Scott Lahteine
69b0490b77
Show minimal preheat options in menus (PR#2471)
10 years ago
Scott Lahteine
eacfe132aa
Change the name of servos[] and servo_t
10 years ago
Scott Lahteine
3b23ccd366
Patch servos code for move
...
- Have `Servo::attach` explicitly return -1 if it fails
- Check for -1 in `Servo::move` because `servoIndex` might be 0
- Make `attach` / `detach` calls conditional on `SERVO_LEVELING`
- Move `SERVO_LEVELING` define to `Conditionals.h`
10 years ago
Richard Wackerbarth
54ddc1d417
Simplify DRY RUN (PR#2358)
...
Elsewhere DRYRUN turns off the heating elements
and ignores constraints on them.
Here, whenever motion is entered into the planner,
if DRY RUN is set, we instantly act as if the E_AXIS
is in the desired final position.
10 years ago
Scott Lahteine
944090c19c
Optimize lsDive logic
10 years ago
Scott Lahteine
417706e578
Include space for the terminating nul in lsDive
10 years ago
Scott Lahteine
f3c1a6b19c
Reduce lsDive stack usage to the minimum
10 years ago
Patrick Bogen
fba4e6241b
Specify print format for reporting invalid tmp_extruder (PR#2465)
10 years ago
AnHardt
d15d869267
Rename axis_is_at_home() to set_axis_is_at_home() (PR#2464)
...
to make clear - it's not a question but an order.
10 years ago
Scott Lahteine
f209b755a5
Move the Z probe as far as needed to trigger the switch (PR#2461)
10 years ago
Scott Lahteine
0f1df62389
Fixup comments in code_seen
10 years ago
Scott Lahteine
2945eb6650
Call code_seen only once per parameter
10 years ago
Scott Lahteine
b742af2e2a
Move Y_STOP_PIN for Printrboard with SD (PR#2420)
10 years ago
Scott Lahteine
baa9199973
Define extern delta only for delta
10 years ago
Scott Lahteine
77e80ef367
Require extruders for thermal code
10 years ago
Scott Lahteine
3bde4f4855
Require temp sensor for bed thermal protection
10 years ago
Scott Lahteine
82a3ed2f9a
Cleanup and dev notes in Marlin.h
10 years ago
Scott Lahteine
db23b9b184
Minor tweak to M204 code (PR#2457)
10 years ago
Scott Lahteine
81d42406b7
Move braces in homeaxis to prevent a hanging else (PR#2451)
10 years ago
Scott Lahteine
552a327df8
Fix lsDive filename stack overrun (PR#2449)
10 years ago
AnHardt
a6628f12cc
Eliminate the further use of the pin-parameter
10 years ago
AnHardt
8504992e9f
Remove the additional pin variable in Servo.cpp
...
as sugested by @c-born
inhttps://github.com/MarlinFirmware/Marlin/issues/1885#issuecomment-92618240
10 years ago
AnHardt
ed6598adf5
Corrected Bed Height vs. Bed Topology for verbosity > 3
...
and cleaned out some tabs.
Everything else is a rebased PR#2017 as proposed by @CptanPanic
10 years ago
brian
62302ceb9e
Add calculation of difference between auto-correct bed level plane, and measured topo map.
10 years ago
Scott Lahteine
de25a48dec
Remove PID examples from preconfigured configs
10 years ago
Scott Lahteine
7456710a1f
Update configs formatting
10 years ago
Scott Lahteine
391386dd94
Update configs for new servo deactivation
10 years ago
AnHardt
5243d8b523
Deactivate DEACTIVATE_SERVOS_AFTER_MOVE by default
10 years ago
AnHardt
49609f6c14
Activate the new servo.move() function
...
by replacing the sequences (attach, write, delay, detach), and their conditions with the new function in Marlin.main.cpp
and removing the old configuration in the ABL part of Configuration.h
10 years ago
AnHardt
40b6edcad7
Introduce DEACTIVATE_SERVOS_AFTER_MOVE in Configuration.h
...
DEACTIVATE_SERVOS_AFTER_MOVE is ought to replace PROBE_SERVO_DEACTIVATION_DELAY.
But it will work on all servo moves, not only the probe servo moves.
