2480 Commits (c1fbef1722b2ade9a310f26264ac94e68a7c30ea)

Author SHA1 Message Date
Scott Lahteine d70a4a3847 Merge pull request #1823 from AnHardt/splashscreen
Disable splash-screen when done once
10 years ago
Scott Lahteine 56aea5f8e5 Merge pull request #1829 from Natealus/Development
Azteeg X3 Pro Pin fix ups
10 years ago
Scott Lahteine 6a860b99dc Merge pull request #1828 from Wackerbarth/Configurator
Update Configurator Files
10 years ago
AnHardt ac843fbf3b Fix lcd_status_message
Because we now can use utf8 with up to 3 bytes per symbol,
lcd_status_message[] must be 3*LCD_WIDTH wide.
Filling up the message, or cutting to length, are fixed to.

Fix for #1832 about at the end.
10 years ago
Scott Lahteine 6d084c017f Fix typo in FWRETRACT handler
Should be `retracting` and not `retract`
10 years ago
Edward Patel d27c82a450 Added check for Delta printers in Mesh, #error not yet supported. 10 years ago
Edward Patel 9a093b2e8f Added #error + mention not to enable ABL and Mesh at the same time 10 years ago
AnHardt 6ae714894e Now the simplycistic solution.
Just and only display splashscreen only once.
10 years ago
AnHardt d521693641 Revert "Draw content in display loop only when needed"
This reverts commit bf04a92cc0.
10 years ago
Natealus b6f2bff461 Azteeg X3 Pro Pin fix ups 10 years ago
Scott Lahteine d867c18535 Fix compile error with Z_DUAL_ENDSTOPS 10 years ago
Richard Wackerbarth 46474cf2f2 Incorporate @section headers from configurator 10 years ago
Richard Wackerbarth cf66cb8808 Bring configurator up-to-date 10 years ago
Richard Miles 1a5293c2ce Prevents MINTEMP / MAXTEMP when no heaters present
This commit checks whether or not HEATER_0 is in use, and if not, skips
the MIN / MAX temperature checks.
10 years ago
Edward Patel 5360158545 Merge branch 'Development-Marlin' into Development 10 years ago
AnHardt bf04a92cc0 Draw content in display loop only when needed
Example for splash screen.
10 years ago
AnHardt 9865318f1c Disable splash-screen when done once
Splash screen was shown with every display init.
That means every time the menus where entered.

Note the 2 in the initialisation.
The buffer is already written in two steps a 512 byte.
Without the 2 only the upper half is shown.
10 years ago
Scott Lahteine 53eb662908 Have the configurator read from MarlinFirmware repo 10 years ago
Edward Patel d24ea7c03f Added Comment in hope of github seeing these updates 10 years ago
Edward Patel 61de6ecd54 Added change to example Configuration.h's 10 years ago
Edward Patel 2f0081bbb5 Compile error fix! Fix for merge artifacts. 10 years ago
Edward Patel 0e6514e7bd Bug fix! Missed putting z value back in right slot after zigzag mod. 10 years ago
Edward Patel ea10601406 Merge branch 'Development-Marlin' into Development
Conflicts:
	Marlin/Configuration.h
	Marlin/Marlin_main.cpp
10 years ago
Scott Lahteine cb02bc6db4 Merge pull request #1817 from AnHardt/dogm_looptest
Execute DOGM display-loop less often
10 years ago
quillford b02a55e60f Fixed scara directions
Config said for a delta instead of for a scara
10 years ago
Scott Lahteine 6c5f07c5cb Merge pull request #1813 from thinkyhead/fixup_probing
Fix bad thermal runaway trigger
10 years ago
AnHardt 340d165a9c Reduce display updates for dogm displays
In 'if (encoderPastThreshold || LCD_CLICKED)' lcdDrawUpdate was not set.

'lcd_status_update_delay'-loop was not effective in  function
lcd_status_screen().
The loop prevented the update of the status screen but not the displays
update.
Shifted the loop into lcd_update().
10 years ago
AnHardt 418d22d7b3 Revert "Testloop cleanup"
This reverts commit 6361404b91.
10 years ago
AnHardt 6361404b91 Testloop cleanup
Shifted condition should still be in.
10 years ago
AnHardt 6d4b3f0d6a Move the condition before the loop
Result see: https://youtu.be/AEnBzdu9_tk
Dot is moving not so fast -> less executed loops.
