From 5b03f23fa2e086cb056b6765a4824cdf3d6f7823 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Wed, 28 Jun 2017 13:44:04 -0500 Subject: [PATCH] Bring configurations up to date, fix some comments --- Marlin/Configuration.h | 18 +++++-- Marlin/Configuration_adv.h | 4 +- .../Anet/Configuration.h | 54 ++++++++++--------- .../Anet/Configuration_adv.h | 43 ++++++++------- .../CL-260/Configuration.h | 8 +-- .../Cartesio/Configuration.h | 8 +-- .../Felix/Configuration.h | 8 +-- .../Felix/DUAL/Configuration.h | 8 +-- .../FolgerTech-i3-2020/Configuration.h | 8 +-- .../Hephestos/Configuration.h | 8 +-- .../Hephestos_2/Configuration.h | 8 +-- .../K8200/Configuration.h | 8 +-- .../K8400/Configuration.h | 8 +-- .../K8400/Dual-head/Configuration.h | 8 +-- .../M150/Configuration.h | 8 +-- .../RepRapWorld/Megatronics/Configuration.h | 8 +-- .../RigidBot/Configuration.h | 8 +-- .../SCARA/Configuration.h | 8 +-- .../TAZ4/Configuration.h | 8 +-- .../TinyBoy2/Configuration.h | 8 +-- .../WITBOX/Configuration.h | 8 +-- .../adafruit/ST7565/Configuration.h | 8 +-- .../FLSUN/auto_calibrate/Configuration.h | 8 +-- .../delta/FLSUN/kossel_mini/Configuration.h | 8 +-- .../delta/generic/Configuration.h | 8 +-- .../delta/kossel_mini/Configuration.h | 8 +-- .../delta/kossel_pro/Configuration.h | 8 +-- .../delta/kossel_xl/Configuration.h | 8 +-- .../gCreate_gMax1.5+/Configuration.h | 8 +-- .../makibox/Configuration.h | 8 +-- .../tvrrug/Round2/Configuration.h | 8 +-- .../wt150/Configuration.h | 8 +-- 32 files changed, 182 insertions(+), 161 deletions(-) diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index 9295d6774..082d5a999 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -988,7 +988,7 @@ // M500 - stores parameters in EEPROM // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. -//define this to enable EEPROM support +// Define this to enable EEPROM support //#define EEPROM_SETTINGS #if ENABLED(EEPROM_SETTINGS) @@ -1392,6 +1392,16 @@ // //#define BQ_LCD_SMART_CONTROLLER +// +// ANET_10 Controller supported displays. +// +//#define ANET_KEYPAD_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. + // This LCD is known to be susceptible to electrical interference + // which scrambles the display. Pressing any button clears it up. +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + // // CONTROLLER TYPE: I2C // @@ -1501,13 +1511,13 @@ // SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure //#define SF_ARC_FIX -// Support for the BariCUDA Paste Extruder. +// Support for the BariCUDA Paste Extruder //#define BARICUDA -//define BlinkM/CyzRgb Support +// Support for BlinkM/CyzRgb //#define BLINKM -//define PCA9632 PWM LED driver Support +// Support for PCA9632 PWM LED driver //#define PCA9632 /** diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h index 08d30b58e..e68c48563 100644 --- a/Marlin/Configuration_adv.h +++ b/Marlin/Configuration_adv.h @@ -123,8 +123,8 @@ #define AUTOTEMP_OLDWEIGHT 0.98 #endif -//Show Temperature ADC value -//The M105 command return, besides traditional information, the ADC value read from temperature sensors. +// Show Temperature ADC value +// Enable for M105 to include ADC values read from temperature sensors. //#define SHOW_TEMP_ADC_VALUES /** diff --git a/Marlin/example_configurations/Anet/Configuration.h b/Marlin/example_configurations/Anet/Configuration.h index 042ab7339..11519ab03 100644 --- a/Marlin/example_configurations/Anet/Configuration.h +++ b/Marlin/example_configurations/Anet/Configuration.h @@ -58,15 +58,15 @@ //=========================================================================== //============================= DELTA Printer =============================== //=========================================================================== -// For a Delta printer replace the configuration files with the files in the -// example_configurations/delta directory. +// For a Delta printer start with one of the configuration files in the +// example_configurations/delta directory and customize for your machine. // //=========================================================================== //============================= SCARA Printer =============================== //=========================================================================== -// For a Scara printer replace the configuration files with the files in the -// example_configurations/SCARA directory. +// For a SCARA printer start with the configuration files in +// example_configurations/SCARA and customize for your machine. // // @section info @@ -161,7 +161,10 @@ //#define SWITCHING_EXTRUDER #if ENABLED(SWITCHING_EXTRUDER) #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 + #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] + #if