Bring configurations up to date, fix some comments

7 years ago · 5b03f23fa2
parent e3cedfa0ec
commit 5b03f23fa2
32 changed files with 182 additions and 161 deletions
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@ -988,7 +988,7 @@
 // M500 - stores parameters in EEPROM
 // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
 // M502 - reverts to the default "factory settings".  You still need to store them in EEPROM afterwards if you want to.
-//define this to enable EEPROM support
+// Define this to enable EEPROM support
 //#define EEPROM_SETTINGS

 #if ENABLED(EEPROM_SETTINGS)
@ -1392,6 +1392,16 @@
 //
 //#define BQ_LCD_SMART_CONTROLLER

+//
+// ANET_10 Controller supported displays.
+//
+//#define ANET_KEYPAD_LCD         // Requires ADC_KEYPAD_PIN to be assigned to an analog pin.
+                                  // This LCD is known to be susceptible to electrical interference
+                                  // which scrambles the display.  Pressing any button clears it up.
+//#define ANET_FULL_GRAPHICS_LCD  // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6
+                                  // A clone of the RepRapDiscount full graphics display but with
+                                  // different pins/wiring (see pins_ANET_10.h).
+
 //
 // CONTROLLER TYPE: I2C
 //
@ -1501,13 +1511,13 @@
 // SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure
 //#define SF_ARC_FIX

-// Support for the BariCUDA Paste Extruder.
+// Support for the BariCUDA Paste Extruder
 //#define BARICUDA

-//define BlinkM/CyzRgb Support
+// Support for BlinkM/CyzRgb
 //#define BLINKM

-//define PCA9632 PWM LED driver Support
+// Support for PCA9632 PWM LED driver
 //#define PCA9632

 /**
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@ -124,7 +124,7 @@
 #endif

 // Show Temperature ADC value
-//The M105 command return, besides traditional information, the ADC value read from temperature sensors.
+// Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES

 /**
--- a/Marlin/example_configurations/Anet/Configuration.h
+++ b/Marlin/example_configurations/Anet/Configuration.h
@ -58,15 +58,15 @@
 //===========================================================================
 //============================= DELTA Printer ===============================
 //===========================================================================
-// For a Delta printer replace the configuration files with the files in the
-// example_configurations/delta directory.
+// For a Delta printer start with one of the configuration files in the
+// example_configurations/delta directory and customize for your machine.
 //

 //===========================================================================
 //============================= SCARA Printer ===============================
 //===========================================================================
-// For a Scara printer replace the configuration files with the files in the
-// example_configurations/SCARA directory.
+// For a SCARA printer start with the configuration files in
+// example_configurations/SCARA and customize for your machine.
 //

 // @section info
@ -161,7 +161,10 @@
 //#define SWITCHING_EXTRUDER
 #if ENABLED(SWITCHING_EXTRUDER)
  #define SWITCHING_EXTRUDER_SERVO_NR 0
-  #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1
+  #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3]
+  #if EXTRUDERS > 3
+    #define SWITCHING_EXTRUDER_E23_SERVO_NR 1
+  #endif
 #endif

 // A dual-nozzle that uses a servomotor to raise/lower one of the nozzles
@ -596,7 +599,7 @@
 * Probe Type
 *
 * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc.
- * Activate one of these to use Auto Bed Leveling below.
+ * You must activate one of these to use Auto Bed Leveling below.
 */

 /**
@ -991,7 +994,7 @@
 // M500 - stores parameters in EEPROM
 // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
 // M502 - reverts to the default "factory settings".  You still need to store them in EEPROM afterwards if you want to.
-//define this to enable EEPROM support
+// Define this to enable EEPROM support
 #define EEPROM_SETTINGS

 #if ENABLED(EEPROM_SETTINGS)
@ -1307,6 +1310,12 @@
 //
 //#define ULTIPANEL

+//
+// Cartesio UI
+// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface
+//
+//#define CARTESIO_UI
+
 //
 // PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3)
 // http://reprap.org/wiki/PanelOne
@ -1391,12 +1400,6 @@
 //
 //#define BQ_LCD_SMART_CONTROLLER

-//
-// Cartesio UI
-// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface
-//
-//#define CARTESIO_UI
-
 //
 // ANET_10 Controller supported displays.
 //
@ -1423,6 +1426,9 @@
 //
 // Sainsmart YW Robot (LCM1602) LCD Display
 //
+// Note: This controller requires F.Malpartida's LiquidCrystal_I2C library
+// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home
+//
 //#define LCD_I2C_SAINSMART_YWROBOT