10 years ago
AnHardt 4cb7dfc546 Move the 'alive dot' in every displayloop
Result see: https://www.youtube.com/watch?v=tdu7J0i-c4g
Loop is executed several times per display update.
10 years ago
Scott Lahteine b0f198c153 heater_index above its use 10 years ago
Scott Lahteine 60f8e0386f More thermal runaway states 10 years ago
Scott Lahteine f9dbd73652 Fix tr_target_temperature type - float! 10 years ago
Scott Lahteine c83faa9c5e Merge pull request #1811 from thinkyhead/fixup_probing
Compare indices instead of floats for probe actions
10 years ago
Scott Lahteine 61f8394361 Compare indices instead of floats for probe actions 10 years ago
Scott Lahteine a98183b463 Merge pull request #1809 from Wackerbarth/LanguageCleanup
Deferring default definition made #undef unnecessary
10 years ago
Scott Lahteine 41ded7e996 Merge pull request #1805 from thinkyhead/fixup_probing
Optimize coordinate copying, fix EXTRUDER_RUNOUT_PREVENT
10 years ago
Richard Wackerbarth 4119738e69 Deferring default definition made #undef unnecessary 10 years ago
Scott Lahteine 6f06d33be5 Fix missing refresh_cmd_timeout function 10 years ago
Scott Lahteine 2d099a2c70 Fix missing backslash in macro 10 years ago
Scott Lahteine 0f9b29e6c5 Merge pull request #1803 from Natealus/Development
Z_PROBE_ENDSTOP Pin for Azteeg X3 Pro
10 years ago
Scott Lahteine 0935084141 Fix manage_inactivity
- Document `manage_inactivity` function
- Allow `EXTRUDER_RUNOUT_PREVENT` to work with all extruders
- Use faster `memcpy` for copying coordinates
10 years ago
Scott Lahteine c065da52ec Spacing and spelling 10 years ago
Scott Lahteine a3e129e091 Merge pull request #1801 from thinkyhead/fixup_probing
Minor optimizations
10 years ago
Natealus ab11f90da0 Z_PROBE_ENDSTOP Pin for Azteeg X3 Pro
Just a simple #ifdef Z_PROBE_ENDSTOP to define the pin for it. Also has
a couple commented lines for switching Z_MIN_PIN if needed.
10 years ago
Scott Lahteine 8680b515b0 Fix missing tmp_extruder -> target_extruder 10 years ago
Natealus a6ba40ae48 Compiling error temperature.cpp with multiple extruders defined
It wouldn't compile because of this line in temperature.cpp it turns out
it was just a stray ( that didn't line up with the previous lines so I
just made it in line with the rest and it compiled fine.
10 years ago
Scott Lahteine fc3c76fc16 Fix #1800 10 years ago
Scott Lahteine c185912c19 Latest upstream commits, mostly 10 years ago
Scott Lahteine 1e5c18bb14 Add code_value_short and SERIAL_CHAR 10 years ago
Scott Lahteine e0d4368cb5 Minor code cleanup, move NUM_AXIS out of config 10 years ago
Scott Lahteine 4c7af484f8 Merge pull request #1787 from thinkyhead/fixup_tr
Fix: thermal_runaway_protection triggered by target temperature increase
10 years ago
Scott Lahteine c747becec1 Merge pull request #1796 from thinkyhead/pidbed_temp_eeprom
Add PIDTEMPBED to EEPROM
10 years ago
Scott Lahteine 84e4edaea7 Add M48 comment for #1794 10 years ago
Scott Lahteine 9ba55baa5b Track target temperature separately for each heater 10 years ago
Scott Lahteine 528e32a1d4 Fix timeout in thermal_runaway when temperature is set higher 10 years ago
Scott Lahteine b98ebd517e disable / enable_all_steppers functions 10 years ago
Scott Lahteine 713953d8c1 Upstream commits, allow no extruder in M105 10 years ago
Scott Lahteine 8f893eb8df Merge pull request #1798 from thinkyhead/fixup_probing
Fix probe height at G28 start
10 years ago
Scott Lahteine dde7e11f8e Merge branch 'Development' into fixup_tr
Latest upstream commits
10 years ago
