Add links to Junction Deviation heading (#14272)

5 years ago · 4b9f6d531b
parent ced30b1054
commit 4b9f6d531b
101 changed files with 909 additions and 303 deletions
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@ -731,9 +731,15 @@
 #define DEFAULT_RETRACT_ACCELERATION  3000    // E acceleration for retracts
 #define DEFAULT_TRAVEL_ACCELERATION   3000    // X, Y, Z acceleration for travel (non printing) moves
-//
+/**
-// Use Junction Deviation instead of traditional Jerk Limiting
+ * Junction Deviation
-//
+ *
 * Use Junction Deviation instead of traditional Jerk Limiting
 *
 * See:
 *   https://reprap.org/forum/read.php?1,739819
 *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 //#define JUNCTION_DEVIATION
 #if ENABLED(JUNCTION_DEVIATION)
  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
--- a/config/default/Configuration.h
+++ b/config/default/Configuration.h
@ -731,9 +731,15 @@
 #define DEFAULT_RETRACT_ACCELERATION  3000    // E acceleration for retracts
 #define DEFAULT_TRAVEL_ACCELERATION   3000    // X, Y, Z acceleration for travel (non printing) moves
-//
+/**
-// Use Junction Deviation instead of traditional Jerk Limiting
+ * Junction Deviation
-//
+ *
 * Use Junction Deviation instead of traditional Jerk Limiting
 *
 * See:
 *   https://reprap.org/forum/read.php?1,739819
 *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 //#define JUNCTION_DEVIATION
 #if ENABLED(JUNCTION_DEVIATION)
  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
--- a/config/examples/3DFabXYZ/Migbot/Configuration.h
+++ b/config/examples/3DFabXYZ/Migbot/Configuration.h
@ -737,9 +737,15 @@
 #define DEFAULT_RETRACT_ACCELERATION  3000    // E acceleration for retracts
 #define DEFAULT_TRAVEL_ACCELERATION   1590    // X, Y, Z acceleration for travel (non printing) moves
-//
+/**
-// Use Junction Deviation instead of traditional Jerk Limiting
+ * Junction Deviation
-//
+ *
 * Use Junction Deviation instead of traditional Jerk Limiting
 *
 * See:
 *   https://reprap.org/forum/read.php?1,739819
 *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 //#define JUNCTION_DEVIATION
 #if ENABLED(JUNCTION_DEVIATION)
  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
--- a/config/examples/AlephObjects/TAZ4/Configuration.h
+++ b/config/examples/AlephObjects/TAZ4/Configuration.h
@ -751,9 +751,15 @@
 #define DEFAULT_RETRACT_ACCELERATION  3000    // E acceleration for retracts
 #define DEFAULT_TRAVEL_ACCELERATION   3000    // X, Y, Z acceleration for travel (non printing) moves
-//
+/**
-// Use Junction Deviation instead of traditional Jerk Limiting
+ * Junction Deviation
-//
+ *
 * Use Junction Deviation instead of traditional Jerk Limiting
 *
 * See:
 *   https://reprap.org/forum/read.php?1,739819
 *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 //#define JUNCTION_DEVIATION
 #if ENABLED(JUNCTION_DEVIATION)
  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
--- a/config/examples/AliExpress/CL-260/Configuration.h
+++ b/config/examples/AliExpress/CL-260/Configuration.h
@ -731,9 +731,15 @@
 #define DEFAULT_RETRACT_ACCELERATION  3000    // E acceleration for retracts
 #define DEFAULT_TRAVEL_ACCELERATION   3000    // X, Y, Z acceleration for travel (non printing) moves
-//
+/**
-// Use Junction Deviation instead of traditional Jerk Limiting
+ * Junction Deviation
-//
+ *
 * Use Junction Deviation instead of traditional Jerk Limiting
 *
 * See:
 *   https://reprap.org/forum/read.php?1,739819
 *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 //#define JUNCTION_DEVIATION
 #if ENABLED(JUNCTION_DEVIATION)
  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
--- a/config/examples/AliExpress/UM2pExt/Configuration.h
+++ b/config/examples/AliExpress/UM2pExt/Configuration.h
@ -742,9 +742,15 @@
 #define DEFAULT_RETRACT_ACCELERATION  3000    // E acceleration for retracts
 #define DEFAULT_TRAVEL_ACCELERATION   3000    // X, Y, Z acceleration for travel (non printing) moves
-//
+/**
-// Use Junction Deviation instead of traditional Jerk Limiting
+ * Junction Deviation
-//
+ *
 * Use Junction Deviation instead of traditional Jerk Limiting
 *
 * See:
 *   https://reprap.org/forum/read.php?1,739819
 *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 //#define JUNCTION_DEVIATION
 #if ENABLED(JUNCTION_DEVIATION)
  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
--- a/config/examples/Anet/A2/Configuration.h
+++ b/config/examples/Anet/A2/Configuration.h
@ -731,9 +731,15 @@
 #define DEFAULT_RETRACT_ACCELERATION  3000    // E acceleration for retracts
 #define DEFAULT_TRAVEL_ACCELERATION   3000    // X, Y, Z acceleration for travel (non printing) moves
-//
+/**
-// Use Junction Deviation instead of traditional Jerk Limiting
+ * Junction Deviation
-//
+ *
 * Use Junction Deviation instead of traditional Jerk Limiting
 *
 * See:
 *   https://reprap.org/forum/read.php?1,739819
 *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 //#define JUNCTION_DEVIATION
 #if ENABLED(JUNCTION_DEVIATION)
  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
--- a/config/examples/Anet/A2plus/Configuration.h
+++ b/config/examples/Anet/A2plus/Configuration.h
@ -731,9 +731,15 @@
 #define DEFAULT_RETRACT_ACCELERATION  3000    // E acceleration for retracts
 #define DEFAULT_TRAVEL_ACCELERATION   3000    // X, Y, Z acceleration for travel (non printing) moves
-//
+/**
-// Use Junction Deviation instead of traditional Jerk Limiting
+ * Junction Deviation
-//
+ *
 * Use Junction Deviation instead of traditional Jerk Limiting
 *
 * See:
 *   https://reprap.org/forum/read.php?1,739819
 *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 //#define JUNCTION_DEVIATION
 #if ENABLED(JUNCTION_DEVIATION)
  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
--- a/config/examples/Anet/A6/Configuration.h
+++ b/config/examples/Anet/A6/Configuration.h
@ -776,9 +776,15 @@
 //#define DEFAULT_RETRACT_ACCELERATION  2000   // E acceleration for retracts
 //#define DEFAULT_TRAVEL_ACCELERATION   4000    // X, Y, Z acceleration for travel (non printing) moves
-//
+/**
-// Use Junction Deviation instead of traditional Jerk Limiting
+ * Junction Deviation
-//
+ *
 * Use Junction Deviation instead of traditional Jerk Limiting
 *
 * See:
 *   https://reprap.org/forum/read.php?1,739819
 *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 //#define JUNCTION_DEVIATION
 #if ENABLED(JUNCTION_DEVIATION)
  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
--- a/config/examples/Anet/A8/Configuration.h
+++ b/config/examples/Anet/A8/Configuration.h
@ -744,9 +744,15 @@
 #define DEFAULT_RETRACT_ACCELERATION  1000    // E acceleration for retracts
 #define DEFAULT_TRAVEL_ACCELERATION   1000    // X, Y, Z acceleration for travel (non printing) moves
-//
+/**
-// Use Junction Deviation instead of traditional Jerk Limiting
+ * Junction Deviation
-//
+ *
 * Use Junction Deviation instead of traditional Jerk Limiting
 *
 * See:
 *   https://reprap.org/forum/read.php?1,739819
 *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 //#define JUNCTION_DEVIATION
 #if ENABLED(JUNCTION_DEVIATION)
  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
--- a/config/examples/Anet/A8plus/Configuration.h
+++ b/config/examples/Anet/A8plus/Configuration.h
@ -742,9 +742,15 @@
 #define DEFAULT_RETRACT_ACCELERATION  1000    // E acceleration for retracts
 #define DEFAULT_TRAVEL_ACCELERATION   1000    // X, Y, Z acceleration for travel (non printing) moves
-//
+/**
-// Use Junction Deviation instead of traditional Jerk Limiting
+ * Junction Deviation
-//
+ *
 * Use Junction Deviation instead of traditional Jerk Limiting
 *
 * See:
 *   https://reprap.org/forum/read.php?1,739819
 *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 //#define JUNCTION_DEVIATION
 #if ENABLED(JUNCTION_DEVIATION)
  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
--- a/config/examples/Anet/E16/Configuration.h
+++ b/config/examples/Anet/E16/Configuration.h
@ -743,9 +743,15 @@
 #define DEFAULT_RETRACT_ACCELERATION  1000    // E acceleration for retracts
 #define DEFAULT_TRAVEL_ACCELERATION   1000    // X, Y, Z acceleration for travel (non printing) moves
-//
+/**
-// Use Junction Deviation instead of traditional Jerk Limiting
+ * Junction Deviation
-//
+ *
 * Use Junction Deviation instead of traditional Jerk Limiting
 *
 * See:
 *   https://reprap.org/forum/read.php?1,739819
 *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 #define JUNCTION_DEVIATION
 #if ENABLED(JUNCTION_DEVIATION)
  #define JUNCTION_DEVIATION_MM 0.08  // (mm) Distance from real junction edge
--- a/config/examples/AnyCubic/i3/Configuration.h
+++ b/config/examples/AnyCubic/i3/Configuration.h
@ -741,9 +741,15 @@
 #define DEFAULT_RETRACT_ACCELERATION  2000    // E acceleration for retracts
 #define DEFAULT_TRAVEL_ACCELERATION   1000    // X, Y, Z acceleration for travel (non printing) moves