EXTRUDERS > 3 + #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 + #endif #endif // A dual-nozzle that uses a servomotor to raise/lower one of the nozzles @@ -512,14 +515,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT {100, 100, 400, 95} +#define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 400, 95 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] */ -#define DEFAULT_MAX_FEEDRATE {400, 400, 8, 50} +#define DEFAULT_MAX_FEEDRATE { 400, 400, 8, 50 } /** * Default Max Acceleration (change/s) change = mm/s @@ -527,7 +530,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] */ -#define DEFAULT_MAX_ACCELERATION {2000, 2000, 100, 10000} +#define DEFAULT_MAX_ACCELERATION { 2000, 2000, 100, 10000 } /** * Default Acceleration (change/s) change = mm/s @@ -596,7 +599,7 @@ * Probe Type * * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. + * You must activate one of these to use Auto Bed Leveling below. */ /** @@ -991,7 +994,7 @@ // M500 - stores parameters in EEPROM // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. -//define this to enable EEPROM support +// Define this to enable EEPROM support #define EEPROM_SETTINGS #if ENABLED(EEPROM_SETTINGS) @@ -1307,6 +1310,12 @@ // //#define ULTIPANEL +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + // // PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) // http://reprap.org/wiki/PanelOne @@ -1391,12 +1400,6 @@ // //#define BQ_LCD_SMART_CONTROLLER -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - // // ANET_10 Controller supported displays. // @@ -1423,6 +1426,9 @@ // // Sainsmart YW Robot (LCM1602) LCD Display // +// Note: This controller requires F.Malpartida's LiquidCrystal_I2C library +// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// //#define LCD_I2C_SAINSMART_YWROBOT // @@ -1453,11 +1459,6 @@ // //#define U8GLIB_SSD1306 -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - // // SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules // @@ -1475,6 +1476,11 @@ // //#define SAV_3DLCD +// +// TinyBoy2 128x64 OLED / Encoder Panel +// +//#define OLED_PANEL_TINYBOY2 + //============================================================================= //=============================== Extra Features ============================== //============================================================================= @@ -1513,13 +1519,13 @@ // SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure //#define SF_ARC_FIX -// Support for the BariCUDA Paste Extruder. +// Support for the BariCUDA Paste Extruder //#define BARICUDA -//define BlinkM/CyzRgb Support +// Support for BlinkM/CyzRgb //#define BLINKM -//define PCA9632 PWM LED driver Support +// Support for PCA9632 PWM LED driver //#define PCA9632 /** diff --git a/Marlin/example_configurations/Anet/Configuration_adv.h b/Marlin/example_configurations/Anet/Configuration_adv.h index d41f1d208..cc72206cf 100644 --- a/Marlin/example_configurations/Anet/Configuration_adv.h +++ b/Marlin/example_configurations/Anet/Configuration_adv.h @@ -225,13 +225,11 @@ */ //#define CASE_LIGHT_ENABLE #if ENABLED(CASE_LIGHT_ENABLE) - #define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board - // pins_XXX.h file overrides this one - #define INVERT_CASE_LIGHT false // set to true if case light is ON when pin is at 0 - #define CASE_LIGHT_DEFAULT_ON true // set default power up state to on or off - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // set power up brightness 0-255 ( only used if on PWM - // and if CASE_LIGHT_DEFAULT is set to on - //#define MENU_ITEM_CASE_LIGHT // Uncomment to have a Case Light entry in main menu + //#define CASE_LIGHT_PIN 4 // Override the default pin if needed + #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW + #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on + #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) + //#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu #endif //=========================================================================== @@ -421,16 +419,16 @@ * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 */ -//#define PWM_MOTOR_CURRENT {1300, 1300, 1250} // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis +//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps +//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) +//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis // Uncomment to enable an I2C based DIGIPOT like on the Azteeg X3 Pro //#define DIGIPOT_I2C //#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster #define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 // Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS -#define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0} // AZTEEG_X3_PRO +#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO //=========================================================================== //=============================Additional Features=========================== @@ -680,10 +678,16 @@ // @section extras -// Arc interpretation settings: -//#define ARC_SUPPORT // Disabling this saves ~2738 bytes -#define MM_PER_ARC_SEGMENT 1 -#define N_ARC_CORRECTION 25 +// +// G2/G3 Arc Support +// +//#define ARC_SUPPORT // Disable this feature to save ~3226 bytes +#if ENABLED(ARC_SUPPORT) + #define MM_PER_ARC_SEGMENT 1 // Length of each arc segment + #define N_ARC_CORRECTION 25 // Number of intertpolated segments between corrections + //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles + //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes +#endif // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. //#define BEZIER_CURVE_SUPPORT @@ -809,6 +813,7 @@ #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable to have stepper motors hold position during filament change // even if it takes longer than DEFAULT_STEPPER_DEACTIVE_TIME. //#define PARK_HEAD_ON_PAUSE // Go to filament change position on pause, return to print position on resume + //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change #endif // @section tmc @@ -1201,12 +1206,12 @@ /** * Auto-report temperatures with M155 S */ -//#define AUTO_REPORT_TEMPERATURES +#define AUTO_REPORT_TEMPERATURES /** * Include capabilities in M115 output */ -//#define EXTENDED_CAPABILITIES_REPORT +#define EXTENDED_CAPABILITIES_REPORT /** * Volumetric extrusion default state @@ -1264,7 +1269,7 @@ #endif //=========================================================================== -//============================ I2C Encoder Settings ========================= +//====================== I2C Position Encoder Settings ====================== //=========================================================================== /** * I2C position encoders for closed loop control. @@ -1344,6 +1349,6 @@ // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. #define I2CPE_ERR_ROLLING_AVERAGE -#endif +#endif // I2C_POSITION_ENCODERS #endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/CL-260/Configuration.h b/Marlin/example_configurations/CL-260/Configuration.h index 545220f80..a8cad55df 100644 --- a/Marlin/example_configurations/CL-260/Configuration.h +++ b/Marlin/example_configurations/CL-260/Configuration.h @@ -985,7 +985,7 @@ // M500 - stores parameters in EEPROM // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. -//define this to enable EEPROM support +// Define this to enable EEPROM support //#define EEPROM_SETTINGS #if ENABLED(EEPROM_SETTINGS) @@ -1508,13 +1508,13 @@ // SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure //#define SF_ARC_FIX -// Support for the BariCUDA Paste Extruder. +// Support for the BariCUDA Paste Extruder //#define BARICUDA -//define BlinkM/CyzRgb Support +// Support for BlinkM/CyzRgb //#define BLINKM -//define PCA9632 PWM LED driver Support +// Support for PCA9632 PWM LED driver //#define PCA9632 /** diff --git a/Marlin/example_configurations/Cartesio/Configuration.h b/Marlin/example_configurations/Cartesio/Configuration.h index 10d1f84ea..ac543164c 100644 --- a/Marlin/example_configurations/Cartesio/Configuration.h +++ b/Marlin/example_configurations/Cartesio/Configuration.h @@ -982,7 +982,7 @@ // M500 - stores parameters in EEPROM // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. -//define this to enable EEPROM support +// Define this to enable EEPROM support //#define EEPROM_SETTINGS #if ENABLED(EEPROM_SETTINGS) @@ -1505,13 +1505,13 @@ // SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure //#define SF_ARC_FIX -// Support for the BariCUDA Paste Extruder. +// Support for the BariCUDA Paste Extruder //#define BARICUDA -//define BlinkM/CyzRgb Support +// Support for BlinkM/CyzRgb //#define BLINKM -//define PCA9632 PWM LED driver Support +// Support for PCA9632 PWM LED driver //#define PCA9632 /** diff --git a/Marlin/example_configurations/Felix/Configuration.h b/Marlin/example_configurations/Felix/Configuration.h index 7ca6e17f3..a7dcb118c 100644 --- a/Marlin/example_configurations/Felix/Configuration.h +++ b/Marlin/example_configurations/Felix/Configuration.h @@ -966,7 +966,7 @@ // M500 - stores parameters in EEPROM // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. -//define this to enable EEPROM support +// Define this to enable EEPROM support //#define EEPROM_SETTINGS #if ENABLED(EEPROM_SETTINGS) @@ -1489,13 +1489,13 @@ // SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure //#define SF_ARC_FIX -// Support for the BariCUDA Paste Extruder. +// Support for the