Scott Lahteine abd7fc36b6 Fix probe height at G28 start 10 years ago
Scott Lahteine 610c8c5471 Merge pull request #1795 from thinkyhead/fixup_probing
Finish pin tests
10 years ago
Scott Lahteine e4934164e4 Merge pull request #1790 from Wurstnase/fix_home_z
fix feedrate for homing z
10 years ago
Scott Lahteine a469d796e1 Add cleanups needed for #1772 10 years ago
Scott Lahteine c0ca26cd50 Merge branch 'Development' into fixup_probing
Latest upstream commits
10 years ago
Scott Lahteine 5c1f08a35f Merge pull request #1772 from croadfeldt/Merge_cleanup
Z_PROBE_ENDSTOP
10 years ago
Scott Lahteine db7b0ea0cf Merge pull request #1569 from Wackerbarth/Development
Incorporating Build Numbers
10 years ago
Scott Lahteine 92119d0f7d Static delta[] for SCARA 10 years ago
Scott Lahteine 007a4bd421 Adjust spacing in view function 10 years ago
Scott Lahteine 424d5495e4 Add PIDTEMPBED to EEPROM 10 years ago
Scott Lahteine 6b919e14c1 Group all universal variables 10 years ago
Scott Lahteine 21cd2e4fae Merge branch 'Development' into fixup_probing
Latest upstream commits
10 years ago
Scott Lahteine 0e8182bbf2 Additional pin tests, cleanup 10 years ago
Wurstnase 45565b680d second wrong feedrate 10 years ago
Wurstnase 581b2aae04 fix feedrate for homing z
max_feedrate is in mm/s. line_to_destination needs a feedrate in mm/min because there is feedrate/60.
10 years ago
Edward Patel 48b1c3822f Merge branch 'Development-Marlin' into Development 10 years ago
Richard Wackerbarth ccdaea51ba Add KosselPro 10 years ago
Richard Wackerbarth f4599143eb Allow M115 to better reflect the build 10 years ago
Richard Wackerbarth 34c7d45879 Hook for Auto-generated Build Version
The automatic versioning system extracts a
build version number from the SCM system

That versioning information is written to the file
_Version.h, a file that is NOT preserved in the SCM.

If such a file will be present,
we include it here to utilize the parameters
that are defined therein.
10 years ago
Scott Lahteine c756b4cf07 Comment tweak 10 years ago
AnHardt 23cd54755f Fix typo in Marlin_main.cpp
related to current_position[Z_AXIS] and retract_zlift.

'+ =' -> '+='

Fix for #1786
10 years ago
Scott Lahteine e96df67630 Clarify thermal_runaway_protection
- Add comments documenting `thermal_runaway_protection`
- Add an enum for the thermal runaway states
- Add macros for temperature helper functions
- Fix a glitch with the z probe sled in homeaxis
10 years ago
Chris Roadfeldt 0afe6696f0 Merge remote-tracking branch 'MarlinFirmware/Development' into Merge_cleanup 10 years ago
Chris Roadfeldt 59994bd519 Not doing network admin work, pin not ping... :) 10 years ago
Chris Roadfeldt 916f59e35f Spaces not tabs in language.h.
Catch unlikely but possible error and head crash when using
Z_PROBE_REPEATABILITY_TEST
10 years ago
Scott Lahteine 66b3b53e76 Merge pull request #1762 from AnHardt/MiMa
Fix MIN&MAX temperatures again
10 years ago
Edward Patel 6b91b7b411 Mesh bed leveling: Added G29 S3 + finer steps in manual probing.
* Use "G29 S3 Xn Yn Zn.nn" to modify bad probed point manually
* Changed manual Z steps from 0.05 to 0.025 and made brought it to Configuration.h
10 years ago
Chris Roadfeldt 26dc80bf2d Typo fixed... 10 years ago
Chris Roadfeldt 2966ae2022 Fix Z_PROBE_PING not declared, allows code to compile if Z_PROBE_ENDSTOP
is not used.
10 years ago
Wurstnase 67d5e7973e old bump_divisor for cartesian/corexy-printer
some people are starting to ask why homing is so slow. this is the old standard hard-coded value.