-//
+/**
-// Use Junction Deviation instead of traditional Jerk Limiting
+ * Junction Deviation
-//
+ *
 * Use Junction Deviation instead of traditional Jerk Limiting
 *
 * See:
 *   https://reprap.org/forum/read.php?1,739819
 *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 //#define JUNCTION_DEVIATION
 #if ENABLED(JUNCTION_DEVIATION)
  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
--- a/config/examples/ArmEd/Configuration.h
+++ b/config/examples/ArmEd/Configuration.h
@ -732,9 +732,15 @@
 #define DEFAULT_RETRACT_ACCELERATION  1000    // E acceleration for retracts
 #define DEFAULT_TRAVEL_ACCELERATION   1000    // X, Y, Z acceleration for travel (non printing) moves
-//
+/**
-// Use Junction Deviation instead of traditional Jerk Limiting
+ * Junction Deviation
-//
+ *
 * Use Junction Deviation instead of traditional Jerk Limiting
 *
 * See:
 *   https://reprap.org/forum/read.php?1,739819
 *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 //#define JUNCTION_DEVIATION
 #if ENABLED(JUNCTION_DEVIATION)
  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
--- a/config/examples/Azteeg/X5GT/Configuration.h
+++ b/config/examples/Azteeg/X5GT/Configuration.h
@ -731,9 +731,15 @@
 #define DEFAULT_RETRACT_ACCELERATION  3000    // E acceleration for retracts
 #define DEFAULT_TRAVEL_ACCELERATION   3000    // X, Y, Z acceleration for travel (non printing) moves
-//
+/**
-// Use Junction Deviation instead of traditional Jerk Limiting
+ * Junction Deviation
-//
+ *
 * Use Junction Deviation instead of traditional Jerk Limiting
 *
 * See:
 *   https://reprap.org/forum/read.php?1,739819
 *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 //#define JUNCTION_DEVIATION
 #if ENABLED(JUNCTION_DEVIATION)
  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
--- a/config/examples/BIBO/TouchX/cyclops/Configuration.h
+++ b/config/examples/BIBO/TouchX/cyclops/Configuration.h
@ -731,9 +731,15 @@
 #define DEFAULT_RETRACT_ACCELERATION  1100    // E acceleration for retracts
 #define DEFAULT_TRAVEL_ACCELERATION   1100    // X, Y, Z acceleration for travel (non printing) moves
-//
+/**
-// Use Junction Deviation instead of traditional Jerk Limiting
+ * Junction Deviation
-//
+ *
 * Use Junction Deviation instead of traditional Jerk Limiting
 *
 * See:
 *   https://reprap.org/forum/read.php?1,739819
 *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 //#define JUNCTION_DEVIATION
 #if ENABLED(JUNCTION_DEVIATION)
  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
--- a/config/examples/BIBO/TouchX/default/Configuration.h
+++ b/config/examples/BIBO/TouchX/default/Configuration.h
@ -731,9 +731,15 @@
 #define DEFAULT_RETRACT_ACCELERATION  1100    // E acceleration for retracts
 #define DEFAULT_TRAVEL_ACCELERATION   1100    // X, Y, Z acceleration for travel (non printing) moves
-//
+/**
-// Use Junction Deviation instead of traditional Jerk Limiting
+ * Junction Deviation
-//
+ *
 * Use Junction Deviation instead of traditional Jerk Limiting
 *
 * See:
 *   https://reprap.org/forum/read.php?1,739819
 *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 //#define JUNCTION_DEVIATION
 #if ENABLED(JUNCTION_DEVIATION)
  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
--- a/config/examples/BQ/Hephestos/Configuration.h
+++ b/config/examples/BQ/Hephestos/Configuration.h
@ -719,9 +719,15 @@
 #define DEFAULT_RETRACT_ACCELERATION  1000    // E acceleration for retracts
 #define DEFAULT_TRAVEL_ACCELERATION   1000    // X, Y, Z acceleration for travel (non printing) moves
-//
+/**
-// Use Junction Deviation instead of traditional Jerk Limiting
+ * Junction Deviation
-//
+ *
 * Use Junction Deviation instead of traditional Jerk Limiting
 *
 * See:
 *   https://reprap.org/forum/read.php?1,739819
 *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 //#define JUNCTION_DEVIATION
 #if ENABLED(JUNCTION_DEVIATION)
  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
--- a/config/examples/BQ/Hephestos_2/Configuration.h
+++ b/config/examples/BQ/Hephestos_2/Configuration.h
@ -732,9 +732,15 @@
 #define DEFAULT_RETRACT_ACCELERATION  1300    // E acceleration for retracts
 #define DEFAULT_TRAVEL_ACCELERATION   1500    // X, Y, Z acceleration for travel (non printing) moves
-//
+/**
-// Use Junction Deviation instead of traditional Jerk Limiting
+ * Junction Deviation
-//
+ *
 * Use Junction Deviation instead of traditional Jerk Limiting
 *
 * See:
 *   https://reprap.org/forum/read.php?1,739819
 *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 //#define JUNCTION_DEVIATION
 #if ENABLED(JUNCTION_DEVIATION)
  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
--- a/config/examples/BQ/WITBOX/Configuration.h
+++ b/config/examples/BQ/WITBOX/Configuration.h
@ -719,9 +719,15 @@
 #define DEFAULT_RETRACT_ACCELERATION  3000    // E acceleration for retracts
 #define DEFAULT_TRAVEL_ACCELERATION   3000    // X, Y, Z acceleration for travel (non printing) moves
-//
+/**
-// Use Junction Deviation instead of traditional Jerk Limiting
+ * Junction Deviation
-//
+ *
 * Use Junction Deviation instead of traditional Jerk Limiting
 *
 * See:
 *   https://reprap.org/forum/read.php?1,739819
 *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 //#define JUNCTION_DEVIATION
 #if ENABLED(JUNCTION_DEVIATION)
  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
--- a/config/examples/Cartesio/Configuration.h
+++ b/config/examples/Cartesio/Configuration.h
@ -730,9 +730,15 @@
 #define DEFAULT_RETRACT_ACCELERATION  10000   // E acceleration for retracts
 #define DEFAULT_TRAVEL_ACCELERATION   1000    // X, Y, Z acceleration for travel (non printing) moves
-//
+/**
-// Use Junction Deviation instead of traditional Jerk Limiting
+ * Junction Deviation
-//
+ *
 * Use Junction Deviation instead of traditional Jerk Limiting
 *
 * See:
 *   https://reprap.org/forum/read.php?1,739819
 *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 //#define JUNCTION_DEVIATION
 #if ENABLED(JUNCTION_DEVIATION)
  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
--- a/config/examples/Creality/CR-10/Configuration.h
+++ b/config/examples/Creality/CR-10/Configuration.h
@ -741,9 +741,15 @@
 #define DEFAULT_RETRACT_ACCELERATION  500    // E acceleration for retracts
 #define DEFAULT_TRAVEL_ACCELERATION   1000    // X, Y, Z acceleration for travel (non printing) moves
-//
+/**
-// Use Junction Deviation instead of traditional Jerk Limiting
+ * Junction Deviation
-//
+ *
 * Use Junction Deviation instead of traditional Jerk Limiting
 *
 * See:
 *   https://reprap.org/forum/read.php?1,739819
 *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 //#define JUNCTION_DEVIATION
 #if ENABLED(JUNCTION_DEVIATION)
  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
--- a/config/examples/Creality/CR-10S/Configuration.h
+++ b/config/examples/Creality/CR-10S/Configuration.h
@ -731,9 +731,15 @@
 #define DEFAULT_RETRACT_ACCELERATION  1000    // E acceleration for retracts
 #define DEFAULT_TRAVEL_ACCELERATION    800    // X, Y, Z acceleration for travel (non printing) moves
-//
+/**
-// Use Junction Deviation instead of traditional Jerk Limiting
+ * Junction Deviation
-//
+ *
 * Use Junction Deviation instead of traditional Jerk Limiting
 *
 * See:
 *   https://reprap.org/forum/read.php?1,739819
 *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 //#define JUNCTION_DEVIATION
 #if ENABLED(JUNCTION_DEVIATION)
  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
--- a/config/examples/Creality/CR-10_5S/Configuration.h
+++ b/config/examples/Creality/CR-10_5S/Configuration.h
@ -732,9 +732,15 @@
 #define DEFAULT_RETRACT_ACCELERATION   500    // E acceleration for retracts
 #define DEFAULT_TRAVEL_ACCELERATION   1000    // X, Y, Z acceleration for travel (non printing) moves
-//
+/**
-// Use Junction Deviation instead of traditional Jerk Limiting
+ * Junction Deviation
-//
+ *
 * Use Junction Deviation instead of traditional Jerk Limiting
 *
 * See:
 *   https://reprap.org/forum/read.php?1,739819
 *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 //#define JUNCTION_DEVIATION
 #if ENABLED(JUNCTION_DEVIATION)
  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
--- a/config/examples/Creality/CR-10mini/Configuration.h
+++ b/config/examples/Creality/CR-10mini/Configuration.h
@ -750,9 +750,15 @@
 #define DEFAULT_RETRACT_ACCELERATION  1000    // E acceleration for retracts
 #define DEFAULT_TRAVEL_ACCELERATION   1000    // X, Y, Z acceleration for travel (non printing) moves
-//
+/**
-// Use Junction Deviation instead of traditional Jerk Limiting
+ * Junction Deviation
-//
+ *
 * Use Junction Deviation instead of traditional Jerk Limiting
 *
 * See:
 *   https://reprap.org/forum/read.php?1,739819
 *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 //#define JUNCTION_DEVIATION
 #if ENABLED(JUNCTION_DEVIATION)
