2461 Commits (ff178d8cf7dc4bb6e585862da37ae1bed2766356)

Author SHA1 Message Date
Scott Lahteine a4ca87ba99 Merge pull request #1933 from bq/Fix_stray_in_configuration
Fixed compilation error "error: stray ‘\357’ in program"
10 years ago
Scott Lahteine 5e3bb4bdf3 Merge pull request #1931 from paclema/M303_echo
Added new PID autotune info, to make easy copy & paste results to marlin
10 years ago
Ivan Galvez Junquera b99e63a7bf Fixed compilation error "error: stray ‘\357’ in program" in several configuration files.
Introduced in commit 697ee2dc and later spread to other files.
10 years ago
paclema 581685a231 Added new PID autotune info, to make easy copy & paste results to marlin 10 years ago
Chris Palmer 483384aaa4 Fixed faulty comment merge 10 years ago
Chris Palmer cc6b7cf3ce Fixed some comment spellings. 10 years ago
Chris Palmer e4595fa24a Fixed jump in speed when using high accelerations on axes with lots of steps.
I.e., when acceleration * steps per mm > 2,000,000.
This was done by changing MultiU24X24toH16 to take a 32b bit operand.
Removed the claim that stepper.cpp uses the Leib algorithm.
10 years ago
Scott Lahteine 63b98b8280 Raise Z for M401 and M402 10 years ago
Scott Lahteine 53be0f3399 Babystep delay 2us 10 years ago
paclema cde5eee2a5 Removed unnecessary comments 10 years ago
paclema e1b69db6d1 Fixed M48 mismatch between n and P parameter on documentation 10 years ago
Scott Lahteine 637babb99b Merge pull request #1915 from elgambitero/Development
Some minor translations to spanish
10 years ago
elgambitero cb9ac490d4 Some minor translations to spanish 10 years ago
CONSULitAS 3851ac6226 Example Configuration for K8200 back in sync
example_configurations\K8200\Configuration.h:
* merge upstream changes from default Configuration.h manually
* add some machine specific comments
10 years ago
CONSULitAS b447a4ffab Merge remote-tracking branch 'upstream/Development' into Development 10 years ago
Scott Lahteine 7336e6df07 Always define old_z, not always z2 10 years ago
Scott Lahteine 5dd87d2e74 Enable all old_z_*_endstop vars for Z_DUAL_ENDSTOPS
- Potentially addressing #1911
10 years ago
Scott Lahteine 3f02da646c Make sure axis_active is cleared for #1908 10 years ago
Scott Lahteine e0e68c5cbc Rename servos[] array in Marlin to servo[] 10 years ago
Scott Lahteine 642f6a92bc fix type of code_has_value 10 years ago
Scott Lahteine 17ad80c1e1 Spacing in XYZ_CONSTS 10 years ago
Scott Lahteine 09d60e0128 Naming and code comments 10 years ago
Mehmet Sutas 5a9e45cc4a Fix Syntax Error Filament Runout Statement 10 years ago
Scott Lahteine 257a907456 Fix typo in next_bed_check_ms 10 years ago
Scott Lahteine e4b1e8651b next_ vars faster than previous_
- Change some `previous_` time vars to `next_` so an add only happens
at intervals
- Fix `HEATER_0_USES_MAX6675` polling too frequently, or not at all
10 years ago
Scott Lahteine ccddc280be Apply three more commits 10 years ago
Scott Lahteine 74e4b42f7e Default MACHINE_NAME to "3D Printer" 10 years ago
Scott Lahteine 8857b9e921 Use the extruder argument in plan_buffer_line 10 years ago
Scott Lahteine ac2b23f574 Homing fixes
- Prevent `Z_SAFE_HOMING` from homing Z twice in some cases
- Allow `G28` with XYZ values of 0 to explicitly set the position
- Don’t add `home_offset` when setting XYZ explicitly in `G28`
