_ADJUST_MAX
-   */ 
+   */
  //#define AUTOMATIC_CURRENT_CONTROL
  #define CURRENT_STEP          50  // [mA]
  #define AUTO_ADJUST_MAX     1300  // [mA], 1300mA_rms = 1840mA_peak
@ -1060,7 +1060,7 @@
 * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
 *
 * M200 D0 to disable, M200 Dn to set a new diameter.
- */ 
+ */
 //#define VOLUMETRIC_DEFAULT_ON

 /**
--- a/Marlin/example_configurations/SCARA/Configuration_adv.h
+++ b/Marlin/example_configurations/SCARA/Configuration_adv.h
@ -845,7 +845,7 @@
   * Increase current every 5s by CURRENT_STEP until stepper temperature prewarn gets triggered,
   * then decrease current by CURRENT_STEP until temperature prewarn is cleared.
   * Adjusting starts from X/Y/Z/E_MAX_CURRENT but will not increase over AUTO_ADJUST_MAX
-   */ 
+   */
  //#define AUTOMATIC_CURRENT_CONTROL
  #define CURRENT_STEP          50  // [mA]
  #define AUTO_ADJUST_MAX     1300  // [mA], 1300mA_rms = 1840mA_peak
@ -1060,7 +1060,7 @@
 * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
 *
 * M200 D0 to disable, M200 Dn to set a new diameter.
- */ 
+ */
 //#define VOLUMETRIC_DEFAULT_ON

 /**
--- a/Marlin/example_configurations/TAZ4/Configuration_adv.h
+++ b/Marlin/example_configurations/TAZ4/Configuration_adv.h
@ -853,7 +853,7 @@
   * Increase current every 5s by CURRENT_STEP until stepper temperature prewarn gets triggered,
   * then decrease current by CURRENT_STEP until temperature prewarn is cleared.
   * Adjusting starts from X/Y/Z/E_MAX_CURRENT but will not increase over AUTO_ADJUST_MAX
-   */ 
+   */
  //#define AUTOMATIC_CURRENT_CONTROL
  #define CURRENT_STEP          50  // [mA]
  #define AUTO_ADJUST_MAX     1300  // [mA], 1300mA_rms = 1840mA_peak
@ -1068,7 +1068,7 @@
 * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
 *
 * M200 D0 to disable, M200 Dn to set a new diameter.
- */ 
+ */
 //#define VOLUMETRIC_DEFAULT_ON

 /**
--- a/Marlin/example_configurations/WITBOX/Configuration_adv.h
+++ b/Marlin/example_configurations/WITBOX/Configuration_adv.h
@ -845,7 +845,7 @@
   * Increase current every 5s by CURRENT_STEP until stepper temperature prewarn gets triggered,
   * then decrease current by CURRENT_STEP until temperature prewarn is cleared.
   * Adjusting starts from X/Y/Z/E_MAX_CURRENT but will not increase over AUTO_ADJUST_MAX
-   */ 
+   */
  //#define AUTOMATIC_CURRENT_CONTROL
  #define CURRENT_STEP          50  // [mA]
  #define AUTO_ADJUST_MAX     1300  // [mA], 1300mA_rms = 1840mA_peak
@ -1060,7 +1060,7 @@
 * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
 *
 * M200 D0 to disable, M200 Dn to set a new diameter.
- */ 
+ */
 //#define VOLUMETRIC_DEFAULT_ON

 /**
--- a/Marlin/example_configurations/delta/flsun_kossel_mini/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/flsun_kossel_mini/Configuration_adv.h
@ -850,7 +850,7 @@
   * Increase current every 5s by CURRENT_STEP until stepper temperature prewarn gets triggered,
   * then decrease current by CURRENT_STEP until temperature prewarn is cleared.
   * Adjusting starts from X/Y/Z/E_MAX_CURRENT but will not increase over AUTO_ADJUST_MAX
-   */ 
+   */
  //#define AUTOMATIC_CURRENT_CONTROL
  #define CURRENT_STEP          50  // [mA]
  #define AUTO_ADJUST_MAX     1300  // [mA], 1300mA_rms = 1840mA_peak
@ -1065,7 +1065,7 @@
 * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
 *
 * M200 D0 to disable, M200 Dn to set a new diameter.
- */ 
+ */
 //#define VOLUMETRIC_DEFAULT_ON

 /**
--- a/Marlin/example_configurations/delta/generic/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/generic/Configuration_adv.h
@ -847,7 +847,7 @@
   * Increase current every 5s by CURRENT_STEP until stepper temperature prewarn gets triggered,
   * then decrease current by CURRENT_STEP until temperature prewarn is cleared.
   * Adjusting starts from X/Y/Z/E_MAX_CURRENT but will not increase over AUTO_ADJUST_MAX
-   */ 
+   */
  //#define AUTOMATIC_CURRENT_CONTROL
  #define CURRENT_STEP          50  // [mA]
  #define AUTO_ADJUST_MAX     1300  // [mA], 1300mA_rms = 1840mA_peak
@ -1062,7 +1062,7 @@
 * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
 *
 * M200 D0 to disable, M200 Dn to set a new diameter.
- */ 
+ */
 //#define VOLUMETRIC_DEFAULT_ON

 /**
--- a/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
@ -847,7 +847,7 @@
   * Increase current every 5s by CURRENT_STEP until stepper temperature prewarn gets triggered,
   * then decrease current by CURRENT_STEP until temperature prewarn is cleared.
   * Adjusting starts from X/Y/Z/E_MAX_CURRENT but will not increase over AUTO_ADJUST_MAX
-   */ 
+   */
  //#define AUTOMATIC_CURRENT_CONTROL
  #define CURRENT_STEP          50  // [mA]
  #define AUTO_ADJUST_MAX     1300  // [mA], 1300mA_rms = 1840mA_peak
@ -1062,7 +1062,7 @@
 * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
 *
 * M200 D0 to disable, M200 Dn to set a new diameter.
- */ 
+ */
 //#define VOLUMETRIC_DEFAULT_ON

