CONSULitAS
cbae44df64
K8200: Example configuration back in sync
...
Configuration.h: back in sync, new features configured
Configuration_adv.h: back in sync, new features configured
README.md: text updated
8 years ago
esenapaj
5db3738fe7
Re-follow the PR #4634 (Set language display charset in language.h)
8 years ago
Scott Lahteine
6eb6f12c64
Patch up some language formatting
8 years ago
Bo Herrmannsen
8cffa60cc5
Update to Danish language 10/11-2016
8 years ago
Scott Lahteine
98600e1433
Minor stepper cleanup
8 years ago
Florian Heilmann
d08867986e
Add autotemp capabilities to M104
...
This allows M104 to pass the F and B parameters to enable autotemp as well
8 years ago
Sebastianv650
c11b2bb777
Bugfix LIN_ADV
...
Advance has nothing todo with Z_AXIS, strange copy&paste error?
8 years ago
Scott Lahteine
ee0765e872
Merge pull request #5233 from esenapaj/Update-Japanese-translation
...
Update Japanese translation
8 years ago
Scott Lahteine
2330619da0
Merge pull request #5191 from petrzjunior/const
...
Replace const bool with #define for consistency
8 years ago
esenapaj
b278b7a395
Update Japanese translation
...
Only adjust spacing
8 years ago
Petr Zahradník junior
d7ce5d271b
Replace const bool with #define for consistency
8 years ago
Scott Lahteine
d63230d73e
Merge pull request #5192 from Kaibob2/patch-7
...
Printer Stats / Completed prints line doesn't fit in display (when german)
8 years ago
Scott Lahteine
548b45026d
Merge pull request #5214 from Sebastianv650/RCBugFix_planner_opt
...
Save some cycle inside the planner
8 years ago
Scott Lahteine
5d23e52d75
Merge pull request #5228 from thinkyhead/rc_keep_last_mix
...
Fix DIRECT_MIXING_IN_G1 to preserve the previous mix
8 years ago
Scott Lahteine
db47aa983d
Merge pull request #5226 from mtowara/RCBugFix
...
bump -std in Makefile to c++11
8 years ago
Scott Lahteine
99b0c1fe56
Fix DIRECT_MIXING_IN_G1 to preserve the previous mix
8 years ago
Markus Towara
23a675f621
reduce binary size of .hex
...
still a few bytes bigger than with arduino but nothing major
8 years ago
Markus Towara
5b6e2cecf5
bump c/c++ standard to gnu11
...
needed for constexpr
8 years ago
Scott Lahteine
410657b050
Fix G30 with limits, print correct probe XY
8 years ago
AnHardt
f3eee02596
Introduce endstop interrupts
...
If ENDSTOP_INTERRUPTS_FEATURE is enabled this tries to set up interrupt routines
for all used endstop pins. If this worked without errors, `endstops.update()` is called
only if one of the endstops changed its state.
The new interrupt routines do not really check the endstops and react upon them. All what they
do, is to set a flag if it makes sense to call the endstop test we are used to.
This can be used on:
* ARM (DUE) based boards - all pins can raise interrupts,
* RAMPS - all 6 endstop pins plus some other on EXT-2 can raise interrupts,
* RAMPS based boards - as long the designers did not change the pins for the endstops or at least left enough,
* all boards, if there are enough pins that can raise interrupts, and you are willing/able to swap with pins dedicated to other purpose.
8 years ago
Sebastianv650
e3ffb58fbd
Save some cycle inside the planner
...
planner.h:
fan speed is used to set integer variables, so no need for long.
Basicaly a byte should be enough for all the fan things, as it's 0-255?
planner.cpp:
Save some float multiplications.
We could squeeze out even more by defining feedrate_percentage,
saved_feedrate_percentage and flow_percentage as float instead of int.
Everytime they are used in the time-critical planner, they are casted to
float and multiplied by 0.01. Not done jet, as they are used in LCD menu
functions I don't know well enough.
8 years ago
Scott Lahteine
665b7f3893
Merge pull request #5212 from thinkyhead/rc_mixing_faster
...
Store mix factors as reciprocals and multiply
8 years ago
Scott Lahteine
60cc9342a4
Merge pull request #5188 from thinkyhead/rc_extended_host_support
...
