diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h
index 475a08138..cd842f502 100644
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@@ -848,7 +848,7 @@
    * Increase current every 5s by CURRENT_STEP until stepper temperature prewarn gets triggered,
    * then decrease current by CURRENT_STEP until temperature prewarn is cleared.
    * Adjusting starts from X/Y/Z/E_MAX_CURRENT but will not increase over AUTO_ADJUST_MAX
-   */ 
+   */
   //#define AUTOMATIC_CURRENT_CONTROL
   #define CURRENT_STEP          50  // [mA]
   #define AUTO_ADJUST_MAX     1300  // [mA], 1300mA_rms = 1840mA_peak
@@ -1063,7 +1063,7 @@
  * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
  *
  * M200 D0 to disable, M200 Dn to set a new diameter.
- */ 
+ */
 //#define VOLUMETRIC_DEFAULT_ON
 
 /**
diff --git a/Marlin/Makefile b/Marlin/Makefile
index 81eeceada..dffc21f7f 100644
--- a/Marlin/Makefile
+++ b/Marlin/Makefile
@@ -45,7 +45,7 @@
 #
 #   make ARDUINO_VERSION=10609 AVR_TOOLS_PATH=/root/arduino/hardware/tools/avr/bin/ \
 #   HARDWARE_MOTHERBOARD=33 ARDUINO_INSTALL_DIR=/root/arduino upload
-# 
+#
 # If uploading doesn't work try adding the parameter "AVRDUDE_PROGRAMMER=wiring" or
 # start upload manually (using stk500) like so:
 #
@@ -69,7 +69,7 @@ AVR_TOOLS_PATH ?=
 #Programmer configuration
 UPLOAD_RATE        ?= 57600
 AVRDUDE_PROGRAMMER ?= arduino
-# on most linuxes this will be /dev/ttyACM0 or /dev/ttyACM1 
+# on most linuxes this will be /dev/ttyACM0 or /dev/ttyACM1
 UPLOAD_PORT        ?= /dev/ttyUSB0
 
 #Directory used to build files in, contains all the build files, from object files to the final hex file
diff --git a/Marlin/example_configurations/Cartesio/Configuration_adv.h b/Marlin/example_configurations/Cartesio/Configuration_adv.h
index 8d10a0539..5d8b55f49 100644
--- a/Marlin/example_configurations/Cartesio/Configuration_adv.h
+++ b/Marlin/example_configurations/Cartesio/Configuration_adv.h
@@ -845,7 +845,7 @@
    * Increase current every 5s by CURRENT_STEP until stepper temperature prewarn gets triggered,
    * then decrease current by CURRENT_STEP until temperature prewarn is cleared.
    * Adjusting starts from X/Y/Z/E_MAX_CURRENT but will not increase over AUTO_ADJUST_MAX
-   */ 
+   */
   //#define AUTOMATIC_CURRENT_CONTROL
   #define CURRENT_STEP          50  // [mA]
   #define AUTO_ADJUST_MAX     1300  // [mA], 1300mA_rms = 1840mA_peak
@@ -1060,7 +1060,7 @@
  * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
  *
  * M200 D0 to disable, M200 Dn to set a new diameter.
- */ 
+ */
 //#define VOLUMETRIC_DEFAULT_ON
 
 /**
diff --git a/Marlin/example_configurations/Felix/Configuration_adv.h b/Marlin/example_configurations/Felix/Configuration_adv.h
index 6ce93616f..27116092d 100644
--- a/Marlin/example_configurations/Felix/Configuration_adv.h
+++ b/Marlin/example_configurations/Felix/Configuration_adv.h
@@ -845,7 +845,7 @@
    * Increase current every 5s by CURRENT_STEP until stepper temperature prewarn gets triggered,
    * then decrease current by CURRENT_STEP until temperature prewarn is cleared.
    * Adjusting starts from X/Y/Z/E_MAX_CURRENT but will not increase over AUTO_ADJUST_MAX
-   */ 
+   */
   //#define AUTOMATIC_CURRENT_CONTROL
   #define CURRENT_STEP          50  // [mA]
   #define AUTO_ADJUST_MAX     1300  // [mA], 1300mA_rms = 1840mA_peak
@@ -1060,7 +1060,7 @@
  * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
  *
  * M200 D0 to disable, M200 Dn to set a new diameter.
- */ 
+ */
 //#define VOLUMETRIC_DEFAULT_ON
 