 //
@ -1453,11 +1459,6 @@
 //
 //#define U8GLIB_SSD1306

-//
-// TinyBoy2 128x64 OLED / Encoder Panel
-//
-//#define OLED_PANEL_TINYBOY2
-
 //
 // SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules
 //
@ -1475,6 +1476,11 @@
 //
 //#define SAV_3DLCD

+//
+// TinyBoy2 128x64 OLED / Encoder Panel
+//
+//#define OLED_PANEL_TINYBOY2
+
 //=============================================================================
 //=============================== Extra Features ==============================
 //=============================================================================
@ -1513,13 +1519,13 @@
 // SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure
 //#define SF_ARC_FIX

-// Support for the BariCUDA Paste Extruder.
+// Support for the BariCUDA Paste Extruder
 //#define BARICUDA

-//define BlinkM/CyzRgb Support
+// Support for BlinkM/CyzRgb
 //#define BLINKM

-//define PCA9632 PWM LED driver Support
+// Support for PCA9632 PWM LED driver
 //#define PCA9632

 /**
--- a/Marlin/example_configurations/Anet/Configuration_adv.h
+++ b/Marlin/example_configurations/Anet/Configuration_adv.h
@ -225,13 +225,11 @@
 */
 //#define CASE_LIGHT_ENABLE
 #if ENABLED(CASE_LIGHT_ENABLE)
-  #define CASE_LIGHT_PIN 4          // can be defined here or in the pins_XXX.h file for your board
-                                    //  pins_XXX.h file overrides this one
-  #define INVERT_CASE_LIGHT false             // set to true if case light is ON when pin is at 0
-  #define CASE_LIGHT_DEFAULT_ON true          // set default power up state to on or off
-  #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105   // set power up brightness 0-255 ( only used if on PWM
-                                              // and if CASE_LIGHT_DEFAULT is set to on
-  //#define MENU_ITEM_CASE_LIGHT              // Uncomment to have a Case Light entry in main menu
+  //#define CASE_LIGHT_PIN 4                  // Override the default pin if needed
+  #define INVERT_CASE_LIGHT false             // Set true if Case Light is ON when pin is LOW
+  #define CASE_LIGHT_DEFAULT_ON true          // Set default power-up state on
+  #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105   // Set default power-up brightness (0-255, requires PWM pin)
+  //#define MENU_ITEM_CASE_LIGHT              // Add a Case Light option to the LCD main menu
 #endif

 //===========================================================================
@ -680,10 +678,16 @@

 // @section extras

-// Arc interpretation settings:
-//#define ARC_SUPPORT // Disabling this saves ~2738 bytes
-#define MM_PER_ARC_SEGMENT 1
-#define N_ARC_CORRECTION 25
+//
+// G2/G3 Arc Support
+//
+//#define ARC_SUPPORT               // Disable this feature to save ~3226 bytes
+#if ENABLED(ARC_SUPPORT)
+  #define MM_PER_ARC_SEGMENT  1   // Length of each arc segment
+  #define N_ARC_CORRECTION   25   // Number of intertpolated segments between corrections
+  //#define ARC_P_CIRCLES         // Enable the 'P' parameter to specify complete circles
+  //#define CNC_WORKSPACE_PLANES  // Allow G2/G3 to operate in XY, ZX, or YZ planes
+#endif

 // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
 //#define BEZIER_CURVE_SUPPORT
@ -809,6 +813,7 @@
  #define PAUSE_PARK_NO_STEPPER_TIMEOUT       // Enable to have stepper motors hold position during filament change
                                              // even if it takes longer than DEFAULT_STEPPER_DEACTIVE_TIME.
  //#define PARK_HEAD_ON_PAUSE                // Go to filament change position on pause, return to print position on resume
+  //#define HOME_BEFORE_FILAMENT_CHANGE       // Ensure homing has been completed prior to parking for filament change
 #endif

 // @section tmc
@ -1201,12 +1206,12 @@
 /**
 * Auto-report temperatures with M155 S<seconds>
 */
-//#define AUTO_REPORT_TEMPERATURES
+#define AUTO_REPORT_TEMPERATURES

 /**
 * Include capabilities in M115 output
 */
-//#define EXTENDED_CAPABILITIES_REPORT
+#define EXTENDED_CAPABILITIES_REPORT

 /**
 * Volumetric extrusion default state
@ -1264,7 +1269,7 @@
 #endif

 //===========================================================================
-//============================ I2C Encoder Settings =========================
+//====================== I2C Position Encoder Settings ======================
 //===========================================================================
 /**
 *  I2C position encoders for closed loop control.
@ -1344,6 +1349,6 @@
  // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise.
  #define I2CPE_ERR_ROLLING_AVERAGE