Extended host support: M155 Auto temp report, M115 capabilities
8 years ago
Scott Lahteine
f663220e87
Store Mix factors as reciprocals and multiply
8 years ago
Scott Lahteine
ea3c08d249
Merge pull request #5186 from esenapaj/Follow-up-the-PR-#5167-etc
...
Follow up the PR #5167 (Add Turkish Language) again, etc
8 years ago
Scott Lahteine
c488378532
Merge pull request #5205 from Sebastianv650/RCBugFix_stepperpatch
...
Remove useless line from stepper ISR
8 years ago
Michael Neumann
8bdf303da0
Update pins_MEGATRONICS_3.h
8 years ago
Michael Neumann
3890366c83
Update pins.h
8 years ago
Michael Neumann
c0d45ca7f2
Update boards.h
8 years ago
Sebastianv650
cdc18f8c22
Remove useless line from stepper ISR
...
The flag is already set inside planner.get_current_block(). Doing it
twice isn't making it better..
8 years ago
Kai
8e8b4398f3
Printer Stats / Completed prints line doesn't fit in display (when german)
8 years ago
Scott Lahteine
b31a07e261
Stateful M355 with separate P parameter
8 years ago
Scott Lahteine
3c9a838651
Extended capabilities report in M115
8 years ago
Scott Lahteine
68b866b5dd
Add M155 - Auto-report temperature with interval
8 years ago
Scott Lahteine
68b46fb2c9
Allow send to i2c address 0 (broadcast)
8 years ago
Scott Lahteine
75bfde9945
M155=>M260, M156=>M261
8 years ago
esenapaj
2ae72b0491
Follow up the PR #5167 (Add Turkish Language) again, etc
...
・Update forgotten K8400\Dual-head\Configuration.h
・Adjust spacing
8 years ago
Scott Lahteine
06f2282f82
Merge pull request #5176 from thinkyhead/rc_filchange_feedback
...
Give instant feedback for filament change
8 years ago
Scott Lahteine
dcfd7c69e8
Merge pull request #5163 from nzinov/RCBugFix
...
Improve G30 probing command - add optional arguments
8 years ago
Scott Lahteine
e765eebfb0
Patch spacing in bilinear grid report
8 years ago
Scott Lahteine
7780052fb3
Give instant feedback for filament change
8 years ago
esenapaj
24e3f7abe7
Update Turkish translation
...
・Add new translation
8 years ago
esenapaj
be48792e9c
Follow up the PR #5167 (Add Turkish Language), etc
...
・Remove all the #ifndef
・Follow the PR #4603 (Strip never-translated strings from language
files)
・Follow the PR #4634 (Set language display charset in language.h)
・Follow the PR #4936 (Put max_jerk vars in array, clean up jerk code)
・Adjust spacing
8 years ago
Scott Lahteine
1864b282c5
Implement reversed CORE options
8 years ago
Scott Lahteine
e3c8318504
Add reversed CORE options
8 years ago
Rigid3D
2327764980
Add Turkish Language
8 years ago
Nikolay Zinov
dea00bbcf1
improve G30 probing
...
Add optional parameters
X, Y for probe point
S sets stowing on and off
8 years ago
Scott Lahteine
00662b8635
Minor babystep cleanup patches
8 years ago
Scott Lahteine
cad792e702
Reduce code for invariant lcd_detected
8 years ago
Scott Lahteine
b23d255491
Move macros above Stepper::babystep
8 years ago
Scott Lahteine
cc57d46158
Fix set_position for CoreYZ
8 years ago
Scott Lahteine
0269347682
Merge pull request #5141 from thinkyhead/rc_old_slowdown_what
...
OLD_SLOWDOWN does nothing, so remove it
8 years ago
Scott Lahteine
e92e2b2446
Merge pull request #5144 from Sebastianv650/RCBugFix_LIN_ADV_wipe
...
Account for wipe moves
8 years ago
Scott Lahteine
176aeafc19
Don't define bilinear_line_to_destination on kinematic setups
8 years ago
Sebastianv650
d448500643
Account for moves with negative E movements
...
Added a rule so that LIN_ADVANCE isn't used for moves with negative E movements (de_float will be negative in this cases).
I also added a more detailed comment to make it more clear what the if statement does.