10 years ago
AnHardt
2ddb2a2be9
Add Servo::move() to servo.cpp
...
move(pin, angel) - Sequence of attach(pin), write(angel),
if DEACTIVATE_SERVOS_AFTER_MOVE is defined waits SERVO_DEACTIVATION_DELAY, than detaches.
As we have jitter on the servos during moves of the steppers, and detaching them improves this behaviour,
the usual sequence to handle a servo movement is:
attach(pin)
write(angel)
delay(until the servo finished the move)
detache()
Here a function to handle the complete sequence.
10 years ago
mkile
8a01e5fb7a
Update Russian translation (PR#2443)
...
Slightly updated translation.
10 years ago
Richard Wackerbarth
e83575537a
Compiler defines USBCON for USB devices (PR#2433)
10 years ago
ayberkozgur
7268d46508
Always calculate extruder temperature PID d term (PR#2432)
10 years ago
Scott Lahteine
87a872e103
Use st_get_position_mm where possible (PR#2411)
10 years ago
Scott Lahteine
2e0da8abdc
Allow N to take a negative argument (PR@2402)
10 years ago
Scott Lahteine
447dbd6fa5
Add STEPPER_RESET_PIN support
10 years ago
Scott Lahteine
a0351bdb73
Remove STEPPER_RESET_FIX option
10 years ago
Scott Lahteine
6b1b8cb2b3
Also nullify spaces before the checksum asterisk (PR#2409)
10 years ago
Scott Lahteine
8e61314323
Use RIGIDBOT_PANEL for consistency with online docs
10 years ago
Scott Lahteine
4b204da3c1
Cleanup of pins_RAMPS_13.h
10 years ago
Scott Lahteine
536f86e896
RigidBot CONTROLLERFAN_PIN in Configuration_adv.h
10 years ago
Scott Lahteine
f068e46661
RigidBoard include for pins.h
10 years ago
Scott Lahteine
9ebcae496d
RIGIDBOARD / RIGIDPANEL
10 years ago
Scott Lahteine
c3c605c658
Move note about LiquidTWI2 to Configuration.h (PR#2406)
10 years ago
Scott Lahteine
4e9d658141
Prevent a hanging SERIAL_ECHO_START in M111
10 years ago
Scott Lahteine
bc0fdbe88e
Use SERIAL_EOL in SERIAL_PROTOCOLLN macros
10 years ago
Scott Lahteine
d78ebbc0e9
Remove unused MSG_OK_B and MSG_OK_T
10 years ago
Scott Lahteine
6b494c1535
Use disable_all_heaters in M111
10 years ago
Scott Lahteine
15190d40df
Add extra EOL after M111
10 years ago
AnHardt
0e1cf78f5c
Remove code for testing if probing range is too small (PR#2390)
...
becaue it is over-restrictive and superseeded by the now working tests
if the probe-recktangle can be reached. See iss#2366
10 years ago
AnHardt
d421f5250d
Correct the sign of zprobe_zoffset for G29 (PR#@391)
...
Sign flipped with #2167 .
See also comments
https://github.com/MarlinFirmware/Marlin/issues/2040#issuecomment-118568355
and following.
10 years ago
Scott Lahteine
52fcc743ab
Replace "target" with "destination" in M600 (PR#2374)
...
- Also fix a bug in `M600` where `Z_MAX_ENDSTOP_INVERTING` is being
used as the index into the `destination[AxisEnum]` array.
10 years ago
Scott Lahteine
a5033c3652
Enable LCD_PIN_RESET if it exists (PR#2375)
10 years ago
AnHardt
23c8c5348f
Z-height fix V2b (PR#2351)
...
here the other two occurences of `Z_PROBE_OFFSET_FROM_EXTRUDER` are
replaced with `zprobe_zoffset`.
10 years ago
Todd Swindoll
a111fbbd0a
z-probe offset fix (PR#2361)
...
verified via 1.0.2 tag that compiles by multiple people,
credit for the fix goes to paulusjacobus for the initial find and
sniffle for the correction so M851 works.
10 years ago
Scott Lahteine
42465ee444
Cleanup of comments & spacing
10 years ago
Scott Lahteine
9682ed455e
Fix comment on M83, add comment to prepare_move
10 years ago
Scott Lahteine
bb44fe17cf
Fix typo in buzzer.h endif (PR#2337)
10 years ago
AnHardt
36746143a1
Correct output of M48 (PR#2336)
...
n_samples is an uint8_t .
