Fix TOUCH_UI_FTDI_EVE bugs (#16540)

Marlin/src/lcd/extensible_ui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/commands.cpp

@@ -80,7 +80,7 @@ uint16_t CLCD::FontMetrics::get_text_width(progmem_str str, size_t n) const {
 /************************** HOST COMMAND FUNCTION *********************************/
 
 void CLCD::host_cmd (unsigned char host_command, unsigned char byte2) {  // Sends 24-Bit Host Command to LCD
-  if (host_command != ACTIVE) {
+  if (host_command != FTDI::ACTIVE) {
     host_command |= 0x40;
   }
   spi_ftdi_select();
@@ -1062,7 +1062,7 @@ void CLCD::init() {
     host_cmd(CLKINT, 0);
   }
 
-  host_cmd(ACTIVE, 0);                        // Activate the System Clock
+  host_cmd(FTDI::ACTIVE, 0);                        // Activate the System Clock
 
   /* read the device-id until it returns 0x7c or times out, should take less than 150ms */
   uint8_t counter;

Marlin/src/lcd/extensible_ui/lib/ftdi_eve_touch_ui/marlin_events.cpp

@@ -130,6 +130,28 @@ namespace ExtUI {
     void onMeshUpdate(const int8_t, const int8_t, const float) {
     }
   #endif
+
+  #if HAS_PID_HEATING
+    void OnPidTuning(const result_t rst) {
+      // Called for temperature PID tuning result
+      SERIAL_ECHOLNPAIR("OnPidTuning:", rst);
+      switch (rst) {
+        case PID_BAD_EXTRUDER_NUM:
+          StatusScreen::setStatusMessage(MSG_PID_BAD_EXTRUDER_NUM);
+          break;
+        case PID_TEMP_TOO_HIGH:
+          StatusScreen::setStatusMessage(MSG_PID_TEMP_TOO_HIGH);
+          break;
+        case PID_TUNING_TIMEOUT:
+          StatusScreen::setStatusMessage(MSG_PID_TIMEOUT);
+          break;
+        case PID_DONE:
+          StatusScreen::setStatusMessage(MSG_PID_AUTOTUNE_FINISHED);
+          break;
+      }
+      GOTO_SCREEN(StatusScreen);
+    }
+  #endif // HAS_PID_HEATING
 }
 
 #endif // TOUCH_UI_FTDI_EVE

Marlin/src/lcd/extensible_ui/lib/ftdi_eve_touch_ui/screens/nudge_nozzle_screen.cpp

@@ -45,7 +45,7 @@ void NudgeNozzleScreen::onRedraw(draw_mode_t what) {
   widgets_t w(what);
   w.precision(2, BaseNumericAdjustmentScreen::DEFAULT_MIDRANGE).units(GET_TEXT_F(MSG_UNITS_MM));
 
-  w.heading(                   GET_TEXT_F(MSG_NUDGE_NOZZLE));
+  w.heading(GET_TEXT_F(MSG_NUDGE_NOZZLE));
   #if ENABLED(BABYSTEP_XY)
   w.color(x_axis).adjuster(2, GET_TEXT_F(MSG_AXIS_X), screen_data.NudgeNozzleScreen.rel.x / getAxisSteps_per_mm(X));
   w.color(y_axis).adjuster(4, GET_TEXT_F(MSG_AXIS_Y), screen_data.NudgeNozzleScreen.rel.y / getAxisSteps_per_mm(Y));
@@ -53,11 +53,11 @@ void NudgeNozzleScreen::onRedraw(draw_mode_t what) {
   w.color(z_axis).adjuster(6, GET_TEXT_F(MSG_AXIS_Z), screen_data.NudgeNozzleScreen.rel.z / getAxisSteps_per_mm(Z));
   w.increments();
   #if EXTRUDERS > 1
-    w.toggle  (8,  GET_TEXT_F(MSG_ADJUST_BOTH_NOZZLES), screen_data.NudgeNozzleScreen.link_nozzles);
+    w.toggle(8, GET_TEXT_F(MSG_ADJUST_BOTH_NOZZLES), screen_data.NudgeNozzleScreen.link_nozzles);
   #endif
 
   #if EXTRUDERS > 1 || HAS_BED_PROBE
-    w.toggle  (9,  GET_TEXT_F(MSG_SHOW_OFFSETS), screen_data.NudgeNozzleScreen.show_offsets);
+    w.toggle(9, GET_TEXT_F(MSG_SHOW_OFFSETS), screen_data.NudgeNozzleScreen.show_offsets);
 
     if (screen_data.NudgeNozzleScreen.show_offsets) {
       char str[19];
@@ -69,12 +69,12 @@ void NudgeNozzleScreen::onRedraw(draw_mode_t what) {
         dtostrf(getZOffset_mm(), 4, 2, str);
         strcat(str, " ");
         strcat_P(str, GET_TEXT(MSG_UNITS_MM));
-        w.text_field  (0,  GET_TEXT_F(MSG_ZPROBE_ZOFFSET), str);
+        w.text_field(0, GET_TEXT_F(MSG_ZPROBE_ZOFFSET), str);
       #endif
 
-      #if EXTRUDERS > 1
+      #if HOTENDS > 1
         format_position(str, getNozzleOffset_mm(X, E1), getNozzleOffset_mm(Y, E1), getNozzleOffset_mm(Z, E1));
-        w.text_field  (0, GET_TEXT_F(MSG_OFFSETS_MENU), str);
+        w.text_field(0, GET_TEXT_F(MSG_OFFSETS_MENU), str);
       #endif
     }
   #endif
@@ -99,8 +99,7 @@ bool NudgeNozzleScreen::onTouchHeld(uint8_t tag) {
       case 8: screen_data.NudgeNozzleScreen.link_nozzles = !link; break;
     #endif
     case 9: screen_data.NudgeNozzleScreen.show_offsets = !screen_data.NudgeNozzleScreen.show_offsets; break;
-    default:
-      return false;
+    default: return false;
   }
   #if EXTRUDERS > 1 || HAS_BED_PROBE
     SaveSettingsDialogBox::settingsChanged();
@@ -112,9 +111,9 @@ bool NudgeNozzleScreen::onTouchEnd(uint8_t tag) {
   if (tag == 1) {
     SaveSettingsDialogBox::promptToSaveSettings();
     return true;
-  } else {
-    return BaseNumericAdjustmentScreen::onTouchEnd(tag);
   }
+  else
+    return BaseNumericAdjustmentScreen::onTouchEnd(tag);
 }
 
 void NudgeNozzleScreen::onIdle() {