10 years ago
Chris Roadfeldt bb41edc2ef Fixed extra #endif 10 years ago
Chris Roadfeldt a57862e29f Cleaning up code in prep for merge with upstream. 10 years ago
Chris Roadfeldt 745d9fe1a4 Merge remote-tracking branch 'MarlinFirmware/Development' into Merge_cleanup
Conflicts:
	Marlin/Marlin_main.cpp
10 years ago
AnHardt 488666832b Remove the previously introduced () 10 years ago
Scott Lahteine 443468df8d Merge pull request #1771 from AnHardt/iss1770
Added new - changed entries from Fix up LCD_PROGRESS_BAR
10 years ago
Scott Lahteine 9593f09b99 Merge pull request #1764 from thinkyhead/probe_leveling
Fix homing and leveling
10 years ago
Scott Lahteine 72c7de3570 Cleanup M48 10 years ago
Scott Lahteine 97a258b0b0 Clean up, document home_axis 10 years ago
AnHardt 831016b09f Added new - changed entries from Fix up LCD_PROGRESS_BAR
for when no LCD is defined.
Fix for #1770.
10 years ago
Chris Roadfeldt a508d835db Changed Z_PROBE_AND_ENDSTOP to Z_PROBE_ENDSTOP.
Updated documentation in Configuration.h.
Cleaned up and commented some code relating to Z_PROBE_ENDSTOP.
Separated Z_MIN_ENDSTOP and Z_PROBE_ENDSTOP completely.
10 years ago
Chris Roadfeldt fdb4ddbdea Merge remote-tracking branch 'MarlinFirmware/Development' into Development 10 years ago
atfield90 d273c90d53 Added support for Atmega 1281 chip 10 years ago
Scott Lahteine 1c7391717e Include sync_plan_position_delta for SCARA also 10 years ago
Scott Lahteine 8231fb166d Merge pull request #1758 from AnHardt/MENU_MULTIPLIER_ITEM
Fix: Audio feedback for MENU_MILTIPLIER_ITEM click
10 years ago
Scott Lahteine 0b57a2ab8b Merge pull request #1757 from bq/Translation-strings
Added new trasnslatable labels.
10 years ago
Scott Lahteine 18bb6be80e Fix homing and leveling
- Include the current Z when raising the axis after and between probing
- Add `sync_plan_position_delta` for parity with `sync_plan_position`
- Clean up and clarify `M48`, `dock_sled`, and others
10 years ago
AnHardt 3f2e863206 Improve conditions for HAS_TEMP
and use them in temperuture.h

Flattened the if structure - the preprocessor is doing the work - not the Arduino. Arduino.
10 years ago
AnHardt 85f8a26ba4 Fix MIN&MAX temperatures again
replaced GE0 with th matching GEX in the second row.
added some ()
10 years ago
AnHardt 19b11dfdd7 Fix can't enter MENU_MULTIPLIER_ITEM 10 years ago
Chris Roadfeldt c89b8368ee Merge remote-tracking branch 'MarlinFirmware/Development' into Development
Conflicts:
	Marlin/Marlin_main.cpp
10 years ago
Ivan Galvez Junquera d08782386b Added new trasnslatable labels.
* Added MSG_END_HOUR and MSG_END_MINUTE labels to all language files.
* Available translations:
  EN, FR, DE, ES, IT, PT, PT-BR.
10 years ago
Scott Lahteine 97a69d9b1c Correct XYZ after obtaining plan_bed_level_matrix
The current position needs to be updated by using the inverse
`plan_bed_level_matrix` on X, Y, and Z. All moves in the planner are
transformed by the `plan_bed_level_matrix` from this point forward.
10 years ago
Scott Lahteine 5f6962dd90 Merge pull request #1755 from thinkyhead/fixup_config
Raise when not retracting
10 years ago
Scott Lahteine ae89ccd2c7 Use Z_RAISE_BETWEEN_PROBINGS 10 years ago
Scott Lahteine 9a5a7a3f68 Raise when not retracting
Code to raise the probe before retraction is good, but the code should
always raise the probe, not just when retracting
10 years ago
Scott Lahteine 6ff1620fcb Merge pull request #1753 from thinkyhead/fix_extruder_offset
Fix EXTRUDER_OFFSET compiler error
10 years ago
Scott Lahteine cda4bd4ad9 Correct the comment about M206 10 years ago
Scott Lahteine 935592cf6a offsets off by default 10 years ago
Scott Lahteine 2a45922afe Restore extruder_offset, init more simply 10 years ago
Scott Lahteine 28792e5731 Fix typo in assignment 10 years ago
Scott Lahteine bb6174524f Fix EXTRUDER_OFFSET compiler error
- Addressing issue #1741
10 years ago
Scott Lahteine 571652c49b Fix LCD click
- Make the default LCD click sound more pleasant
- Fix warnings about bed temperature runaway
10 years ago
Chris Roadfeldt 45ece5afb1 Merge remote-tracking branch 'MarlinFirmware/Development' into Development 10 years ago
Chris Roadfeldt 17707e7479 Fixed Z_PROBE_PIN pullup bug.