Got printouts like:
50 of 2 ...
10 years ago
Scott Lahteine
f6ca5a8da8
Allow "M110 N123" without a checksum
10 years ago
Scott Lahteine
aaad65ff5d
Include a comment documenting M110
10 years ago
Scott Lahteine
862c72b030
Put the mandatory test of gcode_N first
10 years ago
Scott Lahteine
30976f9773
Allow M110 to handle a second N argument
10 years ago
Scott Lahteine
d135b15bb8
Init all endstop bits to 0 (PR#2332)
10 years ago
Scott Lahteine
5ccb1c9e7d
Use millis for M600 audio feedback interval
10 years ago
Scott Lahteine
fb16a83b8a
Cleanup M600 documentation comments
10 years ago
Scott Lahteine
97ec224d72
Replace target with destination in M600
10 years ago
Scott Lahteine
4ce9ddbb74
Check the temperature before filament change
10 years ago
Jaime van Kessel
b8b5762e55
Update Ultimaker URL
10 years ago
Jaime van Kessel
d5bfbf5a59
Added correct dutch translation for calibrate.
10 years ago
Scott Lahteine
149c474e55
Updated Russian language (PR#2325)
...
Gleaned from
https://github.com/MarlinFirmware/Marlin/commit/4ac14a7e5fa8e6e395436664
8976eafd1ae220ae
10 years ago
AnHardt
722829b058
Move buzzing code to buzzr.h & buzzer.cpp (PR#2307)
...
at least the lcd independent part from Marlin_main.cpp.
10 years ago
AnHardt
c461975140
Rename and repair MELZI_1284 (PR#2301)
...
to MELZI_MAKR3D.
Fix for #2288
As the normal MELZI also can have a 1284.
10 years ago
schlotzz
1e9cf905c7
Enable ZigZag AutoBedLeveling on Deltas (PR#2273)
...
ZigZag has been disabled by fault due to do_topography_map
10 years ago
Scott Lahteine
ec93383ec8
Add SanityCheck for bed probe position settings (PR#2282)
10 years ago
Scott Lahteine
dc40a5f6e0
Patch up more outdated config lines
10 years ago
Scott Lahteine
98c9111a7d
Update delta configs with latest settings
10 years ago
Scott Lahteine
e6baf8afd9
Fix up allen key settings in delta configs
10 years ago
Scott Lahteine
3b293fc5d1
Move Delta settings lower in delta files
10 years ago
Scott Lahteine
df21857583
Move extruder offset settings next to extruders setting
10 years ago
Scott Lahteine
2dd1859247
Cleanup spaces and comments in configs and conditionals
10 years ago
Scott Lahteine
a274769f4f
Clean up spacing and comments
...
Also clean up some trailing spaces in a few other sources
10 years ago
Scott Lahteine
d3bce05d54
Fix up spacing for filament sensor values
10 years ago
Scott Lahteine
b4b10a57fe
Fix configurator section directives and values lists
10 years ago
Scott Lahteine
bba14dcbe6
Move Z Safe Homing point to the middle of the movement range
10 years ago
Scott Lahteine
318318b02f
Add pins_RAMPS_13_EFB.h to reduce redundancy
10 years ago
Scott Lahteine
346c8b339b
Remove a test from pins_RAMPS_13.h
...
- Add 3 new lines to `pins.h` to remove 2 redundant tests in
`pins_RAMPS_13.h`
10 years ago
AnHardt
b93cddfcc9
Add lost MKS_BASE to pins.h (PR#2297)
10 years ago
AnHardt
6ab7b560af
Rework buzzing (PR#2296)
...
by:
Moving HAS_LCD_BUZZ macro to Coditionals.h
Renaming HAS_LCD_BUZZ to HAS_BUZZER to make clear is has nothing to do with the lcd.
Removing the ULTRALCD condition.
Moving declaration of lcd_buzz() out of the ULTRA_LCD block in ultralcd.h
Moving definition of lcd_buzz() out of the ULTIPANEL block in ultralcd.cpp
Renaming lcd_buzz() to buzz() to make clear is has nothing to do with the lcd.