BariCUDA Paste Extruder //#define BARICUDA -//define BlinkM/CyzRgb Support +// Support for BlinkM/CyzRgb //#define BLINKM -//define PCA9632 PWM LED driver Support +// Support for PCA9632 PWM LED driver //#define PCA9632 /** diff --git a/Marlin/example_configurations/Felix/DUAL/Configuration.h b/Marlin/example_configurations/Felix/DUAL/Configuration.h index af9b9aa49..7904e3cc5 100644 --- a/Marlin/example_configurations/Felix/DUAL/Configuration.h +++ b/Marlin/example_configurations/Felix/DUAL/Configuration.h @@ -966,7 +966,7 @@ // M500 - stores parameters in EEPROM // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. -//define this to enable EEPROM support +// Define this to enable EEPROM support //#define EEPROM_SETTINGS #if ENABLED(EEPROM_SETTINGS) @@ -1489,13 +1489,13 @@ // SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure //#define SF_ARC_FIX -// Support for the BariCUDA Paste Extruder. +// Support for the BariCUDA Paste Extruder //#define BARICUDA -//define BlinkM/CyzRgb Support +// Support for BlinkM/CyzRgb //#define BLINKM -//define PCA9632 PWM LED driver Support +// Support for PCA9632 PWM LED driver //#define PCA9632 /** diff --git a/Marlin/example_configurations/FolgerTech-i3-2020/Configuration.h b/Marlin/example_configurations/FolgerTech-i3-2020/Configuration.h index a7db519e0..36ff1f2b4 100644 --- a/Marlin/example_configurations/FolgerTech-i3-2020/Configuration.h +++ b/Marlin/example_configurations/FolgerTech-i3-2020/Configuration.h @@ -988,7 +988,7 @@ // M500 - stores parameters in EEPROM // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. -//define this to enable EEPROM support +// Define this to enable EEPROM support #define EEPROM_SETTINGS #if ENABLED(EEPROM_SETTINGS) @@ -1511,13 +1511,13 @@ // SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure //#define SF_ARC_FIX -// Support for the BariCUDA Paste Extruder. +// Support for the BariCUDA Paste Extruder //#define BARICUDA -//define BlinkM/CyzRgb Support +// Support for BlinkM/CyzRgb //#define BLINKM -//define PCA9632 PWM LED driver Support +// Support for PCA9632 PWM LED driver //#define PCA9632 /** diff --git a/Marlin/example_configurations/Hephestos/Configuration.h b/Marlin/example_configurations/Hephestos/Configuration.h index cd2cf20c2..dfa01e944 100644 --- a/Marlin/example_configurations/Hephestos/Configuration.h +++ b/Marlin/example_configurations/Hephestos/Configuration.h @@ -974,7 +974,7 @@ // M500 - stores parameters in EEPROM // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. -//define this to enable EEPROM support +// Define this to enable EEPROM support //#define EEPROM_SETTINGS #if ENABLED(EEPROM_SETTINGS) @@ -1497,13 +1497,13 @@ // SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure //#define SF_ARC_FIX -// Support for the BariCUDA Paste Extruder. +// Support for the BariCUDA Paste Extruder //#define BARICUDA -//define BlinkM/CyzRgb Support +// Support for BlinkM/CyzRgb //#define BLINKM -//define PCA9632 PWM LED driver Support +// Support for PCA9632 PWM LED driver //#define PCA9632 /** diff --git a/Marlin/example_configurations/Hephestos_2/Configuration.h b/Marlin/example_configurations/Hephestos_2/Configuration.h index de69aeb06..63767298e 100644 --- a/Marlin/example_configurations/Hephestos_2/Configuration.h +++ b/Marlin/example_configurations/Hephestos_2/Configuration.h @@ -977,7 +977,7 @@ // M500 - stores parameters in EEPROM // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. -//define this to enable EEPROM support +// Define this to enable EEPROM support #define EEPROM_SETTINGS #if ENABLED(EEPROM_SETTINGS) @@ -1500,13 +1500,13 @@ // SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure //#define SF_ARC_FIX -// Support for the BariCUDA Paste Extruder. +// Support for the BariCUDA Paste Extruder //#define BARICUDA -//define BlinkM/CyzRgb Support +// Support for BlinkM/CyzRgb //#define BLINKM -//define PCA9632 PWM LED driver Support +// Support for PCA9632 PWM LED driver //#define PCA9632 /** diff --git a/Marlin/example_configurations/K8200/Configuration.h b/Marlin/example_configurations/K8200/Configuration.h index c6b5521f9..4ecaf9c8c 100644 --- a/Marlin/example_configurations/K8200/Configuration.h +++ b/Marlin/example_configurations/K8200/Configuration.h @@ -1013,7 +1013,7 @@ // M500 - stores parameters in EEPROM // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. -//define this to enable EEPROM support +// Define this to enable EEPROM support #define EEPROM_SETTINGS // K8200: uses EEPROM by default #if ENABLED(EEPROM_SETTINGS) @@ -1546,13 +1546,13 @@ // SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure //#define SF_ARC_FIX -// Support for the BariCUDA Paste Extruder. +// Support for