microlab
/
scube
1
1
Fork 0
Code Issues Pull Requests Releases Activity

Commit Graph

  • 50cde90324 Added support for dual Z axis stepper drivers Enchiridion 2012-08-04 00:32:26 -0600
  • 603a5e25b3 Updated german translations in language.h and eliminated a few double lines. kobaan 2012-07-16 14:26:28 +0300
  • 538189cc19 Fixed soft limits when the origin is in the middle. HOME_POS is now always where the endstop is and can be outside the limits. The limits are now defined by MIN_POS and MAX_POS rather than HOME_POS and MAX_LENGTH. The Z is axis now homed first if direction is away from the bed. Chris Palmer 2012-06-02 13:17:47 +0100
  • 686011a548 Fixed typo ErikZalm 2012-07-14 17:25:35 +0300
  • cd57bf305b Merge git://github.com/daid/Marlin into Marlin_v1 Added invert step pins to corexy code Erik van der Zalm 2012-07-14 15:07:14 +0200
  • ea2c19f978 Added CoreXY support (Thanks Ilan Moyer) Erik van der Zalm 2012-07-14 14:21:53 +0200
  • aa65fe22ed decoupled axes sucessfully at least on pure x or y jog Erik van der Zalm 2012-07-14 13:43:19 +0200
  • 12de8fff81 Support step motor controllers with active low step pins. daid 2012-06-29 16:27:47 +0200
  • b67dacdc8f Fixed AD595 define Erik van der Zalm 2012-06-11 17:33:42 +0200
  • d3002ef741 corrected retract Bernhard 2012-06-03 16:56:40 +0200
  • 0c123950e9 __ header file replace Bernhard 2012-06-02 20:44:17 +0200
  • bf077125b9 added firmware retract. disabled by default Bernhard 2012-06-02 20:32:28 +0200
  • 88d2a671cc readme corrected Bernhard 2012-06-02 14:14:36 +0200
  • 0e5e249ab5 added individual pullup setting option to have finer control in case there is a special z-min sensor, for example Bernhard 2012-06-02 13:47:50 +0200
  • e792d62f47 readme Bernhard 2012-06-02 13:44:38 +0200
  • 6b14f95b3e Merge pull request #170 from linagee/Marlin_v1 Bernhard Kubicek 2012-06-02 03:46:56 -0700
  • c7ce99d495 Merge pull request #172 from daid/Marlin_v1 Bernhard Kubicek 2012-06-02 03:44:03 -0700
  • b7fc14bc65 repaired thermistortable_6 by graphcial fitting of the off-slope values. see issue 179. Erik, I know you asked for no changes, but this file probably is not related and hopefully allright. Bernhard Kubicek 2012-05-30 14:14:36 +0300
  • 9e1021efbe Fixed SL bug. ErikZalm 2012-05-28 22:32:53 +0300
  • e9bec9b6fe Fixed E1_ENABLE pin for Ultimaker. This was wrong for the 1.5.4 and 1.5.3 PCB (I cannot check the 1.5.6) Daid 2012-05-24 18:36:55 +0200
  • fbd282b3ba Update Marlin/Configuration.h linagee 2012-05-20 13:19:28 -0600
  • 2e8c5049c5 Update Marlin/thermistortables.h linagee 2012-05-20 13:18:45 -0600
  • 2d0d8e5272 Small correction. linagee 2012-05-20 11:09:07 -0600
  • 4d7fe7115f Changed M401 to M0/M1 as suggested, so they match normal CNC stop commands. Daid 2012-05-20 14:37:30 +0200
  • 9e9db65c3f Update Marlin/thermistortables.h linagee 2012-05-20 05:51:29 -0600
  • bd966ef389 Update Marlin/thermistortables.h linagee 2012-05-20 05:49:01 -0600
  • 775da3f103 Added top ratings and extended to ADC=1 for table 3 and 5. linagee 2012-05-20 05:35:57 -0600
  • 96a4baa0be Update Marlin/thermistortables.h linagee 2012-05-20 04:55:22 -0600
  • 2aa9f7b131 Update Marlin/thermistortables.h linagee 2012-05-20 04:35:28 -0600
  • c4490f5f3d Update Marlin/Configuration.h linagee 2012-05-20 04:27:52 -0600
  • dd9144994e Tested May 19 - It works! Verified with separate thermocouple TM-902C also. linagee 2012-05-20 04:13:29 -0600
  • 4c37d0d9f1 Extended range above 250C. (Operating range states up to 300C) linagee 2012-05-20 04:01:30 -0600