  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
--- a/config/examples/Creality/CR-8/Configuration.h
+++ b/config/examples/Creality/CR-8/Configuration.h
@ -741,9 +741,15 @@
 #define DEFAULT_RETRACT_ACCELERATION  500    // E acceleration for retracts
 #define DEFAULT_TRAVEL_ACCELERATION   500    // X, Y, Z acceleration for travel (non printing) moves
-//
+/**
-// Use Junction Deviation instead of traditional Jerk Limiting
+ * Junction Deviation
-//
+ *
 * Use Junction Deviation instead of traditional Jerk Limiting
 *
 * See:
 *   https://reprap.org/forum/read.php?1,739819
 *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 //#define JUNCTION_DEVIATION
 #if ENABLED(JUNCTION_DEVIATION)
  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
--- a/config/examples/Creality/Ender-2/Configuration.h
+++ b/config/examples/Creality/Ender-2/Configuration.h
@ -735,9 +735,15 @@
 #define DEFAULT_RETRACT_ACCELERATION  500    // E acceleration for retracts
 #define DEFAULT_TRAVEL_ACCELERATION   500    // X, Y, Z acceleration for travel (non printing) moves
-//
+/**
-// Use Junction Deviation instead of traditional Jerk Limiting
+ * Junction Deviation
-//
+ *
 * Use Junction Deviation instead of traditional Jerk Limiting
 *
 * See:
 *   https://reprap.org/forum/read.php?1,739819
 *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 //#define JUNCTION_DEVIATION
 #if ENABLED(JUNCTION_DEVIATION)
  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
--- a/config/examples/Creality/Ender-3/Configuration.h
+++ b/config/examples/Creality/Ender-3/Configuration.h
@ -735,9 +735,15 @@
 #define DEFAULT_RETRACT_ACCELERATION  500    // E acceleration for retracts
 #define DEFAULT_TRAVEL_ACCELERATION   500    // X, Y, Z acceleration for travel (non printing) moves
-//
+/**
-// Use Junction Deviation instead of traditional Jerk Limiting
+ * Junction Deviation
-//
+ *
 * Use Junction Deviation instead of traditional Jerk Limiting
 *
 * See:
 *   https://reprap.org/forum/read.php?1,739819
 *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 //#define JUNCTION_DEVIATION
 #if ENABLED(JUNCTION_DEVIATION)
  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
--- a/config/examples/Creality/Ender-4/Configuration.h
+++ b/config/examples/Creality/Ender-4/Configuration.h
@ -741,9 +741,15 @@
 #define DEFAULT_RETRACT_ACCELERATION  3000    // E acceleration for retracts
 #define DEFAULT_TRAVEL_ACCELERATION   3000    // X, Y, Z acceleration for travel (non printing) moves
-//
+/**
-// Use Junction Deviation instead of traditional Jerk Limiting
+ * Junction Deviation
-//
+ *
 * Use Junction Deviation instead of traditional Jerk Limiting
 *
 * See:
 *   https://reprap.org/forum/read.php?1,739819
 *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 //#define JUNCTION_DEVIATION
 #if ENABLED(JUNCTION_DEVIATION)
  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
--- a/config/examples/Dagoma/Disco
+++ b/config/examples/Dagoma/Disco
@ -731,9 +731,15 @@
 #define DEFAULT_RETRACT_ACCELERATION  3000    // E acceleration for retracts
 #define DEFAULT_TRAVEL_ACCELERATION   3000    // X, Y, Z acceleration for travel (non printing) moves
-//
+/**
-// Use Junction Deviation instead of traditional Jerk Limiting
+ * Junction Deviation
-//
+ *
 * Use Junction Deviation instead of traditional Jerk Limiting
 *
 * See:
 *   https://reprap.org/forum/read.php?1,739819
 *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 #define JUNCTION_DEVIATION
 #if ENABLED(JUNCTION_DEVIATION)
  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
--- a/(Artillery)/Sidewinder
+++ b/(Artillery)/Sidewinder
@ -736,9 +736,15 @@
 #define DEFAULT_RETRACT_ACCELERATION  10000    // E acceleration for retracts
 #define DEFAULT_TRAVEL_ACCELERATION   2000    // X, Y, Z acceleration for travel (non printing) moves
-//
+/**
-// Use Junction Deviation instead of traditional Jerk Limiting
+ * Junction Deviation
-//
+ *
 * Use Junction Deviation instead of traditional Jerk Limiting
 *
 * See:
 *   https://reprap.org/forum/read.php?1,739819
 *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 //#define JUNCTION_DEVIATION
 #if ENABLED(JUNCTION_DEVIATION)
  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
--- a/config/examples/Einstart-S/Configuration.h
+++ b/config/examples/Einstart-S/Configuration.h
@ -741,9 +741,15 @@
 #define DEFAULT_RETRACT_ACCELERATION  2000    // E acceleration for retracts
 #define DEFAULT_TRAVEL_ACCELERATION   2000    // X, Y, Z acceleration for travel (non printing) moves
-//
+/**
-// Use Junction Deviation instead of traditional Jerk Limiting
+ * Junction Deviation
-//
+ *
 * Use Junction Deviation instead of traditional Jerk Limiting
 *
 * See:
 *   https://reprap.org/forum/read.php?1,739819
 *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 //#define JUNCTION_DEVIATION
 #if ENABLED(JUNCTION_DEVIATION)
  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
--- a/config/examples/Felix/Configuration.h
+++ b/config/examples/Felix/Configuration.h
@ -713,9 +713,15 @@
 #define DEFAULT_RETRACT_ACCELERATION  5000    // E acceleration for retracts
 #define DEFAULT_TRAVEL_ACCELERATION   3000    // X, Y, Z acceleration for travel (non printing) moves
-//
+/**
-// Use Junction Deviation instead of traditional Jerk Limiting
+ * Junction Deviation
-//
+ *
 * Use Junction Deviation instead of traditional Jerk Limiting
 *
 * See:
 *   https://reprap.org/forum/read.php?1,739819
 *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 //#define JUNCTION_DEVIATION
 #if ENABLED(JUNCTION_DEVIATION)
  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
--- a/config/examples/Felix/DUAL/Configuration.h
+++ b/config/examples/Felix/DUAL/Configuration.h
@ -713,9 +713,15 @@
 #define DEFAULT_RETRACT_ACCELERATION  5000    // E acceleration for retracts
 #define DEFAULT_TRAVEL_ACCELERATION   3000    // X, Y, Z acceleration for travel (non printing) moves
-//
+/**
-// Use Junction Deviation instead of traditional Jerk Limiting
+ * Junction Deviation
-//
+ *
 * Use Junction Deviation instead of traditional Jerk Limiting
 *
 * See:
 *   https://reprap.org/forum/read.php?1,739819
 *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 //#define JUNCTION_DEVIATION
 #if ENABLED(JUNCTION_DEVIATION)
  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
--- a/config/examples/FlashForge/CreatorPro/Configuration.h
+++ b/config/examples/FlashForge/CreatorPro/Configuration.h
@ -723,9 +723,15 @@
 #define DEFAULT_RETRACT_ACCELERATION  5000    // E acceleration for retracts
 #define DEFAULT_TRAVEL_ACCELERATION   500    // X, Y, Z acceleration for travel (non printing) moves
-//
+/**
-// Use Junction Deviation instead of traditional Jerk Limiting
+ * Junction Deviation
-//
+ *
 * Use Junction Deviation instead of traditional Jerk Limiting
 *
 * See:
 *   https://reprap.org/forum/read.php?1,739819
 *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 #define JUNCTION_DEVIATION
 #if ENABLED(JUNCTION_DEVIATION)
  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
--- a/config/examples/FolgerTech/i3-2020/Configuration.h
+++ b/config/examples/FolgerTech/i3-2020/Configuration.h
@ -737,9 +737,15 @@
 #define DEFAULT_RETRACT_ACCELERATION   400    // E acceleration for retracts
 #define DEFAULT_TRAVEL_ACCELERATION    400    // X, Y, Z acceleration for travel (non printing) moves
-//
+/**
-// Use Junction Deviation instead of traditional Jerk Limiting
+ * Junction Deviation
-//
+ *
 * Use Junction Deviation instead of traditional Jerk Limiting
 *
 * See:
 *   https://reprap.org/forum/read.php?1,739819
 *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 //#define JUNCTION_DEVIATION
 #if ENABLED(JUNCTION_DEVIATION)
  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
--- a/config/examples/Formbot/Raptor/Configuration.h
+++ b/config/examples/Formbot/Raptor/Configuration.h
@ -806,9 +806,15 @@
 #define DEFAULT_RETRACT_ACCELERATION  3000    // E acceleration for retracts
 #define DEFAULT_TRAVEL_ACCELERATION   3000    // X, Y, Z acceleration for travel (non printing) moves
-//
+/**
-// Use Junction Deviation instead of traditional Jerk Limiting
+ * Junction Deviation
-//
+ *
 * Use Junction Deviation instead of traditional Jerk Limiting
 *
 * See:
 *   https://reprap.org/forum/read.php?1,739819
 *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 //#define JUNCTION_DEVIATION
 #if ENABLED(JUNCTION_DEVIATION)
  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
--- a/config/examples/Formbot/T_Rex_2+/Configuration.h
+++ b/config/examples/Formbot/T_Rex_2+/Configuration.h
@ -760,9 +760,15 @@
 #define DEFAULT_RETRACT_ACCELERATION  1500    // E acceleration for retracts
 #define DEFAULT_TRAVEL_ACCELERATION   1500    // X, Y, Z acceleration for travel (non printing) moves
-//
+/**
-// Use Junction Deviation instead of traditional Jerk Limiting