the BariCUDA Paste Extruder //#define BARICUDA -//define BlinkM/CyzRgb Support +// Support for BlinkM/CyzRgb //#define BLINKM -//define PCA9632 PWM LED driver Support +// Support for PCA9632 PWM LED driver //#define PCA9632 /** diff --git a/Marlin/example_configurations/K8400/Configuration.h b/Marlin/example_configurations/K8400/Configuration.h index 53624af67..c7b0db6b3 100644 --- a/Marlin/example_configurations/K8400/Configuration.h +++ b/Marlin/example_configurations/K8400/Configuration.h @@ -984,7 +984,7 @@ // M500 - stores parameters in EEPROM // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. -//define this to enable EEPROM support +// Define this to enable EEPROM support #define EEPROM_SETTINGS #if ENABLED(EEPROM_SETTINGS) @@ -1507,13 +1507,13 @@ // SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure //#define SF_ARC_FIX -// Support for the BariCUDA Paste Extruder. +// Support for the BariCUDA Paste Extruder //#define BARICUDA -//define BlinkM/CyzRgb Support +// Support for BlinkM/CyzRgb //#define BLINKM -//define PCA9632 PWM LED driver Support +// Support for PCA9632 PWM LED driver //#define PCA9632 /** diff --git a/Marlin/example_configurations/K8400/Dual-head/Configuration.h b/Marlin/example_configurations/K8400/Dual-head/Configuration.h index 975997a77..68359941d 100644 --- a/Marlin/example_configurations/K8400/Dual-head/Configuration.h +++ b/Marlin/example_configurations/K8400/Dual-head/Configuration.h @@ -984,7 +984,7 @@ // M500 - stores parameters in EEPROM // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. -//define this to enable EEPROM support +// Define this to enable EEPROM support #define EEPROM_SETTINGS #if ENABLED(EEPROM_SETTINGS) @@ -1507,13 +1507,13 @@ // SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure //#define SF_ARC_FIX -// Support for the BariCUDA Paste Extruder. +// Support for the BariCUDA Paste Extruder //#define BARICUDA -//define BlinkM/CyzRgb Support +// Support for BlinkM/CyzRgb //#define BLINKM -//define PCA9632 PWM LED driver Support +// Support for PCA9632 PWM LED driver //#define PCA9632 /** diff --git a/Marlin/example_configurations/M150/Configuration.h b/Marlin/example_configurations/M150/Configuration.h index d73fd6c40..c8043291a 100644 --- a/Marlin/example_configurations/M150/Configuration.h +++ b/Marlin/example_configurations/M150/Configuration.h @@ -1011,7 +1011,7 @@ // M500 - stores parameters in EEPROM // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. -//define this to enable EEPROM support +// Define this to enable EEPROM support #define EEPROM_SETTINGS #if ENABLED(EEPROM_SETTINGS) @@ -1534,13 +1534,13 @@ // SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure //#define SF_ARC_FIX -// Support for the BariCUDA Paste Extruder. +// Support for the BariCUDA Paste Extruder //#define BARICUDA -//define BlinkM/CyzRgb Support +// Support for BlinkM/CyzRgb //#define BLINKM -//define PCA9632 PWM LED driver Support +// Support for PCA9632 PWM LED driver //#define PCA9632 /** diff --git a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h index 201a3d2e4..e3a159955 100644 --- a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h +++ b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h @@ -984,7 +984,7 @@ // M500 - stores parameters in EEPROM // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. -//define this to enable EEPROM support +// Define this to enable EEPROM support //#define EEPROM_SETTINGS #if ENABLED(EEPROM_SETTINGS) @@ -1507,13 +1507,13 @@ // SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure //#define SF_ARC_FIX -// Support for the BariCUDA Paste Extruder. +// Support for the BariCUDA Paste Extruder //#define BARICUDA -//define BlinkM/CyzRgb Support +// Support for BlinkM/CyzRgb //#define BLINKM -//define PCA9632 PWM LED driver Support +// Support for PCA9632 PWM LED driver //#define PCA9632 /** diff --git a/Marlin/example_configurations/RigidBot/Configuration.h b/Marlin/example_configurations/RigidBot/Configuration.h index 158d42fbd..5473a3207 100644 --- a/Marlin/example_configurations/RigidBot/Configuration.h +++ b/Marlin/example_configurations/RigidBot/Configuration.h @@ -982,7 +982,7 @@ // M500 - stores parameters in EEPROM // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. -//define this to enable EEPROM support +// Define this to enable EEPROM support #define EEPROM_SETTINGS #if ENABLED(EEPROM_SETTINGS) @@ -1507,13 +1507,13 @@ // SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure //#define SF_ARC_FIX -// Support for the BariCUDA Paste Extruder. +// Support for the BariCUDA Paste Extruder //#define BARICUDA -//define BlinkM/CyzRgb Support +// Support for BlinkM/CyzRgb //#define BLINKM -//define PCA9632 