8 years ago
Scott Lahteine
236853df22
Corrections to bilinear_line_to_destination
...
- Allow more than 9x9 probe points
- Account for the probe starting position
8 years ago
Scott Lahteine
0115e495fe
Fix up Dual X switch blocks
8 years ago
Scott Lahteine
2495ab7af2
Make dual_x_carriage_mode an enumeration
8 years ago
Scott Lahteine
d6c36f5bb9
Fix Z raise with DXC_AUTO_PARK_MODE
8 years ago
Scott Lahteine
0c79553fc5
Cast int to AxisEnum for some accessors
8 years ago
Scott Lahteine
adbf1f7dca
Add M355 to the GCodes list.
8 years ago
Scott Lahteine
63efc10599
Merge pull request #5134 from thinkyhead/rc_bilinear_split_lines
...
Split cartesian moves on grid boundaries with bilinear ABL
8 years ago
Scott Lahteine
12167bc8f3
OLD_SLOWDOWN does nothing, so remove it
8 years ago
esenapaj
c8c1a28f6f
Follow-up the PR #5089 (Centralize click-handling in the LCD loop)
...
bool feedback is no longer used
8 years ago
esenapaj
c3a105186d
Follow-up the PR #5133 (M355 Case light)
...
・Add CASE_LIGHT_PIN into pinsDebug.h
8 years ago
Scott Lahteine
ee5b8d6dc8
Split moves on grid boundaries with bilinear ABL on cartesian
8 years ago
Scott Lahteine
66744a6076
Merge pull request #5133 from thinkyhead/rc_M355_case_light
...
M355 Case light
8 years ago
Scott Lahteine
955d14acb0
Patch photo pin code style
8 years ago
Stanley
ab3f966f5f
Case light G-code M355
...
implemented G-Code M355 into Marlin
8 years ago
Scott Lahteine
8b44413498
Merge pull request #5124 from Sebastianv650/RCBugFix_LIN_ADV-Patch
...
BugFix for incorrect E-speed calculation
8 years ago
Scott Lahteine
f418e82b15
Remove redundant definition of EN_C
8 years ago
Sebastianv650
f9bea7968f
BugFix for incorrect E-speed calculation
...
The extrusion speed was wrong due to a not high enough precision of
esteps to XY steps, therefore now the target float values are used to
calculate the ratio between XY movement and extrusion speed.
The e_speed_multiplier8 was replaced by an absolute multiplier called
abs_adv_steps_multiplier8, therefore one multiplication and bitshift can
be saved inside the stepper ISR. Due to this, also extruder_advance_k is
better suited inside the planner and not the stepper files any more.
8 years ago
Bob-the-Kuhn
c20b4098be
2 bug fixes & some minor changes
...
see detailed description in PR #5118
8 years ago
Scott Lahteine
fa6bf12697
Merge pull request #5118 from thinkyhead/rc_expanded_M43
...
Enhancements to M43 pins debugging
8 years ago
Scott Lahteine
3a107e280d
Developer note in pins_MIGHTYBOARD_REVE.h
8 years ago
Scott Lahteine
85e307dcd8
No FAN0_PIN
8 years ago
Scott Lahteine
ff3a8ca0d1
Use NUM_DIGITAL_PINS instead of custom DIO_COUNT
8 years ago
Scott Lahteine
04a1fac029
Some cleanup to M43
8 years ago
Scott Lahteine
24f6612551
Reduce and optimize endstop_monitor code
8 years ago
Scott Lahteine
b4444e91ae
Reduce code and build size of PWM_details
8 years ago
Scott Lahteine
dbe414ef03
Squash redundant code in PWM_status
8 years ago
Scott Lahteine
af26d22741
Clean up some spacing and semantics
8 years ago
Bob-the-Kuhn
81397d7a9a
EXTRUDER_x_AUTO_FAN name change to Ex_AUTO_FAN
...
I stumbled across a name change that'll be used a lot so I'm updateing
the name list.
8 years ago
Bob-the-Kuhn
c7f1f0dae6
Add endstop monitor & make pins report pretty
8 years ago
Scott Lahteine
d567b426d5
Merge pull request #4894 from thinkyhead/rc_mightyboard_rev_e
...