+ * Junction Deviation
-//
+ *
 * Use Junction Deviation instead of traditional Jerk Limiting
 *
 * See:
 *   https://reprap.org/forum/read.php?1,739819
 *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 //#define JUNCTION_DEVIATION
 #if ENABLED(JUNCTION_DEVIATION)
  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
--- a/config/examples/Formbot/T_Rex_3/Configuration.h
+++ b/config/examples/Formbot/T_Rex_3/Configuration.h
@ -747,9 +747,15 @@
 #define DEFAULT_RETRACT_ACCELERATION  1500    // E acceleration for retracts
 #define DEFAULT_TRAVEL_ACCELERATION   1500    // X, Y, Z acceleration for travel (non printing) moves
-//
+/**
-// Use Junction Deviation instead of traditional Jerk Limiting
+ * Junction Deviation
-//
+ *
 * Use Junction Deviation instead of traditional Jerk Limiting
 *
 * See:
 *   https://reprap.org/forum/read.php?1,739819
 *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 //#define JUNCTION_DEVIATION
 #if ENABLED(JUNCTION_DEVIATION)
  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
--- a/config/examples/Geeetech/A10/Configuration.h
+++ b/config/examples/Geeetech/A10/Configuration.h
@ -714,9 +714,15 @@
 #define DEFAULT_RETRACT_ACCELERATION  2000    // E acceleration for retracts
 #define DEFAULT_TRAVEL_ACCELERATION   1000    // X, Y, Z acceleration for travel (non printing) moves
-//
+/**
-// Use Junction Deviation instead of traditional Jerk Limiting
+ * Junction Deviation
-//
+ *
 * Use Junction Deviation instead of traditional Jerk Limiting
 *
 * See:
 *   https://reprap.org/forum/read.php?1,739819
 *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 #define JUNCTION_DEVIATION
 #if ENABLED(JUNCTION_DEVIATION)
  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
--- a/config/examples/Geeetech/A10M/Configuration.h
+++ b/config/examples/Geeetech/A10M/Configuration.h
@ -714,9 +714,15 @@
 #define DEFAULT_RETRACT_ACCELERATION  2000    // E acceleration for retracts
 #define DEFAULT_TRAVEL_ACCELERATION   1000    // X, Y, Z acceleration for travel (non printing) moves
-//
+/**
-// Use Junction Deviation instead of traditional Jerk Limiting
+ * Junction Deviation
-//
+ *
 * Use Junction Deviation instead of traditional Jerk Limiting
 *
 * See:
 *   https://reprap.org/forum/read.php?1,739819
 *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 #define JUNCTION_DEVIATION
 #if ENABLED(JUNCTION_DEVIATION)
  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
--- a/config/examples/Geeetech/A20M/Configuration.h
+++ b/config/examples/Geeetech/A20M/Configuration.h
@ -714,9 +714,15 @@
 #define DEFAULT_RETRACT_ACCELERATION  2000    // E acceleration for retracts
 #define DEFAULT_TRAVEL_ACCELERATION   1000    // X, Y, Z acceleration for travel (non printing) moves
-//
+/**
-// Use Junction Deviation instead of traditional Jerk Limiting
+ * Junction Deviation
-//
+ *
 * Use Junction Deviation instead of traditional Jerk Limiting
 *
 * See:
 *   https://reprap.org/forum/read.php?1,739819
 *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 #define JUNCTION_DEVIATION
 #if ENABLED(JUNCTION_DEVIATION)
  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
--- a/config/examples/Geeetech/GT2560/Configuration.h
+++ b/config/examples/Geeetech/GT2560/Configuration.h
@ -746,9 +746,15 @@
 #define DEFAULT_RETRACT_ACCELERATION  2000    // E acceleration for retracts
 #define DEFAULT_TRAVEL_ACCELERATION   3000    // X, Y, Z acceleration for travel (non printing) moves
-//
+/**
-// Use Junction Deviation instead of traditional Jerk Limiting
+ * Junction Deviation
-//
+ *
 * Use Junction Deviation instead of traditional Jerk Limiting
 *
 * See:
 *   https://reprap.org/forum/read.php?1,739819
 *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 //#define JUNCTION_DEVIATION
 #if ENABLED(JUNCTION_DEVIATION)
  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
--- a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h
+++ b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h
@ -731,9 +731,15 @@
 #define DEFAULT_RETRACT_ACCELERATION  2000    // E acceleration for retracts
 #define DEFAULT_TRAVEL_ACCELERATION   3000    // X, Y, Z acceleration for travel (non printing) moves
-//
+/**
-// Use Junction Deviation instead of traditional Jerk Limiting
+ * Junction Deviation
-//
+ *
 * Use Junction Deviation instead of traditional Jerk Limiting
 *
 * See:
 *   https://reprap.org/forum/read.php?1,739819
 *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 //#define JUNCTION_DEVIATION
 #if ENABLED(JUNCTION_DEVIATION)
  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
--- a/config/examples/Geeetech/MeCreator2/Configuration.h
+++ b/config/examples/Geeetech/MeCreator2/Configuration.h
@ -738,9 +738,15 @@
 #define DEFAULT_RETRACT_ACCELERATION  2000    // E acceleration for retracts
 #define DEFAULT_TRAVEL_ACCELERATION   2000    // X, Y, Z acceleration for travel (non printing) moves
-//
+/**
-// Use Junction Deviation instead of traditional Jerk Limiting
+ * Junction Deviation
-//
+ *
 * Use Junction Deviation instead of traditional Jerk Limiting
 *
 * See:
 *   https://reprap.org/forum/read.php?1,739819
 *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 //#define JUNCTION_DEVIATION
 #if ENABLED(JUNCTION_DEVIATION)
  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
--- a/config/examples/Geeetech/Prusa
+++ b/config/examples/Geeetech/Prusa
@ -751,9 +751,15 @@
 #define DEFAULT_RETRACT_ACCELERATION  2000    // E acceleration for retracts
 #define DEFAULT_TRAVEL_ACCELERATION   3000    // X, Y, Z acceleration for travel (non printing) moves
-//
+/**
-// Use Junction Deviation instead of traditional Jerk Limiting
+ * Junction Deviation
-//
+ *
 * Use Junction Deviation instead of traditional Jerk Limiting
 *
 * See:
 *   https://reprap.org/forum/read.php?1,739819
 *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 //#define JUNCTION_DEVIATION
 #if ENABLED(JUNCTION_DEVIATION)
  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
--- a/config/examples/Geeetech/Prusa
+++ b/config/examples/Geeetech/Prusa
@ -751,9 +751,15 @@
 #define DEFAULT_RETRACT_ACCELERATION  2000    // E acceleration for retracts
 #define DEFAULT_TRAVEL_ACCELERATION   3000    // X, Y, Z acceleration for travel (non printing) moves
-//
+/**
-// Use Junction Deviation instead of traditional Jerk Limiting
+ * Junction Deviation
-//
+ *
 * Use Junction Deviation instead of traditional Jerk Limiting
 *
 * See:
 *   https://reprap.org/forum/read.php?1,739819
 *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 //#define JUNCTION_DEVIATION
 #if ENABLED(JUNCTION_DEVIATION)
  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
--- a/config/examples/Geeetech/Prusa
+++ b/config/examples/Geeetech/Prusa
@ -731,9 +731,15 @@
 #define DEFAULT_RETRACT_ACCELERATION  3000    // E acceleration for retracts
 #define DEFAULT_TRAVEL_ACCELERATION   3000    // X, Y, Z acceleration for travel (non printing) moves
-//
+/**
-// Use Junction Deviation instead of traditional Jerk Limiting
+ * Junction Deviation
-//
+ *
 * Use Junction Deviation instead of traditional Jerk Limiting
 *
 * See:
 *   https://reprap.org/forum/read.php?1,739819
 *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 //#define JUNCTION_DEVIATION
 #if ENABLED(JUNCTION_DEVIATION)
  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
--- a/config/examples/Geeetech/Prusa
+++ b/config/examples/Geeetech/Prusa
@ -731,9 +731,15 @@
 #define DEFAULT_RETRACT_ACCELERATION  3000    // E acceleration for retracts
 #define DEFAULT_TRAVEL_ACCELERATION   3000    // X, Y, Z acceleration for travel (non printing) moves
-//
+/**
-// Use Junction Deviation instead of traditional Jerk Limiting
+ * Junction Deviation
-//
+ *
 * Use Junction Deviation instead of traditional Jerk Limiting
 *
 * See:
 *   https://reprap.org/forum/read.php?1,739819
 *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 //#define JUNCTION_DEVIATION
 #if ENABLED(JUNCTION_DEVIATION)
  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
--- a/config/examples/Infitary/i3-M508/Configuration.h
+++ b/config/examples/Infitary/i3-M508/Configuration.h
@ -735,9 +735,15 @@
 #define DEFAULT_RETRACT_ACCELERATION  3000    // E acceleration for retracts
 #define DEFAULT_TRAVEL_ACCELERATION   3000    // X, Y, Z acceleration for travel (non printing) moves
-//
+/**
-// Use Junction Deviation instead of traditional Jerk Limiting
+ * Junction Deviation
-//
+ *
 * Use Junction Deviation instead of traditional Jerk Limiting
 *
 * See:
 *   https://reprap.org/forum/read.php?1,739819
 *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 //#define JUNCTION_DEVIATION
 #if ENABLED(JUNCTION_DEVIATION)
  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
--- a/config/examples/JGAurora/A5/Configuration.h
+++ b/config/examples/JGAurora/A5/Configuration.h
@ -743,9 +743,15 @@