 /**
diff --git a/Marlin/example_configurations/Hephestos/Configuration_adv.h b/Marlin/example_configurations/Hephestos/Configuration_adv.h
index dc40f3dee..b5e1d2832 100644
--- a/Marlin/example_configurations/Hephestos/Configuration_adv.h
+++ b/Marlin/example_configurations/Hephestos/Configuration_adv.h
@@ -845,7 +845,7 @@
    * Increase current every 5s by CURRENT_STEP until stepper temperature prewarn gets triggered,
    * then decrease current by CURRENT_STEP until temperature prewarn is cleared.
    * Adjusting starts from X/Y/Z/E_MAX_CURRENT but will not increase over AUTO_ADJUST_MAX
-   */ 
+   */
   //#define AUTOMATIC_CURRENT_CONTROL
   #define CURRENT_STEP          50  // [mA]
   #define AUTO_ADJUST_MAX     1300  // [mA], 1300mA_rms = 1840mA_peak
@@ -1060,7 +1060,7 @@
  * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
  *
  * M200 D0 to disable, M200 Dn to set a new diameter.
- */ 
+ */
 //#define VOLUMETRIC_DEFAULT_ON
 
 /**
diff --git a/Marlin/example_configurations/Hephestos_2/Configuration_adv.h b/Marlin/example_configurations/Hephestos_2/Configuration_adv.h
index c3d271376..a8899ab83 100644
--- a/Marlin/example_configurations/Hephestos_2/Configuration_adv.h
+++ b/Marlin/example_configurations/Hephestos_2/Configuration_adv.h
@@ -828,7 +828,7 @@
    * Increase current every 5s by CURRENT_STEP until stepper temperature prewarn gets triggered,
    * then decrease current by CURRENT_STEP until temperature prewarn is cleared.
    * Adjusting starts from X/Y/Z/E_MAX_CURRENT but will not increase over AUTO_ADJUST_MAX
-   */ 
+   */
   //#define AUTOMATIC_CURRENT_CONTROL
   #define CURRENT_STEP          50  // [mA]
   #define AUTO_ADJUST_MAX     1300  // [mA], 1300mA_rms = 1840mA_peak
@@ -1043,7 +1043,7 @@
  * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
  *
  * M200 D0 to disable, M200 Dn to set a new diameter.
- */ 
+ */
 //#define VOLUMETRIC_DEFAULT_ON
 
 /**
diff --git a/Marlin/example_configurations/K8200/Configuration_adv.h b/Marlin/example_configurations/K8200/Configuration_adv.h
index 97ab4c3dd..f85d1009d 100644
--- a/Marlin/example_configurations/K8200/Configuration_adv.h
+++ b/Marlin/example_configurations/K8200/Configuration_adv.h
@@ -858,7 +858,7 @@
    * Increase current every 5s by CURRENT_STEP until stepper temperature prewarn gets triggered,
    * then decrease current by CURRENT_STEP until temperature prewarn is cleared.
    * Adjusting starts from X/Y/Z/E_MAX_CURRENT but will not increase over AUTO_ADJUST_MAX
-   */ 
+   */
   //#define AUTOMATIC_CURRENT_CONTROL
   #define CURRENT_STEP          50  // [mA]
   #define AUTO_ADJUST_MAX     1300  // [mA], 1300mA_rms = 1840mA_peak
@@ -1073,7 +1073,7 @@
  * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
  *
  * M200 D0 to disable, M200 Dn to set a new diameter.
- */ 
+ */
 //#define VOLUMETRIC_DEFAULT_ON
 