-#endif
+#endif // I2C_POSITION_ENCODERS

 #endif // CONFIGURATION_ADV_H
--- a/Marlin/example_configurations/CL-260/Configuration.h
+++ b/Marlin/example_configurations/CL-260/Configuration.h
@ -985,7 +985,7 @@
 // M500 - stores parameters in EEPROM
 // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
 // M502 - reverts to the default "factory settings".  You still need to store them in EEPROM afterwards if you want to.
-//define this to enable EEPROM support
+// Define this to enable EEPROM support
 //#define EEPROM_SETTINGS

 #if ENABLED(EEPROM_SETTINGS)
@ -1508,13 +1508,13 @@
 // SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure
 //#define SF_ARC_FIX

-// Support for the BariCUDA Paste Extruder.
+// Support for the BariCUDA Paste Extruder
 //#define BARICUDA

-//define BlinkM/CyzRgb Support
+// Support for BlinkM/CyzRgb
 //#define BLINKM

-//define PCA9632 PWM LED driver Support
+// Support for PCA9632 PWM LED driver
 //#define PCA9632

 /**
--- a/Marlin/example_configurations/Cartesio/Configuration.h
+++ b/Marlin/example_configurations/Cartesio/Configuration.h
@ -982,7 +982,7 @@
 // M500 - stores parameters in EEPROM
 // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
 // M502 - reverts to the default "factory settings".  You still need to store them in EEPROM afterwards if you want to.
-//define this to enable EEPROM support
+// Define this to enable EEPROM support
 //#define EEPROM_SETTINGS

 #if ENABLED(EEPROM_SETTINGS)
@ -1505,13 +1505,13 @@
 // SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure
 //#define SF_ARC_FIX

-// Support for the BariCUDA Paste Extruder.
+// Support for the BariCUDA Paste Extruder
 //#define BARICUDA

-//define BlinkM/CyzRgb Support
+// Support for BlinkM/CyzRgb
 //#define BLINKM

-//define PCA9632 PWM LED driver Support
+// Support for PCA9632 PWM LED driver
 //#define PCA9632

 /**
--- a/Marlin/example_configurations/Felix/Configuration.h
+++ b/Marlin/example_configurations/Felix/Configuration.h
@ -966,7 +966,7 @@
 // M500 - stores parameters in EEPROM
 // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
 // M502 - reverts to the default "factory settings".  You still need to store them in EEPROM afterwards if you want to.
-//define this to enable EEPROM support
+// Define this to enable EEPROM support
 //#define EEPROM_SETTINGS

 #if ENABLED(EEPROM_SETTINGS)
@ -1489,13 +1489,13 @@
 // SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure
 //#define SF_ARC_FIX

-// Support for the BariCUDA Paste Extruder.
+// Support for the BariCUDA Paste Extruder
 //#define BARICUDA

-//define BlinkM/CyzRgb Support
+// Support for BlinkM/CyzRgb
 //#define BLINKM

-//define PCA9632 PWM LED driver Support
+// Support for PCA9632 PWM LED driver
 //#define PCA9632

 /**
--- a/Marlin/example_configurations/Felix/DUAL/Configuration.h
+++ b/Marlin/example_configurations/Felix/DUAL/Configuration.h
@ -966,7 +966,7 @@
 // M500 - stores parameters in EEPROM
 // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
 // M502 - reverts to the default "factory settings".  You still need to store them in EEPROM afterwards if you want to.
-//define this to enable EEPROM support
+// Define this to enable EEPROM support
 //#define EEPROM_SETTINGS

 #if ENABLED(EEPROM_SETTINGS)
@ -1489,13 +1489,13 @@
 // SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure
 //#define SF_ARC_FIX

-// Support for the BariCUDA Paste Extruder.
+// Support for the BariCUDA Paste Extruder
 //#define BARICUDA

-//define BlinkM/CyzRgb Support
+// Support for BlinkM/CyzRgb
 //#define BLINKM

-//define PCA9632 PWM LED driver Support
+// Support for PCA9632 PWM LED driver
 //#define PCA9632

 /**
--- a/Marlin/example_configurations/FolgerTech-i3-2020/Configuration.h
+++ b/Marlin/example_configurations/FolgerTech-i3-2020/Configuration.h
@ -988,7 +988,7 @@
 // M500 - stores parameters in EEPROM
 // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
 // M502 - reverts to the default "factory settings".  You still need to store them in EEPROM afterwards if you want to.
-//define this to enable EEPROM support
+// Define this to enable EEPROM support
 #define EEPROM_SETTINGS

