Commit Graph

12633 Commits (a80b1e6d5f07b1944fe7985176afbab10c436a7c)
 

Author SHA1 Message Date
Scott Lahteine 3bc179a16f Compress/update comments ubl_motion
…to fit more code on the screen and correct outdated commentary contrasting ABL.
Luc Van Daele 646aa20b43 Overhaul of G33 Delta Calibration ()
Luc Van Daele ac2e0afb62 Low Point for delta calibration ()
Eduardo José Tagle 57a899a412 [2.0.x] 6th-order jerk-controlled motion planning in real-time for AVR ()
Scott Lahteine 5676b187b4 Move etc/udev to buildroot/etc
Followup to . This is the appropriate place for any system etc folder additions.
Bob-the-Kuhn 44a03ecfc9 Add Linux compatibility for Arduino boards ()
Bob-the-Kuhn 85014cd132 [2.0.x] LPC1768 - automatic selection of upload disk ()
Scott Lahteine 8669dba5e6
Merge pull request from noingwhat/2.0.x-Filament-Change-Acceleration
[2.0.x] Filament load/unload add acceleration for Bowden
Scott Lahteine 472ab0cc24 Tweak RAMPS SDSS pins
LichtiMC b94c8defee Provide additional information about SMART-RAMPS board ()
Scott Lahteine 6f8e228880 Add RESET_PIN to pins_RAMPS_SMART.h
Sean 2d9b0a66fe Add Filament Change accelerations
Scott Lahteine 71d3523254 Add Filament Change accelerations to example configs
Scott Lahteine dcb1f1f452
Merge pull request from thinkyhead/bf2_z_probe_low_point
[2.0.x] Z_PROBE_LOW_POINT to prevent probe/bed damage
Scott Lahteine 8b8ad14178 Add Z_PROBE_LOW_POINT to prevent damage
Scott Lahteine 82dafbba33 Add Z_PROBE_LOW_POINT to example configs
Roxy-3D a731a723e8 Better i3-2020 Z_PROBE_OFFSET_FROM_EXTRUDER
Roxy-3D 26cc12eaa4 Resolve corruption of Max7219 Debug LED Matrix
Scott Lahteine 72c15a5cc9 Add --no-track to mfnew git script
Scott Lahteine dca69efc11 Update Bed PID comments
Scott Lahteine 56486c5c0e Apply const to manage_inactivity
Scott Lahteine a6485456df Fix LIGHTWEIGHT_UI with UBL
See https://github.com/MarlinFirmware/Marlin/issues/10317#issuecomment-379100702
Scott Lahteine e02fc4f1d6 Better RESTORE_LEVELING_AFTER_G28 sanity-check
As suggested by @GMagician
Scott Lahteine 44a697ab04 Set STM32F1 TEMP_TIMER_FREQUENCY to 1K
Responding to https://github.com/MarlinFirmware/Marlin/pull/8833#issuecomment-379426803
Scott Lahteine cec6e19099 Add RepRapPro Huxley configuration
Based on  by @indazoo
Scott Lahteine 9ff4e9e1e6 Patch _IS_HW_SPI so defined() works
Scott Lahteine cea398849e Tweak to gcode_line_error/return
Scott Lahteine 4382f2124d
Merge pull request from ejtagle/bugfix-2.0.x
[2.0.x] 6th-order jerk-controlled motion planning in real-time
etagle a29adde5c0 Implement BEZIER_JERK_CONTROL
Enable 6th-order jerk-controlled motion planning in real-time.
Only for 32bit MCUs. (AVR simply does not have enough processing power for this!)
Scott Lahteine 5932df7ea1 Add BEZIER_JERK_CONTROL to example configs
Scott Lahteine 93524c1994
Merge pull request from Lenbok/2.0.x-monitor_chamber_temperature_and_auto_fan
[2.0.x] Monitor chamber temperature, with auto fan control.
Lenbok 0e8242180d Chamber temperature monitoring and auto fan control.
This is an initial cut for feedback, updated for 2.0.x.

Chamber temperature is currently reported along with hot end and bed
temperatures to serial. The format is just like that used for hot end
and bed temperatures, but using 'C' prefix. As there is no heater,
target is always 0. Is this appropriate, is there a better way to report
chamber temperatures?

Chamber temperatures are not reported on the LCD in any way.

When auto chamber fan is enabled, it currently just uses the same
temperature threshold as the other auto controlled fans.

As the chamber temperature is not connected to any heater, it doesn't
undergo mintemp/maxtemp monitoring. This would need to change in the
future if chamber heating became a feature.
Scott Lahteine 5b3bda1c16 Add Chamber Temp options to example configs
Bob-the-Kuhn acda4ecb20 Fix DUE Trinamic SW/HW SPI sanity check ()
Bob-the-Kuhn ab715c70d1 TMC SPI sanity-check and pins debugging ()
Scott Lahteine 4dc7e64789 Update Slovak language
Based on  by @rmoravcik
Scott Lahteine 0dccf9ea6a
Merge pull request from marcio-ao/pr-einsy-retro-tmc2130
[2.0.x] Fix TMC2130 DIAG1 active high, Einsy Retro
Marcio Teixeira 2efc072fdb Clear progress bar on completion ()
Fix 
GMagician 6ce060cfe0 [2.0.x] Update language_it.h ()
Updated to 
Marcio Teixeira 9356cf648f Added support for Einsy Retro
http://reprap.org/wiki/EinsyRetro
Marcio Teixeira 75037493fa Default active low for TMC2130 DIAG1 ()
- Added sanity check to inform users to set the endstop to inverting
  when using SENSORLESS_HOMING
Scott Lahteine e8e60263c8 Scale feedrate (mm/s to deg/s) for SCARA
Scott Lahteine 051303ad42 Russian language updates
From  by @anton-piliugin
Scott Lahteine 386bc71d57
Merge pull request from noingwhat/2.0.x-Continuous-Purge
[2.0.x] Continuous Purge
Sean 2fa0a73c2c Implement filament change continuous purge
Scott Lahteine d133ad61f3 Add continuous purge to example configs
Scott Lahteine 4b25543633 Backtrace formatting cleanup
Bob-the-Kuhn 902c885782 Switch to TMC2130 compatible hardware SPI & misc ()
Scott Lahteine 1c36606886 Fix MSG_HEATING_FAILED_LCD_BED macro evaluation
Scott Lahteine fe91514395
MBL should add z_offset regardless of fade ()