 /**
diff --git a/Marlin/example_configurations/K8400/Configuration_adv.h b/Marlin/example_configurations/K8400/Configuration_adv.h
index 129a96774..fc293e345 100644
--- a/Marlin/example_configurations/K8400/Configuration_adv.h
+++ b/Marlin/example_configurations/K8400/Configuration_adv.h
@@ -845,7 +845,7 @@
    * Increase current every 5s by CURRENT_STEP until stepper temperature prewarn gets triggered,
    * then decrease current by CURRENT_STEP until temperature prewarn is cleared.
    * Adjusting starts from X/Y/Z/E_MAX_CURRENT but will not increase over AUTO_ADJUST_MAX
-   */ 
+   */
   //#define AUTOMATIC_CURRENT_CONTROL
   #define CURRENT_STEP          50  // [mA]
   #define AUTO_ADJUST_MAX     1300  // [mA], 1300mA_rms = 1840mA_peak
@@ -1060,7 +1060,7 @@
  * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
  *
  * M200 D0 to disable, M200 Dn to set a new diameter.
- */ 
+ */
 //#define VOLUMETRIC_DEFAULT_ON
 
 /**
diff --git a/Marlin/example_configurations/RigidBot/Configuration_adv.h b/Marlin/example_configurations/RigidBot/Configuration_adv.h
index 1326b550a..4751b30fd 100644
--- a/Marlin/example_configurations/RigidBot/Configuration_adv.h
+++ b/Marlin/example_configurations/RigidBot/Configuration_adv.h
@@ -845,7 +845,7 @@
    * Increase current every 5s by CURRENT_STEP until stepper temperature prewarn gets triggered,
    * then decrease current by CURRENT_STEP until temperature prewarn is cleared.
    * Adjusting starts from X/Y/Z/E_MAX_CURRENT but will not increase over AUTO_ADJUST_MAX
-   */ 
+   */
   //#define AUTOMATIC_CURRENT_CONTROL
   #define CURRENT_STEP          50  // [mA]
   #define AUTO_ADJUST_MAX     1300  // [mA], 1300mA_rms = 1840mA_peak
@@ -1060,7 +1060,7 @@
  * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
  *
  * M200 D0 to disable, M200 Dn to set a new diameter.
- */ 
+ */
 //#define VOLUMETRIC_DEFAULT_ON
 
 /**
diff --git a/Marlin/example_configurations/SCARA/Configuration_adv.h b/Marlin/example_configurations/SCARA/Configuration_adv.h
index 0276f1a22..67dc5630a 100644
--- a/Marlin/example_configurations/SCARA/Configuration_adv.h
+++ b/Marlin/example_configurations/SCARA/Configuration_adv.h
@@ -845,7 +845,7 @@
    * Increase current every 5s by CURRENT_STEP until stepper temperature prewarn gets triggered,
    * then decrease current by CURRENT_STEP until temperature prewarn is cleared.
    * Adjusting starts from X/Y/Z/E_MAX_CURRENT but will not increase over AUTO_ADJUST_MAX
-   */ 
+   */
   //#define AUTOMATIC_CURRENT_CONTROL
   #define CURRENT_STEP          50  // [mA]
   #define AUTO_ADJUST_MAX     1300  // [mA], 1300mA_rms = 1840mA_peak
@@ -1060,7 +1060,7 @@
  * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
  *
  * M200 D0 to disable, M200 Dn to set a new diameter.
- */ 
+ */
 //#define VOLUMETRIC_DEFAULT_ON
 