 #if ENABLED(EEPROM_SETTINGS)
@ -1511,13 +1511,13 @@
 // SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure
 //#define SF_ARC_FIX

-// Support for the BariCUDA Paste Extruder.
+// Support for the BariCUDA Paste Extruder
 //#define BARICUDA

-//define BlinkM/CyzRgb Support
+// Support for BlinkM/CyzRgb
 //#define BLINKM

-//define PCA9632 PWM LED driver Support
+// Support for PCA9632 PWM LED driver
 //#define PCA9632

 /**
--- a/Marlin/example_configurations/Hephestos/Configuration.h
+++ b/Marlin/example_configurations/Hephestos/Configuration.h
@ -974,7 +974,7 @@
 // M500 - stores parameters in EEPROM
 // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
 // M502 - reverts to the default "factory settings".  You still need to store them in EEPROM afterwards if you want to.
-//define this to enable EEPROM support
+// Define this to enable EEPROM support
 //#define EEPROM_SETTINGS

 #if ENABLED(EEPROM_SETTINGS)
@ -1497,13 +1497,13 @@
 // SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure
 //#define SF_ARC_FIX

-// Support for the BariCUDA Paste Extruder.
+// Support for the BariCUDA Paste Extruder
 //#define BARICUDA

-//define BlinkM/CyzRgb Support
+// Support for BlinkM/CyzRgb
 //#define BLINKM

-//define PCA9632 PWM LED driver Support
+// Support for PCA9632 PWM LED driver
 //#define PCA9632

 /**
--- a/Marlin/example_configurations/Hephestos_2/Configuration.h
+++ b/Marlin/example_configurations/Hephestos_2/Configuration.h
@ -977,7 +977,7 @@
 // M500 - stores parameters in EEPROM
 // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
 // M502 - reverts to the default "factory settings".  You still need to store them in EEPROM afterwards if you want to.
-//define this to enable EEPROM support
+// Define this to enable EEPROM support
 #define EEPROM_SETTINGS

 #if ENABLED(EEPROM_SETTINGS)
@ -1500,13 +1500,13 @@
 // SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure
 //#define SF_ARC_FIX

-// Support for the BariCUDA Paste Extruder.
+// Support for the BariCUDA Paste Extruder
 //#define BARICUDA

-//define BlinkM/CyzRgb Support
+// Support for BlinkM/CyzRgb
 //#define BLINKM

-//define PCA9632 PWM LED driver Support
+// Support for PCA9632 PWM LED driver
 //#define PCA9632

 /**
--- a/Marlin/example_configurations/K8200/Configuration.h
+++ b/Marlin/example_configurations/K8200/Configuration.h
@ -1013,7 +1013,7 @@
 // M500 - stores parameters in EEPROM
 // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
 // M502 - reverts to the default "factory settings".  You still need to store them in EEPROM afterwards if you want to.
-//define this to enable EEPROM support
+// Define this to enable EEPROM support
 #define EEPROM_SETTINGS // K8200: uses EEPROM by default

 #if ENABLED(EEPROM_SETTINGS)
@ -1546,13 +1546,13 @@
 // SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure
 //#define SF_ARC_FIX

-// Support for the BariCUDA Paste Extruder.
+// Support for the BariCUDA Paste Extruder
 //#define BARICUDA

-//define BlinkM/CyzRgb Support
+// Support for BlinkM/CyzRgb
 //#define BLINKM

-//define PCA9632 PWM LED driver Support
+// Support for PCA9632 PWM LED driver
 //#define PCA9632

 /**
--- a/Marlin/example_configurations/K8400/Configuration.h
+++ b/Marlin/example_configurations/K8400/Configuration.h
@ -984,7 +984,7 @@
 // M500 - stores parameters in EEPROM
 // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
 // M502 - reverts to the default "factory settings".  You still need to store them in EEPROM afterwards if you want to.
-//define this to enable EEPROM support
+// Define this to enable EEPROM support
 #define EEPROM_SETTINGS

 #if ENABLED(EEPROM_SETTINGS)
@ -1507,13 +1507,13 @@
 // SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure
 //#define SF_ARC_FIX

-// Support for the BariCUDA Paste Extruder.
+// Support for the BariCUDA Paste Extruder
 //#define BARICUDA

-//define BlinkM/CyzRgb Support
+// Support for BlinkM/CyzRgb
 //#define BLINKM

-//define PCA9632 PWM LED driver Support
+// Support for PCA9632 PWM LED driver
 //#define PCA9632