Mightyboard Revision E preliminary support
8 years ago
Scott Lahteine
43df9ace4e
Merge pull request #5110 from thinkyhead/rc_z2_min_allowed
...
Support Z2 min in M119 report
8 years ago
Scott Lahteine
23f05f8be7
Use bit-length types in block_t
8 years ago
Scott Lahteine
8dc7807d85
Add support for CoreYZ to planner.buffer_line
8 years ago
Scott Lahteine
1cf878fdb1
Calculate dm and e-steps earlier in planner
8 years ago
Scott Lahteine
75dbb71dd7
Replace block.busy with a block.flag bit
8 years ago
Scott Lahteine
c7f22f688f
buffer_line can calculate while it's waiting
8 years ago
Scott Lahteine
f3720f4e81
const arguments to test_dual_z_endstops
8 years ago
Scott Lahteine
8cebd2a7db
Arrange Z2 min before Z2 max
8 years ago
Scott Lahteine
accabf088a
Add support for Z2 min endstop to M119
8 years ago
Scott Lahteine
396434a445
Fix compiler warning in M145
8 years ago
Scott Lahteine
8e787304c9
const float ref args in planner.h
8 years ago
Scott Lahteine
07bfc45df8
Adjust spacing in gcode_M149
8 years ago
Scott Lahteine
1a2310c494
Make LCD preheat vars an array to reduce code size
8 years ago
Scott Lahteine
1226ae1912
Some cleanup in ultralcd.h
8 years ago
Scott Lahteine
50ee749082
Centralize click-handling in the LCD loop
8 years ago
Scott Lahteine
47ad97c35e
Merge pull request #5109 from thinkyhead/rc_eeprom_M218_tool_offset
...
Save hotend_offset array (M218) in EEPROM
8 years ago
Scott Lahteine
bff6bbdb12
Indentation in configuration_store.cpp
8 years ago
Scott Lahteine
97115d56f9
Print error for M500 with disabled EEPROM
8 years ago
Scott Lahteine
67ab54185b
Save hotend_offset array (M218) in EEPROM
8 years ago
MagoKimbra
dfcdbb437b
Fix Command M420
8 years ago
Scott Lahteine
c34dbfb248
Merge pull request #5072 from thinkyhead/rc_preset_auto_fans
...
Add predefined AUTO_FAN_PINs to pins files
8 years ago
Scott Lahteine
9a23f73765
Don't trigger endstops that are actually Z2 or probe
8 years ago
Scott Lahteine
c07cc9e3f1
Revert changes made to z dual endstop test
...
#3631 broke z dual endstops. Solved by @Nocturnal42 in https://github.com/MarlinFirmware/Marlin/issues/5078#issuecomment-256572248
8 years ago
Scott Lahteine
c4c53856a4
Merge pull request #5094 from esenapaj/Fix-for-the-PR-#5088
...
Fix for the PR #5088 (Handle M108 in M1 also with ULTIPANEL)
8 years ago
Scott Lahteine
2e3110539b
Merge pull request #5095 from thinkyhead/rc_fix_bilinear_math
...
Fix bilinear grid constraints
8 years ago
esenapaj
d5a5042d23
Fix for the PR #5088 (Handle M108 in M1 also with ULTIPANEL)
8 years ago
Scott Lahteine
9cbedab91b
Use DPM where possible
8 years ago
Scott Lahteine
ad38d91692
Sanity check that auto fan pins can do PWM
8 years ago
Scott Lahteine
95275eb9b3
Predefine auto fan pins in some pins files
8 years ago
Scott Lahteine
3f94b15cef
Fix bilinear grid constraints
...
Followup to #5090
8 years ago
Scott Lahteine
d439fb95f7
Sanity check for the renamed options
8 years ago
Scott Lahteine
b6aa894893
Rename auto fan pins and add auto fan flags
8 years ago
Scott Lahteine
ada935de87
Allow TEMP_STAT_LEDS with only one LED defined
8 years ago
Scott Lahteine
4b056d8184
Fix warning in ultralcd.cpp
8 years ago
Scott Lahteine
9dfd029911
Fix bug in fastio.h _GET_TIMER
8 years ago
esenapaj
8b1d90e281
Follow-up the PR #5087 (Fixed SERVO pins on Azteeg X3), etc
...