 /**
diff --git a/Marlin/example_configurations/TAZ4/Configuration_adv.h b/Marlin/example_configurations/TAZ4/Configuration_adv.h
index 4ebc38302..b347b3d7d 100644
--- a/Marlin/example_configurations/TAZ4/Configuration_adv.h
+++ b/Marlin/example_configurations/TAZ4/Configuration_adv.h
@@ -853,7 +853,7 @@
    * Increase current every 5s by CURRENT_STEP until stepper temperature prewarn gets triggered,
    * then decrease current by CURRENT_STEP until temperature prewarn is cleared.
    * Adjusting starts from X/Y/Z/E_MAX_CURRENT but will not increase over AUTO_ADJUST_MAX
-   */ 
+   */
   //#define AUTOMATIC_CURRENT_CONTROL
   #define CURRENT_STEP          50  // [mA]
   #define AUTO_ADJUST_MAX     1300  // [mA], 1300mA_rms = 1840mA_peak
@@ -1068,7 +1068,7 @@
  * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
  *
  * M200 D0 to disable, M200 Dn to set a new diameter.
- */ 
+ */
 //#define VOLUMETRIC_DEFAULT_ON
 
 /**
diff --git a/Marlin/example_configurations/WITBOX/Configuration_adv.h b/Marlin/example_configurations/WITBOX/Configuration_adv.h
index dc40f3dee..b5e1d2832 100644
--- a/Marlin/example_configurations/WITBOX/Configuration_adv.h
+++ b/Marlin/example_configurations/WITBOX/Configuration_adv.h
@@ -845,7 +845,7 @@
    * Increase current every 5s by CURRENT_STEP until stepper temperature prewarn gets triggered,
    * then decrease current by CURRENT_STEP until temperature prewarn is cleared.
    * Adjusting starts from X/Y/Z/E_MAX_CURRENT but will not increase over AUTO_ADJUST_MAX
-   */ 
+   */
   //#define AUTOMATIC_CURRENT_CONTROL
   #define CURRENT_STEP          50  // [mA]
   #define AUTO_ADJUST_MAX     1300  // [mA], 1300mA_rms = 1840mA_peak
@@ -1060,7 +1060,7 @@
  * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
  *
  * M200 D0 to disable, M200 Dn to set a new diameter.
- */ 
+ */
 //#define VOLUMETRIC_DEFAULT_ON
 
 /**
diff --git a/Marlin/example_configurations/delta/flsun_kossel_mini/Configuration_adv.h b/Marlin/example_configurations/delta/flsun_kossel_mini/Configuration_adv.h
index 461c98d15..f1f703aa3 100644
--- a/Marlin/example_configurations/delta/flsun_kossel_mini/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/flsun_kossel_mini/Configuration_adv.h
@@ -850,7 +850,7 @@
    * Increase current every 5s by CURRENT_STEP until stepper temperature prewarn gets triggered,
    * then decrease current by CURRENT_STEP until temperature prewarn is cleared.
    * Adjusting starts from X/Y/Z/E_MAX_CURRENT but will not increase over AUTO_ADJUST_MAX
-   */ 
+   */
   //#define AUTOMATIC_CURRENT_CONTROL
   #define CURRENT_STEP          50  // [mA]
   #define AUTO_ADJUST_MAX     1300  // [mA], 1300mA_rms = 1840mA_peak
@@ -1065,7 +1065,7 @@
  * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
  *
  * M200 D0 to disable, M200 Dn to set a new diameter.
- */ 
+ */
 //#define VOLUMETRIC_DEFAULT_ON
 