 /**
--- a/Marlin/example_configurations/K8400/Dual-head/Configuration.h
+++ b/Marlin/example_configurations/K8400/Dual-head/Configuration.h
@ -984,7 +984,7 @@
 // M500 - stores parameters in EEPROM
 // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
 // M502 - reverts to the default "factory settings".  You still need to store them in EEPROM afterwards if you want to.
-//define this to enable EEPROM support
+// Define this to enable EEPROM support
 #define EEPROM_SETTINGS

 #if ENABLED(EEPROM_SETTINGS)
@ -1507,13 +1507,13 @@
 // SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure
 //#define SF_ARC_FIX

-// Support for the BariCUDA Paste Extruder.
+// Support for the BariCUDA Paste Extruder
 //#define BARICUDA

-//define BlinkM/CyzRgb Support
+// Support for BlinkM/CyzRgb
 //#define BLINKM

-//define PCA9632 PWM LED driver Support
+// Support for PCA9632 PWM LED driver
 //#define PCA9632

 /**
--- a/Marlin/example_configurations/M150/Configuration.h
+++ b/Marlin/example_configurations/M150/Configuration.h
@ -1011,7 +1011,7 @@
 // M500 - stores parameters in EEPROM
 // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
 // M502 - reverts to the default "factory settings".  You still need to store them in EEPROM afterwards if you want to.
-//define this to enable EEPROM support
+// Define this to enable EEPROM support
 #define EEPROM_SETTINGS

 #if ENABLED(EEPROM_SETTINGS)
@ -1534,13 +1534,13 @@
 // SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure
 //#define SF_ARC_FIX

-// Support for the BariCUDA Paste Extruder.
+// Support for the BariCUDA Paste Extruder
 //#define BARICUDA

-//define BlinkM/CyzRgb Support
+// Support for BlinkM/CyzRgb
 //#define BLINKM

-//define PCA9632 PWM LED driver Support
+// Support for PCA9632 PWM LED driver
 //#define PCA9632

 /**
--- a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
+++ b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
@ -984,7 +984,7 @@
 // M500 - stores parameters in EEPROM
 // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
 // M502 - reverts to the default "factory settings".  You still need to store them in EEPROM afterwards if you want to.
-//define this to enable EEPROM support
+// Define this to enable EEPROM support
 //#define EEPROM_SETTINGS

 #if ENABLED(EEPROM_SETTINGS)
@ -1507,13 +1507,13 @@
 // SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure
 //#define SF_ARC_FIX

-// Support for the BariCUDA Paste Extruder.
+// Support for the BariCUDA Paste Extruder
 //#define BARICUDA

-//define BlinkM/CyzRgb Support
+// Support for BlinkM/CyzRgb
 //#define BLINKM

-//define PCA9632 PWM LED driver Support
+// Support for PCA9632 PWM LED driver
 //#define PCA9632

 /**
--- a/Marlin/example_configurations/RigidBot/Configuration.h
+++ b/Marlin/example_configurations/RigidBot/Configuration.h
@ -982,7 +982,7 @@
 // M500 - stores parameters in EEPROM
 // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
 // M502 - reverts to the default "factory settings".  You still need to store them in EEPROM afterwards if you want to.
-//define this to enable EEPROM support
+// Define this to enable EEPROM support
 #define EEPROM_SETTINGS

 #if ENABLED(EEPROM_SETTINGS)
@ -1507,13 +1507,13 @@
 // SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure
 //#define SF_ARC_FIX

-// Support for the BariCUDA Paste Extruder.
+// Support for the BariCUDA Paste Extruder
 //#define BARICUDA

-//define BlinkM/CyzRgb Support
+// Support for BlinkM/CyzRgb
 //#define BLINKM

-//define PCA9632 PWM LED driver Support
+// Support for PCA9632 PWM LED driver
 //#define PCA9632

 /**
--- a/Marlin/example_configurations/SCARA/Configuration.h
+++ b/Marlin/example_configurations/SCARA/Configuration.h
@ -996,7 +996,7 @@
 // M500 - stores parameters in EEPROM
 // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
 // M502 - reverts to the default "factory settings".  You still need to store them in EEPROM afterwards if you want to.
-//define this to enable EEPROM support
+// Define this to enable EEPROM support
 //#define EEPROM_SETTINGS

 #if ENABLED(EEPROM_SETTINGS)
@ -1519,13 +1519,13 @@
 // SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure
 //#define SF_ARC_FIX

-// Support for the BariCUDA Paste Extruder.
+// Support for the BariCUDA Paste Extruder
 //#define BARICUDA