・Add header
・Adjust spacing
8 years ago
Scott Lahteine
bfd3b3c604
Merge pull request #5087 from Fulg/azteeg-x3-pins
...
Fixed SERVO pins on Azteeg X3
8 years ago
Scott Lahteine
208d720614
Merge pull request #5082 from Fulg/RCBugFix
...
Only issue MAXTEMP when heating
8 years ago
Scott Lahteine
f0d673561f
Fix for bilinear grid outside bounds
8 years ago
Scott Lahteine
24bcea6c02
Merge pull request #5088 from thinkyhead/rc_break_m1_fix
...
Handle M108 in M1 also with ULTIPANEL
8 years ago
Scott Lahteine
1ba1ec0db9
Handle M108 in M1 also with ULTIPANEL
8 years ago
Scott Lahteine
7ad33422e3
Clear dir_t size, not pointer size
8 years ago
Benoit Miller
1c716034ec
Fixed SERVO pins on Azteeg X3
8 years ago
Benoit Miller
2aa12d78dc
Only issue MAXTEMP when heating
8 years ago
Scott Lahteine
3fcf915808
Fix uninitialized var in reset_acceleration_rates
8 years ago
Scott Lahteine
14f824c3de
Merge pull request #5071 from esenapaj/Extend-measuring-range-of-thermocouple
...
Extend measuring range of thermocouple for MAX31855
8 years ago
Scott Lahteine
1097a50694
Merge pull request #5070 from gcormier/rcbugfix
...
Fix #4995 - M48/G29 on CoreXY maybe others?
8 years ago
Sebastianv650
c397b9d60a
Planner acceleration bugfix and speedup v2
...
.) Use already existing inverse_millimeters instead of /
block->millimeters.
.) Prevent overflow during acceleration calculation by checking if float
is necessary. Idea modified from Sailfish.
.) Save two uint32_t or even float multiplications by checking if
step[AXIS] has steps and if max acceleration is lower than accel. If
not, there is no need to check this axis.
8 years ago
esenapaj
70e287ca8c
Extend measuring range of thermocouple for MAX31855
8 years ago
Greg Cormier
f0aed9dac7
Fix #4995 - M48/G29 on CoreXY maybe others?
8 years ago
esenapaj
e50992694f
Fix for the PR #5066 (Updated french translation)
...
MSG_INFO_PRINT_TIME is still being used
8 years ago
Scott Lahteine
483082387c
Merge pull request #5022 from esenapaj/Fix-for-the-PR-#4553
...
Fix for the PR #4553 (Save bytes for custom chars (Hitachi LCD))
8 years ago
Scott Lahteine
8b967a9ff0
Merge pull request #5058 from thinkyhead/rc_reverse_arrow_buttons
...
Apply encoder reverse options to keypad arrows
8 years ago
esenapaj
523c7eaa6c
Fix for the PR #4553 (Save bytes for custom chars (Hitachi LCD))
8 years ago
Scott Lahteine
ca48a49fdb
Merge pull request #5065 from petrzjunior/transl
...
[LANGUAGE] Update Czech (BLTOUCH and DAC strings)
8 years ago
Scott Lahteine
f0744fc815
Merge pull request #5066 from thinkyhead/rc_french_update
...
Updated french translation
8 years ago
Gege2B
88b7f6eb46
Updated french translation
8 years ago
Scott Lahteine
3544c3632f
Merge pull request #5062 from thinkyhead/rc_warnings_fix
...
Warnings fixed redux
8 years ago
Petr Zahradník junior
8323d78ed7
Translated BLTOUCH and DAC strings
8 years ago
Scott Lahteine
e151f952a3
Apply encoder reverse options to keypad arrows
8 years ago
Scott Lahteine
cfb47929ca
Merge pull request #5060 from thinkyhead/rc_fix_ugly_code
...
Reduce, clean up MINTEMP / MAXTEMP test code
8 years ago
Josef Pavlik
dca50737f5
fixed warning: ISO C++ forbids compound-literals
8 years ago
Josef Pavlik
0bd66807b2
fixed warning: extra ;
8 years ago
Josef Pavlik
d35dc407a8
fixed warning: ISO C99 requires rest arguments to be used
8 years ago
Josef Pavlik
c2b51af3ba
fixed warning: ISO C does not permit named variadic macros
8 years ago