 /**
diff --git a/Marlin/example_configurations/delta/generic/Configuration_adv.h b/Marlin/example_configurations/delta/generic/Configuration_adv.h
index 879338196..4e0982631 100644
--- a/Marlin/example_configurations/delta/generic/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/generic/Configuration_adv.h
@@ -847,7 +847,7 @@
    * Increase current every 5s by CURRENT_STEP until stepper temperature prewarn gets triggered,
    * then decrease current by CURRENT_STEP until temperature prewarn is cleared.
    * Adjusting starts from X/Y/Z/E_MAX_CURRENT but will not increase over AUTO_ADJUST_MAX
-   */ 
+   */
   //#define AUTOMATIC_CURRENT_CONTROL
   #define CURRENT_STEP          50  // [mA]
   #define AUTO_ADJUST_MAX     1300  // [mA], 1300mA_rms = 1840mA_peak
@@ -1062,7 +1062,7 @@
  * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
  *
  * M200 D0 to disable, M200 Dn to set a new diameter.
- */ 
+ */
 //#define VOLUMETRIC_DEFAULT_ON
 
 /**
diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
index 879338196..4e0982631 100644
--- a/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
@@ -847,7 +847,7 @@
    * Increase current every 5s by CURRENT_STEP until stepper temperature prewarn gets triggered,
    * then decrease current by CURRENT_STEP until temperature prewarn is cleared.
    * Adjusting starts from X/Y/Z/E_MAX_CURRENT but will not increase over AUTO_ADJUST_MAX
-   */ 
+   */
   //#define AUTOMATIC_CURRENT_CONTROL
   #define CURRENT_STEP          50  // [mA]
   #define AUTO_ADJUST_MAX     1300  // [mA], 1300mA_rms = 1840mA_peak
@@ -1062,7 +1062,7 @@
  * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
  *
  * M200 D0 to disable, M200 Dn to set a new diameter.
- */ 
+ */
 //#define VOLUMETRIC_DEFAULT_ON
 
 /**
diff --git a/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
index fbf33bf2c..2b32809a8 100644
--- a/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
@@ -852,7 +852,7 @@
    * Increase current every 5s by CURRENT_STEP until stepper temperature prewarn gets triggered,
    * then decrease current by CURRENT_STEP until temperature prewarn is cleared.
    * Adjusting starts from X/Y/Z/E_MAX_CURRENT but will not increase over AUTO_ADJUST_MAX
-   */ 
+   */
   //#define AUTOMATIC_CURRENT_CONTROL
   #define CURRENT_STEP          50  // [mA]
   #define AUTO_ADJUST_MAX     1300  // [mA], 1300mA_rms = 1840mA_peak
@@ -1067,7 +1067,7 @@
  * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
  *
  * M200 D0 to disable, M200 Dn to set a new diameter.
- */ 
+ */
 //#define VOLUMETRIC_DEFAULT_ON
 
 /**
diff --git a/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
index 1f1ce97ab..3fa66b4cc 100644
--- a/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
@@ -847,7 +847,7 @@
    * Increase current every 5s by CURRENT_STEP until stepper temperature prewarn gets triggered,
    * then decrease current by CURRENT_STEP until temperature prewarn is cleared.
    * Adjusting starts from X/Y/Z/E_MAX_CURRENT but will not increase over AUTO_ADJUST_MAX
-   */ 
+   */
   //#define AUTOMATIC_CURRENT_CONTROL
   #define CURRENT_STEP          50  // [mA]
   #define AUTO_ADJUST_MAX     1300  // [mA], 1300mA_rms = 1840mA_peak
@@ -1062,7 +1062,7 @@
  * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
  *
  * M200 D0 to disable, M200 Dn to set a new diameter.
- */ 
+ */
 //#define VOLUMETRIC_DEFAULT_ON
 
 /**
diff --git a/Marlin/example_configurations/makibox/Configuration_adv.h b/Marlin/example_configurations/makibox/Configuration_adv.h
index 171e61832..84e65c0ed 100644
--- a/Marlin/example_configurations/makibox/Configuration_adv.h
+++ b/Marlin/example_configurations/makibox/Configuration_adv.h
@@ -845,7 +845,7 @@
    * Increase current every 5s by CURRENT_STEP until stepper temperature prewarn gets triggered,
    * then decrease current by CURRENT_STEP until temperature prewarn is cleared.
    * Adjusting starts from X/Y/Z/E_MAX_CURRENT but will not increase over AUTO_ADJUST_MAX
-   */ 
+   */
   //#define AUTOMATIC_CURRENT_CONTROL
   #define CURRENT_STEP          50  // [mA]
   #define AUTO_ADJUST_MAX     1300  // [mA], 1300mA_rms = 1840mA_peak
@@ -1060,7 +1060,7 @@
  * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
  *
  * M200 D0 to disable, M200 Dn to set a new diameter.
- */ 
+ */
 //#define VOLUMETRIC_DEFAULT_ON
 