- Add `code_has_value` function to check for the presence of a numeric
value (could just test for space or nul to allow other types of values)
10 years ago
Scott Lahteine 055b11814a Additional cleanup of ultralcd.cpp 10 years ago
Scott Lahteine 388dd0cfa5 Fix doubled lcd_quick_feedback
- MENU_ITEM causes lcd_quick_feedback to be called, so only those calls
to `lcd_goto_menu` outside of the `MENU_ITEM` macro need to set the
`feedback` flag when calling `lcd_goto_menu`.
10 years ago
Scott Lahteine c6bb98abad machine name for hephestos too 10 years ago
Scott Lahteine ccbe2c4ea3 Apply CUSTOM_MACHINE_NAME to configurations
- Replace “Mendel” with “RepRap”
10 years ago
Scott Lahteine 5fe382949b Some G-Codes comment cleanup 10 years ago
Scott Lahteine 8b16ebe705 Break out prevent_dangerous_extrude feature
- It’s inline here, but could be a macro and duplicated for
`planner.cpp`
10 years ago
Scott Lahteine 740152ee70 Merge branch 'Development' into cold_extrude
Latest upstream commits
10 years ago
Scott Lahteine 5914d9d7de Shuffling declarations.. 10 years ago
Scott Lahteine b328c6e6b6 Shuffling declarations. 10 years ago
Scott Lahteine fb4cefc91d Define lcd_move_[xyz] ahead of lcd_move_menu_axis 10 years ago
Scott Lahteine 9189cc66ab Fix moves for DELTA for MANUAL_BED_LEVELING
- Use `line_to_current` in place of `plan_buffer_line`
10 years ago
Scott Lahteine 7a1aef1450 Merge pull request #1877 from AnHardt/display-only
Made encoderPosition and quick_feedback dependant on NEWPANEL
10 years ago
Scott Lahteine 6096164d79 Merge pull request #1878 from thinkyhead/cold_extrude
Cold extrude
10 years ago
Scott Lahteine a488445cbe Fix spelling of "too" 10 years ago
Scott Lahteine b1950a7f25 Merge pull request #1875 from Natealus/Development
Z Probe inverting not present in example configs, causes error
10 years ago
AnHardt df50523605 Made encoderPosition and quick_feedback dependant on NEWPANEL
where the hardware is available.
Fix for #1873
10 years ago
Scott Lahteine 2ca099d1e7 Merge pull request #1876 from thinkyhead/cold_extrude
Catch dangerous extrude before trying several
10 years ago
Scott Lahteine 837ceb9abb Merge pull request #1867 from epatel/Development
Added sanity check for MESH_NUM_X_POINTS and MESH_NUM_Y_POINTS
10 years ago
Scott Lahteine a95544f92a Spell adjustment 10 years ago
Scott Lahteine a00ebf03d4 Merge pull request #1868 from AnHardt/LCD_STR
Moved the definitions of the LCD_STR_* to Conditionals.h
10 years ago
Scott Lahteine 1269c445ab Catch dangerous extrude before trying several 10 years ago
Natealus 585eee6549 Z Probe inverting not present in example configs, causes error
The line const bool Z_PROBE_ENDSTOP_INVERTING = false; // set to true to
invert the logic of the endstop is in the main configuration.h but
wasn't present in the example configuration.h's. Causes a compiling
error with Z Probe enabled. Just added it to all the configs. :)
10 years ago
AnHardt 540dbb35e2 And an other MSG_BED in Marlin_main.cpp 10 years ago
AnHardt 14d4419e16 Replaced SERIAL_PROTOCOLPGM(MSG_BED) with SERIAL_PROTOCOLPGM("Bed")
Resolved some warnings in Marlin_main.cpp regarding compares of signed and unsigned integers by replacing 'int' or 'uint16_t' with 'uint8_t'.
10 years ago
AnHardt ea897654a4 Moved the definitions of the LCD_STR_* to Conditionals.h
to avoid errors in Marlin_main.cpp. #1860

