Fix TOUCH_UI_FTDI_EVE bugs (#16540)

2.0.x
ellensp 5 years ago committed by Scott Lahteine
parent 1bb1ce7475
commit 5bd66241df

@ -80,7 +80,7 @@ uint16_t CLCD::FontMetrics::get_text_width(progmem_str str, size_t n) const {
/************************** HOST COMMAND FUNCTION *********************************/ /************************** HOST COMMAND FUNCTION *********************************/
void CLCD::host_cmd (unsigned char host_command, unsigned char byte2) { // Sends 24-Bit Host Command to LCD void CLCD::host_cmd (unsigned char host_command, unsigned char byte2) { // Sends 24-Bit Host Command to LCD
if (host_command != ACTIVE) { if (host_command != FTDI::ACTIVE) {
host_command |= 0x40; host_command |= 0x40;
} }
spi_ftdi_select(); spi_ftdi_select();
@ -1062,7 +1062,7 @@ void CLCD::init() {
host_cmd(CLKINT, 0); host_cmd(CLKINT, 0);
} }
host_cmd(ACTIVE, 0); // Activate the System Clock host_cmd(FTDI::ACTIVE, 0); // Activate the System Clock
/* read the device-id until it returns 0x7c or times out, should take less than 150ms */ /* read the device-id until it returns 0x7c or times out, should take less than 150ms */
uint8_t counter; uint8_t counter;

@ -130,6 +130,28 @@ namespace ExtUI {
void onMeshUpdate(const int8_t, const int8_t, const float) { void onMeshUpdate(const int8_t, const int8_t, const float) {
} }
#endif #endif
#if HAS_PID_HEATING
void OnPidTuning(const result_t rst) {
// Called for temperature PID tuning result
SERIAL_ECHOLNPAIR("OnPidTuning:", rst);
switch (rst) {
case PID_BAD_EXTRUDER_NUM:
StatusScreen::setStatusMessage(MSG_PID_BAD_EXTRUDER_NUM);
break;
case PID_TEMP_TOO_HIGH:
StatusScreen::setStatusMessage(MSG_PID_TEMP_TOO_HIGH);
break;
case PID_TUNING_TIMEOUT:
StatusScreen::setStatusMessage(MSG_PID_TIMEOUT);
break;
case PID_DONE:
StatusScreen::setStatusMessage(MSG_PID_AUTOTUNE_FINISHED);
break;
}
GOTO_SCREEN(StatusScreen);
}
#endif // HAS_PID_HEATING
} }
#endif // TOUCH_UI_FTDI_EVE #endif // TOUCH_UI_FTDI_EVE