All buzzing code is now only dependent on the existence of a BEEPER-pin or the definition of a LCD_USE_I2C_BUZZER.
To do: Check the conditions for the BEEPER-pin in all pin-files.
10 years ago
Scott Lahteine
29122db2fa
Fix ULTRA_LCD spelling in HAS_LCD_BUZZ
10 years ago
Scott Lahteine
1d94d098bf
Formatting tweaks as part of fixing issue 1497
10 years ago
Scott Lahteine
e602c28ad9
Set auto fan pins to OUTPUT during init
...
Fixes the problem of these pins being left in INPUT state, as described
in #1497
10 years ago
Scott Lahteine
90f858aa85
Use translated strings for axis movement (PR#2280)
...
Suggest we use the translated strings here. They use (except for
German) the phrasing “Move X” instead of just the axis letter, but they
should fit the available space. The “Extruder” string would be the
same, except it will be translated.
10 years ago
Scott Lahteine
e2a4a83586
Don't re-apply Z_RAISE_BETWEEN_PROBINGS in probe_pt (PR #2281 )
10 years ago
Scott Lahteine
6b1b3adaf0
Consistent punctuation in SanityCheck errors (PR#2283)
10 years ago
MagoKimbra
eb81982fcd
Fix error next command in autotune (PR#2274)
...
Now send only temperature for T or B, but not send OK.
Host interprets the line to show the right temperature, but not in
response to M105 then stop and send commands until it ends the autotune.
10 years ago
AnHardt
55b23c896a
Optimise out_of_range_error() (PR#2265)
...
by avoiding the strncopy()
10 years ago
filipmu
b0860adab6
Fix volumetric multiplier display for filament sensor (PR#2264)
...
The volumetric multiplier display needs to be multiplied by 100 in order to make it an integer for display purposes.
10 years ago
AnHardt
45642b7fe8
Respect DISABLE_AXIS settings (PR#2216)
...
when DEFAULT_STEPPER_DEACTIVE_TIME is over
instead of simply turn off all.
10 years ago
wurstnase
c85a486445
make the dual z-endstop optional (PR#2277)
...
it's disabled by default
10 years ago
Scott Lahteine
962b107341
Prevent current_command_args from bypassing nul (PR#2270)
10 years ago
Richard Wackerbarth
06ae832276
Deprecate Support for Arduino IDE < 1.0.5
...
Note that newer versions of the IDE can still
be made to support compilation for the older boards.
10 years ago
Scott Lahteine
ff6081be3a
Parse N[0-9]+[ ]* differently (PR #2263 )
...
More general solution to skip N[0-9]+[ ]* in the parser as in #2218
10 years ago
Scott Lahteine
aad121864e
Include "Z" in M851 report
10 years ago
Scott Lahteine
96a3fba8ac
Reverse the sign of zprobe_zoffset
...
- When editing on the LCD, minus now means below the nozzle
- Stores the opposite sign in EEPROM, so bumped to “V20”
10 years ago
fmalpartida
f92907183c
Updated SAV MkI pin header.
10 years ago
Richard Wackerbarth
58941e543e
ELB_FULL_GRAPHIC_CONTROLLER_SDCARDDETECTINVERTED removed
...
#defining something just to define something else doesn’t
make sense
If you want SDCARDDETECTINVERTED, just define it yourself.
If the previous code was intended to define, undefined and then again define the term, that code is improper.
10 years ago
CONSULitAS
788eb6e647
planner.cpp: remove tab
...
planner.cpp: single evil and hidden tab removed ♻️ 😏
10 years ago
CONSULitAS
3a5963c0e7
Configuration_adv.h: Add FAN_MIN_PWM for slow fan stopping issue …
...
* all Configuration_adv.h: Add #define FAN_MIN_PWM for slow fan stopping
issue
* for K8200: uncommented with tested (and working) values
10 years ago
CONSULitAS
e55e65d1e4
planner.cpp: Add FAN_MIN_PWM for slow fan stopping issue …
...
@CONSULitAS
planner.cpp: Add FAN_MIN_PWM for slow fan stopping issue (V2.1 with
macro and linear scaling)
@thinkyhead thanks for idea on linear scaling
10 years ago
paclema
8d295547be
* Auto filament change on CHANGEFILAMENT feature. Now you can activate this option that extrude filament until you press the button.