  • b59724e42b Add strigification for extruder amount in M115 report. Daid 2012-05-19 19:01:14 +0200
  • 16413bb8f2 Last M401 update, refresh the LCD during an M401 wait. Daid 2012-05-19 18:53:56 +0200
  • b3941fce5c Update after testing Daid 2012-05-19 18:48:43 +0200
  • d494688565 Do not initialize in the header file. Daid 2012-05-19 17:57:52 +0200
  • 516ec90242 Add M401 - Wait for user on LCD button press Daid 2012-05-19 17:54:07 +0200
  • 7244aa7eb7 Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1 Daid 2012-05-19 17:38:46 +0200
  • de2ca3b2e8 Grammar correction. linagee 2012-05-19 07:40:35 -0600
  • c2fc466e1b Update Marlin/Configuration.h linagee 2012-05-19 05:56:17 -0600
  • 241f5a4c0e Update Marlin/thermistortables.h linagee 2012-05-19 05:52:12 -0600
  • 9f9f498491 Update Marlin/Configuration.h linagee 2012-05-19 05:47:30 -0600
  • e31bef31ad Limit PID autotune PWM to PID_MAX Erik van der Zalm 2012-05-16 19:32:23 +0200
  • b2a9ccdb97 Merge pull request #159 from MaikStohn/Marlin_v1 ErikZalm 2012-05-16 12:32:35 -0700
  • d459fb41b7 Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1 Erik van der Zalm 2012-05-16 19:22:08 +0200
  • 804e0d6117 Merge pull request #164 from guanix/Marlin_v1 ErikZalm 2012-05-16 12:21:48 -0700
  • ba96059203 add additional dropsegments test Erik van der Zalm 2012-05-16 19:21:44 +0200
  • bb499421e9 Merge pull request #166 from zittix/Marlin_v1 ErikZalm 2012-05-16 12:00:22 -0700
  • fbd91ab0b5 Fixes #153 for bad call to abs() zittix 2012-05-16 18:17:34 +0200
  • b51c06e2b3 Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1 MaikStohn 2012-05-11 16:57:08 +0200
  • 159ae90874 bug fix for scrolling of main menu when using SMALL_DISPLAY (2 lines only) MaikStohn 2012-05-11 15:23:10 +0200
  • e48f5aa6a7 fixed typo MaikStohn 2012-05-11 15:22:06 +0200
  • 1efe9ab497 changed encoder pos from int to long to fix problems setting x/y/z/e stepps_per_mm using the lcd menu MaikStohn 2012-05-11 15:19:09 +0200
  • 602c8ee02b Melzi support Guan Yang 2012-04-27 11:28:10 -0400
  • 279d00da9f Fixed #if for Ultimaker. Daid 2012-05-09 10:50:44 +0200
  • 830972ce3c Merge pull request #1 from ErikDeBruijn/Marlin_v1_Ultimaker-rc3 daid 2012-05-09 01:35:59 -0700
  • 451f9cc6d1 Residual in the comments: there are no more mm/minutes but only mm/sec in the planner buffer. Bernhard Kubicek 2012-05-09 08:05:13 +0300
  • e3fe1f0d00 Made a more granular configuration possible PREVENT_LENGTHY_EXTRUDE. You can now decide to allow/disallow large length of extrusions to be executed. Erik de Bruijn 2012-05-08 17:27:45 +0200
  • d88205d89d Suggestion to improve (TODO), no actual code changed Erik de Bruijn 2012-05-08 17:18:31 +0200
  • 5aa80e6c05 Made language.h more flexible. Automatically do the right defines based on MOTHERBOARD == 7 ? "Ultimaker" : "Mendel" Erik de Bruijn 2012-05-08 17:32:50 +0200
  • b657a18449 Revert "magic PROGMEM defines to avoid hundreds of wrong GCC warnings" MaikStohn 2012-05-04 12:24:07 +0200
  • 108011085b futher docu of M500 Bernhard Kubicek 2012-05-04 08:37:49 +0300
  • d188ae4c9d added missing declaration of buttons_init() MaikStohn 2012-05-03 15:48:44 +0200
  • 3682d9bd5b magic PROGMEM defines to avoid hundreds of wrong GCC warnings MaikStohn 2012-05-03 15:43:23 +0200
  • 032df0b2c6 Moved LCD initialization out of constructor MaikStohn 2012-05-03 14:28:17 +0200
  • bd1ad7c76a explicit includes to make it compile with AVRStudio/Eclipse MaikStohn 2012-05-03 14:22:43 +0200
  • 060b38de5c delete obsolete and wrong code MaikStohn 2012-05-03 14:15:46 +0200