PWM LED driver Support +// Support for PCA9632 PWM LED driver //#define PCA9632 /** diff --git a/Marlin/example_configurations/SCARA/Configuration.h b/Marlin/example_configurations/SCARA/Configuration.h index 3a32e80fc..d6a97d72e 100644 --- a/Marlin/example_configurations/SCARA/Configuration.h +++ b/Marlin/example_configurations/SCARA/Configuration.h @@ -996,7 +996,7 @@ // M500 - stores parameters in EEPROM // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. -//define this to enable EEPROM support +// Define this to enable EEPROM support //#define EEPROM_SETTINGS #if ENABLED(EEPROM_SETTINGS) @@ -1519,13 +1519,13 @@ // SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure //#define SF_ARC_FIX -// Support for the BariCUDA Paste Extruder. +// Support for the BariCUDA Paste Extruder //#define BARICUDA -//define BlinkM/CyzRgb Support +// Support for BlinkM/CyzRgb //#define BLINKM -//define PCA9632 PWM LED driver Support +// Support for PCA9632 PWM LED driver //#define PCA9632 /** diff --git a/Marlin/example_configurations/TAZ4/Configuration.h b/Marlin/example_configurations/TAZ4/Configuration.h index 1414d0cca..bdf7d9419 100644 --- a/Marlin/example_configurations/TAZ4/Configuration.h +++ b/Marlin/example_configurations/TAZ4/Configuration.h @@ -1003,7 +1003,7 @@ // M500 - stores parameters in EEPROM // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. -//define this to enable EEPROM support +// Define this to enable EEPROM support #define EEPROM_SETTINGS #if ENABLED(EEPROM_SETTINGS) @@ -1526,13 +1526,13 @@ // SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure //#define SF_ARC_FIX -// Support for the BariCUDA Paste Extruder. +// Support for the BariCUDA Paste Extruder //#define BARICUDA -//define BlinkM/CyzRgb Support +// Support for BlinkM/CyzRgb //#define BLINKM -//define PCA9632 PWM LED driver Support +// Support for PCA9632 PWM LED driver //#define PCA9632 /** diff --git a/Marlin/example_configurations/TinyBoy2/Configuration.h b/Marlin/example_configurations/TinyBoy2/Configuration.h index 5ded991e5..b3f58f0cb 100644 --- a/Marlin/example_configurations/TinyBoy2/Configuration.h +++ b/Marlin/example_configurations/TinyBoy2/Configuration.h @@ -1040,7 +1040,7 @@ // M500 - stores parameters in EEPROM // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. -//define this to enable EEPROM support +// Define this to enable EEPROM support #define EEPROM_SETTINGS #if ENABLED(EEPROM_SETTINGS) @@ -1568,13 +1568,13 @@ // SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure //#define SF_ARC_FIX -// Support for the BariCUDA Paste Extruder. +// Support for the BariCUDA Paste Extruder //#define BARICUDA -//define BlinkM/CyzRgb Support +// Support for BlinkM/CyzRgb //#define BLINKM -//define PCA9632 PWM LED driver Support +// Support for PCA9632 PWM LED driver //#define PCA9632 /** diff --git a/Marlin/example_configurations/WITBOX/Configuration.h b/Marlin/example_configurations/WITBOX/Configuration.h index 53b2506eb..cb280b344 100644 --- a/Marlin/example_configurations/WITBOX/Configuration.h +++ b/Marlin/example_configurations/WITBOX/Configuration.h @@ -974,7 +974,7 @@ // M500 - stores parameters in EEPROM // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. -//define this to enable EEPROM support +// Define this to enable EEPROM support //#define EEPROM_SETTINGS #if ENABLED(EEPROM_SETTINGS) @@ -1497,13 +1497,13 @@ // SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure //#define SF_ARC_FIX -// Support for the BariCUDA Paste Extruder. +// Support for the BariCUDA Paste Extruder //#define BARICUDA -//define BlinkM/CyzRgb Support +// Support for BlinkM/CyzRgb //#define BLINKM -//define PCA9632 PWM LED driver Support +// Support for PCA9632 PWM LED driver //#define PCA9632 /** diff --git a/Marlin/example_configurations/adafruit/ST7565/Configuration.h b/Marlin/example_configurations/adafruit/ST7565/Configuration.h index 245675fba..3b3cb2c4c 100644 --- a/Marlin/example_configurations/adafruit/ST7565/Configuration.h +++ b/Marlin/example_configurations/adafruit/ST7565/Configuration.h @@ -984,7 +984,7 @@ // M500 - stores parameters in EEPROM // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. -//define this to enable EEPROM support +// Define this to enable EEPROM support //#define EEPROM_SETTINGS #if ENABLED(EEPROM_SETTINGS) @@ -1507,13 +1507,13 @@ // SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure //#define SF_ARC_FIX -// Support for the BariCUDA Paste Extruder. +// Support for the BariCUDA Paste Extruder //#define BARICUDA -//define BlinkM/CyzRgb Support +// Support for BlinkM/CyzRgb //#define BLINKM -//define PCA9632 PWM LED driver Support +// Support for PCA9632 PWM LED driver //#define PCA9632 /** diff --git a/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration.h b/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration.h index 18bdac872..8426456df 100644 --- a/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration.h +++ b/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration.h @@ -1104,7 +1104,7 @@ // M500 - stores parameters in EEPROM // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. -//define this to enable EEPROM support +// Define this to enable EEPROM support #define EEPROM_SETTINGS #if ENABLED(EEPROM_SETTINGS) @@ -1628,13 +1628,13 @@ // SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure //#define SF_ARC_FIX -// Support for the BariCUDA Paste Extruder. +// Support for the BariCUDA Paste Extruder //#define BARICUDA -//define BlinkM/CyzRgb Support +// Support for BlinkM/CyzRgb //#define BLINKM -//define PCA9632 PWM LED driver Support +// Support for PCA9632 PWM LED driver //#define PCA9632 /** diff --git a/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h b/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h index 5dde5f487..97ea09ca8 100644 --- a/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h +++ b/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h @@ -1106,7 +1106,7 @@ // M500 - stores parameters in EEPROM // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. -//define this to enable EEPROM support +// Define this to enable EEPROM support #define EEPROM_SETTINGS #if ENABLED(EEPROM_SETTINGS) @@ -1629,13 +1629,13 @@ // SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure //#define SF_ARC_FIX -// Support for the BariCUDA Paste Extruder. +// Support for the BariCUDA Paste Extruder //#define BARICUDA -//define BlinkM/CyzRgb Support +// Support for BlinkM/CyzRgb //#define BLINKM -//define PCA9632 PWM LED driver Support +// Support for PCA9632 PWM LED driver //#define PCA9632 /** diff --git a/Marlin/example_configurations/delta/generic/Configuration.h b/Marlin/example_configurations/delta/generic/Configuration.h index f13de9116..2bc238b84 100644 --- a/Marlin/example_configurations/delta/generic/Configuration.h +++ b/Marlin/example_configurations/delta/generic/Configuration.h @@ -1095,7 +1095,7 @@ // M500 - stores parameters in EEPROM // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. -//define this to enable EEPROM support +// Define this to enable EEPROM support //#define EEPROM_SETTINGS #if ENABLED(EEPROM_SETTINGS) @@ -1618,13 +1618,13 @@ // SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure //#define SF_ARC_FIX -// Support for the BariCUDA Paste Extruder. +// Support for the BariCUDA Paste Extruder //#define BARICUDA -//define BlinkM/CyzRgb Support +// Support for BlinkM/CyzRgb //#define BLINKM -//define PCA9632 PWM LED driver Support +// Support for PCA9632 PWM LED driver //#define PCA9632 /** diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration.h b/Marlin/example_configurations/delta/kossel_mini/Configuration.h index c4ed97e7c..d2a21e3c9 100644 --- a/Marlin/example_configurations/delta/kossel_mini/Configuration.h +++ b/Marlin/example_configurations/delta/kossel_mini/Configuration.h @@ -1098,7 +1098,7 @@ // M500 - stores parameters in EEPROM // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. -//define this to enable EEPROM support +// Define this to enable EEPROM support //#define EEPROM_SETTINGS #if ENABLED(EEPROM_SETTINGS) @@ -1621,13 +1621,13 @@ // SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure //#define SF_ARC_FIX -// Support for the BariCUDA Paste Extruder. +// Support for the BariCUDA Paste Extruder //#define BARICUDA -//define BlinkM/CyzRgb Support +// Support for BlinkM/CyzRgb //#define BLINKM -//define PCA9632 PWM LED driver Support +// Support for PCA9632 PWM LED driver //#define PCA9632 /** diff --git a/Marlin/example_configurations/delta/kossel_pro/Configuration.h b/Marlin/example_configurations/delta/kossel_pro/Configuration.h index d53d1aa23..d321556c0 100644 --- a/Marlin/example_configurations/delta/kossel_pro/Configuration.h +++ b/Marlin/example_configurations/delta/kossel_pro/Configuration.h @@ -1103,7 +1103,7 @@ // M500 - stores parameters in EEPROM // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. -//define this to enable EEPROM support +// Define this to enable EEPROM support //#define EEPROM_SETTINGS #if ENABLED(EEPROM_SETTINGS) @@ -1626,13 +1626,13 @@ // SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure //#define SF_ARC_FIX -// Support for the BariCUDA Paste Extruder. +// Support for the BariCUDA Paste Extruder //#define BARICUDA -//define BlinkM/CyzRgb Support +// Support for BlinkM/CyzRgb //#define BLINKM -//define PCA9632 PWM LED driver Support +// Support for PCA9632 PWM LED