-//define BlinkM/CyzRgb Support
+// Support for BlinkM/CyzRgb
 //#define BLINKM

-//define PCA9632 PWM LED driver Support
+// Support for PCA9632 PWM LED driver
 //#define PCA9632

 /**
--- a/Marlin/example_configurations/TAZ4/Configuration.h
+++ b/Marlin/example_configurations/TAZ4/Configuration.h
@ -1003,7 +1003,7 @@
 // M500 - stores parameters in EEPROM
 // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
 // M502 - reverts to the default "factory settings".  You still need to store them in EEPROM afterwards if you want to.
-//define this to enable EEPROM support
+// Define this to enable EEPROM support
 #define EEPROM_SETTINGS

 #if ENABLED(EEPROM_SETTINGS)
@ -1526,13 +1526,13 @@
 // SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure
 //#define SF_ARC_FIX

-// Support for the BariCUDA Paste Extruder.
+// Support for the BariCUDA Paste Extruder
 //#define BARICUDA

-//define BlinkM/CyzRgb Support
+// Support for BlinkM/CyzRgb
 //#define BLINKM

-//define PCA9632 PWM LED driver Support
+// Support for PCA9632 PWM LED driver
 //#define PCA9632

 /**
--- a/Marlin/example_configurations/TinyBoy2/Configuration.h
+++ b/Marlin/example_configurations/TinyBoy2/Configuration.h
@ -1040,7 +1040,7 @@
 // M500 - stores parameters in EEPROM
 // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
 // M502 - reverts to the default "factory settings".  You still need to store them in EEPROM afterwards if you want to.
-//define this to enable EEPROM support
+// Define this to enable EEPROM support
 #define EEPROM_SETTINGS

 #if ENABLED(EEPROM_SETTINGS)
@ -1568,13 +1568,13 @@
 // SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure
 //#define SF_ARC_FIX

-// Support for the BariCUDA Paste Extruder.
+// Support for the BariCUDA Paste Extruder
 //#define BARICUDA

-//define BlinkM/CyzRgb Support
+// Support for BlinkM/CyzRgb
 //#define BLINKM

-//define PCA9632 PWM LED driver Support
+// Support for PCA9632 PWM LED driver
 //#define PCA9632

 /**
--- a/Marlin/example_configurations/WITBOX/Configuration.h
+++ b/Marlin/example_configurations/WITBOX/Configuration.h
@ -974,7 +974,7 @@
 // M500 - stores parameters in EEPROM
 // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
 // M502 - reverts to the default "factory settings".  You still need to store them in EEPROM afterwards if you want to.
-//define this to enable EEPROM support
+// Define this to enable EEPROM support
 //#define EEPROM_SETTINGS

 #if ENABLED(EEPROM_SETTINGS)
@ -1497,13 +1497,13 @@
 // SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure
 //#define SF_ARC_FIX

-// Support for the BariCUDA Paste Extruder.
+// Support for the BariCUDA Paste Extruder
 //#define BARICUDA

-//define BlinkM/CyzRgb Support
+// Support for BlinkM/CyzRgb
 //#define BLINKM

-//define PCA9632 PWM LED driver Support
+// Support for PCA9632 PWM LED driver
 //#define PCA9632

 /**
--- a/Marlin/example_configurations/adafruit/ST7565/Configuration.h
+++ b/Marlin/example_configurations/adafruit/ST7565/Configuration.h
@ -984,7 +984,7 @@
 // M500 - stores parameters in EEPROM
 // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
 // M502 - reverts to the default "factory settings".  You still need to store them in EEPROM afterwards if you want to.
-//define this to enable EEPROM support
+// Define this to enable EEPROM support
 //#define EEPROM_SETTINGS

 #if ENABLED(EEPROM_SETTINGS)
@ -1507,13 +1507,13 @@
 // SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure
 //#define SF_ARC_FIX

-// Support for the BariCUDA Paste Extruder.
+// Support for the BariCUDA Paste Extruder
 //#define BARICUDA

-//define BlinkM/CyzRgb Support
+// Support for BlinkM/CyzRgb
 //#define BLINKM

-//define PCA9632 PWM LED driver Support
+// Support for PCA9632 PWM LED driver
 //#define PCA9632

 /**
--- a/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration.h
+++ b/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration.h
@ -1104,7 +1104,7 @@
 // M500 - stores parameters in EEPROM
 // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
 // M502 - reverts to the default "factory settings".  You still need to store them in EEPROM afterwards if you want to.
-//define this to enable EEPROM support
+// Define this to enable EEPROM support
 #define EEPROM_SETTINGS

