1675 Commits (d0e24e0876c845c764e921287afce521966ce6f0)

Author SHA1 Message Date
AnHardt d0e24e0876 Adaptive screen updates for all kinds of displays
The target here is to update the screens of graphical and char base
displays as fast as possible, without draining the planner buffer too much.

For that measure the time it takes to draw and transfer one
(partial) screen to the display. Build a max. value from that.
Because ther can be large differences, depending on how much the display
updates are interrupted, the max value is decreased by one ms/s. This way
it can shrink again.
On the other side we keep track on how much time it takes to empty the
planner buffer.
Now we draw the next (partial) display update only then, when we do not
drain the planner buffer to much. We draw only when the time in the
buffer is two times larger than a update takes, or the buffer is empty anyway.

When we have begun to draw a screen we do not wait until the next 100ms
time slot comes. We draw the next partial screen as fast as possible, but
give the system a chance to refill the buffers a bit.

When we see, during drawing a screen, the screen contend has changed,
we stop the current draw and begin to draw the new content from the top.
8 years ago
Scott Lahteine 4bc6536f54 Move to safe zone on DELTA if using do_blocking_move_to* 8 years ago
esenapaj e9393c3634 Suppress warnings, etc
・Suppress warnings
・Remove unused variable "did_update"
8 years ago
Scott Lahteine 83c5026db1 Ignore homing button when SD printing
As suggested in #5404 by @android444
8 years ago
akaJes d7b948610a Experimental bilinear subdivision option 8 years ago
Scott Lahteine b203901143 Merge pull request #5393 from AnHardt/Fix-auto_report_temperatures
Fix auto_report_temperatures()
8 years ago
AnHardt 59a27ed27d Fix auto_report_temperatures()
The `auto_report_temperatures` needs a linefeed to be recognized by Repetier Host.
8 years ago
Scott Lahteine b6b100c471 Merge pull request #5371 from thinkyhead/rc_extruders_can_differ
Allow distinct factors for multiple extruders
8 years ago
Scott Lahteine 3391c785c6 Support for distinct E factors 8 years ago
Scott Lahteine c47e07d129 Fix Dual X software endstops 8 years ago
Scott Lahteine 4217e9653e Adjust park code in tool_change 8 years ago
Scott Lahteine b20405db31 Only DXC_AUTO_PARK_MODE should auto-move in tool_change 8 years ago
Scott Lahteine ca24af7d5d Dual X with home_z_safely is not parked 8 years ago
Scott Lahteine 0e15b4f434 Dual X set_axis_is_at_home can use x_home_pos for both 8 years ago
Scott Lahteine 54109dfaec Reduce code size for Dual X un-park 8 years ago
Scott Lahteine fe96f74db1 Use const arguments in Dual X helper functions 8 years ago
Scott Lahteine 41278c1e8b Apply LOGICAL_POSITION to home positions on Dual X 8 years ago
Scott Lahteine 053fb55af6 Fix modes ordering in prepare_move_to_destination_dualx 8 years ago
Scott Lahteine 56dd15c0ad Use SET_INPUT for PS_ON_PIN in kill 8 years ago
Scott Lahteine c06161b773 Use apply_leveling, not MBL directly 8 years ago
Scott Lahteine fccc97de6d Save PROGMEM with string changes
Unlike RAM-based strings, PROGMEM strings aren’t consolidated by the
compiler.
8 years ago
Scott Lahteine 27dd5acc22 Fix set_led_color for BLINKM
Follow-up to #5330
8 years ago
Scott Lahteine f60b4f8659 Allow case light pin to be active low 8 years ago
Scott Lahteine 65c50e062e Support for an RGB LED using 3 pins 8 years ago
Scott Lahteine 092e949b58 Merge pull request #5169 from thinkyhead/rc_core_inverted
Support for COREYX, COREZX, COREZY
8 years ago
Scott Lahteine c7935bb0d2 Merge pull request #5299 from thinkyhead/rc_bed_correction_fade
Add a fade factor for mesh leveling
8 years ago
Scott Lahteine 61437d988a Fix and optimize case-light code 8 years ago
Scott Lahteine f6f77d34a1 Add a fade factor for mesh leveling 8 years ago
Scott Lahteine 2e966f8e5b Patch Capabilities Report for "PROGRESS" 8 years ago
Scott Lahteine d891324830 Merge pull request #5258 from mosh1/mbl_speed_fix
Fix z feedrate value when doing mesh bed leveling. probe feedrate use…
8 years ago
Scott Lahteine 7f8133a51f Merge pull request #5255 from Kaibob2/CaseLightMenu
Case light menu (3rd attempt)
8 years ago
Kai 0c341f0c50 Added Menu entry for Case light 8 years ago
Scott Lahteine 3bc2273ac9 Comment M540 8 years ago
Scott Lahteine 14b74181f5 Merge pull request #5179 from thinkyhead/rc_TMC2130
TMC2130 "Silent StepStick" support
8 years ago
Scott Lahteine bb2114a060 Merge pull request #5264 from thinkyhead/rc_delta_safe_zone
Add an option for delta to home to the top
8 years ago
Scott Lahteine 9b96a4a53b Merge pull request #5246 from thinkyhead/rc_some_cleanup
Minor stepper cleanup
8 years ago
Scott Lahteine 3e0376b45e Reorder M114 and M119 gcode cases 8 years ago
Scott Lahteine 127e21ae00 Extend M122 for all steppers 8 years ago
Moritz d67c1d825f Add TMC2130 support 8 years ago
Scott Lahteine 11effeee2c Add an option for delta to home to the top 8 years ago
Moshen Chan 29b174bfb9 Fix z feedrate value when doing mesh bed leveling. probe feedrate uses XY_PROBE_SPEED 8 years ago
Scott Lahteine 87b6b19256 Patch CASE_LIGHT typo 8 years ago
Scott Lahteine 181cdb3cfe Move GCode list above include lines 8 years ago
Scott Lahteine eb120e518c Followup to new endstop interrupts feature
- Fix typos, verbiage
- Fix naming of `setup_endstop_interrupts`
- Some formatting, indentation, spacing
8 years ago
Scott Lahteine 832fe284b4 Merge pull request #5184 from AnHardt/endstop_interrupts
Introduce endstop interrupts
8 years ago
Scott Lahteine 98600e1433 Minor stepper cleanup 8 years ago
Florian Heilmann d08867986e Add autotemp capabilities to M104
This allows M104 to pass the F and B parameters to enable autotemp as well
8 years ago
Scott Lahteine 2330619da0 Merge pull request #5191 from petrzjunior/const
Replace const bool with #define for consistency
8 years ago
Petr Zahradník junior d7ce5d271b
Replace const bool with #define for consistency 8 years ago
Scott Lahteine 5d23e52d75 Merge pull request #5228 from thinkyhead/rc_keep_last_mix
Fix DIRECT_MIXING_IN_G1 to preserve the previous mix
8 years ago