@ -45,7 +45,7 @@ void NudgeNozzleScreen::onRedraw(draw_mode_t what) {
widgets_t w(what); widgets_t w(what);
w.precision(2, BaseNumericAdjustmentScreen::DEFAULT_MIDRANGE).units(GET_TEXT_F(MSG_UNITS_MM)); w.precision(2, BaseNumericAdjustmentScreen::DEFAULT_MIDRANGE).units(GET_TEXT_F(MSG_UNITS_MM));
w.heading( GET_TEXT_F(MSG_NUDGE_NOZZLE)); w.heading(GET_TEXT_F(MSG_NUDGE_NOZZLE));
#if ENABLED(BABYSTEP_XY) #if ENABLED(BABYSTEP_XY)
w.color(x_axis).adjuster(2, GET_TEXT_F(MSG_AXIS_X), screen_data.NudgeNozzleScreen.rel.x / getAxisSteps_per_mm(X)); w.color(x_axis).adjuster(2, GET_TEXT_F(MSG_AXIS_X), screen_data.NudgeNozzleScreen.rel.x / getAxisSteps_per_mm(X));
w.color(y_axis).adjuster(4, GET_TEXT_F(MSG_AXIS_Y), screen_data.NudgeNozzleScreen.rel.y / getAxisSteps_per_mm(Y)); w.color(y_axis).adjuster(4, GET_TEXT_F(MSG_AXIS_Y), screen_data.NudgeNozzleScreen.rel.y / getAxisSteps_per_mm(Y));
@ -53,11 +53,11 @@ void NudgeNozzleScreen::onRedraw(draw_mode_t what) {
w.color(z_axis).adjuster(6, GET_TEXT_F(MSG_AXIS_Z), screen_data.NudgeNozzleScreen.rel.z / getAxisSteps_per_mm(Z)); w.color(z_axis).adjuster(6, GET_TEXT_F(MSG_AXIS_Z), screen_data.NudgeNozzleScreen.rel.z / getAxisSteps_per_mm(Z));
w.increments(); w.increments();
#if EXTRUDERS > 1 #if EXTRUDERS > 1
w.toggle (8, GET_TEXT_F(MSG_ADJUST_BOTH_NOZZLES), screen_data.NudgeNozzleScreen.link_nozzles); w.toggle(8, GET_TEXT_F(MSG_ADJUST_BOTH_NOZZLES), screen_data.NudgeNozzleScreen.link_nozzles);
#endif #endif
#if EXTRUDERS > 1 || HAS_BED_PROBE #if EXTRUDERS > 1 || HAS_BED_PROBE
w.toggle (9, GET_TEXT_F(MSG_SHOW_OFFSETS), screen_data.NudgeNozzleScreen.show_offsets); w.toggle(9, GET_TEXT_F(MSG_SHOW_OFFSETS), screen_data.NudgeNozzleScreen.show_offsets);
if (screen_data.NudgeNozzleScreen.show_offsets) { if (screen_data.NudgeNozzleScreen.show_offsets) {
char str[19]; char str[19];
@ -69,12 +69,12 @@ void NudgeNozzleScreen::onRedraw(draw_mode_t what) {
dtostrf(getZOffset_mm(), 4, 2, str); dtostrf(getZOffset_mm(), 4, 2, str);
strcat(str, " "); strcat(str, " ");
strcat_P(str, GET_TEXT(MSG_UNITS_MM)); strcat_P(str, GET_TEXT(MSG_UNITS_MM));
w.text_field (0, GET_TEXT_F(MSG_ZPROBE_ZOFFSET), str); w.text_field(0, GET_TEXT_F(MSG_ZPROBE_ZOFFSET), str);
#endif #endif
#if EXTRUDERS > 1 #if HOTENDS > 1
format_position(str, getNozzleOffset_mm(X, E1), getNozzleOffset_mm(Y, E1), getNozzleOffset_mm(Z, E1)); format_position(str, getNozzleOffset_mm(X, E1), getNozzleOffset_mm(Y, E1), getNozzleOffset_mm(Z, E1));
w.text_field (0, GET_TEXT_F(MSG_OFFSETS_MENU), str); w.text_field(0, GET_TEXT_F(MSG_OFFSETS_MENU), str);
#endif #endif
} }
#endif #endif
@ -99,8 +99,7 @@ bool NudgeNozzleScreen::onTouchHeld(uint8_t tag) {
case 8: screen_data.NudgeNozzleScreen.link_nozzles = !link; break; case 8: screen_data.NudgeNozzleScreen.link_nozzles = !link; break;
#endif #endif
case 9: screen_data.NudgeNozzleScreen.show_offsets = !screen_data.NudgeNozzleScreen.show_offsets; break; case 9: screen_data.NudgeNozzleScreen.show_offsets = !screen_data.NudgeNozzleScreen.show_offsets; break;
default: default: return false;
return false;
} }
#if EXTRUDERS > 1 || HAS_BED_PROBE #if EXTRUDERS > 1 || HAS_BED_PROBE
SaveSettingsDialogBox::settingsChanged(); SaveSettingsDialogBox::settingsChanged();
@ -112,9 +111,9 @@ bool NudgeNozzleScreen::onTouchEnd(uint8_t tag) {
if (tag == 1) { if (tag == 1) {
SaveSettingsDialogBox::promptToSaveSettings(); SaveSettingsDialogBox::promptToSaveSettings();
return true; return true;
} else {
return BaseNumericAdjustmentScreen::onTouchEnd(tag);
} }
else
return BaseNumericAdjustmentScreen::onTouchEnd(tag);
} }
void NudgeNozzleScreen::onIdle() { void NudgeNozzleScreen::onIdle() {

Loading…
Cancel
Save