Documented some additional areas that should be addressed if Z_PROBE is
fully separated from Z_MIN or Z_MAX.
Fixed a documentation error in sanity checks. Servos start at 0 not 1.
10 years ago
Scott Lahteine 21ab44cfa7 Merge pull request #1750 from thinkyhead/fixup_config
Bring all configs up to date
10 years ago
Scott Lahteine 50145266cd Merge pull request #1748 from thinkyhead/raise_before_homing
Apply Z_RAISE_BEFORE_HOMING before homing XY
10 years ago
Scott Lahteine a117b6bff6 Merge pull request #1747 from thinkyhead/progress_bar_tweak
Fix up LCD_PROGRESS_BAR
10 years ago
Scott Lahteine 3348b3bf0c Allow SD_FINISHED_RELEASECOMMAND to be undefined 10 years ago
Scott Lahteine 82794fa5f7 Add delta generic not renaming 10 years ago
Scott Lahteine ba2c7cb467 Update configs with all the latest 10 years ago
Chris Roadfeldt ec1d9c0b8f Use Z_PROBE_ENDSTOP_INVERTING when checking pin status. 10 years ago
Chris Roadfeldt 3175c70c79 Manually synching back up with MarlinFirmware/Development. 10 years ago
Chris Roadfeldt faac2af4af Merge remote-tracking branch 'origin/Development' into Development 10 years ago
Chris Roadfeldt 3be00cce6f Merge remote-tracking branch 'MarlinFirmware/Development' into Development
Conflicts:
	Marlin/Configuration.h
10 years ago
Chris Roadfeldt e08f8eed05 Revert 06f767d..cba5692
This rolls back to commit 06f767d608.
10 years ago
Scott Lahteine 5e82ed4f30 Restore ENDSTOPPULLUPS in Configuration.h 10 years ago
Chris Roadfeldt 992b07ca57 Don't disable Z_RAISE_BEFORE_HOMING when Z_PROBE_AND_ENDSTOP is enabled. 10 years ago
Chris Roadfeldt cba5692673 Merge remote-tracking branch 'MarlinFirmware/Development' into Development
Conflicts:
	Marlin/Marlin_main.cpp
	Marlin/stepper.cpp
10 years ago
Scott Lahteine 8500c80b33 Apply Z_RAISE_BEFORE_HOMING before homing XY 10 years ago
Scott Lahteine 92b54aa27e #define HAS_POWER_SWITCH 10 years ago
Scott Lahteine 5519882eea Fix up LCD_PROGRESS_BAR
- Some messages should not expire with `PROGRESS_MSG_EXPIRE`.
- Simplify conditional for progress bar with sanity checks.
- Rename `messageTick` to `expireStatusMillis` and make it the expire
time.
10 years ago
Scott Lahteine 6864280803 Use elif and parentheses in conditionals 10 years ago
Scott Lahteine 8c136a5ab5 Conditionals and comments for PS = 0 10 years ago
Scott Lahteine 2faed961ce Allow POWER_SUPPLY 0 for no power switch 10 years ago
Scott Lahteine baa6787393 Merge pull request #1740 from thinkyhead/fixup_homing
Apply leveling for DELTA
10 years ago
AnHardt 9ac7dc675e Make filament display on dogm_... same as hitachi...
Thanks @MagoKimbra.
10 years ago
AnHardt 50a732360a Replace extrudemultiply by extruder_multiply[active_extruder]
Fix for #1460.

Seems to work with only one extruder. Can't test this myself with more.
10 years ago
Scott Lahteine e63076504d Merge pull request #1733 from AnHardt/c20
Get back folder symbols on Hitachi displays
10 years ago
Scott Lahteine 41d258697a Pass the z for after probing to retract_z_probe
A `z_before` value is passed to probe_pt, but the `retract_z_probe`
function assumes that Z is 0, doesn’t add `current_position[Z_AXIS]` as
other cases do. This may be superfluous, so this is a test, and will be
reverted if it has no effect.