10 years ago
atfield90
6d0e91328d
Renamed Board_megatronics_1 to Board_minitronics
10 years ago
atfield90
c4a2e5ac23
Renamed Pins_megatronics_1 to Pins_minitronics
10 years ago
atfield90
2076906aaa
Renamed Pins_megatronics_1 to Pins_minitronics
10 years ago
tonokip
10733a2bb0
added minirambo pin definitions. V2
10 years ago
Richard Wackerbarth
303d47228e
Define Probe Path in new format
10 years ago
Richard Wackerbarth
ad09d6a60f
3 Step Allen Key Probe
10 years ago
Richard Wackerbarth
8359cdf01d
Check compatibility for Teensy-based processor
...
The instruction say to set a #define in fastio.h
However, that value is not included before this test.
10 years ago
Ed Boston
08968c29bb
Adding ELB_FULL_GRAPHIC_CONTROLLER_SDCARDDETECTINVERTED to Examples
10 years ago
Ed Boston
fed18bcc20
Removed SDSLOW for ELB_FULL_GRAPHIC_CONTROLLER
...
Hardware changes has removed the need for this option.
10 years ago
Ed Boston
b94a0e1501
Added ELB_FULL_GRAPHIC_CONTROLLER_SDCARDDETECTINVERTED
...
The new define allows the sd card detect to be inverted or not from
Configuration.h
10 years ago
Ed Boston
bc205c76a3
SDCARDDETECTINVERTED problems
...
Fixed an error where SDCARDDETECTINVERTED was being defined/undefined
improperly
10 years ago
AnHardt
e400fce271
Merge pull request #2221 from MagoKimbra/Dryrun
...
Insert Debug DRYRUN Repetier Host compatible
10 years ago
AnHardt
163a9ff58e
Merge pull request #2230 from AnHardt/psm
...
Fix thermal protection state machine target temp. V2
10 years ago
AnHardt
c3fe6e61ae
Merge pull request #2229 from AnHardt/position-out-of-range
...
Fix out_of_range_error()
10 years ago
MagoKimbra
4db8d2def4
Moved MSG_DEBUG in language.h
10 years ago
AnHardt
b7e9ba7591
Back to 1.0.3 dev - for now
10 years ago
AnHardt
d1f4471000
Merge pull request #2146 from Wackerbarth/Versioning
...
Versioning
10 years ago
AnHardt
b1404a0743
fix thermal protection state machine target temp. V2
...
If the target temperature is changed then it would always stay in the reset state.
Thanks to @tonokip.
Replaces #2119
10 years ago
AnHardt
17b0ec84ed
Fix out_of_range_error()
...
For sprintf_P() the first parameter has to be a `char*` not `const char*`.
10 years ago
AnHardt
35af5ef23e
Merge pull request #2225 from Wurstnase/naming
...
consistency name for multiplier
10 years ago
wurstnase
e7e964432b
consistency name for multiplier
...
replace extruder_multiply with extruder_multiplier
like feedrate_multiplier or volumetric_multiplier
10 years ago
AnHardt
d4c6fc5d0a
Merge pull request #2223 from AnHardt/dualz-semicolon
...
Add a semicolon to make Z_DUAL_STEPPER_DRIVERS compile again.
10 years ago
AnHardt
0d9d21d15f
Add a semicolon to make Z_DUAL_STEPPER_DRIVERS compile again.
10 years ago
MagoKimbra
76306f9073
Insert Debug DRYRUN Repetier Host compatible
10 years ago
MagoKimbra
881146bc22
Fix problem Width Cura
10 years ago
fmalpartida
11e3f3375d
Merge commit '764e61708b8e73410c7819d59c4970d7089ca6f5' into bugFixing
...
Updated LCD wiki location.
10 years ago
Alexey Shvetsov
a8670b66a7
Update ru translation
...
Signed-off-by: Alexey Shvetsov <alexxy@gentoo.org>
10 years ago
fmalpartida
93da52d011
Added support for OLED SSD1306 I2C based LCDs.