In the include tree of Marlin_main.cpp the decision between the display types is not made.
To include the right LCD_STR_* ether 'dogm_lcd_implementation.h' or 'ultralcd_implementation_hitachi_HD44780.h' with all their code.
A 'dogm_lcd_implementation.h.h' would be a curiosity.
So i moved both of the definition blocks to conditionals.h

On the long term it could make sense to use the same numbering for the u8glib and the hitachi symbols.
10 years ago
Edward Patel 7dc64efe67 Added sanity check for MESH_NUM_X_POINTS and MESH_NUM_Y_POINTS 10 years ago
AnHardt 6a514f3dc9 Aplied HAS_LCD_CONTRAST also to Marlin_main.cpp
and cleaned typo.
10 years ago
AnHardt a76fb42ca6 Merge https://github.com/MarlinFirmware/Marlin into contrast 10 years ago
AnHardt bcc04192fc Remove Contrast Menu for U8GLIB_ST7920
The other two devices we use in u8glib have more than only dummy code.
Checked this in the library code.
10 years ago
Scott Lahteine 4788b59300 Thermistor values for configurator 10 years ago
Scott Lahteine bb917ecda8 Merge pull request #1853 from thinkyhead/dev_version
Set version to "1.0.3 dev"
10 years ago
Scott Lahteine caa7734402 Merge pull request #1864 from thinkyhead/is_running
IsStopped / IsRunning inline
10 years ago
Scott Lahteine 3162971cd6 current_position not static 10 years ago
Scott Lahteine 27cb90da8b IsStopped / IsRunning inline 10 years ago
Max 07fc2b5b70 Update language_ru.h 10 years ago
Scott Lahteine 756bb5e268 Cleanup formatting in hitachi & dogm lcd 10 years ago
Scott Lahteine 7431ef7e2d Merge branch 'Development' into dev_version
Latest upstream commits
10 years ago
Scott Lahteine 43773ff735 Formatting and lcd contrast masking 10 years ago
Scott Lahteine eb6e3886f4 Set version to "1.0.3 dev" 10 years ago
Scott Lahteine cf9b58452c Minimum delay in menu click feedback
Squished #1849
10 years ago
Scott Lahteine 1d291be2ba Fix de after PREVENT_DANGEROUS_EXTRUDE
- Set `de` to 0 when `position[E] = target[E]`
- Address regression mention in #1846
10 years ago
Scott Lahteine e03da4805b Merge pull request #1774 from epatel/Development
Mesh bed leveling: Added G29 S3 + finer display steps during manual input + bug fix
10 years ago
Scott Lahteine f7c4e7e19f Fix G29 not deploying in some instances 10 years ago
Edward Patel a9ed39b12d Moved checks into SanityCheck.h + removed previous added checks. 10 years ago
Edward Patel 002340f32c Merge branch 'Development-Marlin' into Development 10 years ago
Scott Lahteine c379f17117 Encapsulate setting of homing_bump_feedrate 10 years ago
Scott Lahteine 7d2c2f1790 Updates for the configurator
- Sections in all `Configuration_adv.h`
- Recognize JAPANESE/WESTERN/CYRILLIC options
- Better capturing of comments for tooltips
10 years ago
Scott Lahteine 967db181d0 Latest upstream commits 10 years ago
Scott Lahteine e502144eda Fixup formatting of last commit 10 years ago
Scott Lahteine d05efa008d Merge pull request #1825 from shaggythesheep/bugfix_no_heaters
Bugfix: Temperature checks when no heaters in use
10 years ago
Scott Lahteine d20f42c883 Don't stow the probe until the last grid point!
- Address Issue #1682 at hash #issuecomment-89756858
10 years ago
Scott Lahteine 5c2bb05af3 Merge pull request #1839 from AnHardt/fix-statusmessage
Fix lcd_status_message
10 years ago
Scott Lahteine d70a4a3847 Merge pull request #1823 from AnHardt/splashscreen
Disable splash-screen when done once
10 years ago
Scott Lahteine 56aea5f8e5 Merge pull request #1829 from Natealus/Development
Azteeg X3 Pro Pin fix ups
10 years ago
Scott Lahteine 6a860b99dc Merge pull request #1828 from Wackerbarth/Configurator
Update Configurator Files
10 years ago
AnHardt ac843fbf3b Fix lcd_status_message
Because we now can use utf8 with up to 3 bytes per symbol,
lcd_status_message[] must be 3*LCD_WIDTH wide.
Filling up the message, or cutting to length, are fixed to.

Fix for #1832 about at the end.
10 years ago
Scott Lahteine 6d084c017f Fix typo in FWRETRACT handler
Should be `retracting` and not `retract`
10 years ago
Edward Patel d27c82a450 Added check for Delta printers in Mesh, #error not yet supported. 10 years ago
Edward Patel 9a093b2e8f Added #error + mention not to enable ABL and Mesh at the same time 10 years ago
AnHardt 6ae714894e Now the simplycistic solution.
Just and only display splashscreen only once.
10 years ago
AnHardt d521693641 Revert "Draw content in display loop only when needed"
This reverts commit bf04a92cc0.
10 years ago
Natealus b6f2bff461 Azteeg X3 Pro Pin fix ups 10 years ago
Scott Lahteine d867c18535 Fix compile error with Z_DUAL_ENDSTOPS 10 years ago
Richard Wackerbarth 46474cf2f2 Incorporate @section headers from configurator 10 years ago
Richard Wackerbarth cf66cb8808 Bring configurator up-to-date 10 years ago
Richard Miles 1a5293c2ce Prevents MINTEMP / MAXTEMP when no heaters present
This commit checks whether or not HEATER_0 is in use, and if not, skips
the MIN / MAX temperature checks.
10 years ago
Edward Patel 5360158545 Merge branch 'Development-Marlin' into Development 10 years ago
AnHardt bf04a92cc0 Draw content in display loop only when needed
Example for splash screen.
10 years ago
AnHardt 9865318f1c Disable splash-screen when done once
Splash screen was shown with every display init.
That means every time the menus where entered.

Note the 2 in the initialisation.
The buffer is already written in two steps a 512 byte.
Without the 2 only the upper half is shown.
10 years ago
Scott Lahteine 53eb662908 Have the configurator read from MarlinFirmware repo 10 years ago
Edward Patel d24ea7c03f Added Comment in hope of github seeing these updates 10 years ago