driver //#define PCA9632 /** diff --git a/Marlin/example_configurations/delta/kossel_xl/Configuration.h b/Marlin/example_configurations/delta/kossel_xl/Configuration.h index 9fbd10b94..d9071e3f1 100644 --- a/Marlin/example_configurations/delta/kossel_xl/Configuration.h +++ b/Marlin/example_configurations/delta/kossel_xl/Configuration.h @@ -1161,7 +1161,7 @@ // M500 - stores parameters in EEPROM // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. -//define this to enable EEPROM support +// Define this to enable EEPROM support #define EEPROM_SETTINGS #if ENABLED(EEPROM_SETTINGS) @@ -1684,13 +1684,13 @@ // SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure //#define SF_ARC_FIX -// Support for the BariCUDA Paste Extruder. +// Support for the BariCUDA Paste Extruder //#define BARICUDA -//define BlinkM/CyzRgb Support +// Support for BlinkM/CyzRgb //#define BLINKM -//define PCA9632 PWM LED driver Support +// Support for PCA9632 PWM LED driver //#define PCA9632 /** diff --git a/Marlin/example_configurations/gCreate_gMax1.5+/Configuration.h b/Marlin/example_configurations/gCreate_gMax1.5+/Configuration.h index 03b4f2440..727d5ac43 100644 --- a/Marlin/example_configurations/gCreate_gMax1.5+/Configuration.h +++ b/Marlin/example_configurations/gCreate_gMax1.5+/Configuration.h @@ -1000,7 +1000,7 @@ // M500 - stores parameters in EEPROM // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. -//define this to enable EEPROM support +// Define this to enable EEPROM support #define EEPROM_SETTINGS #if ENABLED(EEPROM_SETTINGS) @@ -1523,13 +1523,13 @@ // SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure //#define SF_ARC_FIX -// Support for the BariCUDA Paste Extruder. +// Support for the BariCUDA Paste Extruder //#define BARICUDA -//define BlinkM/CyzRgb Support +// Support for BlinkM/CyzRgb //#define BLINKM -//define PCA9632 PWM LED driver Support +// Support for PCA9632 PWM LED driver //#define PCA9632 /** diff --git a/Marlin/example_configurations/makibox/Configuration.h b/Marlin/example_configurations/makibox/Configuration.h index 6fe07aa24..3580a15eb 100644 --- a/Marlin/example_configurations/makibox/Configuration.h +++ b/Marlin/example_configurations/makibox/Configuration.h @@ -987,7 +987,7 @@ // M500 - stores parameters in EEPROM // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. -//define this to enable EEPROM support +// Define this to enable EEPROM support #define EEPROM_SETTINGS #if ENABLED(EEPROM_SETTINGS) @@ -1510,13 +1510,13 @@ // SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure //#define SF_ARC_FIX -// Support for the BariCUDA Paste Extruder. +// Support for the BariCUDA Paste Extruder //#define BARICUDA -//define BlinkM/CyzRgb Support +// Support for BlinkM/CyzRgb //#define BLINKM -//define PCA9632 PWM LED driver Support +// Support for PCA9632 PWM LED driver //#define PCA9632 /** diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration.h b/Marlin/example_configurations/tvrrug/Round2/Configuration.h index 015a0d327..1eb267ccf 100644 --- a/Marlin/example_configurations/tvrrug/Round2/Configuration.h +++ b/Marlin/example_configurations/tvrrug/Round2/Configuration.h @@ -979,7 +979,7 @@ // M500 - stores parameters in EEPROM // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. -//define this to enable EEPROM support +// Define this to enable EEPROM support //#define EEPROM_SETTINGS #if ENABLED(EEPROM_SETTINGS) @@ -1502,13 +1502,13 @@ // SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure //#define SF_ARC_FIX -// Support for the BariCUDA Paste Extruder. +// Support for the BariCUDA Paste Extruder //#define BARICUDA -//define BlinkM/CyzRgb Support +// Support for BlinkM/CyzRgb //#define BLINKM -//define PCA9632 PWM LED driver Support +// Support for PCA9632 PWM LED driver //#define PCA9632 /** diff --git a/Marlin/example_configurations/wt150/Configuration.h b/Marlin/example_configurations/wt150/Configuration.h index 717b0b205..cc324f83e 100644 --- a/Marlin/example_configurations/wt150/Configuration.h +++ b/Marlin/example_configurations/wt150/Configuration.h @@ -990,7 +990,7 @@ // M500 - stores parameters in EEPROM // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. -//define this to enable EEPROM support +// Define this to enable EEPROM support #define EEPROM_SETTINGS #if ENABLED(EEPROM_SETTINGS) @@ -1513,13 +1513,13 @@ // SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure //#define SF_ARC_FIX -// Support for the BariCUDA Paste Extruder. +// Support for the BariCUDA Paste Extruder //#define BARICUDA -//define BlinkM/CyzRgb Support +// Support for BlinkM/CyzRgb //#define BLINKM -//define PCA9632 PWM LED driver Support +// Support for PCA9632 PWM LED driver //#define PCA9632 /**