 #define DEFAULT_RETRACT_ACCELERATION  800    // E acceleration for retracts
 #define DEFAULT_TRAVEL_ACCELERATION   1000    // X, Y, Z acceleration for travel (non printing) moves
-//
+/**
-// Use Junction Deviation instead of traditional Jerk Limiting
+ * Junction Deviation
-//
+ *
 * Use Junction Deviation instead of traditional Jerk Limiting
 *
 * See:
 *   https://reprap.org/forum/read.php?1,739819
 *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 //#define JUNCTION_DEVIATION
 #if ENABLED(JUNCTION_DEVIATION)
  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
--- a/config/examples/MakerParts/Configuration.h
+++ b/config/examples/MakerParts/Configuration.h
@ -751,9 +751,15 @@
 #define DEFAULT_RETRACT_ACCELERATION  100                 // E acceleration for retracts
 #define DEFAULT_TRAVEL_ACCELERATION   MAX_XYAXIS_ACCEL    // X, Y, Z acceleration for travel (non printing) moves
-//
+/**
-// Use Junction Deviation instead of traditional Jerk Limiting
+ * Junction Deviation
-//
+ *
 * Use Junction Deviation instead of traditional Jerk Limiting
 *
 * See:
 *   https://reprap.org/forum/read.php?1,739819
 *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 //#define JUNCTION_DEVIATION
 #if ENABLED(JUNCTION_DEVIATION)
  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
--- a/config/examples/Malyan/M150/Configuration.h
+++ b/config/examples/Malyan/M150/Configuration.h
@ -751,9 +751,15 @@
 #define DEFAULT_RETRACT_ACCELERATION  3000   // E acceleration for retracts
 #define DEFAULT_TRAVEL_ACCELERATION   700    // X, Y, Z acceleration for travel (non printing) moves
-//
+/**
-// Use Junction Deviation instead of traditional Jerk Limiting
+ * Junction Deviation
-//
+ *
 * Use Junction Deviation instead of traditional Jerk Limiting
 *
 * See:
 *   https://reprap.org/forum/read.php?1,739819
 *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 //#define JUNCTION_DEVIATION
 #if ENABLED(JUNCTION_DEVIATION)
  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
--- a/config/examples/Malyan/M200/Configuration.h
+++ b/config/examples/Malyan/M200/Configuration.h
@ -730,9 +730,15 @@
 #define DEFAULT_RETRACT_ACCELERATION  3000    // E acceleration for retracts
 #define DEFAULT_TRAVEL_ACCELERATION   3000    // X, Y, Z acceleration for travel (non printing) moves
-//
+/**
-// Use Junction Deviation instead of traditional Jerk Limiting
+ * Junction Deviation
-//
+ *
 * Use Junction Deviation instead of traditional Jerk Limiting
 *
 * See:
 *   https://reprap.org/forum/read.php?1,739819
 *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 //#define JUNCTION_DEVIATION
 #if ENABLED(JUNCTION_DEVIATION)
  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
--- a/config/examples/Micromake/C1/basic/Configuration.h
+++ b/config/examples/Micromake/C1/basic/Configuration.h
@ -735,9 +735,15 @@
 #define DEFAULT_RETRACT_ACCELERATION  3000    // E acceleration for retracts
 #define DEFAULT_TRAVEL_ACCELERATION   3000    // X, Y, Z acceleration for travel (non printing) moves
-//
+/**
-// Use Junction Deviation instead of traditional Jerk Limiting
+ * Junction Deviation
-//
+ *
 * Use Junction Deviation instead of traditional Jerk Limiting
 *
 * See:
 *   https://reprap.org/forum/read.php?1,739819
 *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 //#define JUNCTION_DEVIATION
 #if ENABLED(JUNCTION_DEVIATION)
  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
--- a/config/examples/Micromake/C1/enhanced/Configuration.h
+++ b/config/examples/Micromake/C1/enhanced/Configuration.h
@ -735,9 +735,15 @@
 #define DEFAULT_RETRACT_ACCELERATION  3000    // E acceleration for retracts
 #define DEFAULT_TRAVEL_ACCELERATION   3000    // X, Y, Z acceleration for travel (non printing) moves
-//
+/**
-// Use Junction Deviation instead of traditional Jerk Limiting
+ * Junction Deviation
-//
+ *
 * Use Junction Deviation instead of traditional Jerk Limiting
 *
 * See:
 *   https://reprap.org/forum/read.php?1,739819
 *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 //#define JUNCTION_DEVIATION
 #if ENABLED(JUNCTION_DEVIATION)
  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
--- a/config/examples/Mks/Robin/Configuration.h
+++ b/config/examples/Mks/Robin/Configuration.h
@ -732,9 +732,15 @@
 #define DEFAULT_RETRACT_ACCELERATION  3000    // E acceleration for retracts
 #define DEFAULT_TRAVEL_ACCELERATION   3000    // X, Y, Z acceleration for travel (non printing) moves
-//
+/**
-// Use Junction Deviation instead of traditional Jerk Limiting
+ * Junction Deviation
-//
+ *
 * Use Junction Deviation instead of traditional Jerk Limiting
 *
 * See:
 *   https://reprap.org/forum/read.php?1,739819
 *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 //#define JUNCTION_DEVIATION
 #if ENABLED(JUNCTION_DEVIATION)
  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
--- a/config/examples/Mks/Sbase/Configuration.h
+++ b/config/examples/Mks/Sbase/Configuration.h
@ -731,9 +731,15 @@
 #define DEFAULT_RETRACT_ACCELERATION  3000    // E acceleration for retracts
 #define DEFAULT_TRAVEL_ACCELERATION   3000    // X, Y, Z acceleration for travel (non printing) moves
-//
+/**
-// Use Junction Deviation instead of traditional Jerk Limiting
+ * Junction Deviation
-//
+ *
 * Use Junction Deviation instead of traditional Jerk Limiting
 *
 * See:
 *   https://reprap.org/forum/read.php?1,739819
 *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 //#define JUNCTION_DEVIATION
 #if ENABLED(JUNCTION_DEVIATION)
  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
--- a/config/examples/Printrbot/PrintrboardG2/Configuration.h
+++ b/config/examples/Printrbot/PrintrboardG2/Configuration.h
@ -739,9 +739,15 @@
 #define DEFAULT_RETRACT_ACCELERATION  100    // E acceleration for retracts
 #define DEFAULT_TRAVEL_ACCELERATION   100    // X, Y, Z acceleration for travel (non printing) moves
-//
+/**
-// Use Junction Deviation instead of traditional Jerk Limiting
+ * Junction Deviation
-//
+ *
 * Use Junction Deviation instead of traditional Jerk Limiting
 *
 * See:
 *   https://reprap.org/forum/read.php?1,739819
 *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 //#define JUNCTION_DEVIATION
 #if ENABLED(JUNCTION_DEVIATION)
  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
--- a/config/examples/RapideLite/RL200/Configuration.h
+++ b/config/examples/RapideLite/RL200/Configuration.h
@ -731,9 +731,15 @@
 #define DEFAULT_RETRACT_ACCELERATION  3000    // E acceleration for retracts
 #define DEFAULT_TRAVEL_ACCELERATION   3000    // X, Y, Z acceleration for travel (non printing) moves
-//
+/**
-// Use Junction Deviation instead of traditional Jerk Limiting
+ * Junction Deviation
-//
+ *
 * Use Junction Deviation instead of traditional Jerk Limiting
 *
 * See:
 *   https://reprap.org/forum/read.php?1,739819
 *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 //#define JUNCTION_DEVIATION
 #if ENABLED(JUNCTION_DEVIATION)
  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
--- a/config/examples/RepRapPro/Huxley/Configuration.h
+++ b/config/examples/RepRapPro/Huxley/Configuration.h
@ -771,9 +771,15 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley
 #define DEFAULT_RETRACT_ACCELERATION  1000    // E acceleration for retracts
 #define DEFAULT_TRAVEL_ACCELERATION   1000    // X, Y, Z acceleration for travel (non printing) moves
-//
+/**
-// Use Junction Deviation instead of traditional Jerk Limiting
+ * Junction Deviation
-//
+ *
 * Use Junction Deviation instead of traditional Jerk Limiting
 *
 * See:
 *   https://reprap.org/forum/read.php?1,739819
 *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 //#define JUNCTION_DEVIATION
 #if ENABLED(JUNCTION_DEVIATION)
  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
--- a/config/examples/RepRapWorld/Megatronics/Configuration.h
+++ b/config/examples/RepRapWorld/Megatronics/Configuration.h
@ -731,9 +731,15 @@
 #define DEFAULT_RETRACT_ACCELERATION  3000    // E acceleration for retracts
 #define DEFAULT_TRAVEL_ACCELERATION   3000    // X, Y, Z acceleration for travel (non printing) moves
-//
+/**
-// Use Junction Deviation instead of traditional Jerk Limiting
+ * Junction Deviation
-//
+ *
 * Use Junction Deviation instead of traditional Jerk Limiting
 *
 * See:
 *   https://reprap.org/forum/read.php?1,739819
 *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 //#define JUNCTION_DEVIATION
 #if ENABLED(JUNCTION_DEVIATION)
  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
--- a/config/examples/RigidBot/Configuration.h
+++ b/config/examples/RigidBot/Configuration.h
@ -729,9 +729,15 @@
 #define DEFAULT_RETRACT_ACCELERATION  1000    // E acceleration for retracts
 #define DEFAULT_TRAVEL_ACCELERATION   3000    // X, Y, Z acceleration for travel (non printing) moves
-//
+/**
-// Use Junction Deviation instead of traditional Jerk Limiting