 /**
--- a/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
@ -852,7 +852,7 @@
   * Increase current every 5s by CURRENT_STEP until stepper temperature prewarn gets triggered,
   * then decrease current by CURRENT_STEP until temperature prewarn is cleared.
   * Adjusting starts from X/Y/Z/E_MAX_CURRENT but will not increase over AUTO_ADJUST_MAX
-   */ 
+   */
  //#define AUTOMATIC_CURRENT_CONTROL
  #define CURRENT_STEP          50  // [mA]
  #define AUTO_ADJUST_MAX     1300  // [mA], 1300mA_rms = 1840mA_peak
@ -1067,7 +1067,7 @@
 * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
 *
 * M200 D0 to disable, M200 Dn to set a new diameter.
- */ 
+ */
 //#define VOLUMETRIC_DEFAULT_ON

 /**
--- a/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
@ -847,7 +847,7 @@
   * Increase current every 5s by CURRENT_STEP until stepper temperature prewarn gets triggered,
   * then decrease current by CURRENT_STEP until temperature prewarn is cleared.
   * Adjusting starts from X/Y/Z/E_MAX_CURRENT but will not increase over AUTO_ADJUST_MAX
-   */ 
+   */
  //#define AUTOMATIC_CURRENT_CONTROL
  #define CURRENT_STEP          50  // [mA]
  #define AUTO_ADJUST_MAX     1300  // [mA], 1300mA_rms = 1840mA_peak
@ -1062,7 +1062,7 @@
 * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
 *
 * M200 D0 to disable, M200 Dn to set a new diameter.
- */ 
+ */
 //#define VOLUMETRIC_DEFAULT_ON

 /**
--- a/Marlin/example_configurations/makibox/Configuration_adv.h
+++ b/Marlin/example_configurations/makibox/Configuration_adv.h
@ -845,7 +845,7 @@
   * Increase current every 5s by CURRENT_STEP until stepper temperature prewarn gets triggered,
   * then decrease current by CURRENT_STEP until temperature prewarn is cleared.
   * Adjusting starts from X/Y/Z/E_MAX_CURRENT but will not increase over AUTO_ADJUST_MAX
-   */ 
+   */
  //#define AUTOMATIC_CURRENT_CONTROL
  #define CURRENT_STEP          50  // [mA]
  #define AUTO_ADJUST_MAX     1300  // [mA], 1300mA_rms = 1840mA_peak
@ -1060,7 +1060,7 @@
 * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
 *
 * M200 D0 to disable, M200 Dn to set a new diameter.
- */ 
+ */
 //#define VOLUMETRIC_DEFAULT_ON

 /**
--- a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
+++ b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
@ -845,7 +845,7 @@
   * Increase current every 5s by CURRENT_STEP until stepper temperature prewarn gets triggered,
   * then decrease current by CURRENT_STEP until temperature prewarn is cleared.
   * Adjusting starts from X/Y/Z/E_MAX_CURRENT but will not increase over AUTO_ADJUST_MAX
-   */ 
+   */
  //#define AUTOMATIC_CURRENT_CONTROL
  #define CURRENT_STEP          50  // [mA]
  #define AUTO_ADJUST_MAX     1300  // [mA], 1300mA_rms = 1840mA_peak
@ -1060,7 +1060,7 @@
 * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
 *
 * M200 D0 to disable, M200 Dn to set a new diameter.
- */ 
+ */
 //#define VOLUMETRIC_DEFAULT_ON

 /**
--- a/Marlin/pinsDebug_Teensyduino.h
+++ b/Marlin/pinsDebug_Teensyduino.h
@ -19,7 +19,7 @@
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *
 */
- 
+
 //
 //  some of the pin mapping functions of the Teensduino extension to the Arduino IDE
 //  do not function the same as the other Arduino extensions
--- a/Marlin/stepper_dac.cpp
+++ b/Marlin/stepper_dac.cpp
@ -64,7 +64,7 @@

    mcp4728_setVref_all(DAC_STEPPER_VREF);
    mcp4728_setGain_all(DAC_STEPPER_GAIN);
-    
+
    if (mcp4728_getDrvPct(0) < 1 || mcp4728_getDrvPct(1) < 1 || mcp4728_getDrvPct(2) < 1 || mcp4728_getDrvPct(3) < 1 ) {
      mcp4728_setDrvPct(dac_channel_pct);
      mcp4728_eepromWrite();
--- a/Marlin/temperature.cpp
+++ b/Marlin/temperature.cpp
@ -1491,7 +1491,7 @@ void Temperature::isr() {
  // at the end of its run, potentially causing re-entry. This flag prevents it.
  if (in_temp_isr) return;
  in_temp_isr = true;
-  
+
  // Allow UART and stepper ISRs
  CBI(TIMSK0, OCIE0B); //Disable Temperature ISR
  sei();
--- a/Marlin/ultralcd.cpp
+++ b/Marlin/ultralcd.cpp
@ -428,7 +428,7 @@ uint16_t max_display_update_time = 0;
        }
        else if (screen == lcd_status_screen && currentScreen == lcd_main_menu && PENDING(millis(), doubleclick_expire_ms))
          screen = lcd_babystep_z;
-      #endif 
+      #endif

      currentScreen = screen;
      encoderPosition = encoder;