10 years ago
croadfeldt 06f767d608 Merge remote-tracking branch 'upstream/development' into development 10 years ago
Scott Lahteine b47fa8c064 Merge pull request #1735 from AnHardt/compilerCandy
Remove some further warnings
10 years ago
Scott Lahteine e96db1cd6c Make G29 shared function inline 10 years ago
Scott Lahteine d73b169de3 Apply leveling for DELTA,
- Fix `prepare_move` function not calling `adjust_delta`
- Add more shorthand for plan_buffer_line.
- Fix wrong `federate` usage, assuming they are all mm/m
- Minor `stepper.cpp` cleanup
10 years ago
Scott Lahteine 85b67e5223 Merge pull request #1738 from thinkyhead/fixup_homing
Fix G29 E and M48 n
10 years ago
Scott Lahteine ce44bee28b Small code reduction 10 years ago
Scott Lahteine 0213f7f016 Cleanup case for M666 10 years ago
Scott Lahteine 803425e12c Fix G29 E and M48 n
- Users prefer `G29 E` to work like `M48 E` so fixed that
- `M48 n` replaced with `M48 P` (or `p`). `n` legacy support
- Shorten some strings to save precious bytes
- Smaller code for 3-point probing
10 years ago
Scott Lahteine 1e9999711c Merge pull request #1736 from thinkyhead/fixup_homing
Fix G28 homing Y with X
10 years ago
Scott Lahteine d738b7acdd Merge pull request #1724 from Natealus/Development
Viki 2 Pins from Manual and Azteeg X3 Pro Endstop Reswap
10 years ago
Scott Lahteine e8ae51bfe3 Fix G28 homing Y with X
- Fixed a typo causing G28 to home incorrectly
- Added documentation to G28
- Added homeXYZ bools to neaten the code
- Added a note about home_offsets being questionable
10 years ago
AnHardt 7b2550a604 Times can't be negative.
cardreader.cpp needs temperature.h for autotempShutdown() when
AUTOTEMP is defined but warns about unused variables.
Unpublished variables by putting them in to temperature.cpp.
10 years ago
AnHardt 507efa771b Remove unused variable fan_rot
and satisfy the compiler about the implicit compare.
10 years ago
AnHardt 2b959a7752 Some additional {} to make the compiler happy. 10 years ago
AnHardt 0f1bd6e4a7 In ST7920_SWSPI_SND_8BIT(uint8_t val) parameter is unsigned
therefor in macro ST7920_WRITE_BYTE(a) cast a to uint8_t
to make the compiler happy.
10 years ago
AnHardt 81bab8739d Get back folder symbols on Hitachi displays
and make use of column 20.
10 years ago
Chris Roadfeldt a9802c95b3 Ensure Z_PROBE_PIN is defined if Z_PROBE_AND_ENDSTOP is. 10 years ago
Chris Roadfeldt 62834a1c43 Don't deploy probe on Z Axis homing if Z_PROBE_AND_ENDSTOP is enabled,
unless Z_SAFE_HOMING is.
10 years ago
Chris Roadfeldt 666fad3494 Typo fixed in sanity check. 10 years ago
Chris Roadfeldt 08a7aa16c5 Don't deploy Z Probe on Z homing if Z_PROBE_AND_ENDSTOP is defined. 10 years ago
Chris Roadfeldt 80285251cc More config cleanup work for Z_PROBE_AND_ENDSTOP. 10 years ago
Chris Roadfeldt fe4549cd83 Config file Z_PROBE_AND_ENDSTOP description clean up. 10 years ago
Chris Roadfeldt 82d2f11129 More additional sanity checks for Z_PROBE_AND_ENDSTOP 10 years ago
Chris Roadfeldt 05134f0807 Additional Sanity Checks for Z_PROBE_AND_ENDSTOP 10 years ago
Chris Roadfeldt c75a5e8c55 Fixed typo for Z_PROBE_AND_ENDSTOP support in pins_RAMPS.h.
Confirmed Sanity checks are working.....
10 years ago
Chris Roadfeldt a98ac4033b Added Z_PROBE_PIN to #define for Z_PROBE_AND_ENDSTOP support. 10 years ago
Chris Roadfeldt 6125124d6c Config file cleanup for Z_PROBE_AND_ENDSTOP support. 10 years ago
Chris Roadfeldt 324c14943b Bug fixes for Z_PROBE_AND_ENDSTOP.