  • 789ba02d43 fixed typo in comment MaikStohn 2012-05-03 14:13:53 +0200
  • 1874cb71a6 Added option to increase the FAN PWM frequency. Erik van der Zalm 2012-05-02 19:26:14 +0200
  • 6a5a34e0ff Small cleanup Erik van der Zalm 2012-04-30 13:37:49 +0200
  • e3821bd86f Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1 Erik van der Zalm 2012-04-30 13:36:27 +0200
  • 02af69911e Added temperature window to M109. This is needed for systems with no overshoot PID. Erik van der Zalm 2012-04-30 13:36:19 +0200
  • e203b8c754 Merge pull request #154 from daid/Marlin_v1 ErikZalm 2012-04-28 13:19:55 -0700
  • 362ddc4efc Merge pull request #155 from Atntias/patch-1 ErikZalm 2012-04-28 13:19:19 -0700
  • 58cad83253 Merge pull request #156 from Atntias/patch-2 ErikZalm 2012-04-28 13:19:00 -0700
  • c27081aa4a Fix to allow M120/M121 sefi 2012-04-28 17:35:51 +0300
  • e11e072eca adding M120 and 121 for turning on and off the endstops only for homing function sefi 2012-04-28 17:31:22 +0300
  • 8e68c6cf89 Show proper temperature for extruder 2 Daid 2012-04-27 15:00:01 +0200
  • 8503b78876 Added support for 2nd extruder temperature to UltraLCD Daid 2012-04-27 14:51:32 +0200
  • 8446c9dc92 Merge pull request #152 from loganb/Marlin_v1 Bernhard Kubicek 2012-04-25 22:23:31 -0700
  • 3eacb4c16d Wrap the call to turn off the bed heater in a #if to prevent a compile error on boards that do not have a bed heater Logan Bowers 2012-04-25 19:22:38 -0700
  • e4d2138dbd reinitialize the lcd, if the SD card is inserted or removed. It seems that LCDs can confused by electrical discharges from time to time. Since a removal or insert of the sd card takes a long time in firmware, just reinitializing the lcd does not hurt. actually, it solves a problem with the UltiControlle Bernhard 2012-04-22 21:12:17 +0200
  • 464b755918 added support for the UltiController Bernhard 2012-04-22 20:55:56 +0200
  • 44fd8d46d2 fixed quickhome Bernhard 2012-04-22 20:44:27 +0200
  • 33bb044d7c fixed catsting to (int)e in serial error messages. see https://github.com/ErikZalm/Marlin/issues/148 Bernhard 2012-04-22 20:04:39 +0200
  • ffea8008ca Update readme file Erik van der Zalm 2012-04-15 22:44:03 +0200
  • c2557abc03 Merge pull request #138 from triffid/fix-makefile ErikZalm 2012-04-15 10:21:46 -0700
  • 67cf105bc6 Fixed AUTOTEMP (M109 S215 B260 F1 starts autotemp) Changed SLOWDOWN. IF this does not work ok OLD_SLOWDOWN is the old algo. Erik van der Zalm 2012-04-15 19:17:33 +0200
  • 8aee9d51b6 Disabled disable_heater in PID_autotune. Erik van der Zalm 2012-04-12 21:12:31 +0200
  • 939f1fab46 Merge pull request #140 from daid/Marlin_v1 ErikZalm 2012-04-12 05:29:24 -0700
  • 414408b2d0 Fix for wrong systax in #ifdef. Daid 2012-04-12 14:01:30 +0200
  • 77d503fa13 Fix Makefile Michael Moon 2012-04-11 11:37:55 +1000
  • cf7c8c458f Fixed MAX6675 Erik van der Zalm 2012-04-10 21:57:57 +0200
  • 325f0651ac Merge pull request #136 from grrf/patch-1 ErikZalm 2012-04-10 09:48:45 -0700
  • 03b0850e63 This breaks temperature readout for pronterface! grrf 2012-04-09 23:37:34 +0300
  • 2a019a53d2 Merge pull request #134 from tgiphil/Marlin_v1 ErikZalm 2012-04-08 05:16:29 -0700
  • ad8bc71d3e - Fixed a typo tgiphil 2012-04-07 20:01:31 -0700
  • 46feae79c6 Fixed typo in arc Erik van der Zalm 2012-04-02 17:19:20 +0200
  • 4ca2f336f0 Changed default MINIMUM_PLANNER_SPEED -> 0.05 Fixed small bug in arcs M105 prints now actual_temp/target_temp Erik van der Zalm 2012-04-01 16:23:40 +0200
  • ae0bf8068b Fixed arc offset. Erik van der Zalm 2012-03-27 19:03:33 +0200