10 years ago
Wurstnase
9c09967803
Merge pull request #2149 from Wurstnase/enstop_bits
...
faster compare
10 years ago
wurstnase
0f3f7d6835
clean up double endstops
10 years ago
AnHardt
9d2a980bcf
Merge pull request #2170 from thinkyhead/beep_M600_elsewise
...
Slight size reduction by adding idle()
10 years ago
AnHardt
2728dc0606
Merge pull request #2194 from thinkyhead/reduce_strings
...
Redo "invalid extruder" to save 304 bytes
10 years ago
Scott Lahteine
be5236e839
Reduce setTargetedHotend by removing the switch
10 years ago
Scott Lahteine
06f401e7e5
Redo "invalid extruder" to save 264 bytes
...
- Use `setTargetedHotend` in `M200`, as with other commands that use
`T` for the extruder
- Synthesize the "invalid extruder" message, obviating several long
strings
10 years ago
Scott Lahteine
1a882bcc2e
Merge pull request #2193 from thinkyhead/ignore_unrecognized_commands
...
Ignore unknown commands if they start with G, M, or T
10 years ago
Scott Lahteine
a672872717
Merge pull request #2187 from AnHardt/MAX6675M105
...
Print active extruder with M105 for MAX6675
10 years ago
Scott Lahteine
9beed830eb
Drop commented code_is_good lines
10 years ago
Scott Lahteine
068d4a1eb2
Ignore unknown commands if they start with G, M, or T
10 years ago
Scott Lahteine
5824f613ff
Merge pull request #2185 from jothan/bed_integral
...
Separate the maximum integral power for the bed from PID_INTEGRAL_DRI…
10 years ago
Scott Lahteine
c5c9d12630
Merge pull request #2183 from AnHardt/displayinit
...
Initialize the display earlier
10 years ago
Scott Lahteine
ef4becc413
Merge pull request #2188 from AnHardt/FtoN
...
Replace MSG_F? with MSG_N?
10 years ago
Scott Lahteine
0564625757
Update M33 for new gcode parser
10 years ago
AnHardt
f18f689c01
Replace MSG_F? with MSG_N?
...
To avoid double definitions.
I prefer to read N for Number not for Nozzle.
10 years ago
AnHardt
af7e3f5076
Print active extruder with M105 for MAX6675
...
Was omitted when T0 is a MAX6675.
10 years ago
Jonathan Bastien-Filiatrault
d46d9d998e
Add maximum bed integral term in example configurations.
10 years ago
Jonathan Bastien-Filiatrault
e86f2342c0
Separate the maximum integral power for the bed from PID_INTEGRAL_DRIVE_MAX / PID_MAX.
...
My PID_INTEGRAL_DRIVE_MAX was at 96, which was insufficient for my bed
to reach its intended temperature. The head requires a low maximum power since
I run on 24 volts and it has a somewhat low thermal mass.
10 years ago
AnHardt
f0523b5816
Initialize the display earlier
...
to have it ready to display errors during (temperature)-setup.
10 years ago
Scott Lahteine
790c697c19
Fix DEGREES macro
10 years ago
Scott Lahteine
76b4678f99
Merge pull request #2171 from thinkyhead/gcode_110_is_good
...
M110 is a known command
10 years ago
Scott Lahteine
03d5709b09
M110 is a known command
...
- The command parser now displays “unknown command” in more cases.
Known commands must be added to the `switch` inside `process_commands`
to suppress the error.
10 years ago
Scott Lahteine
d76a01194d
Slight size reduction by adding idle()
10 years ago
Richard Wackerbarth
2deb5a8ac5
Temporary Hack
...
REVERT THIS CHANGE
In proper use, we want to force the vendor to update this file to reflect distribution parameters
However, until most users have converted to automatic versioning,
we “grant them a pass”
10 years ago
Richard Wackerbarth
b5743d6927
Use SOURCE_CODE_URL rather than FIRMWARE_URL
10 years ago
Richard Wackerbarth
5ea139fd79
Revised Versioning mechanism
10 years ago
AnHardt
da246f5cb1
Activate BED_MINTEMP error.
...
And call _temp_error() directly for ERR_MAXTEMP_BED to avoid the only one time use of bed_max_temp_error().
Includes #2156 .
10 years ago
AnHardt
959da98d8e
Call kill() only once when triggered by a temperature error
...
to avoid stack overflow when called from interrupt.