Code cleanup for Z_PROBE_AND_ENDSTOP.
Added Z_PROBE_PIN to pins_RAMPS_13.h
10 years ago
Natealus ca5821aa57 Made #ifdef DELTA branch instead
Another fellow here gave me the idea to do it this way
10 years ago
Natealus 04fda6b3e9 Undesired behavior with endstops swapped
Made my swap commented out so its the option not the default.
10 years ago
Natealus ca1477d830 Revert "Undesired behavior with endstops swapped"
This reverts commit 15028e9b08.
10 years ago
Natealus 15028e9b08 Undesired behavior with endstops swapped
I made my changes to swap MIN and MAX endstops on the Azteeg X3 Pro the
option rather than the default to fix unexpected reversal.
10 years ago
Nate Stokes 18245c6cd2 Update pins_RAMBO.h
Updated for the changes that Thinkyhead made before I submitted mine.
10 years ago
Natealus 234a9d0b12 Viki 2 Pins from Manual
I added in the pins into the new board files for the Azteeg X3, X3 Pro,
Printrboard, and Rambo. I'm sure it can be added for others too but
these are the manual specified pins. Just like many things here though,
I can't test for the boards other than the Azteeg X3 Pro. Hopefully it
works smoothly for everyone who happens on this nifty display. :)
10 years ago
Scott Lahteine a22efc5f11 Merge pull request #1597 from Wurstnase/g29_auto_script
G29 auto script
10 years ago
Scott Lahteine 62a3da9618 Merge pull request #1723 from thinkyhead/tweak_g92
Tweak G92
10 years ago
Scott Lahteine afff968e88 ARRAY_BY_EXTRUDERS, shorthand to sync planner
- Add some documentation to planner and stepper headers
- Patch up RAMBO pins with undefs
- Add `sync_plan_position` inline to set current XYZE
- Swap indices in `extruder_offset` to fix initialization values
10 years ago
Scott Lahteine 2b0c25a091 Tweak G92 to call plan_set_position only once, yes? 10 years ago
Natealus 22bea37393 Azteeg X3 Pro Pin Revisions
I added the fan pins in here and left them at -1 in configuration_adv.h
and it works fine. Pinned for a 4 extruder from 1-4 and HE5 being the
controller fan, HE6 being the Extruder Auto Fan/Water pump in the Kraken
case, and HE7 being for part cooling fan. Added in descriptions for the
MIN MAX pin swap and for servo motor additions.
10 years ago
Scott Lahteine 93dc0d0518 Merge pull request #1718 from AnHardt/blink
Move variable blink from ultralcd.h to dogm_lcd_implementation.h
10 years ago
Scott Lahteine edb67ea165 Patch generic delta config
- Addressing issue mentioned at #1699
10 years ago
AnHardt c481c3b180 Move variable blink from ultralcd.h to dogm_lcd_implementation.h
to avoid warnings about unused blink.

Concentrate definitions of variables in dogm_lcd_implementation.h to one place.

Make only local used variable currentfont static.
10 years ago
Chris Roadfeldt 059052889f Further Sanity Checks for Z_PROBE_AND_ENDSTOP. 10 years ago
Chris Roadfeldt 8b81f20c61 Filling in more places where Z_PROBE_PIN and Z_PROBE_AND_ENDSTOP need to
be.
Added Sanity Check for it.
Added hook so it's enabled.
10 years ago
Chris Roadfeldt fd823449ad Added serial message for Z Probe trigger. 10 years ago
Chris Roadfeldt 92eb8109ab Fix declaration of old_z_probe_endstop. 10 years ago
Chris Roadfeldt 44b88b41a2 Added credit for code. 10 years ago
Chris Roadfeldt 2979b40a7a Fixed typo in Z Probe and Endstop section. 10 years ago
Chris Roadfeldt 9f3ff14008 Enabled separate Z Probe and Z Axis endstop use at same time.
Typo fixes in comments in existing code.
10 years ago
Scott Lahteine b14be7235e Merge pull request #1585 from galexander1/strtod_e_fix
Fix `code_value` (so `G1X1E2` isn't evaluated as `G1 X100 E2`)
10 years ago