 #if ENABLED(EEPROM_SETTINGS)
@ -1628,13 +1628,13 @@
 // SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure
 //#define SF_ARC_FIX

-// Support for the BariCUDA Paste Extruder.
+// Support for the BariCUDA Paste Extruder
 //#define BARICUDA

-//define BlinkM/CyzRgb Support
+// Support for BlinkM/CyzRgb
 //#define BLINKM

-//define PCA9632 PWM LED driver Support
+// Support for PCA9632 PWM LED driver
 //#define PCA9632

 /**
--- a/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h
+++ b/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h
@ -1106,7 +1106,7 @@
 // M500 - stores parameters in EEPROM
 // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
 // M502 - reverts to the default "factory settings".  You still need to store them in EEPROM afterwards if you want to.
-//define this to enable EEPROM support
+// Define this to enable EEPROM support
 #define EEPROM_SETTINGS

 #if ENABLED(EEPROM_SETTINGS)
@ -1629,13 +1629,13 @@
 // SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure
 //#define SF_ARC_FIX

-// Support for the BariCUDA Paste Extruder.
+// Support for the BariCUDA Paste Extruder
 //#define BARICUDA

-//define BlinkM/CyzRgb Support
+// Support for BlinkM/CyzRgb
 //#define BLINKM

-//define PCA9632 PWM LED driver Support
+// Support for PCA9632 PWM LED driver
 //#define PCA9632

 /**
--- a/Marlin/example_configurations/delta/generic/Configuration.h
+++ b/Marlin/example_configurations/delta/generic/Configuration.h
@ -1095,7 +1095,7 @@
 // M500 - stores parameters in EEPROM
 // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
 // M502 - reverts to the default "factory settings".  You still need to store them in EEPROM afterwards if you want to.
-//define this to enable EEPROM support
+// Define this to enable EEPROM support
 //#define EEPROM_SETTINGS

 #if ENABLED(EEPROM_SETTINGS)
@ -1618,13 +1618,13 @@
 // SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure
 //#define SF_ARC_FIX

-// Support for the BariCUDA Paste Extruder.
+// Support for the BariCUDA Paste Extruder
 //#define BARICUDA

-//define BlinkM/CyzRgb Support
+// Support for BlinkM/CyzRgb
 //#define BLINKM

-//define PCA9632 PWM LED driver Support
+// Support for PCA9632 PWM LED driver
 //#define PCA9632

 /**
--- a/Marlin/example_configurations/delta/kossel_mini/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_mini/Configuration.h
@ -1098,7 +1098,7 @@
 // M500 - stores parameters in EEPROM
 // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
 // M502 - reverts to the default "factory settings".  You still need to store them in EEPROM afterwards if you want to.
-//define this to enable EEPROM support
+// Define this to enable EEPROM support
 //#define EEPROM_SETTINGS

 #if ENABLED(EEPROM_SETTINGS)
@ -1621,13 +1621,13 @@
 // SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure
 //#define SF_ARC_FIX

-// Support for the BariCUDA Paste Extruder.
+// Support for the BariCUDA Paste Extruder
 //#define BARICUDA

-//define BlinkM/CyzRgb Support
+// Support for BlinkM/CyzRgb
 //#define BLINKM

-//define PCA9632 PWM LED driver Support
+// Support for PCA9632 PWM LED driver
 //#define PCA9632

 /**
--- a/Marlin/example_configurations/delta/kossel_pro/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_pro/Configuration.h
@ -1103,7 +1103,7 @@
 // M500 - stores parameters in EEPROM
 // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
 // M502 - reverts to the default "factory settings".  You still need to store them in EEPROM afterwards if you want to.
-//define this to enable EEPROM support
+// Define this to enable EEPROM support
 //#define EEPROM_SETTINGS

 #if ENABLED(EEPROM_SETTINGS)
@ -1626,13 +1626,13 @@
 // SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure
 //#define SF_ARC_FIX

-// Support for the BariCUDA Paste Extruder.
+// Support for the BariCUDA Paste Extruder
 //#define BARICUDA

-//define BlinkM/CyzRgb Support
+// Support for BlinkM/CyzRgb
 //#define BLINKM

-//define PCA9632 PWM LED driver Support
+// Support for PCA9632 PWM LED driver
 //#define PCA9632

 /**
--- a/Marlin/example_configurations/delta/kossel_xl/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_xl/Configuration.h
@ -1161,7 +1161,7 @@
 // M500 - stores parameters in EEPROM
 // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
 // M502 - reverts to the default "factory settings".  You still need to store them in EEPROM afterwards if you want to.
-//define this to enable EEPROM support
+// Define this to enable EEPROM support
 #define EEPROM_SETTINGS