+ * Junction Deviation
-//
+ *
 * Use Junction Deviation instead of traditional Jerk Limiting
 *
 * See:
 *   https://reprap.org/forum/read.php?1,739819
 *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 //#define JUNCTION_DEVIATION
 #if ENABLED(JUNCTION_DEVIATION)
  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
--- a/config/examples/SCARA/Configuration.h
+++ b/config/examples/SCARA/Configuration.h
@ -744,9 +744,15 @@
 #define DEFAULT_RETRACT_ACCELERATION  2000   // E acceleration for retracts
 #define DEFAULT_TRAVEL_ACCELERATION   400    // X, Y, Z acceleration for travel (non printing) moves
-//
+/**
-// Use Junction Deviation instead of traditional Jerk Limiting
+ * Junction Deviation
-//
+ *
 * Use Junction Deviation instead of traditional Jerk Limiting
 *
 * See:
 *   https://reprap.org/forum/read.php?1,739819
 *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 //#define JUNCTION_DEVIATION
 #if ENABLED(JUNCTION_DEVIATION)
  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
--- a/config/examples/STM32/Black_STM32F407VET6/Configuration.h
+++ b/config/examples/STM32/Black_STM32F407VET6/Configuration.h
@ -731,9 +731,15 @@
 #define DEFAULT_RETRACT_ACCELERATION  3000    // E acceleration for retracts
 #define DEFAULT_TRAVEL_ACCELERATION   3000    // X, Y, Z acceleration for travel (non printing) moves
-//
+/**
-// Use Junction Deviation instead of traditional Jerk Limiting
+ * Junction Deviation
-//
+ *
 * Use Junction Deviation instead of traditional Jerk Limiting
 *
 * See:
 *   https://reprap.org/forum/read.php?1,739819
 *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 //#define JUNCTION_DEVIATION
 #if ENABLED(JUNCTION_DEVIATION)
  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
--- a/config/examples/STM32/STM32F10/Configuration.h
+++ b/config/examples/STM32/STM32F10/Configuration.h
@ -733,9 +733,15 @@
 #define DEFAULT_RETRACT_ACCELERATION  5000    // E acceleration for retracts
 #define DEFAULT_TRAVEL_ACCELERATION   3000    // X, Y, Z acceleration for travel (non printing) moves
-//
+/**
-// Use Junction Deviation instead of traditional Jerk Limiting
+ * Junction Deviation
-//
+ *
 * Use Junction Deviation instead of traditional Jerk Limiting
 *
 * See:
 *   https://reprap.org/forum/read.php?1,739819
 *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 //#define JUNCTION_DEVIATION
 #if ENABLED(JUNCTION_DEVIATION)
  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
--- a/config/examples/STM32/STM32F4/Configuration.h
+++ b/config/examples/STM32/STM32F4/Configuration.h
@ -731,9 +731,15 @@
 #define DEFAULT_RETRACT_ACCELERATION  3000    // E acceleration for retracts
 #define DEFAULT_TRAVEL_ACCELERATION   3000    // X, Y, Z acceleration for travel (non printing) moves
-//
+/**
-// Use Junction Deviation instead of traditional Jerk Limiting
+ * Junction Deviation
-//
+ *
 * Use Junction Deviation instead of traditional Jerk Limiting
 *
 * See:
 *   https://reprap.org/forum/read.php?1,739819
 *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 //#define JUNCTION_DEVIATION
 #if ENABLED(JUNCTION_DEVIATION)
  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
--- a/config/examples/STM32/stm32f103ret6/Configuration.h
+++ b/config/examples/STM32/stm32f103ret6/Configuration.h
@ -733,9 +733,15 @@
 #define DEFAULT_RETRACT_ACCELERATION  5000    // E acceleration for retracts
 #define DEFAULT_TRAVEL_ACCELERATION   3000    // X, Y, Z acceleration for travel (non printing) moves
-//
+/**
-// Use Junction Deviation instead of traditional Jerk Limiting
+ * Junction Deviation
-//
+ *
 * Use Junction Deviation instead of traditional Jerk Limiting
 *
 * See:
 *   https://reprap.org/forum/read.php?1,739819
 *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 //#define JUNCTION_DEVIATION
 #if ENABLED(JUNCTION_DEVIATION)
  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
--- a/config/examples/Sanguinololu/Configuration.h
+++ b/config/examples/Sanguinololu/Configuration.h
@ -762,9 +762,15 @@
 #define DEFAULT_RETRACT_ACCELERATION  3000    // E acceleration for retracts
 #define DEFAULT_TRAVEL_ACCELERATION   3000    // X, Y, Z acceleration for travel (non printing) moves
-//
+/**
-// Use Junction Deviation instead of traditional Jerk Limiting
+ * Junction Deviation
-//
+ *
 * Use Junction Deviation instead of traditional Jerk Limiting
 *
 * See:
 *   https://reprap.org/forum/read.php?1,739819
 *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 //#define JUNCTION_DEVIATION
 #if ENABLED(JUNCTION_DEVIATION)
  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
--- a/config/examples/TheBorg/Configuration.h
+++ b/config/examples/TheBorg/Configuration.h
@ -731,9 +731,15 @@
 #define DEFAULT_RETRACT_ACCELERATION  3000    // E acceleration for retracts
 #define DEFAULT_TRAVEL_ACCELERATION   3000    // X, Y, Z acceleration for travel (non printing) moves
-//
+/**
-// Use Junction Deviation instead of traditional Jerk Limiting
+ * Junction Deviation
-//
+ *
 * Use Junction Deviation instead of traditional Jerk Limiting
 *
 * See:
 *   https://reprap.org/forum/read.php?1,739819
 *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 //#define JUNCTION_DEVIATION
 #if ENABLED(JUNCTION_DEVIATION)
  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
--- a/config/examples/TinyBoy2/Configuration.h
+++ b/config/examples/TinyBoy2/Configuration.h
@ -782,9 +782,15 @@
 #define DEFAULT_RETRACT_ACCELERATION  3000    // E acceleration for retracts
 #define DEFAULT_TRAVEL_ACCELERATION   3000    // X, Y, Z acceleration for travel (non printing) moves
-//
+/**
-// Use Junction Deviation instead of traditional Jerk Limiting
+ * Junction Deviation
-//
+ *
 * Use Junction Deviation instead of traditional Jerk Limiting
 *
 * See:
 *   https://reprap.org/forum/read.php?1,739819
 *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 //#define JUNCTION_DEVIATION
 #if ENABLED(JUNCTION_DEVIATION)
  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
--- a/config/examples/Tronxy/X1/Configuration.h
+++ b/config/examples/Tronxy/X1/Configuration.h
@ -731,9 +731,15 @@
 #define DEFAULT_RETRACT_ACCELERATION  3000    // E acceleration for retracts
 #define DEFAULT_TRAVEL_ACCELERATION   3000    // X, Y, Z acceleration for travel (non printing) moves
-//
+/**
-// Use Junction Deviation instead of traditional Jerk Limiting
+ * Junction Deviation
-//
+ *
 * Use Junction Deviation instead of traditional Jerk Limiting
 *
 * See:
 *   https://reprap.org/forum/read.php?1,739819
 *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 //#define JUNCTION_DEVIATION
 #if ENABLED(JUNCTION_DEVIATION)
  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
--- a/config/examples/Tronxy/X3A/Configuration.h
+++ b/config/examples/Tronxy/X3A/Configuration.h
@ -731,9 +731,15 @@
 #define DEFAULT_RETRACT_ACCELERATION  3000    // E acceleration for retracts
 #define DEFAULT_TRAVEL_ACCELERATION   3000    // X, Y, Z acceleration for travel (non printing) moves
-//
+/**
-// Use Junction Deviation instead of traditional Jerk Limiting
+ * Junction Deviation
-//
+ *
 * Use Junction Deviation instead of traditional Jerk Limiting
 *
 * See:
 *   https://reprap.org/forum/read.php?1,739819
 *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 //#define JUNCTION_DEVIATION
 #if ENABLED(JUNCTION_DEVIATION)
  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
--- a/config/examples/Tronxy/X5S-2E/Configuration.h
+++ b/config/examples/Tronxy/X5S-2E/Configuration.h
@ -752,9 +752,15 @@
 #define DEFAULT_RETRACT_ACCELERATION  1000    // E acceleration for retracts
 #define DEFAULT_TRAVEL_ACCELERATION   1000    // X, Y, Z acceleration for travel (non printing) moves
-//
+/**
-// Use Junction Deviation instead of traditional Jerk Limiting
+ * Junction Deviation
-//
+ *
 * Use Junction Deviation instead of traditional Jerk Limiting
 *
 * See:
 *   https://reprap.org/forum/read.php?1,739819
 *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 //#define JUNCTION_DEVIATION
 #if ENABLED(JUNCTION_DEVIATION)
  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
--- a/config/examples/Tronxy/X5S/Configuration.h
+++ b/config/examples/Tronxy/X5S/Configuration.h
@ -731,9 +731,15 @@
 #define DEFAULT_RETRACT_ACCELERATION  1000    // E acceleration for retracts
 #define DEFAULT_TRAVEL_ACCELERATION   1000    // X, Y, Z acceleration for travel (non printing) moves
-//
+/**
-// Use Junction Deviation instead of traditional Jerk Limiting
+ * Junction Deviation
-//
+ *
 * Use Junction Deviation instead of traditional Jerk Limiting
 *
 * See:
 *   https://reprap.org/forum/read.php?1,739819
 *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 //#define JUNCTION_DEVIATION
 #if ENABLED(JUNCTION_DEVIATION)
  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
--- a/config/examples/Tronxy/XY100/Configuration.h