Some clean up for calls of disable_all_heaters().
'disable_all_heaters()' is called in kill() and again when 'killed' is already set inside _temp_error().
10 years ago
Scott Lahteine
68f6f149d0
Reduce code size with out_of_range_error function
...
- Affects code size when automatic bed leveling is enabled
10 years ago
wurstnase
94120740d8
faster compare
...
!(~(ab)&0x3) and ab == 0x3 are equal
10 years ago
Scott Lahteine
c9141e604a
Merge pull request #2145 from thinkyhead/gcode_folding
...
Indentation in process_commands
10 years ago
Scott Lahteine
b55f8718c3
Indent G90/G91, G92
10 years ago
Scott Lahteine
b0d520b109
Indent G30, G31/G32
10 years ago
Scott Lahteine
ffe27a6225
Indent G29
10 years ago
Scott Lahteine
86083badc2
Indent G4, G10/G11, G28
10 years ago
Scott Lahteine
47d7a9cb5e
Indent G2/G3
10 years ago
Scott Lahteine
350f239d84
Indent G0/G1
10 years ago
Scott Lahteine
672b0c1fd3
Cleanup pins in RAMPS_13_EFB boards
10 years ago
Scott Lahteine
15a2351675
No need for +1 on initial seen_pointer
10 years ago
Scott Lahteine
550dd87b2a
Set seen_pointer before calling code_value
10 years ago
Scott Lahteine
38cc0b93c6
Merge pull request #1874 from AnHardt/Bulgarian
...
Introduction of Bulgarian - language_bg.h
10 years ago
Scott Lahteine
04a1622172
Merge pull request #2127 from Wackerbarth/Kossel_Pro
...
Kossel Pro
10 years ago
Scott Lahteine
81c2ca3e10
Merge pull request #2131 from thinkyhead/bq_is_ramps_13_efb
...
Witbox and Hephestos are RAMPS EFB
10 years ago
Scott Lahteine
f919a2fed1
Merge pull request #2134 from AnHardt/preheat-all
...
Shift call of start_watching_heater() into setTargetHotend()
10 years ago
Scott Lahteine
063881b5bd
Fix a couple of doubled semicolons
10 years ago
AnHardt
94dff5b36a
Merge pull request #2137 from thinkyhead/tweak_swh
...
Move millis call in start_watching_heater
10 years ago
Scott Lahteine
70d2f48d4e
Merge pull request #2136 from thinkyhead/M303_suppress_error
...
Suppress the line mismatch error after M303
10 years ago
AnHardt
0c0ace2a04
Remove start_watching_heater() fom M104 and M109
10 years ago
Scott Lahteine
00716d0ca0
Small start_watching_heater adjustment
10 years ago
Scott Lahteine
834747deb7
Merge pull request #2135 from Wurstnase/new_endstop_bits
...
new endstop bits
10 years ago
Scott Lahteine
bde9c70d42
Suppress the line mismatch error after M303
10 years ago
Scott Lahteine
50bd7493cc
Merge pull request #2108 from thinkyhead/m33_long_filename_host_support
...
M33 LONG_FILENAME_HOST_SUPPORT
10 years ago
Scott Lahteine
4d11b29959
Merge pull request #2113 from thinkyhead/command_sanitizer
...
Command sanitizer
10 years ago
wurstnase
ff98b8632b
new endstop bits
10 years ago
AnHardt
9b0fa9c309
Changed dependency of start_watching_heater() in setTargetHotend() to THERMAL_PROTECTION_HOTENDS
10 years ago
AnHardt
bc0764894a
Shift call of start_watching_heater() into setTargetHotend()
...
to warrant watching is set or reset.
Make setTargetBed() in _lcd_preheat() dependant of TEMP_SENSOR_BED.
Use disable_all_heaters() in lcd_cooldown() and abort_on_endstop_hit.
10 years ago
Richard Wackerbarth
b878bc5620
Introducing the Kossel Pro Build Configuration
10 years ago
Richard Wackerbarth
1d8f61ca8a
AT90USB is defined in pins.h
10 years ago
Richard Wackerbarth
735bf2d35f
Describe Custom M Code
10 years ago
Scott Lahteine
f39658c822
M120 and M121 are reversed
10 years ago