 #if ENABLED(EEPROM_SETTINGS)
@ -1684,13 +1684,13 @@
 // SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure
 //#define SF_ARC_FIX

-// Support for the BariCUDA Paste Extruder.
+// Support for the BariCUDA Paste Extruder
 //#define BARICUDA

-//define BlinkM/CyzRgb Support
+// Support for BlinkM/CyzRgb
 //#define BLINKM

-//define PCA9632 PWM LED driver Support
+// Support for PCA9632 PWM LED driver
 //#define PCA9632

 /**
--- a/Marlin/example_configurations/gCreate_gMax1.5+/Configuration.h
+++ b/Marlin/example_configurations/gCreate_gMax1.5+/Configuration.h
@ -1000,7 +1000,7 @@
 // M500 - stores parameters in EEPROM
 // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
 // M502 - reverts to the default "factory settings".  You still need to store them in EEPROM afterwards if you want to.
-//define this to enable EEPROM support
+// Define this to enable EEPROM support
 #define EEPROM_SETTINGS

 #if ENABLED(EEPROM_SETTINGS)
@ -1523,13 +1523,13 @@
 // SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure
 //#define SF_ARC_FIX

-// Support for the BariCUDA Paste Extruder.
+// Support for the BariCUDA Paste Extruder
 //#define BARICUDA

-//define BlinkM/CyzRgb Support
+// Support for BlinkM/CyzRgb
 //#define BLINKM

-//define PCA9632 PWM LED driver Support
+// Support for PCA9632 PWM LED driver
 //#define PCA9632

 /**
--- a/Marlin/example_configurations/makibox/Configuration.h
+++ b/Marlin/example_configurations/makibox/Configuration.h
@ -987,7 +987,7 @@
 // M500 - stores parameters in EEPROM
 // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
 // M502 - reverts to the default "factory settings".  You still need to store them in EEPROM afterwards if you want to.
-//define this to enable EEPROM support
+// Define this to enable EEPROM support
 #define EEPROM_SETTINGS

 #if ENABLED(EEPROM_SETTINGS)
@ -1510,13 +1510,13 @@
 // SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure
 //#define SF_ARC_FIX

-// Support for the BariCUDA Paste Extruder.
+// Support for the BariCUDA Paste Extruder
 //#define BARICUDA

-//define BlinkM/CyzRgb Support
+// Support for BlinkM/CyzRgb
 //#define BLINKM

-//define PCA9632 PWM LED driver Support
+// Support for PCA9632 PWM LED driver
 //#define PCA9632

 /**
--- a/Marlin/example_configurations/tvrrug/Round2/Configuration.h
+++ b/Marlin/example_configurations/tvrrug/Round2/Configuration.h
@ -979,7 +979,7 @@
 // M500 - stores parameters in EEPROM
 // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
 // M502 - reverts to the default "factory settings".  You still need to store them in EEPROM afterwards if you want to.
-//define this to enable EEPROM support
+// Define this to enable EEPROM support
 //#define EEPROM_SETTINGS

 #if ENABLED(EEPROM_SETTINGS)
@ -1502,13 +1502,13 @@
 // SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure
 //#define SF_ARC_FIX

-// Support for the BariCUDA Paste Extruder.
+// Support for the BariCUDA Paste Extruder
 //#define BARICUDA

-//define BlinkM/CyzRgb Support
+// Support for BlinkM/CyzRgb
 //#define BLINKM

-//define PCA9632 PWM LED driver Support
+// Support for PCA9632 PWM LED driver
 //#define PCA9632

 /**
--- a/Marlin/example_configurations/wt150/Configuration.h
+++ b/Marlin/example_configurations/wt150/Configuration.h
@ -990,7 +990,7 @@
 // M500 - stores parameters in EEPROM
 // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
 // M502 - reverts to the default "factory settings".  You still need to store them in EEPROM afterwards if you want to.
-//define this to enable EEPROM support
+// Define this to enable EEPROM support
 #define EEPROM_SETTINGS

 #if ENABLED(EEPROM_SETTINGS)
@ -1513,13 +1513,13 @@
 // SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure
 //#define SF_ARC_FIX

-// Support for the BariCUDA Paste Extruder.
+// Support for the BariCUDA Paste Extruder
 //#define BARICUDA

-//define BlinkM/CyzRgb Support
+// Support for BlinkM/CyzRgb
 //#define BLINKM

-//define PCA9632 PWM LED driver Support
+// Support for PCA9632 PWM LED driver
 //#define PCA9632

 /**