+++ b/config/examples/Tronxy/XY100/Configuration.h
@ -742,9 +742,15 @@
 #define DEFAULT_RETRACT_ACCELERATION  3000    // E acceleration for retracts
 #define DEFAULT_TRAVEL_ACCELERATION   3000    // X, Y, Z acceleration for travel (non printing) moves
-//
+/**
-// Use Junction Deviation instead of traditional Jerk Limiting
+ * Junction Deviation
-//
+ *
 * Use Junction Deviation instead of traditional Jerk Limiting
 *
 * See:
 *   https://reprap.org/forum/read.php?1,739819
 *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 //#define JUNCTION_DEVIATION
 #if ENABLED(JUNCTION_DEVIATION)
  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
--- a/config/examples/UltiMachine/Archim1/Configuration.h
+++ b/config/examples/UltiMachine/Archim1/Configuration.h
@ -731,9 +731,15 @@
 #define DEFAULT_RETRACT_ACCELERATION  3000    // E acceleration for retracts
 #define DEFAULT_TRAVEL_ACCELERATION   3000    // X, Y, Z acceleration for travel (non printing) moves
-//
+/**
-// Use Junction Deviation instead of traditional Jerk Limiting
+ * Junction Deviation
-//
+ *
 * Use Junction Deviation instead of traditional Jerk Limiting
 *
 * See:
 *   https://reprap.org/forum/read.php?1,739819
 *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 //#define JUNCTION_DEVIATION
 #if ENABLED(JUNCTION_DEVIATION)
  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
--- a/config/examples/UltiMachine/Archim2/Configuration.h
+++ b/config/examples/UltiMachine/Archim2/Configuration.h
@ -731,9 +731,15 @@
 #define DEFAULT_RETRACT_ACCELERATION  3000    // E acceleration for retracts
 #define DEFAULT_TRAVEL_ACCELERATION   3000    // X, Y, Z acceleration for travel (non printing) moves
-//
+/**
-// Use Junction Deviation instead of traditional Jerk Limiting
+ * Junction Deviation
-//
+ *
 * Use Junction Deviation instead of traditional Jerk Limiting
 *
 * See:
 *   https://reprap.org/forum/read.php?1,739819
 *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 //#define JUNCTION_DEVIATION
 #if ENABLED(JUNCTION_DEVIATION)
  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
--- a/config/examples/VORONDesign/Configuration.h
+++ b/config/examples/VORONDesign/Configuration.h
@ -740,9 +740,15 @@
 #define DEFAULT_RETRACT_ACCELERATION  3000    // E acceleration for retracts
 #define DEFAULT_TRAVEL_ACCELERATION   3000    // X, Y, Z acceleration for travel (non printing) moves
-//
+/**
-// Use Junction Deviation instead of traditional Jerk Limiting
+ * Junction Deviation
-//
+ *
 * Use Junction Deviation instead of traditional Jerk Limiting
 *
 * See:
 *   https://reprap.org/forum/read.php?1,739819
 *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 //#define JUNCTION_DEVIATION
 #if ENABLED(JUNCTION_DEVIATION)
  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
--- a/config/examples/Velleman/K8200/Configuration.h
+++ b/config/examples/Velleman/K8200/Configuration.h
@ -760,9 +760,15 @@
 #define DEFAULT_RETRACT_ACCELERATION  1000    // E acceleration for retracts
 #define DEFAULT_TRAVEL_ACCELERATION   1000    // X, Y, Z acceleration for travel (non printing) moves
-//
+/**
-// Use Junction Deviation instead of traditional Jerk Limiting
+ * Junction Deviation
-//
+ *
 * Use Junction Deviation instead of traditional Jerk Limiting
 *
 * See:
 *   https://reprap.org/forum/read.php?1,739819
 *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 //#define JUNCTION_DEVIATION
 #if ENABLED(JUNCTION_DEVIATION)
  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
--- a/config/examples/Velleman/K8400/Configuration.h
+++ b/config/examples/Velleman/K8400/Configuration.h
@ -731,9 +731,15 @@
 #define DEFAULT_RETRACT_ACCELERATION  6000    // E acceleration for retracts
 #define DEFAULT_TRAVEL_ACCELERATION   3000    // X, Y, Z acceleration for travel (non printing) moves
-//
+/**
-// Use Junction Deviation instead of traditional Jerk Limiting
+ * Junction Deviation
-//
+ *
 * Use Junction Deviation instead of traditional Jerk Limiting
 *
 * See:
 *   https://reprap.org/forum/read.php?1,739819
 *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 //#define JUNCTION_DEVIATION
 #if ENABLED(JUNCTION_DEVIATION)
  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
--- a/config/examples/Velleman/K8400/Dual-head/Configuration.h
+++ b/config/examples/Velleman/K8400/Dual-head/Configuration.h
@ -731,9 +731,15 @@
 #define DEFAULT_RETRACT_ACCELERATION  6000    // E acceleration for retracts
 #define DEFAULT_TRAVEL_ACCELERATION   3000    // X, Y, Z acceleration for travel (non printing) moves
-//
+/**
-// Use Junction Deviation instead of traditional Jerk Limiting
+ * Junction Deviation
-//
+ *
 * Use Junction Deviation instead of traditional Jerk Limiting
 *
 * See:
 *   https://reprap.org/forum/read.php?1,739819
 *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 //#define JUNCTION_DEVIATION
 #if ENABLED(JUNCTION_DEVIATION)
  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
--- a/config/examples/WASP/PowerWASP/Configuration.h
+++ b/config/examples/WASP/PowerWASP/Configuration.h
@ -750,9 +750,15 @@
 #define DEFAULT_RETRACT_ACCELERATION  500    // E acceleration for retracts
 #define DEFAULT_TRAVEL_ACCELERATION   3000    // X, Y, Z acceleration for travel (non printing) moves
-//
+/**
-// Use Junction Deviation instead of traditional Jerk Limiting
+ * Junction Deviation
-//
+ *
 * Use Junction Deviation instead of traditional Jerk Limiting
 *
 * See:
 *   https://reprap.org/forum/read.php?1,739819
 *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 //#define JUNCTION_DEVIATION
 #if ENABLED(JUNCTION_DEVIATION)
  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
--- a/config/examples/Wanhao/Duplicator
+++ b/config/examples/Wanhao/Duplicator
@ -741,9 +741,15 @@
 #define DEFAULT_RETRACT_ACCELERATION  1500    // E acceleration for retracts
 #define DEFAULT_TRAVEL_ACCELERATION   3000    // X, Y, Z acceleration for travel (non printing) moves
-//
+/**
-// Use Junction Deviation instead of traditional Jerk Limiting
+ * Junction Deviation
-//
+ *
 * Use Junction Deviation instead of traditional Jerk Limiting
 *
 * See:
 *   https://reprap.org/forum/read.php?1,739819
 *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 //#define JUNCTION_DEVIATION
 #if ENABLED(JUNCTION_DEVIATION)
  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
--- a/config/examples/adafruit/ST7565/Configuration.h
+++ b/config/examples/adafruit/ST7565/Configuration.h
@ -731,9 +731,15 @@
 #define DEFAULT_RETRACT_ACCELERATION  3000    // E acceleration for retracts
 #define DEFAULT_TRAVEL_ACCELERATION   3000    // X, Y, Z acceleration for travel (non printing) moves
-//
+/**
-// Use Junction Deviation instead of traditional Jerk Limiting
+ * Junction Deviation
-//
+ *
 * Use Junction Deviation instead of traditional Jerk Limiting
 *
 * See:
 *   https://reprap.org/forum/read.php?1,739819
 *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 //#define JUNCTION_DEVIATION
 #if ENABLED(JUNCTION_DEVIATION)
  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
--- a/config/examples/delta/Anycubic/Kossel/Configuration.h
+++ b/config/examples/delta/Anycubic/Kossel/Configuration.h
@ -861,9 +861,15 @@
 #define DEFAULT_RETRACT_ACCELERATION  3000    // E acceleration for retracts
 #define DEFAULT_TRAVEL_ACCELERATION   3000    // X, Y, Z acceleration for travel (non printing) moves
-//
+/**
-// Use Junction Deviation instead of traditional Jerk Limiting
+ * Junction Deviation
-//
+ *
 * Use Junction Deviation instead of traditional Jerk Limiting
 *
 * See:
 *   https://reprap.org/forum/read.php?1,739819
 *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 //#define JUNCTION_DEVIATION
 #if ENABLED(JUNCTION_DEVIATION)
  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
--- a/config/examples/delta/FLSUN/auto_calibrate/Configuration.h
+++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration.h
@ -813,9 +813,15 @@
 #define DEFAULT_RETRACT_ACCELERATION  3000    // E acceleration for retracts
 #define DEFAULT_TRAVEL_ACCELERATION   3000    // X, Y, Z acceleration for travel (non printing) moves
-//
+/**
-// Use Junction Deviation instead of traditional Jerk Limiting
+ * Junction Deviation
-//
+ *
 * Use Junction Deviation instead of traditional Jerk Limiting
 *
 * See:
 *   https://reprap.org/forum/read.php?1,739819
 *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 //#define JUNCTION_DEVIATION
 #if ENABLED(JUNCTION_DEVIATION)
  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
--- a/config/examples/delta/FLSUN/kossel/Configuration.h
+++ b/config/examples/delta/FLSUN/kossel/Configuration.h
@ -813,9 +813,15 @@
 #define DEFAULT_RETRACT_ACCELERATION  3000    // E acceleration for retracts
 #define DEFAULT_TRAVEL_ACCELERATION   3000    // X, Y, Z acceleration for travel (non printing) moves
-//
+/**
-// Use Junction Deviation instead of traditional Jerk Limiting