 /**
diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
index b6baf4d4f..ab80eca71 100644
--- a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
+++ b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
@@ -845,7 +845,7 @@
    * Increase current every 5s by CURRENT_STEP until stepper temperature prewarn gets triggered,
    * then decrease current by CURRENT_STEP until temperature prewarn is cleared.
    * Adjusting starts from X/Y/Z/E_MAX_CURRENT but will not increase over AUTO_ADJUST_MAX
-   */ 
+   */
   //#define AUTOMATIC_CURRENT_CONTROL
   #define CURRENT_STEP          50  // [mA]
   #define AUTO_ADJUST_MAX     1300  // [mA], 1300mA_rms = 1840mA_peak
@@ -1060,7 +1060,7 @@
  * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
  *
  * M200 D0 to disable, M200 Dn to set a new diameter.
- */ 
+ */
 //#define VOLUMETRIC_DEFAULT_ON
 
 /**
diff --git a/Marlin/pinsDebug_Teensyduino.h b/Marlin/pinsDebug_Teensyduino.h
index fc5c03abe..187c190f6 100644
--- a/Marlin/pinsDebug_Teensyduino.h
+++ b/Marlin/pinsDebug_Teensyduino.h
@@ -19,7 +19,7 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
- 
+
 //
 //  some of the pin mapping functions of the Teensduino extension to the Arduino IDE
 //  do not function the same as the other Arduino extensions
diff --git a/Marlin/stepper_dac.cpp b/Marlin/stepper_dac.cpp
index 798768ebf..7d47602cb 100644
--- a/Marlin/stepper_dac.cpp
+++ b/Marlin/stepper_dac.cpp
@@ -64,7 +64,7 @@
 
     mcp4728_setVref_all(DAC_STEPPER_VREF);
     mcp4728_setGain_all(DAC_STEPPER_GAIN);
-    
+
     if (mcp4728_getDrvPct(0) < 1 || mcp4728_getDrvPct(1) < 1 || mcp4728_getDrvPct(2) < 1 || mcp4728_getDrvPct(3) < 1 ) {
       mcp4728_setDrvPct(dac_channel_pct);
       mcp4728_eepromWrite();
diff --git a/Marlin/temperature.cpp b/Marlin/temperature.cpp
index 735d608ca..af76edb0f 100644
--- a/Marlin/temperature.cpp
+++ b/Marlin/temperature.cpp
@@ -1491,7 +1491,7 @@ void Temperature::isr() {
   // at the end of its run, potentially causing re-entry. This flag prevents it.
   if (in_temp_isr) return;
   in_temp_isr = true;
-  
+
   // Allow UART and stepper ISRs
   CBI(TIMSK0, OCIE0B); //Disable Temperature ISR
   sei();
diff --git a/Marlin/ultralcd.cpp b/Marlin/ultralcd.cpp
index f788addde..b6f33cc32 100755
--- a/Marlin/ultralcd.cpp
+++ b/Marlin/ultralcd.cpp
@@ -428,7 +428,7 @@ uint16_t max_display_update_time = 0;
         }
         else if (screen == lcd_status_screen && currentScreen == lcd_main_menu && PENDING(millis(), doubleclick_expire_ms))
           screen = lcd_babystep_z;
-      #endif 
+      #endif
 
       currentScreen = screen;
       encoderPosition = encoder;