Scott Lahteine
ad5638f78c
Cleanup some fastio code
8 years ago
Scott Lahteine
1519b0e7c1
Split up fastio.h, document pin mappings
8 years ago
Scott Lahteine
2823bf0874
Update fastio.h with special handling for Timer 2
8 years ago
Scott Lahteine
10da175be5
Fix a pair of compiler complaints
8 years ago
benlye
3ed737425d
Fix typo in new SET_COM macro
8 years ago
Scott Lahteine
ee46ce1743
Add and apply interrupt helper macros
8 years ago
Scott Lahteine
4542282f5e
Fix broken TOGGLE macro in fastio.h
8 years ago
Scott Lahteine
d567b426d5
Merge pull request #4894 from thinkyhead/rc_mightyboard_rev_e
...
Mightyboard Revision E preliminary support
8 years ago
Scott Lahteine
9cbedab91b
Use DPM where possible
8 years ago
Scott Lahteine
9dfd029911
Fix bug in fastio.h _GET_TIMER
8 years ago
Scott Lahteine
e6164d254d
Clean up GCode command short comments
8 years ago
Scott Lahteine
9d86c07702
Clean up some fastio.h spacing
8 years ago
Scott Lahteine
ab84ed22ca
No such thing as G6 and G7 pins
8 years ago
AnHardt
e4942d2163
Switch SD2cadrLib to fastio
...
Replace all fastDigitalRead/Write() with READ/WRITE()
Define SCK_PIN, MISO_PIN, MOSI_PIN in pins.h if not already defined in the pins_*.h files.
Remove these conditional pin definitions from the pin-files. They are now always defined.
Define separate sets of SPI-pins for AT90USB with and without Teensy support in fastio.h.
Likely this was the main reason for all that confusion about the AT90USB-SPI pins.
8 years ago
esenapaj
888443ca1e
Enclose all #error strings with apostrophes
9 years ago
Scott Lahteine
0da744b7b0
Further cleanup of comments, partial Doxygen-style
...
Following up on #3231
9 years ago
jbrazio
5e5d250832
Added gplv3 header to all Marlin files
9 years ago
Scott Lahteine
9bdab4f3a8
Clean up "else" and other spacing
9 years ago
Scott Lahteine
0c7f7ebcfb
Styling adjustments (PR#2668 & PR#2670)
...
Keep "astyled" reformatting
9 years ago
Scott Lahteine
c065da52ec
Spacing and spelling
10 years ago
Scott Lahteine
c37f7d15c9
- Rename WRITE_E_STEP for consistency
...
- Add BIT and TEST macros
- Add _APPLY_ macros to stepper.cpp to help with consolidation
- Consolidate code in stepper.cpp using macros
- Apply standards in stepper.cpp
- Use >= 0 instead of > -1 as a better semantic
- Replace DUAL_Y_CARRIAGE with Y_DUAL_STEPPER_DRIVERS
10 years ago
Scott Lahteine
dfb38874f8
Some suggested changes for #1555
10 years ago
Cylindric
d819c55395
Various typo fixes - only in comments, no code changes.
11 years ago
David Forrest
e8e0697e48
fastio.h: Add AT90USBxx_TEENSYPP_ASSIGNMENTS for teensyduino/Lincomatic/Printrboard compatibility.
11 years ago
Erik van der Zalm
bca353cc12
Fixed duplicate define in fastio.h
11 years ago
Steve Kelly
b42d24e31e
add additional pins to avr2560 for rambo lcd
11 years ago
Scott Lahteine
5dabc95409
Apply all changes from latest Marlin_V1
...
Diffed and merged, preserving my updates
12 years ago
Johann Rocholl
6aa87a7b67
Use the same fastio.h definition for AT90USB1286/7 and AT90USB646/7.
12 years ago
Johann Rocholl
ce4b5bbeaa
Add AT90USB646 support from Sprinter to fastio.h.
12 years ago
daid303
7a02ba361c
Header multiple include protection should match the filename, not just _ARDUINO_H, which is almost bound to go wrong some day.
12 years ago
Christian Thalhammer
d309565b56
Merge remote-tracking branch 'upstream/Marlin_v1' into Marlin_v1
...
Conflicts:
Marlin/Configuration.h
13 years ago
Erik van der Zalm
9173a5713b
Teensylu support.
13 years ago
Christian Thalhammer
59cc5f889e
- added support for ATMega1284P
13 years ago
Erik van der Zalm
e017228569
Merged multiple extruder support.
...
Soft PWM. (Sanguinololu can also have PID temperature control)
Interrupt save WRITE for addresses > 0x0FF
13 years ago
Denis B
4fd75dc813
Working version of multiple extruders (up to 3)
...
- The temperature control is pretty much complete
(not sure what to do w/ autotemp though)
Changed the pins assignment to clearly separate bed and extruder heaters
and temp sensors, changed a bit how termistor tables are handled.
- The steppers control is rudimentary
(only chanages what pins it uses depending on the active_extruder var,
but that's enough for switching extruder in the start.gcode in the
the profiles)
- Tested only w/ RAMPS 1.4
13 years ago
Bernhard Kubicek
40e8081623
changed end of line to windows, which seems to be the majority of developers main platform.
13 years ago
Bernhard Kubicek
00674af3a8
merge from the branch bkubicek/Marlin/zalmmerge
13 years ago
Erik van der Zalm
094afe7c10
Merged Marlin, Marlin non gen6 and Ultimaker changes
13 years ago
Erik van der Zalm
750f6c33e3
first commit
13 years ago