+ * Junction Deviation
-//
+ *
 * Use Junction Deviation instead of traditional Jerk Limiting
 *
 * See:
 *   https://reprap.org/forum/read.php?1,739819
 *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 //#define JUNCTION_DEVIATION
 #if ENABLED(JUNCTION_DEVIATION)
  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
--- a/config/examples/delta/FLSUN/kossel_mini/Configuration.h
+++ b/config/examples/delta/FLSUN/kossel_mini/Configuration.h
@ -813,9 +813,15 @@
 #define DEFAULT_RETRACT_ACCELERATION  3000    // E acceleration for retracts
 #define DEFAULT_TRAVEL_ACCELERATION   3000    // X, Y, Z acceleration for travel (non printing) moves
-//
+/**
-// Use Junction Deviation instead of traditional Jerk Limiting
+ * Junction Deviation
-//
+ *
 * Use Junction Deviation instead of traditional Jerk Limiting
 *
 * See:
 *   https://reprap.org/forum/read.php?1,739819
 *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 //#define JUNCTION_DEVIATION
 #if ENABLED(JUNCTION_DEVIATION)
  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
--- a/config/examples/delta/Geeetech/Rostock
+++ b/config/examples/delta/Geeetech/Rostock
@ -803,9 +803,15 @@
 #define DEFAULT_RETRACT_ACCELERATION  3000    // E acceleration for retracts
 #define DEFAULT_TRAVEL_ACCELERATION   3000    // X, Y, Z acceleration for travel (non printing) moves
-//
+/**
-// Use Junction Deviation instead of traditional Jerk Limiting
+ * Junction Deviation
-//
+ *
 * Use Junction Deviation instead of traditional Jerk Limiting
 *
 * See:
 *   https://reprap.org/forum/read.php?1,739819
 *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 //#define JUNCTION_DEVIATION
 #if ENABLED(JUNCTION_DEVIATION)
  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
--- a/config/examples/delta/Hatchbox_Alpha/Configuration.h
+++ b/config/examples/delta/Hatchbox_Alpha/Configuration.h
@ -818,9 +818,15 @@
 #define DEFAULT_RETRACT_ACCELERATION  3000    // E acceleration for retracts
 #define DEFAULT_TRAVEL_ACCELERATION   3000    // X, Y, Z acceleration for travel (non printing) moves
-//
+/**
-// Use Junction Deviation instead of traditional Jerk Limiting
+ * Junction Deviation
-//
+ *
 * Use Junction Deviation instead of traditional Jerk Limiting
 *
 * See:
 *   https://reprap.org/forum/read.php?1,739819
 *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 //#define JUNCTION_DEVIATION
 #if ENABLED(JUNCTION_DEVIATION)
  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
--- a/config/examples/delta/MKS/SBASE/Configuration.h
+++ b/config/examples/delta/MKS/SBASE/Configuration.h
@ -803,9 +803,15 @@
 #define DEFAULT_RETRACT_ACCELERATION  3000    // E acceleration for retracts
 #define DEFAULT_TRAVEL_ACCELERATION   3000    // X, Y, Z acceleration for travel (non printing) moves
-//
+/**
-// Use Junction Deviation instead of traditional Jerk Limiting
+ * Junction Deviation
-//
+ *
 * Use Junction Deviation instead of traditional Jerk Limiting
 *
 * See:
 *   https://reprap.org/forum/read.php?1,739819
 *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 //#define JUNCTION_DEVIATION
 #if ENABLED(JUNCTION_DEVIATION)
  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
--- a/config/examples/delta/Tevo
+++ b/config/examples/delta/Tevo
@ -807,9 +807,15 @@
 #define DEFAULT_RETRACT_ACCELERATION  3000    // E acceleration for retracts
 #define DEFAULT_TRAVEL_ACCELERATION   5000    // X, Y, Z acceleration for travel (non printing) moves
-//
+/**
-// Use Junction Deviation instead of traditional Jerk Limiting
+ * Junction Deviation
-//
+ *
 * Use Junction Deviation instead of traditional Jerk Limiting
 *
 * See:
 *   https://reprap.org/forum/read.php?1,739819
 *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 //#define JUNCTION_DEVIATION
 #if ENABLED(JUNCTION_DEVIATION)
  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
--- a/config/examples/delta/generic/Configuration.h
+++ b/config/examples/delta/generic/Configuration.h
@ -803,9 +803,15 @@
 #define DEFAULT_RETRACT_ACCELERATION  3000    // E acceleration for retracts
 #define DEFAULT_TRAVEL_ACCELERATION   3000    // X, Y, Z acceleration for travel (non printing) moves
-//
+/**
-// Use Junction Deviation instead of traditional Jerk Limiting
+ * Junction Deviation
-//
+ *
 * Use Junction Deviation instead of traditional Jerk Limiting
 *
 * See:
 *   https://reprap.org/forum/read.php?1,739819
 *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 //#define JUNCTION_DEVIATION
 #if ENABLED(JUNCTION_DEVIATION)
  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
--- a/config/examples/delta/kossel_mini/Configuration.h
+++ b/config/examples/delta/kossel_mini/Configuration.h
@ -803,9 +803,15 @@
 #define DEFAULT_RETRACT_ACCELERATION  3000    // E acceleration for retracts
 #define DEFAULT_TRAVEL_ACCELERATION   3000    // X, Y, Z acceleration for travel (non printing) moves
-//
+/**
-// Use Junction Deviation instead of traditional Jerk Limiting
+ * Junction Deviation
-//
+ *
 * Use Junction Deviation instead of traditional Jerk Limiting
 *
 * See:
 *   https://reprap.org/forum/read.php?1,739819
 *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 //#define JUNCTION_DEVIATION
 #if ENABLED(JUNCTION_DEVIATION)
  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
--- a/config/examples/delta/kossel_pro/Configuration.h
+++ b/config/examples/delta/kossel_pro/Configuration.h
@ -796,9 +796,15 @@
 #define DEFAULT_RETRACT_ACCELERATION  3000    // E acceleration for retracts
 #define DEFAULT_TRAVEL_ACCELERATION   3000    // X, Y, Z acceleration for travel (non printing) moves
-//
+/**
-// Use Junction Deviation instead of traditional Jerk Limiting
+ * Junction Deviation
-//
+ *
 * Use Junction Deviation instead of traditional Jerk Limiting
 *
 * See:
 *   https://reprap.org/forum/read.php?1,739819
 *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 //#define JUNCTION_DEVIATION
 #if ENABLED(JUNCTION_DEVIATION)
  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
--- a/config/examples/delta/kossel_xl/Configuration.h
+++ b/config/examples/delta/kossel_xl/Configuration.h
@ -806,9 +806,15 @@
 #define DEFAULT_RETRACT_ACCELERATION  3000    // E acceleration for retracts
 #define DEFAULT_TRAVEL_ACCELERATION   3000    // X, Y, Z acceleration for travel (non printing) moves
-//
+/**
-// Use Junction Deviation instead of traditional Jerk Limiting
+ * Junction Deviation
-//
+ *
 * Use Junction Deviation instead of traditional Jerk Limiting
 *
 * See:
 *   https://reprap.org/forum/read.php?1,739819
 *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 //#define JUNCTION_DEVIATION
 #if ENABLED(JUNCTION_DEVIATION)
  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
--- a/config/examples/gCreate/gMax1.5+/Configuration.h
+++ b/config/examples/gCreate/gMax1.5+/Configuration.h
@ -744,9 +744,15 @@
 #define DEFAULT_RETRACT_ACCELERATION   400    // E acceleration for retracts
 #define DEFAULT_TRAVEL_ACCELERATION    400    // X, Y, Z acceleration for travel (non printing) moves
-//
+/**
-// Use Junction Deviation instead of traditional Jerk Limiting
+ * Junction Deviation
-//
+ *
 * Use Junction Deviation instead of traditional Jerk Limiting
 *
 * See:
 *   https://reprap.org/forum/read.php?1,739819
 *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 //#define JUNCTION_DEVIATION
 #if ENABLED(JUNCTION_DEVIATION)
  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
--- a/config/examples/makibox/Configuration.h
+++ b/config/examples/makibox/Configuration.h
@ -734,9 +734,15 @@
 #define DEFAULT_RETRACT_ACCELERATION  3000    // E acceleration for retracts
 #define DEFAULT_TRAVEL_ACCELERATION   3000    // X, Y, Z acceleration for travel (non printing) moves
-//
+/**
-// Use Junction Deviation instead of traditional Jerk Limiting
+ * Junction Deviation
-//
+ *
 * Use Junction Deviation instead of traditional Jerk Limiting
 *
 * See:
 *   https://reprap.org/forum/read.php?1,739819
 *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 //#define JUNCTION_DEVIATION
 #if ENABLED(JUNCTION_DEVIATION)
  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
--- a/config/examples/tvrrug/Round2/Configuration.h
+++ b/config/examples/tvrrug/Round2/Configuration.h
@ -726,9 +726,15 @@
 #define DEFAULT_RETRACT_ACCELERATION  3000   // E acceleration for retracts
 #define DEFAULT_TRAVEL_ACCELERATION   500    // X, Y, Z acceleration for travel (non printing) moves
-//
+/**
-// Use Junction Deviation instead of traditional Jerk Limiting
+ * Junction Deviation
-//
+ *
 * Use Junction Deviation instead of traditional Jerk Limiting
 *
 * See:
 *   https://reprap.org/forum/read.php?1,739819
 *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 //#define JUNCTION_DEVIATION
 #if ENABLED(JUNCTION_DEVIATION)
  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
--- a/Show More
+++ b/Show More