6797 Commits (a2babb532d3425ce91f77391a2d4c6de09c91497)

Author SHA1 Message Date
Scott Lahteine a2babb532d Merge pull request #7217 from benlye/add-kill-action
Add configurable action command to send when printer is killed
8 years ago
Dave Johnson 20f6676d63 DISABLE_[XYZ] compatibility check
DISABLE_[XYZ] is incompatible with HOME_AFTER_DEACTIVATE and Z_SAFE_HOMING
8 years ago
Ben Lye c28749a567 Add kill action
Sends pre-defined string as action command when printer is kill.
8 years ago
Scott Lahteine df87278fce Add "CAP:PRINT_JOB:1" (M75 / M76 / M77) to M115 output 8 years ago
Scott Lahteine 4be8d7720e Fix spelling of "Chinese" 8 years ago
LVD-AC 567941e341 Fix for issues #6997 and #7152
Probing with the effector in the printing area, but an eccentric probe (e.g. allen key) outside it but still touching the bed gives meaninfull information for calibration. Since calibration is most accurate when probing as close to the towers as possible the testing was way to restrictive hence this fix.
8 years ago
Scott Lahteine 57fff2e95e Merge pull request #7219 from thinkyhead/bf_update_git_scripts
Update Marlin+git helper scripts
8 years ago
Scott Lahteine 6a3967ee33 Corrections for probe_pt parameters 8 years ago
Scott Lahteine 534bffa7a9 Correct comment on ABL G29 8 years ago
Scott Lahteine e1e1a0c344 Provide a default CUSTOM_BOOTSCREEN_TIMEOUT 8 years ago
Scott Lahteine 69297b2d7b Make all EEPROM optimization options available 8 years ago
Scott Lahteine d609489b22 Drop setup_homepin 8 years ago
Scott Lahteine 167169e1bf Sanity check for a real probe with M48 8 years ago
Scott Lahteine 395a9f59ac Merge pull request #7211 from thinkyhead/bf_lcd_bootscreen
Use lcd_bootscreen for both
8 years ago
Scott Lahteine 14663efe0d Merge pull request #7210 from fiveangle/printrboard_revf_cleanup
Printrboard RevF cleanup
8 years ago
Scott Lahteine ae5923a3d0 Make lcd_bootscreen common to both 8 years ago
Scott Lahteine 859248433f Patch for gcode debug 8 years ago
Dave Johnson 09c90c2f6c Printrboard RevF Cleanup
-Update Arduino IDE extension descriptions
-Set default motor currents if not defined in Configuration_adv.h
-Support for MINIPANEL LCD
-Support for choosing internal or panel SD
8 years ago
Scott Lahteine 232a10410d LCD_FOR_MELZI 8 years ago
Scott Lahteine 76c92a1fab Clean up some trailing spaces 8 years ago
Scott Lahteine cf96109056 Implement the EEPROM_CHITCHAT option 8 years ago
Scott Lahteine dcec7178d1 Expose DISABLE_M503 option as a test option 8 years ago
Scott Lahteine 3e78a01262 Merge pull request #7204 from thinkyhead/bf_update_ubl_lcd
UBL radar map corrections
8 years ago
Tom 1ff7d10c80 Add configuration for Infitary M508 (i3 clone)
Based on Infitary's own firmware settings.
8 years ago
Scott Lahteine 4cb45c10dd Patch ubl lcd mesh map indentation 8 years ago
Scott Lahteine abd6ba62b4 Some cleanups for ubl lcd mesh map 8 years ago
Scott Lahteine f17bae1f70 Changes for ubl_lcd_map_control patch 8 years ago
Tannoo 8e0f3b7eba UBL radar map corrections 8 years ago
Bob-the-Kuhn fcceed5be6 intermittent Teensy & G26 compile problem
===============================================

also an issue with ubl_motion.cpp
8 years ago
Scott Lahteine 30b327d24c Finish the solution for #7166 8 years ago
Scott Lahteine 6c97c5595c Add a sanity check for DELTA_AUTO_CALIBRATION 8 years ago
Bob-the-Kuhn e6e3132f79 make LETTTER_OFF return values that match param indices range 8 years ago
Bob-the-Kuhn bfbf5f8200 correct value_bool() when FASTER_GCODE_PARSER is enabled
Also corrected compile issue when DEBUG_GCODE_PARSER and
AUTO_BED_LEVELING_UBL are both enabled.
8 years ago
Scott Lahteine 406ef69702 Move Anet A8 config to subfolder 8 years ago
Scott Lahteine 379926961c Add Anet A6 config, edit Anet A8 config 8 years ago
Scott Lahteine 5b03f23fa2 Bring configurations up to date, fix some comments 8 years ago
Scott Lahteine e3cedfa0ec Fix a compiler warning 8 years ago
Scott Lahteine bb0508b6cf Fix comment in M115 code 8 years ago
Scott Lahteine 85777a56c6 Add A (action) and E (echo) parameters to M118 8 years ago
Scott Lahteine d1e8d4cd9d Merge pull request #7167 from thinkyhead/bf_20x4_lcd_update
UBL Map Cleanup and LCD display
8 years ago
Scott Lahteine b492e0878d Changes to reduce and simplify 8 years ago
Ben Lye 98d362c2da Adding M118 command to send text to serial
Allows the user to send text to the serial console in order to
communicate with a host - sending debuging information or action
commands, for example.  Text must begin with '//' and this is added if
it is not already present at the beginning of the string.
8 years ago
Tannoo 80abc872f3 Updated to better support the coming "radar" 8 years ago
Tannoo e90cbf5c16 UBL Map Cleanup 8 years ago
Scott Lahteine fc140c4962 Followup for I2C_POSITION_ENCODERS 8 years ago
Scott Lahteine f4246dc8ff Merge pull request #7165 from thinkyhead/bf_parser_shorthand
Use parser.seenval, add shorthand functions
8 years ago
Scott Lahteine bd776df8c1 Optimize seen_axis by moving 'X' to index 24 8 years ago
Scott Lahteine 05449cf6ee Add shorthand value accessors to gcode.h 8 years ago
Scott Lahteine 12f092c812 Cleanups to gcode.h, use seenval() 8 years ago
Scott Lahteine 941943c167 Apply const, spacing, etc. 8 years ago